TPM Multianode Tantalum Ultra Low ESR Capacitor Low ESR, high capacitance and high ripple current are the key parameters for processor filtering. Multianode configuration within a standard E case package meets these requirements. Parameters such as ESR 15m, capacitance 1500F and ripple current above 4A rms makes TPM series ready to use with the latest processor families. TPM D case capacitors in addition are using a "mirror" multianode construction that reduces self-inductance ESL from 2.4nH to 1.0nH and thus frequency range is extended to about 500 kHz. MULTIANODE CONSTRUCTION CASE DIMENSIONS: millimeters (inches) Code EIA Code L0.20 (0.008) W+0.20 (0.008) H+0.20 (0.008) A+0.30 (0.012) W10.20 (0.008) -0.10 (0.004) -0.10 (0.004) -0.20 (0.008) D 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) E 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) 3.10 (0.120) 1.40 (0.055) 4.40 (0.173) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) V 7361-38 7.30 (0.287) 6.10 (0.240) 3.45 0.30 (0.136 0.012) Y 7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) max S Min. W1 dimension applies to the termination width for A dimensional area only. For part marking see page 177 HOW TO ORDER TPM E 108 * 004 R 0018 Type Case Size See table above Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Capacitance Tolerance K=10% M=20% Rated DC Voltage 002=2.5Vdc 004=4Vdc 006=6.3Vdc 010=10Vdc 016=16Vdc 020=20Vdc 025=25Vdc 035=35Vdc 050=50Vdc Packaging R = 7" T/R Lead Free S = 13" T/R Lead Free H = 7" Reel Tin Lead K = 13" Reel Tin Lead Maximum ESR in Milliohms See note below NOTE: The EIA & CECC standards for low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalog limit post mounting. TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Rated Voltage (VR) Category Voltage (VC) Surge Voltage (VS) Surge Voltage (VS) Temperature Range: Reliability: 38 +85C: +125C: +85C: +125C: All technical data relate to an ambient temperature of +25C 10 F to 2200 F 10%, 20% 2.5 4 6.3 10 16 20 25 35 50 1.7 2.7 4 7 10 13 17 23 33 3.3 5.2 8 13 20 26 32 46 65 2.2 3.4 5 8 13 16 20 28 40 -55C to +125C 1% per 1000 hours at 85C, VR with 0.1/V series impedance, 60% confidence level TPM Multianode Tantalum Ultra Low ESR Capacitor CAPACITANCE AND RATED VOLTAGE RANGE LETTER DENOTES CASE SIZE ESR LIMIT IN BRACKETS Capacitance F Code 2.5V (e) 4V (G) 6.3V (J) Rated Voltage DC (VR) to 85C 10V (A) 16V (C) 20V (D) 6.8 10 15 22 33 47 68 100 685 106 156 226 336 476 686 107 Y(45)(M) 150 157 Y(45)(M) 25V (E) 35V (V) E(60,100) E(50,65) E(55,65) 50V (T) E(120) E(75,100) E(75,100) E(45,55) (M) 220 227 Y(30) 330 337 D(25,35) D(25,35) D(35) D(35) E(23,35) 470 477 D(25,35) D(30) E(18,23,30) E(23,30)(M) 680 687 1000 108 1500 2200 158 228 D(25) E(18,23) E(18,23), V(23) D(25,45) D(25) V(25)* E(18,23), V(18) E(12,15,18) E(15,18) E(18)(M) E(35,45) D(45)* E(30,40) E(25,40) E(35) Y(50) Developmental Ratings - subject to change, AVX reserve rights to change ESR specification prior to release. *Violet - Please Contact Manufacturer Released codes (M tolerance only) Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards. 39 TPM Multianode Tantalum Ultra Low ESR Capacitor RATINGS & PART NUMBER REFERENCE AVX Part No. Rated Case Capacitance Voltage Size (F) (V) DCL DF ESR (A) % Max. (m) Max. Max. @100kHz 100kHz Ripple Current Ratings (A) 25C 85C 100kHz Ripple Voltage Ratings (V) 125C 25C 85C 125C 2.874 4.269 3.818 3.486 3.486 1.277 1.897 1.697 1.549 1.549 0.080 0.057 0.064 0.070 0.070 0.072 0.051 0.057 0.063 0.063 0.032 0.023 0.025 0.028 0.028 2.874 2.429 2.874 2.429 2.874 3.486 3.084 2.874 2.142 3.486 3.084 3.581 3.818 3.486 1.277 1.080 1.277 1.080 1.277 1.549 1.370 1.277 0.952 1.549 1.370 1.592 1.697 1.549 0.080 0.094 0.080 0.094 0.080 0.070 0.079 0.080 0.107 0.070 0.079 0.072 0.064 0.070 0.072 0.085 0.072 0.085 0.072 0.063 0.071 0.072 0.096 0.063 0.071 0.064 0.057 0.063 0.032 0.038 0.032 0.038 0.032 0.028 0.032 0.032 0.043 0.028 0.032 0.029 0.025 0.028 2.381 2.874 2.429 2.624 3.486 3.084 2.700 3.486 3.084 3.168 1.058 1.277 1.080 1.166 1.549 1.370 1.200 1.549 1.370 1.408 0.079 0.080 0.094 0.087 0.070 0.079 0.090 0.070 0.079 0.081 0.071 0.072 0.085 0.079 0.063 0.071 0.081 0.063 0.071 0.073 0.032 0.032 0.038 0.035 0.028 0.032 0.036 0.028 0.032 0.032 1.944 1.944 2.429 2.429 3.084 2.500 3.084 2.700 0.864 0.864 1.080 1.080 1.370 1.111 1.370 1.200 0.097 0.097 0.094 0.094 0.079 0.097 0.079 0.090 0.087 0.087 0.085 0.085 0.071 0.087 0.071 0.081 0.039 0.039 0.038 0.038 0.032 0.039 0.032 0.036 1.200 1.039 1.315 1.039 0.090 0.104 0.082 0.104 0.081 0.094 0.074 0.094 0.036 0.042 0.033 0.042 1.111 0.980 1.111 0.097 0.110 0.097 0.087 0.099 0.087 0.039 0.044 0.039 0.980 0.886 0.110 0.122 0.099 0.110 0.044 0.049 0.849 0.657 0.930 0.815 0.886 0.815 0.127 0.164 0.116 0.132 0.122 0.132 0.115 0.148 0.105 0.119 0.110 0.119 0.051 0.066 0.046 0.053 0.049 0.053 0.600 0.759 0.657 0.759 0.657 0.180 0.142 0.164 0.142 0.164 0.162 0.128 0.148 0.128 0.148 0.072 0.057 0.066 0.057 0.066 2.5 Volt @ 85C (1.7 Volt @ 125C) TPMD108*002#0025 TPME158*002#0012 TPME158*002#0015 TPME158*002#0018 TPME228M002#0018 D E E E E 1000 1500 1500 1500 2200 2.5 2.5 2.5 2.5 2.5 25 38 38 38 44 TPMD337*004#0025 TPMD337*004#0035 TPMD477*004#0025 TPMD477*004#0035 TPMD687*004#0025 TPME687*004#0018 TPME687*004#0023 TPMD108*004#0025 TPMD108*004#0045 TPME108*004#0018 TPME108*004#0023 TPMV108*004#0018 TPME158*004#0015 TPME158*004#0018 D D D D D E E D D E E V E E 330 330 470 470 680 680 680 1000 1000 1000 1000 1000 1500 1500 4 4 4 4 4 4 4 4 4 4 4 4 4 4 13.2 13.2 18.8 18.8 27.2 27 27 40 40 40 40 40 40 40 TPMY227M006#0030 TPMD337*006#0025 TPMD337*006#0035 TPMD477*006#0030 TPME477*006#0018 TPME477*006#0023 TPME477*006#0030 TPME687*006#0018 TPME687*006#0023 TPMV687*006#0023 Y D D D E E E E E V 220 330 330 470 470 470 470 680 680 680 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 13.2 19.8 19.8 28.2 28 28 28 41 41 41 TPMY107M010#0045 TPMY157M010#0045 TPMD227*010#0035 TPMD337*010#0035 TPME337*010#0023 TPME337*010#0035 TPME477M010#0023 TPME477M010#0030 Y Y D D E E E E 100 150 220 330 330 330 470 470 10 10 10 10 10 10 10 10 10 15 22 33 33 33 47 47 TPME157*016#0030 TPME157*016#0040 TPME227*016#0025 TPME227*016#0040 E E E E 150 150 220 220 16 16 16 16 24 24 35 35 TPME107*020#0035 TPME107*020#0045 TPME157*020#0035 E E E 100 100 150 20 20 20 20 20 30 TPME686*025#0045 TPME686*025#0055 E E 68 68 25 25 17 17 TPME226*335#0060 TPME226*035#0100 TPME336*035#0050 TPME336*035#0065 TPME476*035#0055 TPME476*035#0065 E E E E E E 22 22 33 33 47 47 35 35 35 35 35 35 8 8 12 12 16 16 TPME106*050#0120 TPME156*050#0075 TPME156*050#0100 TPME226*050#0075 TPME226*050#0100 E E E E E 10 15 15 22 22 50 50 50 50 50 5 7.5 7.5 11 11 8 6 6 6 10 25 12 15 18 18 3.194 4.743 4.243 3.873 3.873 4 Volt @ 85C (2.7 Volt @ 125C) 8 8 8 8 8 6 6 8 8 6 6 6 6 6 25 35 25 35 25 18 23 25 45 18 23 18 15 18 3.194 2.699 3.194 2.699 3.194 3.873 3.426 3.194 2.380 3.873 3.426 3.979 4.243 3.873 6.3 Volt @ 85C (4 Volt @ 125C) 6 8 8 8 6 6 6 6 6 6 30 25 35 30 18 23 30 18 23 23 2.646 3.194 2.699 2.915 3.873 3.426 3.000 3.873 3.426 3.520 10 Volt @ 85C (7 Volt @ 125C) 8 8 8 8 6 6 6 6 45 45 35 35 23 35 23 30 2.160 2.160 2.699 2.699 3.426 2.777 3.426 3.000 16 Volt @ 85C (10 Volt @ 125C) 6 6 6 6 30 40 25 40 3.000 2.598 3.286 2.598 2.700 2.338 2.958 2.338 20 Volt @ 85C (13 Volt @ 125C) 6 6 10 35 45 35 2.777 2.449 2.777 2.500 2.205 2.500 25 Volt @ 85C (17 Volt @ 125C) 6 6 45 55 2.449 2.216 2.205 1.994 35 Volt @ 85C (23 Volt @ 125C) 6 6 6 6 6 6 60 100 50 65 55 65 2.121 1.643 2.324 2.038 2.216 2.038 1.909 1.479 2.091 1.834 1.994 1.834 50 Volt @ 85C (33 Volt @ 125C) 6 6 6 8 8 120 75 100 75 100 All technical data relates to an ambient temperature of +25C. Capacitance and DF are measured at 120Hz, 0.5V RMS with maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. TPM series is MSL level 3 according to J-STD-020C. * Insert K for 10% and M for 20% Capacitance Tolerance 40 1.500 1.897 1.643 1.897 1.643 1.350 1.708 1.479 1.708 1.479 # Standard Plating - Insert R for 7" reel and S for 13" reel # Gold Plating - Insert A for 7" reel and B for 13" reel # Tin Lead - Insert H for 7" reel and K for 13" reel NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.