MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS SRM Downsized, 5mm height, 85 SRM Series Downsized from current standard SRE series height Endurance : 1,000 hours at 85 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Downsized 5mm SRE SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -40 to +85 4 to 50Vdc (at 20, 120Hz) 20% (M) I=0.01CV or 3A, whichever is greater. (at 20 after 2 minutes) Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V 0.40 0.38 0.30 0.23 0.17 0.15 0.13 (at 20, 120Hz) tan(Max.) 4V 6.3V 10V 16V 25V 35V 50V Rated voltage (Vdc) 7 4 3 2 2 2 2 Z(-25)/Z(+20) 15 8 8 6 4 3 3 (at 120Hz) Z(-40)/Z(+20) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 1,000 hours at 85. 20% of the initial value Capacitance change D.F. (tan) 200% of the initial specified value The initial specified value Leakage current The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. 20% of the initial value Capacitance change D.F. (tan) 200% of the initial specified value Leakage current The initial specified value D 8 5 6.3 4 d 0.45 0.45 0.45 0.45 F 1.5 2.0 2.5 2.5 D' D+0.5max. L' L+1.0max. D' d Terminal Code : E Sleeve (PET : Black)* F0.5 DIMENSIONS [mm] L' 15min. 4min. *8 : Coating case (4 to 8) Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E S RM A A A E A A A A A M A A A N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0F:1R0, 100F:101) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3,35V:350,50V:500) Series code Category Please refer to "Product code guide (radial lead type)" STANDARD RATINGS WV (Vdc) 4 6.3 10 16 25 Cap (F) 100 220 22 47 330 33 100 220 10 22 33 47 4.7 10 Case size DxL(mm) 5x5 6.3x5 4x5 4x5 8x5 4x5 6.3x5 8x5 4x5 4x5 5x5 5x5 4x5 4x5 tan Rated ripple current (mArms/ 85,120Hz) Part No. 0.40 0.40 0.38 0.38 0.38 0.30 0.30 0.30 0.23 0.23 0.23 0.23 0.17 0.17 55 88 22 40 141 36 78 148 18 33 47 55 13 25 ESRM4R0E101ME05D ESRM4R0E221MF05D ESRM6R3E220MD05D ESRM6R3E470MD05D ESRM6R3E331MH05G ESRM100E330MD05D ESRM100E101MF05D ESRM100E221MH05G ESRM160E100MD05D ESRM160E220MD05D ESRM160E330ME05D ESRM160E470ME05D ESRM250E4R7MD05D ESRM250E100MD05D WV (Vdc) 25 35 50 Cap (F) 22 47 100 3.3 33 47 1.0 2.2 3.3 4.7 10 22 33 Case size DxL(mm) tan Rated ripple current (mArms/ 85,120Hz) Part No. 5x5 6.3x5 8x5 4x5 6.3x5 8x5 4x5 4x5 4x5 4x5 5x5 6.3x5 8x5 0.17 0.17 0.17 0.15 0.15 0.15 0.13 0.13 0.13 0.13 0.13 0.13 0.13 41 63 116 12 56 85 7.2 10 14 19 31 49 76 ESRM250E220ME05D ESRM250E470MF05D ESRM250E101MH05G ESRM350E3R3MD05D ESRM350E330MF05D ESRM350E470MH05G ESRM500E1R0MD05D ESRM500E2R2MD05D ESRM500E3R3MD05D ESRM500E4R7MD05D ESRM500E100ME05D ESRM500E220MF05D ESRM500E330MH05G : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. (1/1) CAT. No. E1001M