FEATURES
PCB Mounting, Low profile
Very compact size( Smaller than MHS)
High CV density
Load life of 2,000 hours at 85oC
SPECIFICATIONS
Item Characteristic
Operating Temp Range 160V-250V: -40oC to +85oC
315V-450V: -25oC to +85oC
Rated Working Voltage 10 to 450VDC
Capacitance Tolerance ±20% (M)
Leakage Current
(20oC)
I≤0.02CV or 2mA, whichever is less (at 20OC after 2 minutes)
I= Leakage current (A) C= Nominal capacitance (F) V= Rated voltage (VDC)
Dissipation Factor
Tanδ (120Hz, 20oC)
Add 0.02 per 100F for capacitance greater than 100F
160 to 250 315 to 450
Tanδ (120Hz,
20oC) 0.15 0.20
Low Temperature
Characteristics
Impedance ratio at 120 Hz
WV 160 to 250 315 to 450
Z -25OC/Z 20OC 4 8
Z -40OC/Z 20OC 12 -
Load Life After applying rated working voltage for 2000 hours at 85oC and then being stabilized +20OC, capacitors shall meet following limits.
Capacitance change Within ±20% of the initial value
Tanδ ±200% of the initial specified value
Leakage current The initial specified value
Shelf Life After storage for 1000 hours at 85 oC with no voltage applied and then being stabilized +20OC, capacitors shall meet following limits.
Capacitance change Within ±20% of the initial value
Tanδ 150% of the initial specified value
Leakage current
The initial specified value
PART NUMBERING SYSTEM
DIMENSIONS
MHX 160V 222 M 22X25
Meritek Series
Voltage
Capacitance
CODE 222 562 153 473
F 2200 5600 15000 47000
Tolerance - M= ±20%
Case size (diameter X length, in mm)
Freq (Hz)
WV (V)
50
120
500
1K
10K
100K
160 to 250 0.82 1.0 1.20 1.37 1.45 1.50
315 to 450 0.82 1.0 1.18 1.23 1.35 1.40
Temperature
Temperature ≤ 45oC 60oC 70oC 85oC
Factor 1.45 1.30 1.15 1.0
RIPPLE CURRENT COEFFICIENT
Frequency
MERITEK
Snap-In Aluminum
Electrolytic Capacitors
MHX Series
rev.7
MERITEK
Snap-In Aluminum
Electrolytic Capacitors
FHS Series
MERITEK
Snap-In Aluminum
Electrolytic Capacitors
W.V(V) 160(2C) 180(2S) 200(2D) 250(2E)
Cap (μF) φ 22 φ 25 φ 30 φ 35 φ 22 φ 25 φ 30 φ 35 φ 22 φ 25 φ 30 φ 35 φ 22 φ 25 φ 30 φ 35 φ 40
180 22x25
1.00
220 22x25
1.10
270 22x25 22x30 25x25
1.25 1.28 1.30
330 22x25 22x30 25x25 22x35 25x30
1.25 1.45 1.45 1.48 1.48
390 22x25 22x30 22x30 25x25 22x40 25x30 30x25
1.35 1.50 1.60 1.60 1.70 1.70 1.68
470 22x30 25x25 22x35 25x25 22x35 25x30 22x45 25x35 30x30
1.65 1.68 1.75 1.75 1.85 1.85 1.95 1.95 1.98
560 22x35 25x30 30x25 22x40 25x30 30x25 22x40 25x35 30x25 25x40 30x30 35x25
1.95 1.95 1.95 2.00 2.00 2.05 2.00 2.05 2.05 2.15 2.10 2.15
680 22x40 25x30 30x25 22x45 25x35 30x25 22x45 25x40 30x30 25x45 30x35 35x30
2.15 2.15 2.15 2.25 2.25 2.20 2.30 2.35 2.30 2.45 2.45 2.45
820 22x45 25x35 30x30 22x50 25x40 30x30 35x25 22x50 25x45 30x35 35x25 30x40 35x35
2.52 2.50 2.52 2.65 2.65 2.60 2.60 2.65 2.70 2.70 2.65 2.75 2.75
1000 22x50 25x40 30x35 35x25 25x45 30x35 35x30 25x50 30x40 35x30 30x5 35x40
2.80 2.80 2.82 2.82 2.95 2.95 2.95 3.02 3.02 3.00 3.30 3.30
1200 25x45 30x35 35x30 25x50 30x40 35x30 30x45 35x35 35x45
3.20 3.25 3.25 3.30 3.35 3.35 3.45 3.45 3.50
1500 30x40 35x35 30x45 35x35 30x50 35x40 35x50
3.65 3.70 3.80 3.80 3.90 3.90 4.00
1800 30x50 35x40 35x45 35x45
4.20 4.20 4.25 4.45
2200 35x45 35x50 35x50
4.75 4.90 4.95
2700 35x50
5.40
3300 40x70
4.85
W.V
(
V
)
315(2F) 350(2V) 400(2G) 450(2W)
Ca
p
(
μ
F
)
φ
22
φ
25
φ
30
φ
35
φ
22
φ
25
φ
30
φ
35
φ
22
φ
25
φ
30
φ
35
φ
22
φ
25
φ
30
φ
35
φ
40
56 22x25
0.56
68 22x30
0.62
82 22x25 22x30 25x25
0.65 0.72 0.72
100 22x25 22x30 25x25 22x35 25x30 30x25
0.70 0.80 0.80 0.83 0.83 0.83
120 22x25 22x30 25x25 22x30 25x25 22x40 25x30 30x25
0.75 0.85 0.85 1.03 1.03 1.05 1.05 1.05
150 22x30 25x25 22x35 25x25 22x35 25x30 30x25 22x45 25x35 30x30
0.95 0.95 1.00 1.00 1.10 1.10 1.10 1.12 1.10 1.12
180 22x30 25x25 22x35 25x30 30x25 22x40 25x35 30x25 25x40 30x35
1.05 1.05 1.15 1.15 1.15 1.20 1.20 1.20 1.24 1.22
220 22x35 25x30 30x25 22x40 25x35 30x30 22x45 25x40 30x30 25x50 30x40 35x30
1.18 1.18 1.20 1.30 1.30 1.30 1.35 1.33 1.35 1.40 1.40 1.38
270 22x40 25x35 30x25 22x50 25x40 30x30 25x45 30x35 35x30 30x45 35x35
1.40 1.40 1.35 1.55 1.55 1.55 1.58 1.55 1.58 1.68 1.68
330 22x45 25x40 30x30 25x45 30x35 35x30 25x50 30x40 35x30 30x50 35x40
1.55 1.55 1.60 1.70 1.70 1.70 1.76 1.76 1.75 1.90 1.90
390 25x45 30x35 25x50 30x40 35x35 30x45 35x35 35x45
1.80 1.80 1.95 1.95 1.95 2.00 2.00 2.10
470 25x50 30x40 35x30 30x45 35x35 30x50 35x40 35x50
2.05 2.05 2.05 2.30 2.30 2.32 2.32 2.40
560 30x45 35x35 30x50 35x40 35x45
2.35 2.35 2.55 2.55 2.60
680 35x40 35x45 35x50
2.50 2.80 2.90
820 35x45 35x50 40x60
3.00 3.10 4.50
1000 35x50 40x60
3.15 4.95
IR : Maxium permissible ripple current [A(rms) at 85oC,120Hz]
Case size [
φ
DxL
(
mm
)
]
MHX Series
rev.7
