SINGLE-IN-LINE SOCKETS
2,54 Grid Carrier with Solder Tail
Single and Double Row
www.mill-max.com 516-922-6000
99
Series 712
0,79
0,79
1,83 DIA.
1,83 DIA.
1,35 DIA.
1,35 DIA.
0,51 DIA.
0,51 DIA.
2,62
2,62
3,81
3,81
4,39
4,39
3,15
3,15
0,38-0,64
0,38-0,64
0,25
0,25
0,46
0,46
0,79
0,79
1,83 DIA.
1,83 DIA.
1,35 DIA.
1,35 DIA.
0,51 DIA.
0,51 DIA.
2,62
2,62
3,81
3,81
4,39
4,39
3,15
3,15
0,38-0,64
0,38-0,64
0,25
0,25
0,46
0,46
Ordering Information
712-XX-1_ _-41-001000
712-XX-2_ _-41-001000
Fig. 1
Fig. 2
Specify # of pins 01-64
Specify # of pins 02-64
Single Row (0,71 OR 1,4 min. mounting holes)
Double Row (0,71 OR 1,4 min. mounting holes)
2,54
2,54
2,54
2,54
Number of Pins X 2,54
Number of Pins X 2,54
2,542,54
2,542,54
Number of Pins X 2,54 / 2Number of Pins X 2,54 / 2
5,085,08
Fig. 1
Fig. 2
SPECIFY PLATING CODE XX= 13
91 93 99 41
43
44
Sleeve (Pin)
Contact (Clip)
• Standard solder tail receptacles can be
mounted as a low profile receptacle or
by the solder tail for use in smaller
diameter holes.
• Series 712 uses MM #0255 pins.
See page 136 for details.
• Hi-Rel, 4-finger BeCu #30 contact is
rated at 3 amps. See page 218 for
details.
• Insulators are high temp. thermoplastic.
RoHS
2002/95/EC
XX=Plating Code
See Below
For Electrical,
Mechanical & Enviromental
Data, See pg. 4
For RoHS compliance
select
plating code.
0,25µm Au 5,08µm Sn/Pb 5,08µm Sn
0,76µm Au 0,76µm Au 0,76µm Au
