885010 2442 MHz BAW Filter Applications WiFi/Bluetooth/ISM notch filter to enable coexistence between WiMAX/LTE/TD-LTE & WiFi/BT/ISM radios Applicable passbands: 2.6 GHz WiMAX/LTE, 2.3 GHz WiMAX/LTE, LTE Bands 7 & 38, TD-LTE Band 40, WCS, WiBro, Indian 2.3GHz 4G band Handsets Portable Hotspots Mobile Routers Smart Meters 1.7 x 1.3 x 0.46 mm Product Features Functional Block Diagram Top view Rejects entire 2.4 GHz WiFi/BT/ISM bands Low Loss in 2502-2690 MHz bands: WiMAX/LTE/TD-LTE/Bands 7 & 38 Low Loss in 2300-2360 MHz bands: WiMAX/WCS/WiBro/Band 40/Indian 4G band Industry-leading small size: 1.7 x 1.3 x .46 mm Power Handling: +28 dBm (ave), +37.5 dBm (peak) Performance -30 to +85 C Ceramic chip-scale Package (CSP) Hermetic RoHS compliant, Pb-free General Description 9 5 10 1 6 7 8 3 2 4 Pin Configuration 885010 is a high-performance Bulk Acoustic Wave (BAW) notch filter designed to reject emissions in the WiFi, Bluetooth, and ISM bands, while passing both the 2.3GHz & 2.6GHz WiMAX/LTE/TD-LTE bands. 885010 is specifically designed to enable coexistence of WiFi/BT/ISM and 4G signals within the same device or in close proximity to one another. It is specified to support WiMAX requirements in the entire 2496-2690 MHz band & LTE Bands 7 & 38. The filter also passes the 2.3GHz band: WiBro, WCS, Band 40 & the Indian 4G band. The 885010 uses advanced and inexpensive packaging techniques to achieve an industry-leading 1.7 x 1.3 x .46 mm package. The filter exhibits excellent power handling capabilities. Pin # Description 9 Input 6 Output 7 AUX1 8 N/C 1,2,3,4,5,10 Ground* *Note, see application section for details on optimal grounding Ordering Information Part No. Description 885010 885010-EVB packaged part evaluation board Standard T/R size = 10,000 units/reel. 885010 is referenced on multiple designs with the leading WiMAX chipset makers. Data Sheet: Rev G 3/17/11 (c) 2011TriQuint Semiconductor, Inc. - 1 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 885010 2442 MHz BAW Filter Specifications Electrical Specifications (1) Specified Temperature Range: (2) +25 C Parameter Center Frequency Maximum Insertion Loss Absolute Attenuation (4) Amplitude Variation Conditions Min Typical (3) Max 14 17 14 - 2442 2.8 5.0 3.5 1.8 1.5 20 20 20 2.5 3.5 3.0 2.5 4.0 Min Typical (3) Max 10 11 10 6 - 3.8 (@+85 C) 7.0 (@+85 C) 5.0 (@-30 C) 4.5 4.0 3.5 1.5 1.5 1.5 - 2305 - 2360 MHz 2360 - 2380 MHz 2496 - 2502 MHz 2502 - 2520 MHz 2520 - 2690 MHz 2401 - 2403 MHz 2403 - 2481 MHz 2481 - 2483 MHz 2496 - 2506 MHz Units MHz dB dB dB dB dB dB dB dB dB p-p Specified Temperature Range: (2) -30 to +85 C Parameter Conditions Maximum Insertion Loss 2305 - 2360 MHz 2360 - 2380 MHz 2496 - 2502 MHz 2502 - 2520 MHz 2520 - 2690 MHz 2401 - 2403 MHz 2403 - 2481 MHz 2481 - 2483 MHz 2401 - 2403 MHz 2403 - 2481 MHz 2481 - 2483 MHz 2510 - 2520 MHz Absolute Attenuation (4) Amplitude Variation Input/output Return Loss Source Impedance (single-ended) (5) Load Impedance (single-ended) (5) 2.3 (@-30 C) 1.8 12 (@-30 C) 20 12 (@+85 C) 0.4 0.6 1.0 12 50 50 Units dB dB dB dB dB dB dB dB dB p-p dB p-p dB p-p dB Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Typical values are based on average measurements at room temperature, unless otherwise noted 4. Relative to zero dB 5. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter (6) Rating Operating Temperature Storage Temperature Input Power, operating (7) (In band, CW signal) (equivalent to OFDM Pav) Input Power, instantaneous peak (7) (In band, CW signal) (OFDM Pmax) -30 to +85 oC -40 to +85 oC +28 dBm +37.5 dBm 6. Operation of this device outside the parameter ranges given above may cause permanent damage. 7. Power handling capability supports WiMAX/OFDM applications Data Sheet: Rev G 3/17/11 (c) 2011TriQuint Semiconductor, Inc. - 2 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 885010 2442 MHz BAW Filter Reference Design - 50 SE Input, 50 SE Output Schematic (top view) Pin Functions 1 2,3 4 5 6 7 8 9 10 Input Ret Gnd - connect to 10 Ground - N/C Output Ret Gnd - connect to 5 Ground - connect to 10 Output Output 2 (AUX) N/C Input Ground Notes: 1. Actual matching values may vary due to PCB layout and parasitics 2. Ground paths are optimized for max attn in WLAN band PC Board PCB routing detail Notes: 1. Top, middle & bottom layers: 1 oz copper 2. Substrates: FR4 dielectric, .031" thick 3. Finish plating: Nickel: 3-8m thick, Gold: .03-.2m thick 4. Hole plating: Copper min .0008m thick Notes: 1. Grey indicates metalized area 2. This footprint represents a recommendation only 3. For solder pad recommendation see mechanical information Bill of Material Reference Desg. Value Description Manufacturer L1 L2 PCB 4.3 nH 3.9 nH N/A Coil Wire-wound, 0402, +/- 0.2nH Coil Wire-wound, 0402, +/- 0.2nH 3-layer MuRata MuRata multiple Data Sheet: Rev G 3/17/11 (c) 2011TriQuint Semiconductor, Inc. - 3 of 6 - Part Number LQW15AN4N3C00 LQW15AN3N9C00 960858a Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 885010 2442 MHz BAW Filter Typical Performance (at room temperature) Data Sheet: Rev G 3/17/11 (c) 2011TriQuint Semiconductor, Inc. - 4 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 885010 2442 MHz BAW Filter Mechanical Information Package Information, Dimensions and Marking Package Style: CSP-1713 Dimensions: 1.70 x 1.30 x 0.46 mm 0.46 NOM. 0.50 MAX. Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2-6m Ni plating 1.70 1.54 0.24 All dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm 0.235 0.20 1.30 1.15 0.24 0.55 0.205 0.45 Marking PCB Footprint MFG site Marking code 1.63 0.15 15 M 0.325 WWY 1.24 0.29 0.15 ID dot 0.64 Date code 0.295 0.54 The date code consists of: WW = 2 digit week, Y = last digit of year, M = manufacturing site code Tape and Reel Information Standard T/R size = 10,000 units/reel. All dimensions are in millimeters 2.7 SECTION A-A 8.8 O330 ID dot 5 MAX. TYP. 1.47 SECTION B-B A A 4.0 0.250 1.5 B 1.75 O102 O20.2 O13.0 Direction of travel 3.50 2.0 0.63 Data Sheet: Rev G 3/17/11 (c) 2011TriQuint Semiconductor, Inc. 8.0 1.88 - 5 of 6 - 0.60 4.0 2.0 B Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 885010 2442 MHz BAW Filter Product Compliance Information ESD Information Solderability Compatible with the latest version of J-STD-020, lead free solder, 260C Refer to Soldering Profile for recommended guidelines. ESD Rating: 3A Value: Passes 6000 V min. Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114 This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). ESD Rating: C Value: Passes 400 V min. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 This product also has the following attributes: Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free MSL Rating Devices are hermetic, therefore MSL is not applicable. Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info-sales@tqs.com Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: flapplication.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Data Sheet: Rev G 3/17/11 (c) 2011TriQuint Semiconductor, Inc. - 6 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R)