Hour without preselection
-
LCD 24 x 48
-
CTR24 CTR24 model with orange backlighting Part number 87622181
Display : 8-digit LCD, height 8 mm
Built-inmoduleforvoltageinputs10→260VAC/DC(2224-2324)
4 timing ranges : 99,999.99 hrs - 99,999.59 hrs - 999,999.9 s - 9,999 hrs 59 min 59 s
Powered by a lithium battery, service life 8 years
Reset on panel or external with inhibition option
Backlit model (2323-2333-2324)
Accessories for 50 x 25 mm cut-out
Part numbers
Specifications
Type
Type
Functions
87622181
CTR24 model with orange backlighting
2323
Hour counter, solid state input
PNP
Consumption
Backlighting : 24 VDC
±
20 % 50 mA
Connection by 8 screw terminals at rear of casing
Connection capacity
1,5 mm
2
Fixed using bracket
Degree of protection front face
IP 65
Temperature limits use (°C)
-
10→+60
Temperature limits stored (°C)
-
20→+70
Breakdown voltage
EN 610110
-
1 : 2000 V / 50 Hz / 1 min.
Conformity to standards
EN 61000
-6-2 -
EN 55011 class B
Altitude
2000 m
Certifications
UL
- cULus (pending) -
CE
Weight (g)
50
Function
Hour counter
Display
8-
digit LCD
Height digits (mm)
8
Time ranges
0→99999.99h
0→99999.59h
0→9999999.9s
0→9999h59min59s
Time base : Crystal controlled (Accuracy
±
100)
Start/stop input
by PNP or dry contact (terminals 2
-6)
Low level
0→0,7VDC
High level
4→30VDCPNP
Min time closed
> 100 ms
Input impedance
100 k
Ω
PNP
Start/stop input
by PNP or dry contact (terminals 2
-6)
Low level
0→0,7VDC
High level
3→30VDC
Minimum time closed
> 100 ms
Input impedance
1 M
Ω
Volt-free contact or open collector (terminals 3-6)
Minimum time closed
50 ms
One start/stop input Two voltage levels (terminals 3-6)
Voltage -
Terminals 1
-2
10→260VAC/DC
Input impedance
160 K
Ω
Minimum pulse time DC
100 ms
Minimum pulse time AC
100 ms
Low level
0→2VAC/DC
High level
10→260VAC/DC
Voltage -
Terminals 2
-3
Minimum pulse time
16 ms
Low level
0→2VAC/DC
High level
10→260VAC/DC
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
23/06/2014 www.crouzet.com
Accessories
Reset via
Inhibited : Terminals 4
-6 not connected
Active : Terminals 4-6 connected
1 lithium battery
- Life (years)
8
Description
Code
Adaptor for 50 x 25 mm cut-out - Fixed with screws
26546843
Adaptor for 50 x 25 mm cut-out - Fixed with clips
26546844
DIN rail adaptor
26546840
Clip
-fixing kit (supplied with the product)
26546848
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
23/06/2014 www.crouzet.com
N
o
Legend
Seal
Fixing yoke
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
23/06/2014 www.crouzet.com
Accessory supplied with the counter
Accessory supplied with the counter
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
23/06/2014 www.crouzet.com
Start/Stop input
Transistor PNP
N
o
Legend
NC
Start/Stop input
Reset input 100 ms
Enable panel reset
Mode 1 (Time selection)
0 V common/ (BL
- only 23xx)
Mode 2 (Time selection)
Backlighting option + 24 VDC (only 2323)
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
23/06/2014 www.crouzet.com
Start/Stop input PNP
Start/Stop input PNP
N
o
Legend
NC
Start/Stop input
Reset input 100 ms
Enable panel reset
Mode 1 (Time selection)
0 V common/ (BL
- only 23xx)
Mode 2 (Time selection)
Backlighting option + 24 VDC (only 2333)
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
23/06/2014 www.crouzet.com
Start/Stop or reset input NPN
- Transistor
Start/Stop or reset input PNP
- Transistor
Start/Stop or reset input NPN
- Transistor
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
23/06/2014 www.crouzet.com
Start/Stop or reset input NPN
- Transistor
Start/Stop or reset input - Contact supplied with power
N
o
Legend
Start/Stop input
AC/DC common
Reset input
Enable panel reset
Mode 1 (Time selection)
0 V common/ (BL
- only 23xx)
Mode 2 (Time selection)
Backlighting option + 24 VDC (only 2324)
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
23/06/2014 www.crouzet.com
Start/Stop or reset input PNP Transistor or 3
-wire PNP proximity sensor for leakage current detector < 1 mA
Start/Stop or reset input NPN Transistor or 3
-wire NPN proximity sensor for leakage current detector < 1 mA
Start/Stop or reset input : 2-wire proximity sensor R=470 ö/2 W for 2-wireleakagecurrentdetector≤1mA
Start/Stop or reset input : 2-wire proximity sensor R=470 ö/2 W for 2-wireleakagecurrentdetector≤1mA
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
23/06/2014 www.crouzet.com
Start/Stop or reset input : 2-wire proximity sensor R=470 ö/2 W for 2-wireleakagecurrentdetector≤1mA
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
23/06/2014 www.crouzet.com
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Crouzet:
87622181