HMC595A / 595AE v01.0515 SWITCHES - SPDT T/R - SMT GaAs MMIC 3 WATT T/R SWITCH DC - 3 GHz Typical Applications Features The HMC595A / 595AE is ideal for: Low Insertion Loss: 0.3 dB * Cellular/3G Infrastructure High Input IP3: +63 dBm * Private Mobile Radio Handsets Isolation: 30 dB * WLAN, WiMAX & WiBro Positive Control: 0/+3V to 0/+10V * Automotive Telematics Ultra Small Package: SOT26 * Test Equipment Functional Diagram General Description The HMC595A & HMC595AE are low-cost SPDT switches in 6-lead SOT26 packages for use in transmit/ receive applications which require very low distortion at high incident power levels. The device can control signals from DC to 3 GHz and is especially suited for Cellular/3G infrastructure, WiMAX and WiBro applications with only 0.3 dB typical insertion loss. The design provides a 3 watt power handling and +63 dBm third order intercept at +8 Volt bias. RF1 and RF2 are reflective shorts when "Off". Control inputs A & B are compatible with CMOS and some TTL logic families. These products are form, fit and function replacements for HMC595 & HMC595E while offering superior electrical performance. Electrical Specifications, TA = +25 C, Vctl = 0/+5 Vdc (Unless Otherwise Stated), 50 Ohm System Parameter Frequency Insertion Loss DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 3.0 GHz Isolation DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 3.0 GHz Return Loss DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 3.0 GHz Input Power for 1dB Compression Vctl = 0/+3V Vctl = 0/+5V Vctl = 0/+8V 0.5 - 3.0 GHz Input Third Order Intercept (Two-tone Input Power = +23 dBm Each Tone) Vctl = 0/+3V Vctl = 0/+5V Vctl = 0/+8V 0.5 - 3.0 GHz Switching Characteristics 26 22 18 14 29 35 37 Typ. Max. Units 0.25 0.3 0.4 0.5 0.5 0.6 0.7 0.8 dB dB dB dB 30 26 24 18 dB dB dB dB 30 25 22 20 dB dB dB dB 31 37 39 dBm dBm dBm 50 64 63 dBm dBm dBm 50 100 ns ns DC - 3.0 GHz tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 1 Min. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC595A / 595AE v01.0515 GaAs MMIC 3 WATT T/R SWITCH DC - 3 GHz 0 -0.5 -10 -1 -1.5 -20 -30 -2 -40 0 1 2 3 4 0 1 2 FREQUENCY (GHz) +25C +85C -40C +25C 4 +85C -40C Return Loss 0 0 -10 -10 RETURN LOSS (dB) ISOLATION (dB) RF1 to RF2 Isolations -20 -30 -20 -30 -40 -40 -50 -50 0 1 2 3 0 4 1 2 3 4 FREQUENCY (GHz) FREQUENCY (GHz) RF1 ON +25C RF2 ON Input P0.1dB vs. Vctl +85C -40C Input P1dB vs. Vctl 42 42 40 40 38 38 INPUT P1dB (dBm) INPUT P0.1dB (dBm) 3 FREQUENCY (GHz) SWITCHES - SPDT T/R - SMT Isolation Between RFC and RF1/RF2 0 ISOLATION (dB) INSERTION LOSS (dB) Insertion Loss 36 34 32 30 36 34 32 30 28 28 26 26 0 1 2 3 4 0 1 +8V +5V 2 3 4 FREQUENCY (GHz) FREQUENCY (GHz) +3V +8V +5V +3V Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC595A / 595AE v01.0515 GaAs MMIC 3 WATT T/R SWITCH DC - 3 GHz 75 70 70 INPUT IP3 (dBm) INPUT IP3 (dBm) Input IP3 vs. Input Power @ 1900 MHz 75 65 60 55 65 60 55 50 50 45 45 27 28 29 30 31 32 33 27 TWO TONE INPUT POWER (dBm) (EACH TONE) +10V +8V 28 +5V 30 +10V 31 32 33 +8V +5V 2nd & 3rd Harmonics @ 900 MHz Vctl = +3 Volts Input Third Order Intercept Point 70 0 0 INSERTION LOSS (dB) INPUT IP3 (dBm) 65 60 55 50 45 40 35 0 1 2 3 -0.2 -20 -0.4 -40 -0.6 -60 -0.8 -80 24 -0.4 -40 -0.6 -60 -0.8 -80 -100 -1 36 38 INSERTION LOSS (dB) INSERTION LOSS (dB) 36 F3 0 -0.2 -20 -0.4 -40 -0.6 -60 -0.8 -80 HARMONICS (dBc) -20 -100 -1 28 30 32 INPUT POWER (dBm) F2 34 0 HARMONICS (dBc) -0.2 34 32 F2 0 32 30 2nd & 3rd Harmonics @ 900 MHz Vctl = +8 Volts 0 30 28 +5V +3V 2nd & 3rd Harmonics @ 900 MHz Vctl = +5 Volts 28 26 INPUT POWER (dBm) +10V +8V 26 -100 -1 4 FREQUENCY (GHz) 3 29 TWO TONE INPUT POWER (dBm) (EACH TONE) HARMONICS (dBc) SWITCHES - SPDT T/R - SMT Input IP3 vs. Input Power @ 900 MHz 34 36 38 40 INPUT POWER (dBm) F3 F2 F3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC595A / 595AE v01.0515 GaAs MMIC 3 WATT T/R SWITCH DC - 3 GHz 45 40 40 35 30 35 30 25 25 20 0.01 0.1 20 0.01 1 0.1 +8V +5V +3V Absolute Maximum Ratings Max. Input Power Vctl = 0/+8V 0.5 - 2.5 GHz 39 dBm Control Voltage Range (A & B) -0.2 to +12 Vdc Channel Temperature 150 C Continuous Pdiss ( T= + 85 C) (derate 9.2 mW/C above 85 C) 0.597W Thermal Resistance 109 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C ESD Sensitivity (HBM) Class 1A 1 FREQUENCY (GHz) FREQUENCY (GHz) DC Blocks are required at ports RFC, RF1 and RF2 +8V +5V +3V Control Voltages State Bias Condition Low 0 to +0.2 Vdc @ 10 A Typical High +3 Vdc @ 2A Typical to +8 Vdc @ 100 A Typical ( 0.2 Vdc) SWITCHES - SPDT T/R - SMT Input P1dB vs. Vctl 45 INPUT P1dB (dBm) INPUT P0.1dB (dBm) Input P0.1dB vs. Vctl Truth Table Control Input (Vctl) A Signal Path State B RFC to RF1 RFC to RF2 High Low Off On Low High On Off ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC595A / 595AE v01.0515 GaAs MMIC 3 WATT T/R SWITCH DC - 3 GHz SWITCHES - SPDT T/R - SMT Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND Package Information Part Number Package Body Material Lead Finish MSL Rating HMC595A Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC595AE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Package Marking [3] H595A XXXX 595AE XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX Pin Descriptions Pin Number 5 Function Description 1, 3, 5 RF2, RF1, RFC This pin is DC coupled and matched to 50 Ohm. Blocking capacitors are required. 2 GND This pin must be connected to RF/DC ground. 4 B See truth table and control voltage table. 6 A See truth table and control voltage table. Interface Schematic Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC595A / 595AE v01.0515 GaAs MMIC 3 WATT T/R SWITCH DC - 3 GHz Typical Application Circuit SWITCHES - SPDT T/R - SMT Notes: 1. Set logic gate and switch Vdd = +3V to +5V and use HCT series logic to provide a TTL driver interface. 2. Control inputs A/B can be driven directly with CMOS logic (HC) with Vdd of +3 to +8 Volts applied to the CMOS logic gates. 3. DC Blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency of operation. 4. Highest RF signal power capability is achieved with V set to +10V. The switch will operate properly (but at lower RF power capability) at bias voltages down to +3V. Evaluation Circuit Board List of Materials for Evaluation PCB EV1HMC595A Item Description J1 - J3 PCB Mount SMA RF Connector J4 - J6 DC Pin C1 - C3 330 pF capacitor, 0402 Pkg. R1, R2 1 kOhm Resistor, 0402 Pkg. U1 HMC595A / 595AE T/R Switch PCB [2] 101659 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [1] The circuit board used in the application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 Ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Analog Devices upon request. [2] Circuit Board Material: Rogers 4350 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 6