Transition Connector Series 8292 Transition connectors are available in industry standard sizes of 10-60 positions. This IDC connector provides a fast, permanent, and economical termination of ribbon cable to PC boards. It can be used as either a daisy chain or end type termination connector. Pin lengths are available to suit 0.063" (1.6mm) or 0.126" (3.2mm) PC boards. Designed to accommodate the industry standard 4 row PC Board hold pattern, the connector also incorporates standoffs which enable efficient flux washing and de-gassing to take place. TECHNICAL SPECIFICATION Material: Molding - UL94VO rated glass filled grey polyester Current Rating: 1 ampere Operating Temperature: -55C to +105C Contact - Phosphor bronze Insulation Resistance: 1000 megohms Contact Plating: Pure Tin Voltage Rating: 1000V DC or AC peak Wire Gauge: 26 AWG Solid & Stranded 28 AWG Solid & Stranded To suit E 1.60 PCB 2.54 3.20 PCB 3.94 DIMENSIONS: millimeters (inches) No. of Ways A B C D 10 17.78 (0.70) 19.08 (0.75) 9 11.43 (0.45) 16 25.40 (1.00) 26.70 (1.05) 15 19.05 (0.75) 20 30.48 (1.20) 31.78 (1.25) 19 24.13 (0.95) 26 38.10 (1.50) 39.40 (1.55) 25 31.75 (1.25) 34 48.26 (1.90) 49.56 (1.95) 33 41.91 (1.65) 40 55.88 (2.20) 57.18 (2.25) 39 49.53 (1.95) 50 68.58 (2.70) 69.88 (2.75) 49 62.23 (2.45) 60 81.28 (3.20) 82.58 (3.25) 59 74.94 (2.95) 14 UL File No: E90723 CSA File No: 1255749 Transition Connector Series 8292 ORDERING CODE 00 8292 010 Connector Code Prefix Series Number Number of Contacts 010 = 10 position 016 = 16 position 020 = 20 position 026 = 26 position 034 = 34 position 040 = 40 position 050 = 50 position 060 = 60 position 001 PCB Thickness 001 = Suitable for 1.6mm PCB 002 = Suitable for 3.2mm PCB 010 Plating 010 = Pure Tin Not all versions are available, please check with AVX Customer Service for availability. 15