Emboss Tape PB CONNECTOR Specifications ------------------- Connector for button batteries used in the compact mobile equipment such as mobile phones. Mounting cost will be reduced by using this connector in place of manual soldering. And, button batteries can be more easily disassembled after use for recycling's sake. * Applicable batteries: 614 type battery (6.8 mm x 1.4 mm height) 621 type battery (6.8 mm x 2.1 mm height) * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 100 m max. After environmental tests/ 120 m max. * Insulation resistance: 1,000 M min. * Withstanding voltage: 500 VAC/minute * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Compliant with RoHS. Standards ---------------------- * Resistant to the shock * Double contact point 0 Recognized E60389 Connector 614 type 0.8 2 0.65 6.7 Type Holder part 614 Resin hook 621 Resin hook Model No. PB-614SS13-TF PB-621SR13-TF Q'ty/reel 2,000 2,000 Material and Finish Contact: Copper alloy, nickel-undercoated, gold-plated Housing: Glass-filled LCP, UL94V-0, natural (ivory) 0.8 0.65 9 4.75 RoHS compliance *The dimension should be measured from housing bottom surface. 621 type 0.8 2.8 0.65 6.7 PB-614SS13-TF PB-621SR13-TF 1.4 0.05 9 4.75 NEGATIVE(-) 8.6 0.05 10.8 0.05 Pattern prohibition area 0.8 0.65 POSITIVE(+) *The dimension should be measured from housing bottom surface. Note: The above figure is the figure viewed from the connector mounting side. 1