885010-EVB - TriQuint - Datasheet.Directory

885010

2442 MHz BAW Filter

Data Sheet: Rev G 3/17/11

- 1 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Applications

WiFi/Bluetooth/ISM notch filter to enable coexistence

between WiMAX/LTE/TD-LTE & WiFi/BT/ISM

radios

Applicable passbands: 2.6 GHz WiMAX/LTE, 2.3

GHz WiMAX/LTE, LTE Bands 7 & 38, TD-LTE

Band 40, WCS, WiBro, Indian 2.3GHz 4G band

Handsets

Portable Hotspots

Mobile Routers

Smart Meters

1.7 x 1.3 x 0.46 mm

Product Features

Functional Block Diagram

Top view

Rejects entire 2.4 GHz WiFi/BT/ISM bands

Low Loss in 2502-2690 MHz bands:

WiMAX/LTE/TD-LTE/Bands 7 & 38

Low Loss in 2300-2360 MHz bands:

WiMAX/WCS/WiBro/Band 40/Indian 4G band

Industry-leading small size: 1.7 x 1.3 x .46 mm

Power Handling: +28 dBm (ave), +37.5 dBm (peak)

Performance -30 to +85 ºC

Ceramic chip-scale Package (CSP)

Hermetic RoHS compliant, Pb-free

6

7

8

9

5

10

3

2

14

General Description

Pin Configuration

885010 is a high-performance Bulk Acoustic Wave

(BAW) notch filter designed to reject emissions in the

WiFi, Bluetooth, and ISM bands, while passing both the

2.3GHz & 2.6GHz WiMAX/LTE/TD-LTE bands.

885010 is specifically designed to enable coexistence of

WiFi/BT/ISM and 4G signals within the same device or in

close proximity to one another. It is specified to support

WiMAX requirements in the entire 2496-2690 MHz band

& LTE Bands 7 & 38. The filter also passes the 2.3GHz

band: WiBro, WCS, Band 40 & the Indian 4G band.

The 885010 uses advanced and inexpensive packaging

techniques to achieve an industry-leading 1.7 x 1.3 x .46

mm package. The filter exhibits excellent power handling

capabilities.

885010 is referenced on multiple designs with the leading

WiMAX chipset makers.

Pin #

Description

9

Input

6

Output

7

AUX1

8

N/C

1,2,3,4,5,10

Ground*

*Note, see application section for details on optimal

grounding

Ordering Information

Part No.

Description

885010

packaged part

885010-EVB

evaluation board

Standard T/R size = 10,000 units/reel.

885010

2442 MHz BAW Filter

Data Sheet: Rev G 3/17/11

- 2 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Specifications

Electrical Specifications (1)

Specified Temperature Range: (2) +25 ºC

Parameter

Conditions

Min

Typical (3)

Max

Units

Center Frequency

-

2442

-

MHz

Maximum Insertion Loss

2305 - 2360 MHz

2360 - 2380 MHz

2496 - 2502 MHz

2502 - 2520 MHz

2520 - 2690 MHz

-

2.8

5.0

3.5

1.8

1.5

3.5

-

3.0

2.5

dB

Absolute Attenuation (4)

2401 - 2403 MHz

2403 - 2481 MHz

2481 - 2483 MHz

14

17

14

20

-

dB

Amplitude Variation

2496 - 2506 MHz

-

2.5

4.0

dB p-p

Specified Temperature Range: (2) -30 to +85 ºC

Parameter

Conditions

Min

Typical (3)

Max

Units

Maximum Insertion Loss

2305 - 2360 MHz

2360 - 2380 MHz

2496 - 2502 MHz

2502 - 2520 MHz

2520 - 2690 MHz

-

3.8 (@+85 C)

7.0 (@+85 C)

5.0 (@-30 C)

2.3 (@-30 C)

1.8

4.5

-

4.0

3.5

dB

Absolute Attenuation (4)

2401 - 2403 MHz

2403 - 2481 MHz

2481 - 2483 MHz

10

11

10

12 (@-30 C)

20

12 (@+85 C)

-

dB

Amplitude Variation

2401 - 2403 MHz

2403 - 2481 MHz

2481 - 2483 MHz

-

0.4

0.6

1.0

1.5

dB p-p

Input/output Return Loss

2510 - 2520 MHz

6

12

-

dB

Source Impedance (single-ended) (5)

-

50

-

Load Impedance (single-ended) (5)

-

50

-

Notes:

1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3

2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature

3. Typical values are based on average measurements at room temperature, unless otherwise noted

4. Relative to zero dB

5. This is the optimum impedance in order to achieve the performance shown

Absolute Maximum Ratings

Parameter (6)

Rating

Operating Temperature

-30 to +85 oC

Storage Temperature

-40 to +85 oC

Input Power, operating (7) (In band, CW signal) (equivalent to OFDM Pav)

+28 dBm

Input Power, instantaneous peak (7) (In band, CW signal) (OFDM Pmax)

+37.5 dBm

6. Operation of this device outside the parameter ranges given above may cause permanent damage.

7. Power handling capability supports WiMAX/OFDM applications

885010

2442 MHz BAW Filter

Data Sheet: Rev G 3/17/11

- 3 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Reference Design – 50 SE Input, 50 SE Output

Schematic (top view)

Pin Functions

Notes:

1. Actual matching values may vary due to PCB layout and parasitics

1

Input Ret Gnd – connect to 10

2,3

Ground – N/C

4

Output Ret Gnd – connect to 5

5

Ground – connect to 10

6

Output

7

Output 2 (AUX)

8

N/C

9

Input

10

Ground

2. Ground paths are optimized for max attn in WLAN band

PC Board

PCB routing detail

Notes:

1. Top, middle & bottom layers: 1 oz copper

2. Substrates: FR4 dielectric, .031” thick

3. Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick

4. Hole plating: Copper min .0008µm thick

Notes:

1. Grey indicates metalized area

2. This footprint represents a recommendation only

3. For solder pad recommendation see mechanical information

Bill of Material

Reference Desg.

Value

Description

Manufacturer

Part Number

L1

4.3 nH

Coil Wire-wound, 0402, +/- 0.2nH

MuRata

LQW15AN4N3C00

L2

3.9 nH

Coil Wire-wound, 0402, +/- 0.2nH

MuRata

LQW15AN3N9C00

PCB

N/A

3-layer

multiple

960858a

885010

2442 MHz BAW Filter

Data Sheet: Rev G 3/17/11

- 4 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Typical Performance (at room temperature)

885010

2442 MHz BAW Filter

Data Sheet: Rev G 3/17/11

- 5 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Mechanical Information

Package Information, Dimensions and Marking

0.46 NOM.

0.50 MAX.

0.24

1.54

1.70

0.55 0.205

0.45

0.20

1.151.30

0.235

0.24

Package Style: CSP-1713

Dimensions: 1.70 x 1.30 x 0.46 mm

Body: Al2O3 ceramic

Lid: Kovar, Ni plated

Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni

plating

All dimensions shown are nominal in millimeters

All tolerances are ±0.15mm except overall length and width

±0.10mm

Marking

code

Marking

Date code

M

15

ID dot

WWY

MFG site

The date code consists of: WW = 2 digit week,

Y = last digit of year, M = manufacturing site code

PCB Footprint

0.15

1.63

0.295

0.54

0.64

0.325

1.24

0.15

0.29

Tape and Reel Information

Standard T/R size = 10,000 units/reel. All dimensions are in millimeters

AA

B

1.75

4.0

4.0 2.0

8.0

3.50

0.60

1.5

SECTION A-A

SECTION B-B

0.63

0.250

5° MAX. TYP.

1.47

1.88

8.8 ID dot

2.0 Direction of travel

Ø330

Ø20.2

Ø13.0

Ø102

2.7

885010

2442 MHz BAW Filter

Data Sheet: Rev G 3/17/11

- 6 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Product Compliance Information

ESD Information

ESD Rating: 3A

Value: Passes 6000 V min.

Test: Human Body Model (HBM)

Standard: JEDEC Standard JESD22-A114

ESD Rating: C

Value: Passes 400 V min.

Test: Machine Model (MM)

Standard: JEDEC Standard JESD22-A115

Solderability

Compatible with the latest version of J-STD-020, lead

free solder, 260°C

Refer to Soldering Profile for recommended guidelines.

This part is compliant with EU 2002/95/EC RoHS

directive (Restrictions on the Use of Certain Hazardous

Substances in Electrical and Electronic Equipment).

This product also has the following attributes:

Halogen Free (Chlorine, Bromine)

Antimony Free

TBBP-A (C15H12Br402) Free

PFOS Free

SVHC Free

MSL Rating

Devices are hermetic, therefore MSL is not applicable.

Contact Information

For the latest specifications, additional product information, worldwide sales and distribution locations, and information about

TriQuint:

Web: www.triquint.com Tel: +1.407.886.8860

Email: info-sales@tqs.com Fax: +1.407.886.7061

For technical questions and application information:

Email: flapplication.engineering@tqs.com

Important Notice

The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain

herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint

assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained

herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with

the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest

relevant information before placing orders for TriQuint products. The information contained herein or any use of such

information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property

rights, whether with regard to such information itself or anything described by such information.

TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining

applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.