M5KP5.0A - M5KP110CA(e3) Available 5,000 Watt Transient Voltage Suppressor (TVS) Protection Device Screening in reference to MIL-PRF-19500 available DESCRIPTION This Transient Voltage Suppressor series M5KP5.0A - M5KP110CA provides a range of standoff voltage options from 5.0 to 110 V in unidirectional, bidirectional, RoHS compliant, and SnPb solder dipped options. Multiple advanced screening levels are available for enhanced reliability. Clamping action is almost instantaneous. As a result, they provide effective protection from ESD or EFT per IEC61000-4-2 and IEC61000-4-4, as well as transients caused by inductive switching and RFI. They also protect from secondary lightning effects per 61000-4-5 at the class levels specified below. Important: For the latest information, visit our website http://www.microsemi.com. FEATURES * * * * * * * Available in both unidirectional and bidirectional configurations 3 lot norm screening performed on standby current I D 100% surge tested devices Various screening in reference to MIL-PRF-19500. Refer to HiRel Non-Hermetic Product Portfolio for more details on the screening options (See part nomenclature for all options.) High reliability controlled devices with wafer fabrication and assembly lot traceability Moisture classification is level 1 with no dry pack required per IPC/JEDEC J-STD-020B RoHS compliant versions are available Case 5A (DO-204AR) Package Also available in: P600 package (commercial plastic axial-leaded) 5KP5.0e3 - 5KP250CAe3 DO-13 package APPLICATIONS / BENEFITS * * * * * * * * * (metal axial-leaded) LC6.5A - LC170A Selections for 5.0 to 110 volts stand-off voltage (V WM ) Economical TVS series for thru-hole mounting This M5KPxxx series has a significantly reduced body diameter than the 5KPxxx commercial series for a smaller size footprint often required for aviation and other applications Pico- to nano-second response time Protection from transients due to inductive switching and RFI Compliant to IEC 61000-4-2 and IEC 61000-4-4 for ESD and EFT protection respectively Secondary lightning protection per IEC61000-4-5 with 42 ohms source impedance: Class 1, 2, 3, 4: M5KP5.0A to M5KP110CA Class 5: M5KP5.0A to M5KP110CA (short distance) Class 5: M5KP5.0A to M5KP36CA (long distance) Secondary lightning protection per IEC61000-4-5 with 12 ohms source impedance: Class 1 & 2: M5KP5.0A to M5KP110CA Class 3: M5KP5.0A to M5KP78CA Class 4: M5KP5.0A to M5KP40CA Secondary lightning protection per IEC61000-4-5 with 2 ohms source impedance: Class 2: M5KP5.0A to M5KP70CA Class 3: M5KP5.0A to M5KP36CA Class 4: M5KP5.0A to M5KP18CA RF01010, Rev. B (9/13/13) (c)2013 Microsemi Corporation MSC - Lawrence 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC - Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com Page 1 of 7 M5KP5.0A - M5KP110CA(e3) MAXIMUM RATINGS @ 25 C unless otherwise noted Parameters/Test Conditions Symbol Value TJ and TSTG R JL -65 to +150 20 o R JA P PP 80 5000 o PD 6 (1) 1.56 < 100 <5 3.5 260 Junction and Storage Temperature Thermal Resistance, Junction to Lead @ 0.375 inch (9.5 mm) lead length from body (1) Thermal Resistance, Junction to Ambient (2) Peak Pulse Power Dissipation 10/1000 s Steady-State Power Dissipation @ TL = 25 C 0.375 inch (9.5 mm) from body Unidirectional Tclamping (0 volts to V (BR) min, theoretical) Bidirectional (3) Forward Voltage Solder Temperature @ 10 s VF Unit o C C/W C/W W W ps ns V o C 2 Notes: 1. When mounted on FR4 PC board with 4 mm copper pads (1 oz) and track width 1 mm, length 25 mm. 2. With impulse repetition rate (duty factor) of 0.01 % or less (also Figure 1 and 2). 3. At 100 amp peak impulse of 8.3 ms half-sine wave (unidirectional only). MECHANICAL and PACKAGING * * * * * * * CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating. Solderable per MIL-STD-750, method 2026. MARKING: Part number POLARITY: Cathode indicated by band. No cathode band on bidirectional devices. TAPE & REEL option: Standard per EIA-296 (add "TR" suffix to part number). Consult factory for quantities. WEIGHT: Approximately 1.4 grams See Package Dimensions on last page. PART NOMENCLATURE M 5K P 5.0 C A Reliability Level* M MA MX MXL (*see HiRel Non-Hermetic Product Portfolio) RoHS Compliance e3 = RoHS compliant Blank = non-RoHS compliant 5% Voltage Tolerance Polarity C = Bi-directional Blank = Unidirectional 5 Kilowatt Rating Encapsulated Plastic Package RF01010, Rev. B (9/13/13) (e3) Stand-off Voltage Rating (see Electrical Characteristics table) (c)2013 Microsemi Corporation Page 2 of 7 M5KP5.0A - M5KP110CA(e3) SYMBOLS & DEFINITIONS Definition Symbol V(BR) VW M PPP V (BR) ID IPP VC I (BR) Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by the change in temperature that caused it expressed in %/C or mV/C. Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that may be continuously applied over the standard operating temperature. Peak Pulse Power. The rated random recurring peak impulse power or rated nonrepetitive peak impulse power. The impulse power is the maximum-rated value of the product of I PP and V C . Breakdown Voltage: The voltage across the device at a specified current I (BR) in the breakdown region. Standby Current: The current through the device at rated stand-off voltage. Peak Impulse Current: The maximum rated random recurring peak impulse current or nonrepetitive peak impulse current that may be applied to a device. A random recurring or nonrepetitive transient current is usually due to an external cause, and it is assumed that its effect will have completely disappeared before the next transient arrives. Clamping Voltage: The voltage across the device in a region of low differential resistance during the application of an impulse current (I PP ) for a specified waveform. Breakdown Current: The current used for measuring Breakdown Voltage V (BR) . RF01010, Rev. B (9/13/13) (c)2013 Microsemi Corporation Page 3 of 7 M5KP5.0A - M5KP110CA(e3) ELECTRICAL CHARACTERISTICS @ 25 C PART NUMBER (Note 2) M5KP5.0A M5KP6.0A M5KP6.5A M5KP7.0A M5KP7.5A M5KP8.0A M5KP8.5A M5KP9.0A M5KP10A M5KP11A M5KP12A M5KP13A M5KP14A M5KP15A M5KP16A M5KP17A M5KP18A M5KP20A M5KP22A M5KP24A M5KP26A M5KP28A M5KP30A M5KP33A M5KP36A M5KP40A M5KP43A M5KP45A M5KP48A M5KP51A M5KP54A M5KP58A M5KP60A M5KP64A M5KP70A M5KP75A M5KP78A M5KP85A M5KP90A M5KP100A M5KP110A REVERSE STANDOFF VOLTAGE V WM (Note 1) V 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 BREAKDOWN VOLTAGE V (BR) @ I (BR) V 6.40 - 7.00 6.67 - 7.37 7.22 - 7.98 7.78 - 8.60 8.33 - 9.21 8.89 - 9.83 9.44 - 10.4 10.0 - 11.1 11.1 - 12.3 12.2 - 13.5 13.3 - 14.7 14.4 - 15.9 15.6 - 17.2 16.7 - 18.5 17.8 - 19.7 18.9 - 20.9 20.0 - 22.1 22.2 - 24.5 24.4 - 26.9 26.7 - 29.5 28.9 - 31.9 31.1 - 34.4 33.3 - 36.8 36.7 - 40.6 40.0 - 44.2 44.4 - 49.1 47.8 - 52.8 50.0 - 55.3 53.3 - 58.9 56.7 - 62.7 60.0 - 66.3 64.4 - 71.2 66.7 - 73.7 71.1 - 78.6 77.8 - 86.0 83.3 - 92.1 86.7 - 95.8 94.4 - 104.0 100 - 111 111 - 123 122 - 135 mA 50 50 50 50 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 MAXIMUM CLAMPING VOLTAGE V C @ I PP MAXIMUM STANDBY CURRENT I D @ V WM MAXIMUM PEAK PULSE CURRENT I PP (FIG. 2) MAXIMUM TEMPERATURE COEFFICIENT OF V (BR) V(BR) V 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.5 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113 121 126 137 146 162 177 A 2000* 5000 2000 1000 250 150 50 20 15 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 A 543 485 447 417 388 367 347 325 294 274 251 232 215 206 192 181 172 154 141 128 119 110 103 94 86 78 72 69 65 61 57 53 52 49 44 41 40 36 34 31 28 mV/ C 4.0 4.0 4.0 5.0 6.0 6.0 7.0 8.0 9.0 10 11 12 13 15 16 18 19 22 24 27 29 30 35 38 40 45 49 51 55 60 64 69 70 75 84 90 94 102 109 122 132 NOTES: 1. Transient voltage suppressors are normally selected with reverse "stand-off voltage" (VWM) which should be equal to or greater than the dc or continuous peak operating voltage level. 2. For the bidirectional M5KP5.0CA double the ID maximum standby current to 4000 A . RF01010, Rev. B (9/13/13) (c)2013 Microsemi Corporation Page 4 of 7 M5KP5.0A - M5KP110CA(e3) Ppp - Peak Pulse Power (kW) GRAPHS t d - Pulse Width (sec.) Pulse Current in Percent of IPP FIGURE 1 Peak Pulse Power Rating Curve t - Time - ms Test waveform parameters: tr=10 s, tp=1000 s FIGURE 2 Pulse Waveform for 10/1000 s Exponential Surge RF01010, Rev. B (9/13/13) (c)2013 Microsemi Corporation Page 5 of 7 M5KP5.0A - M5KP110CA(e3) C, Capacitance (pf) GRAPHS (continued) V (BR) - Reverse Breakdown Voltage (V) FIGURE 3 Typical Junction Capacitance RF01010, Rev. B (9/13/13) (c)2013 Microsemi Corporation Page 6 of 7 M5KP5.0A - M5KP110CA(e3) PACKAGE DIMENSIONS Dim LL BL BD LD RF01010, Rev. B (9/13/13) (c)2013 Microsemi Corporation Dimensions Inch Millimeters Min Max Min Max 0.750 19.05 0.365 0.385 9.27 9.78 0.235 0.255 5.97 6.48 0.047 0.053 1.194 1.346 Page 7 of 7