SMS SERIES Quick Mating SMS Series | Quick Mating Range overview SMS...RDH1/SMS...RDH3 Cable receptacle with strain relief hood SMS...PDH1/SMS...PDH3 Cable plug with strain relief hood SMS...GE3-GE4/SMS...SE3-SE4 SMS...GE33/SMS...GE43 Straight board mount SMS...GE5-SE5/SMS...GE6-SE6 SMS...GE53/SMS...GE63 Right angle board mount SMS...R1/ SMS...R3 Panel mount receptacle SMS...P1/SMS...PD3 Cable plug without strain relief hood SMS...RD3 Cable receptacle without strain relief hood 3 SMS Series | Quick Mating Contacts layout SMS 2 SMS 3 SMS 6 SMS 4 SMS 9 SMS 15 SMS 24 SMS 12 SMS 18 SMS 36 Contact identifications shown are for mating face. Contact identifications of wiring face are identical as shown on the receptacle arrangements 4 SMS Series | Quick Mating Quick Mating panel and cable connectors Description The versatile and easy to use "SMS" Quick Mating panel and cable connectors are a highly cost-effective system approach to solving the constant demand for more interconnection solutions and techniques. A full plastic solution offered in either Wire attachment or PCB mounting options to provide rapid assembly/installation without requiring additional mounting hardware. Panel receptacle connectors simply snap and lock into panel cut-outs and cable plugs quickly connect and disconnect with positive retention locks. Just push to mate then press and release to un-mate. In addition, cable plug connectors also feature pin-protection skirts, positive polarization and are offered with or without integrated strain relief hoods. Cable receptacle connectors (with integrated strain relief hoods) are available to mate with the cable plug connectors for cableto-cable solutions when needed. These multi-way connectors accept the Size 16 TRIM TRIO (1.6mm) diameter contacts and are available with 10 contact arrangements from 2 to 36 positions. Features and benefits * Available in 10 contact arrangements * Self mountable panel receptacle with positive housing retention * Cable plugs with retaining latches for positive locking * Cable plug has pin protection skirt to prevent damage of male contacts * Positive polarization keys prevent mismating * Cable plug and receptacle have integrated strain relief hood which can accept a wide range of cables * Cable plug and receptacle have discrimination cavities in between contact cavities, thus offering discrimination without contact loss. See instruction page 21. * UL recognized File Nr.: E238675 * CSA certififed File Nr.: LR44961-21 Environmental Material * * * * * * * Connector: Polyamide 6.6 * Flammability rating: UL94 V2 (Black) or UL94 V0 (White). The white version is also I3F2/I2F3 according to the NFF 16101 /16102 (Fire & fume standard for French rail market) and R23/HL3 following EN 45 545 Operating temperature: -55C to +105C Insulation resistance: 5000 M min. Test potential: 2000 VAC Durability: 500 matings and unmatings Sealing performances: IP40 Electrical performances: UL: 250V - 10A CSA: 250V - 15A Wire insulation acceptance Contact * SMS PDH1, RDH1, PD3, PDH3, RD3, RDH3 max: 3.2mm * SMS R1, P1, R3 max: 4.19mm * "SMS" Quick Mating connectors accept TRIM TRIO size 16 removable snap-lock contacts (see contact section) * Contacts to be ordered seperately. Ordering information Connector family Layout: see next page SMS 12 PDH3 Body variation: R1: (UL94 V2) Panel mount receptacle - Black R3: (UL94 V0) Panel mount receptacle - White P1: (UL94 V2) Cable plug without strain relief hood - Black PD3: (UL94 V0) Cable plug without strain relief hood - White PDH1: (UL94 V2) Cable plug with integrated strain relief hood - Black PDH3: (UL94 V0) Cable plug with integrated strain relief hood - White RD3: (UL94 V0) Cable receptacle without integrated strain relief hood - White RDH1: (UL94 V2) Cable receptacle with integrated strain relief hood - Black RDH3: (UL94 V0) Cable receptacle with integrated strain relief hood - White 5 SMS Series | Quick Mating Connectors Panel mount receptacle without discrimination cavities A J 0.75 2.3 K B 25.0 (wire acceptance: 4.19mm) 13.2 Part number Black UL94 V2 White UL94 V0 SMS2R1 SMS2R3 Nbr. of contact* A 2 11.0 SMS3R1 SMS3R3 3 16.2 SMS4R1 SMS4R3 4 21.1 B C max. 5.8 15.2 SMS6R3 6 10.9 20.3 SMS9R3 9 16.0 25.4 SMS12R1 SMS12R3 12 21.1 26.2 30.5 31.2 40.6 21.1 30.5 16.2 SMS15R3 15 SMS18R3 18 SMS24R1 SMS24R3 24 21.2 SMS36R1 SMS36R3 36 46.6 16.5 11.6 21.7 SMS6R1 SMS15R1 K 11.4 SMS9R1 SMS18R1 J 16.7 16.5 21.6 26.7 35.6 16.7 31.8 36.9 21.7 47.1 26.7 *Contacts supplied separately Cable plug without strain relief hood & without discrimination cavities (wire acceptance: 4.19mm) A B max. 32.9 25.0 Part number Black UL94 V2 A C max. SMS2P1 2 15.0 SMS3P1 3 18.6 SMS4P1 4 23.7 SMS6P1 6 22.9 SMS9P1 9 SMS12P1 12 27.9 33.0 SMS15P1 15 SMS18P1 18 SMS24P1 24 23.7 SMS36P1 36 49.1 *Contacts supplied separately Note: all dimensions are in mm 6 Nbr. of contact* 18.6 17.8 38.1 43.2 33.0 SMS Series | Quick Mating Cable receptacle without strain relief hood & with discrimination cavities Contact cavity E Discrimation cavity C B max. 25.0 D Part number Nbr. of contact* Nbr. of discrimination cavities SMS2RD3 2 0 SMS3RD3 3 0 SMS4RD3 4 0 SMS6RD3 6 2 15.0 13.4 SMS9RD3 9 4 20.0 18.5 SMS12RD3 12 6 25.1 23.6 SMS15RD3 15 8 30.2 28.7 SMS18RD3 10 SMS24RD3 18 24 35.3 33.8 SMS36RD3 36 24 25.1 23.6 White UL94 V0 B max C 9.9 15 8.4 D E 11.1 14.1 16.2 18.6 21.2 23.7 16.2 18.6 21.2 23.7 46.6 49.1 *Contacts supplied separately Cable plug without strain relief hood & with discrimination cavities Contact cavity Discrimation cavity C B max. 32.7 D Part number Nbr. of contact* Nbr. of discrimination cavities SMS2PD3 2 0 SMS3PD3 3 0 SMS4PD3 4 0 SMS6PD3 6 SMS9PD3 White UL94 V0 B max. C 14.1 16.4 8.4 2 21.5 13.4 9 4 26.7 18.5 SMS12PD3 12 6 31.7 23.6 SMS15PD3 15 8 36.7 28.7 SMS18PD3 10 SMS24PD3 18 24 41.8 33.8 SMS36PD3 36 24 31.7 23.6 15 D 18.6 23.7 18.6 23.7 49.1 *Contacts supplied separately Note: all dimensions are in mm 7 SMS Series | Quick Mating Connectors (Continued) Cable receptacle with integrated strain relief hood Cable range Discrimation cavity Contact cavity B H A C D Part number Black UL94 V2 White UL94 V0 SMS2RDH1 SMS2RDH3 SMS3RDH1 SMS4RDH1 Nbr. of Nbr. of discrimicontact* nation cavities A 2 0 31.6 SMS3RDH3 3 0 35.1 SMS4RDH3 4 0 38.2 B 9.9 C D 11.1 0.5 69.0 16.2 74.4 21.2 H Cable range (mm) 0.5-8.4 49.2 0.8-7.3 1.5-10 SMS6RDH1 SMS6RDH3 6 2 34.6 15.0 72.6 50.9 1.7-9.2 SMS9RDH1 SMS9RDH3 9 4 35.8 20.0 75.3 52.2 3.9-14.2 SMS12RDH1 SMS12RDH3 12 6 38.1 25.1 72.0 52.7 4.0-15.0 30.2 SMS15RDH1 SMS15RDH3 15 8 35.9 SMS18RDH1 SMS18RDH3 18 10 36.1 SMS24RDH1 SMS24RDH3 24 15 39.7 SMS36RDH1 SMS36RDH3 36 24 54.6 *Contacts supplied separately 81.3 35.3 25.1 16.2 Cable tie (1) 55.2 5.0-16.2 5.8-20.3 90.4 21.2 57.2 7.1-20.4 128.0 46.6 63.3 8.8-24.5 TF4D TF5D (1) Cable tie not included Cable plug with integrated strain relief hood Cable range Discrimation cavity Contact cavity H B A D C Part number Black UL94 V2 White UL94 V0 SMS2PDH1 SMS2PDH3 SMS3PDH1 SMS4PDH1 A 2 0 39.5 SMS3PDH3 3 0 43.0 SMS4PDH3 4 0 46.1 B 16.4 C D 64.8 14.1 69.0 18.6 74.4 23.7 H Cable range (mm) 57.1 0.8-7.3 1.5-10 SMS6PDH1 SMS6PDH3 6 2 42.5 21.5 72.6 58.8 1.7-9.2 SMS9PDH3 9 4 43.7 26.7 75.3 60.1 3.9-14.2 SMS12PDH1 SMS12PDH3 12 6 46.0 31.7 72.0 60.6 4.0-15.0 36.7 SMS15PRDH1 SMS15PDH3 15 8 43.8 SMS18PDH1 SMS18PDH3 18 10 44.0 SMS24PDH1 SMS24PDH3 24 15 47.6 SMS36PDH1 SMS36PDH3 36 24 62.5 Note: all dimensions are in mm (1) Cable tie not included 41.8 31.7 18.6 81.3 Cable tie (1) 0.5-8.4 SMS9PDH1 *Contacts supplied separately 8 Nbr. of Nbr. of discrimicontact* nation cavities 63.1 5.0-16.2 5.8-20.3 90.4 23.7 65.1 7.1-20.4 128.0 49.1 71.2 8.8-24.5 TF4D TF5D SMS Series | Quick Mating Accessories for standard Quick Mating connectors Pin protection shroud for panel mount receptacle 23.5 B A When pins are inserted into the panel mount receptacle half (SMS...R1) of the Quick Mating connector, an optional pin protection shroud can be installed. The shroud is mounted at the same time as the receptacle by holding the shroud against the mating side of the panel with both cutouts lined up. The receptacle is then inserted in place, trapping the shroud between the receptacle and panel. The use of the pin protection shroud reduces the allowable thickness of the panel from 2.3 to 1.6 mm max. Part number Nbr. of contact position A SMS2CSB1 2 19.8 SMS3CSB1 3 23.4 SMS4CSB1 4 28.4 SMS6CSB1 6 SMS9CSB1 9 SMS12CSB1 12 SMS15CSB1 15 SMS18CSB1 18 SMS24CSB1 24 28.4 SMS36CSB1 36 54.1 Black UL94 V2 B 18.8 23.9 29.0 34.0 23.4 39.1 44.2 34.0 Strain relief hoods Part number For SMS2H1, SMS3H1, SMS4H1 & SMS6H1 2 pieces are needed for a complete hool for SMS9H1 to SMS36H1 Separate strain relief hoods are available for all standard plugs SMS...P1. The hoods consist of identical halves that snap into position on the plug and are secured in place with the cable tie drawn tightly around the cable entry collar. The cable tie is not included (TF4D - TF5D). Two, three and four position hoods are single piece units. Black UL94 V2 Nbr. of contact position SMS2H1 2 SMS3H1 3 SMS4H1 4 SMS6H1 6 SMS9H1 9 SMS12H1 12 SMS15H1 15 SMS18H1 18 SMS24H1 24 SMS36H1 36 Discrimination pins For discrimination pins on both standard Quick Mating and Quick Mating Pin Headers cable and board mount: See accessories section. Note: all dimensions are in mm 9 SMS Series | Quick Mating Contact Selector Guide Contact supplied separately Electrical characteristics: contact resistance #16 O1.6mm Machined Stamped & Formed Available platings (contact supplied separately) < 3m J Gold flash over 2 Ni K Min 0.4 gold over 2 Ni < 6m S31 S18 Active part: Gold flash over Ni Crimp area: Nickel Active part: 0.75 gold min over 2 Ni Crimp area: 1.3 tin over Ni Other: Nickel TK6 2-5 Sn pre-plated D70 Superseded by S31 S6 Superseded by S18 Other platings on request (contact supplied separately) T T: 2m Ni mini all over + 3 to 5 m Sn all over D28 0.75 gold over Ni Packaging Due to the wide variety of applications, contact packaging is offered for small series (bulk package) and high volume production (reeled contacts): Size contacts #16 (O1.6mm) * 25 pieces loose package (Stamped & Formed contacts) 10 * 50 pieces bulk package (Machined contacts) * 1,000 pieces bulk package (Machined contacts) * 3,000 pieces reeled (Stamped & Formed contacts) * 2,000 pieces reeled (Machined contacts) SMS Series | Quick Mating Crimp Contacts Standard Version Contact size #16 O1.6 mm Wire size Part number AWG mm Male Female Max wire O Max insulator O Available plating Machined 30-28 0.05-0.08 RM28M1- RC28M1- 0.55 1.1 K, J Machined 26-24 0.13-0.2 RM24M9- RC24M9- 0.8 1.6 K, J 0.89-1.28 Insulation grip S31, S18, TK6 Type (1) (1) SM24M1SM24ML1-(2) SC24M1SC24ML1-(2) RM20M13- RC20M13- RM20M12- RC20M12- 0.35-0.5 SM20M1-(1) SM20ML1-(2) SC20M1-(1) SC20ML1-(2) 1.17-2.08 Insulation grip S31, S18, TK6 0.52-1.5 RM16M23- RC16M23- 1.8 3.2 K, J Stamped & Formed 26-24 0.13-0.25 Machined 22-20 0.32-0.52 Stamped & Formed 22-20 Machined 20-16 (1) 1.18 (1) 1.8 2.2 K, J Stamped & Formed 18-16 0.8-1.5 SM16M1SM16ML1-(2) SC16M1SC16ML1-(2) 3.0 No insulation grip S31, S18, TK6 Stamped & Formed 18-16 0.8-1.5 SM16M11-(1) SM16ML11-(2) SC16M11-(1) SC16ML11-(2) 2.0-3.0 Insulation grip S31, S18, TK6 Machined 16-14 1.5-2.5 RM14M30- RC14M30- 2.28 3.2 K, J 2.0-2.5 SM14M1-(1) SM14ML1-(2) SC14M1-(1) SC14ML1-(2) 3.2 No insulation grip S31, S18, TK6 Stamped & Formed 14 Note: all dimensions are in mm (1) contact reeled (2) loose contact Exemple: RM20M13K - Size #16, Machined, AWG20 wire. Tooling Crimp Tool Table Standard contacts Contact size Part number #16 O1.6 mm RM/RC 28M1* RM/RC 24M9* RM/RC 20M13* RM/RC 20M12* RM/RC 16M23* RM/RC 14M30* SM/SC 24ML1*(1) SM/SC 20ML1*(1) SM/SC 16ML1*(1) SM/SC 14ML1*(1) SM/SC 16ML11*(1) (1) loose contact Head* Handles* Extraction tools SHANDLES RX2025GE1 S16RCM20 S16RCM16 S16RCM14 S16SCM20 S16SCML1 S16SCML11 * endurance of SHANDLES & Head tools = 50,000 cycles 11 SMS Series | Quick Mating Notes 12 SMS Series | Board mount Quick Mating (Pitch: 5.08mm) Quick Mating PC board mount connectors Description These PC board mount connectors enable Quick Mating and preassembled TRIM TRIO contacts to be PC board mounted, using conventional solder production techniques. They will then mate and latch with the standard Quick Mating plugs. Straight board mount connectors is available in 10 insert arrangements from 2 to 36 positions. Right angled board mount Quick Mating is available in 3, 6, 12 and 18 positions. All board mount connectors are supplied fully loaded with pin or socket contacts, either in solid machined or stamped and formed contacts. Stamped and formed contact have selective tin plating on the solder tails, thus eliminating flux operations. * Test potential: 2000 VAC * Current rating for SMS PCB version: - 5 Amp for stamped and formed contacts - 7.5 Amp for machined contacts * Electrical performances for crimped versions: UL: 250V - 15A CSA: 250V - 15A * Durability: 500 matings and unmatings * Sealing performances: IP40 Features and benefits * Straight versions available in 10 contact arrangements from 2 to 36 positions * Right angled versions available in 3, 6, 12 and 18 positions. * All versions are available with: - Pin or socket contacts - Stamped and formed or solid machined contacts. * Board mount connectors have discrimination cavities in between contact cavities, unless other wise noted.See instruction page 21. * UL recognized File Nr.: E238675 * CSA certififed File Nr.: LR44961-21 Environmental * Operating temperature: -55C to +105C * Insulation resistance: 5000 M min. Material * Connector body: Glass filled thermoplast UL94 V0 * Railway version : I2 F3 according to NF F 16-101 HL2/R23 according to EN 45 545 * Contacts: High conductive copper alloy * Soldering information: compatible with wave soldering up to 245C. Not compatible with reflow soldering. Plating table * Plating for solid machined contacts: - Made for 2.4mm or 3.2mm PCB thickness (straight contacts) and for 3.2mm PCB thickness (right contacts) K9 (std) = Min. 0.4 Gold in contact area, Tin on solder tail, over Nickel J9 = Gold flash in contact area, Tin on solder tail, over Nickel T = 3 - 5 Tin all over * Plating for Stamped and formed contacts: - Made for 2.4mm PCB thickness (straight contacts) and for 3.2mm PCB thickness (right contacts) K9 = Min. 0.4 Gold in contact area, 3- 5 Tin on solder tail, over Nickel T = 3 - 5 Tin all over - Made for 3.2mm PCB thickness (straight contacts) S6 = Min. 0.75 Gold in contact area Gold flash on solder tail, over Nickel D70 = Gold flash all over TR29 = 3 - 5 Tin all over Intermateability * "SMS" Quick Mating board mount connectors with preassembled TRIM TRIO size 16 board mount contacts are intermateable only with the "SMS" Quick Mating cable plug connectors equipped with TRIM TRIO crimp type removable snap-lock contacts (see contact section). Ordering information Connector family Layout: see page 14 SMS 12 GE 3 0 K9 Body variation: GE: Solid machined contacts (2.4mm or 3.2mm, see option below) SE: Stamped and formed contacts for 2.4mm PCB RE: Stamped and formed contacts for 3.2mm PCB Design variation: 3: Straight board mount with female contact 4: Straight board mount with male contacts 5: Right angle board mount with female contacts 6: Right angle board mount with male contacts Option: -: 2.4mm for GE3, GE4 and SE variation 0: 3.2mm for GE variation 3: Railway version: I2 F3 according to NF F 16-101 and HL2/R23 a cording to EN 45 545 Plating indication 13 SMS Series | Board mount Quick Mating (Pitch: 5.08mm) Connectors Straight board mount with female contacts PCB tail length E O0.8 7.0 A 5.9 5.08 2.4 5.08 O3.5 B D Dimensions Nbr. of contact Nbr. of discrimination cavities A B C 2 0 11.0 - 19.1 3 0 16.2 4 0 21.3 14.0 6 0 19.2 9 4 24.2 12 0 15 8 18 10 24 0 21.2 36 0 46.5 16.2 29.2 D E 10.2 5.9 15.2 10.9 10.2 16.0 13.4 21.1 34.3 39.4 15.2 26.1 31.2 15.2 54.6 20.9 Contacts type Part number Standard version Solid machined contacts Stamped & formed contacts Solid machined contacts PCB thickness 2.4mm PCB tail length 3.4mm PCB thickness 3.2mm PCB tail length 4.2mm PCB thickness 2.4mm PCB tail length 3.4mm PCB thickness 3.2mm PCB tail length 4.4mm PCB thickness 2.4mm PCB tail length 3.4mm SMS2GE3* SMS2GE30* SMS2SE3* SMS2RE3* - SMS3GE3* SMS3GE30* SMS3SE3* SMS3RE3* SMS3GE33* SMS4GE3* SMS4GE30* SMS4SE3* SMS4RE3* - SMS6GE3* SMS6GE30* SMS6SE3* SMS6RE3* SMS6GE33* SMS9GE3* SMS9GE30* SMS9SE3* SMS9RE3* SMS9GE33* SMS12GE3* SMS12GE30* SMS12SE3* SMS12RE3* SMS12GE33* SMS15GE3* SMS15GE30* SMS15SE3* SMS15RE3* SMS15GE33* SMS18GE3* SMS18GE30* SMS18SE3* SMS18RE3* SMS18GE33* SMS24GE3* SMS24GE30* SMS24SE3* SMS24RE3* SMS24GE33* SMS36GE3* SMS36GE30* SMS36SE3* SMS36RE3* SMS36GE33* * for coding see page 11 Example: SMS12GE3J9 - SMS with 12 solid machined contacts, plating J9 Note: all dimensions are in mm 14 NFF certified version SMS Series | Board mount Quick Mating (Pitch: 5.08mm) Straight board mount with male contacts PCB tail length E O0.8 7.0 5.9 A 5.08 C 2.4 5.08 O3.5 7.0 D B Dimensions Nbr. of contact Nbr. of discrimination cavities A B C 2 0 11.1 - 19.1 3 0 16.2 4 0 21.3 14.0 6 0 19.2 9 4 24.2 12 0 15 8 18 10 24 0 21.2 36 0 46.5 16.2 29.2 D E 10.2 5.9 15.2 10.9 10.2 16.0 13.4 21.1 34.3 39.4 15.2 26.1 31.2 15.2 54.6 20.9 Contacts type Part number Standard version Solid machined contacts NFF certified version Stamped & formed contacts Solid machined contacts PCB thickness 2.4mm PCB tail length 3.4mm PCB thickness 3.2mm PCB tail length 4.2mm PCB thickness 2.4mm PCB tail length 3.4mm PCB thickness 3.2mm PCB tail length 4.4mm PCB thickness 2.4mm PCB tail length 3.4mm SMS2GE4* SMS2GE40* SMS2SE4* SMS2RE4* - SMS3GE4* SMS3GE40* SMS3SE4* SMS3RE4* SMS3GE43* SMS4GE4* SMS4GE40* SMS4SE4* SMS4RE4* - SMS6GE4* SMS6GE40* SMS6SE4* SMS6RE4* SMS6GE43* SMS9GE4* SMS9GE40* SMS9SE4* SMS9RE4* SMS9GE43* SMS12GE4* SMS12GE40* SMS12SE4* SMS12RE4* SMS12GE43* SMS15GE4* SMS15GE40* SMS15SE4* SMS15RE4* SMS15GE43* SMS18GE4* SMS18GE40* SMS18SE4* SMS18RE4* SMS18GE43* SMS24GE4* SMS24GE40* SMS24SE4* SMS24RE4* SMS24GE43* SMS36GE4* SMS36GE40* SMS36SE4* SMS36RE4* SMS36GE43* * for coding see page 11 Example: SMS12GE4J9 - SMS with 12 solid machined contacts, plating J9 Note: all dimensions are in mm 15 SMS Series | Board mount Quick Mating (Pitch: 5.08mm) Connectors (Continued) Right angle board mount with female contacts F 5.08 16.5 4.5 O0.8 A G 2.5 B E 3x5.08 O3.4 D Dimensions Nbr. of contact Nbr. of discrimination cavities A 3 0 16.5 19.0 6 0 12 6 18 10 B C 20.5 14.4 21.6 24.5 29.5 D E F 30.2 24.2 16.2 35.2 29.2 21.2 45.4 39.4 31.2 Contacts type Part number Standard version Solid machined contacts Stamped & formed contacts Solid machined contacts PCB thickness 3.2mm PCB tail length 4.5mm PCB thickness 3.2mm PCB tail length 4.5mm PCB thickness 3.2mm PCB tail length 4.5mm SMS3GE5* SMS3SE5* SMS3GE53* SMS6GE5* SMS6SE5* SMS6GE53* SMS12GE5* SMS12SE5* SMS12GE53* SMS18GE5* SMS18SE5* SMS18GE53* * for coding see page 11 Example: SMS12GE5J9 - SMS with 12 solid machined contacts, plating J9 Note: all dimensions are in mm 16 NFF certified version G 6.8 11.9 17.2 SMS Series | Board mount Quick Mating (Pitch: 5.08mm) Right angle board mount with male contacts F 5.08 4.5 O0.8 A G 2.5 B E 16.5 3x5.08 Dimensions D O3.4 Nbr. of contact Nbr. of discrimination cavities A 3 0 16.5 19.0 6 0 12 6 18 10 B C 20.5 14.4 21.6 24.5 29.5 D E F 30.2 24.2 16.2 35.2 29.2 21.2 45.4 39.4 31.2 G 6.8 11.9 17.2 Contacts type Part number Standard version NFF certified version Solid machined contacts Stamped & formed contacts Solid machined contacts PCB thickness 3.2mm PCB tail length 4.5mm PCB thickness 3.2mm PCB tail length 4.5mm PCB thickness 3.2mm PCB tail length 4.5mm SMS3GE6* SMS3SE6* SMS3GE63* SMS6GE6* SMS6SE6* SMS6GE63* SMS12GE6* SMS12SE6* SMS12GE63* SMS18GE6* SMS18SE6* SMS18GE63* * for coding see page 11 Example: SMS12GE6J9 - SMS with 12 solid machined contacts, plating J9 Note: all dimensions are in mm 17 SMS Series | Board mount Quick Mating (Pitch: 5.08mm) Drilling Pattern Dimensions Straight angle board mount 4 contacts 10.2 9 contacts 19.0 14.0 19.0 6 contacts 24.1 3 contacts 14.0 2 contacts 15.2 10.2 10.2 12 contacts 15 contacts 18 contacts 24 contacts 36 contacts O3.5 5.08 54.7 39.4 39.4 34.3 29.2 O1.2 10.2 10.2 10.2 15.3 5.08 15.3 Right angle board mount 3 contacts 6 contacts 12 contacts 18 contacts 34.9 5.08 29.2 24.1 24.1 O3.5 O0.12 5.08 Note: all dimensions are in mm 18 Secure connector with screws (not supplied), recommended torque 0.3 N.m SMS Series | Quick Mating Pin Header Quick Mating PC board mount Pin Headers and plugs Description Quick Mating Pin Header, available in 3, 4, 6, 9 and 10 positions, provides the additional versatility of straight and right angle board mounting. Offered as an alternative to stacked connectors, the in-line contact design of the pin header provides the user with significant PC board space savings. The board mount receptacle features positive polarization and a moulded on pin protection skirt and is supplied preassembled with straight or right angled: * Solid machined or stamped and formed PC board pin contacts. * Coax PC board pin contacts. The socket cable plug features positive quick connect / disconnect latches and is designed to accept N 16 TRIM TRIO 1.6mm diameter socket contacts for maximum contact protection. Features and benefits * Available in 3, 4, 6, 9 and 10 positions. * In-line contact design, offering significant PC board space savings. * Board mount connectors available in straight and right angled version preassembled with: - Solid machined or stamped and formed pin contacts. - Coax pin contacts. * UL recognized File Nr.: E238675 * CSA metter certififed File Nr.: LR44961-21 Environmental J = Gold flash over 2 Ni T = 3 - 5 Tin all over * Plating for Stamped and formed contacts: D28 = Min. 0.75 Au over nickel. D70 = Active part: Gold flash over Ni Crimp area: Ni TR29 = 3 - 5 Tin all over * Plating for coax contacts: Z17 = Min. 0.75 Au in contact area, Flash on solder tail (inner) Min 0.75 Au in contact area, Tin on solder tail (outer) * * * * Operating temperature: -55C to +125C Insulation resistance: 5000 M min. Test potential: 2000 VAC Current rating: - 5 Amp for stamped and formed contacts - 7.5 Amps for machined contacts * Durability: 500 matings and unmatings. Material * Connector body: Glass filled thermoplast UL94 V0 Color: Black * Contacts: High conductive copper alloy Intermateability * "SMS" Socket plugs accept TRIM TRIO size 16 removable snap-lock contacts (see contact section) * Contacts to be ordered seperately. Plating table * Plating for solid machined contacts: No digit (std) = Min. 0.4 Gold all over, over Nickel. Ordering information Connector family Layout: see page 14 SMS 12 PH 3 0 TR29 Body variation: PH: Pin header board mount CH: Coax header board mount P3: Socket cable plug for pin and coax header board mount Design variation: 2: Straight coax header board mount with male contacts 3: Right angle pin header board mount with stamped male contacts 4: Straight pin header board mount with stamped male contacts GE6: Right angle pin header board mount with machined male contacts GE4: Straight pin header board mount with machined male contacts Plating indication 19 SMS Series | Quick Mating Pin Header Connectors (Continued) Right angle pin header board mount with male contacts O3.5 5.08 O3.5 O08 B C 9.4 4.2 Part number 22.9 Solid machined contacts Stamped & formed contacts Nbr. of contact A B C SMS3PH3* SMS3PHGE6 3 31.2 25.4 19.3 SMS4PH3* SMS4PHGE6 4 36.3 30.4 24.4 SMS6PH3* SMS6PHGE6 6 46.5 40.6 34.5 SMS9PH3* SMS9PHGE6 9 61.7 55.9 49.8 SMS10PH3* SMS10PHGE6 10 66.8 61.0 54.9 * for coding see page 17 Example: SMS9PH3J9 - SMS with 9 solid machined contacts, plating J9 Straight pin header board mount with male contacts 4.0 O3.5 B 9.4 Part number 22.9 Solid machined contacts Stamped & formed contacts Nbr. of contact A B C SMS3PH4* SMS3PHGE4 3 31.2 25.4 19.3 SMS4PH4* SMS4PHGE4 4 36.3 30.4 24.4 SMS6PH4* SMS6PHGE4 6 46.5 40.6 34.5 SMS9PH4* SMS9PHGE4 9 61.7 55.9 49.8 SMS10PH4* SMS10PHGE4 10 66.8 61.0 54.9 * for coding see page 17 Example: SMS9PH4J9 - SMS with 9 solid machined contacts, plating J9 Note: all dimensions are in mm 20 C A O0.8 5.08 O3.5 SMS Series | Quick Mating Pin Header Straight coax header board mount with male contacts 4.2 O3.5 9.4 O1.0 B C A O0.8 5.08 O3.5 5.0 22.9 Part number Nbr. of contact A B C SMS3CH2Z17 3 31.2 25.4 19.3 SMS4CH2Z17 4 36.3 30.4 24.4 SMS6CH2Z17 6 46.5 40.6 34.5 SMS9CH2Z17 9 61.7 55.9 49.8 SMS10CH2Z17 10 66.8 61.0 54.9 * for coding see page 17 5.8 Socket cable plug for pin and coax board mount header A 5.9 25.0 Part number Number of contact* A SMS3P3 3 16.0 SMS4P3 4 21.1 SMS6P3 6 31.2 SMS9P3 9 46.5 SMS10P3 10 51.6 *Contacts supplied separately Note: all dimensions are in mm 21 SMS Series | Quick Mating Pin Header Drilling Pattern Dimensions Right angle Pin Header Straight Pin Header O1.2 O1.2 4.32 5.08 5.08 O3.5 7.62 7.62 F F E 2.34 5.08 Straight Coax Header 2.54 2.54 Right angle Coax Header O1.4 O1.4 E 5.08 O3.5 7.62 O3.5 7.62 F F Number of contact E F 3 10.18 25.40 4 15.24 30.48 6 25.40 40.64 9 40.64 55.88 10 45.72 60.96 Note: all dimensions are in mm 22 O3.5 Secure connector with screws (not supplied), recommended torque 0.3 N.m SMS Series | Accessories Discrimination keys for SMS connectors In applications where similar connectors are used next to each other, mismatching can be a reason for disturbances, system failure or even danger to operator. To eliminate mismatching, all SMS can be equipped with discrimination solutions, which offer unlimited possibilities for a "fool-proof" interconnection system. When one of these discrimination keys is used, the SMS will only mate with a connector which has a vacant contact or discrimination cavity at the corresponding position. This system offers boundless opportunities for all applications. The material used is polyamide 6.6. Both connectors have removable contacts: SMSPKE0 For fixe female contacts and without discrimination cavities: SMSPKE2V1 Male contact Empty cavity Female contact Discrimination key A dummy contact, which can be inserted into an empty contact cavity in any of SMS connectors. A pin, which can be inserted into a preassambled female contact in all female boardmount connectors SMS. Specially for connectors without discrimination cavities and without removable pin contact: SMSPKB2 Both connectors have discrimination cavities: SMSPKE3 Male contact Discrimination sleeve Female contact Empty cavity A tube, which can be fitted over a preassembled male contact in all industrial male boardmount connectors SMS. Discrimination pins Empty discrimination cavities A pin, which can be inserted in the discrimination cavities of the SMS Quick mating cable and boardmount connectors. The discrimination cavities are in between of the contact cavities and offer the advantage that no contact cavities are lost due to discrimination. As extraction tool, the RX2025GE1 without the "extraction tool tip" can be used. RX2025GE1 23 Your local contact Our contribution to environmental protection: This catalog is printed on PEFC certified paper Advancement of sustainable wood cultivation. www.pefc.org www.souriau-industrial.com contactindustry@souriau.com WCASMSUEEN01 (c) Copyright SOURIAU Nov 2014 - SOURIAU is a registered trademark All information in this document presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notification or public announcement. Any duplication is prohibited, unless approved in writing. Reliable People, Reliable Solutions Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Souriau: SMS24RE3S6 SMS15P1 SMS6CSB1 SMS12CSB1 SMS24CSB1 SMSPKE0 SMS15H1 SMS18SE4K9 SMS3P3 SMSPKB15PK SMS4GE3 SMS12RE4D70 SMS12RE4S6 SMS15PDH1 SMS24SE3K9 SMS2RE4S6 SMS36GE4 SMS36RE3S6 SMS3PH-4TR29 SMS6RE4D70 SMS6RE4S6 SMS9PHGE4 SMS6PDH3 SMS15GE4 SMS15SE3K9 SMS15SE4K9 SMS18GE4 SMS18GE5 SMS18SE5K9 SMS24SE4K9 SMS2GE3 SMS2GE4 SMS2SE3K9 SMS2SE4K9 SMS36GE3 SMS36SE4K9 SMS3GE3 SMS3SE3K9 SMS3SE4K9 SMS3SE5K9 SMS4SE3K9 SMS4SE4K9 SMS6SE4K9 SMS6SE5K9 SMS9GE4 SMS9SE3K9 SMS4RE-3TR29 SMS24H1 SMS12H1 SMS9H1 SMS3H1 SMS36P-1 SMS6RDH1 SMS24RE4TR29 SMS24PDH1 SMS12PDH1 SMS18H1 SMS9P1 SMS12RDH1 SMS2RDH1 SMS12SE4K9 SMS2H1 SMS3RDH1 SMS4H1 SMS2RE4TR29 SMS4RE3S6 SMS36R-3TR29 SMS9P3 SMS24R-3TR29 SMS9R-4TR29 SMS24P1 SMS6P1 SMS6H1 SMS3P1 SMS4P1 SMS2P1 SMS2R1 SMS3RE-3TR29 SMS6RE-3TR29 SMS12P1 SMS12GE5 SMS6GE3J