Model 805 Accelerometer
Model 805 Rev C www.meas-spec.com 02/27/2014
32 Journey Ste. 150 Aliso Viejo, CA 92656 949-716-5377 t&m@meas-spec.com
performance specifications
PART NUMBERING Model Number+Range
805-GGGG -XX
l l_____ Optional Stud Dash Number Dash Number Stud Options
l_____ Range (0050 is 50g) -01 M3 x 0.5 6g
Example: 805-0050
Model 805, 50g
The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this
information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right
to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of
its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications.
All operating parameters must be validated for each customer application by customer’s technical experts. Measurement Specialties, Inc. does not convey any license
under its patent rights nor the rights of others.
All values are typical at +24°C, 100Hz and 4mA excitation unless otherwise stated. Measurement Specialties reserves the right to update and
change these specifications without notice. Standard product parameters are described in PSC-1001 for Embedded AC Accelerometers.
±10% (see Note 1 for ±5% option)
Transverse Sensitivity (%)
Full Scale Output Voltage (V)
Case grounded to mounting surface
Operating Temperature (°C)
+120°C option, see Note 2
Adhesive or Circuit Board (M3 Stud Mounting for -01 Option)
1 Contact factory for model number to order with ±5% sensitivity tolerance
2 Contact factory for model number to order with +120°C operating temperature
Calibration supplied: CS-SENS-0100 NIST Traceable Amplitude Calibration at 100Hz
Wiring color code: See schematic