All specifications are typical at 12Vin and 3.3Vout, full load at 25°C unless otherwise stated
DC/DC CONVERTERS Non-isolated POL Converter 1
NEW Product
File Name: smt30e_12.pdf Rev (01): 22 Nov 2004
International Safety Standard Approvals (pending)
UL/cUL CAN/CSA 22.2 No. (TBD)
UL 60950 File No. (TBD)
TÜV Product Service (EN60950) Certificate No. (TBD).
CB report and certificate to IEC60950
The SMT30E series are non-isolated DC/DC converters packaged in a surface-mount footprint
giving designers a cost effective solution for conversion from a 12V source. The SMT30E has a
wide input range (8V to 14V) and offers a wide 0.8 to 3.63V output voltage range with a 30A load,
which allows for maximum design flexibility and a pathway for future upgrades. The SMT30E is
designed for applications that include distributed power, workstations, optical network and
wireless applications. Implemented using state of the art surface-mount technology and
automated manufacturing techniques, the SMT130E offers compact size and efficiencies of up to
91%.
•30A current rating
•Input voltage range: 8V to 14V
•Output voltage range: 0.8 to 3.63V
•Ultra high efficiency: 91% @ 12Vin and 3.3Vout
•Extremely low internal power dissipation
•Minimal thermal design concerns
•Designed in reliability: MTBF of TBD hours
per Telcordia SR-332
•Ideal solution where board space is at a premium
or tighter card pitch is required
•Industry standard surface-mount footprint
2 YEAR WARRANTY
SPECIFICATIONS
EMC CHARACTERISTICS
Electrostatic discharge EN61000-4-2, IEC801-2
Conducted immunity EN61000-4-6
Radiated immunity EN61000-4-3
GENERAL SPECIFICATIONS
Efficiency 91%
Insulation voltage Non-isolated
Switching frequency Fixed 1.3MHz typ.
Approvals and EN60950
standards (pending) UL/cUL60950
Material flammability UL94V-0
Dimensions (LxWxH) 33.02 x 13.46 x 8.21mm
1.3 x 0.53 x 0.323 inches
Weight 6.3g (0.22oz)
Coplanarity 100µm
MTBF Telcordia SR-332 TBD hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient, -40ºC to +85ºC
(See Note 2) temperature
Non-operating -40ºC to +125ºC
PROTECTION
Short-circuit protection Continuous
Thermal protection Automatic recovery
Preliminary Data - subject to change without notice
OUTPUT SPECIFICATIONS
Voltage adjustability 0.8V to 3.63V
Setpoint accuracy ±1.3% typ.
Line regulation ±0.2% typ.
Load regulation ±1.5% typ.
Total error band ±3.0% typ.
Minimum load 0A
Overshoot/undershoot None
Ripple and noise 5Hz to 20MHz 60mV pk-pk
25mV rms
Temperature coefficient ±0.01%/ºC
Transient response Vout = 1.5 50% to 75% load step
Slew rate = 0.5A/µs 3% max. deviation
10µs recovery to
within ±1.0%
Remote sense 10% Vo compensation
INPUT SPECIFICATIONS
Input voltage range 8V to 14VDC
Input current No load (max.) TBDmA
Input current (max.) 9.2A max. @ Io max.
and Vout = 3.3V
Input reflected ripple 220mA rms
Remote ON/OFF (See Note 1)
Start-up time 20ms
SMT30E Series
12Vin Single Output
Patent No. 6,786,736
File Name: smt30e_12.pdf Rev (01): 22 Nov 2004
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
DC/DC CONVERTERS Non-isolated POL Converter 2
NEW Product
Notes
1The SMT30E features a ‘Positive Logic’ Remote ON/OFF operation. If not
using the Remote ON/OFF pin, leave the pin open (the converter will be
on). The Remote ON/OFF pin is referenced to ground.
The following conditions apply for the SMT30E:
Configuration Converter Operation
Remote pin open circuit Unit is ON
Remote pin pulled low [Von/off < 0.8V] Unit is OFF
Remote pin pulled high [Von/off >1.6V] Unit is ON
A ‘Negative Logic’ Remote ON/OFF version is also possible with this
converter. Please consult the factory for details.
OUTPUT
INPUT OUTPUT
OUTPUT OUTPUT
EFFICIENCY REGULATION MODEL
POWER
VOLTAGE VOLTAGE
CURRENT CURRENT
(MAX.) LINE LOAD NUMBER
(MAX.) (MIN.) (MAX.)
108.9W 8.0V - 14.0V 0.8V - 3.63V 0A 30A 91% ±0.2% ±1.5% SMT30E-12W3V3
Preliminary Data - subject to change without notice
Output Voltage Adjustment of the SIL10-05Wxxx Series
SMT30E-12W3V3-T
Part Number System with Options
Product Family
SMT = Surface Mount
Rated Output Current
30 = 30Amps
Input Voltage
12 = 8V - 14V
Type of Output
W = Wide
Output Voltage
0.8V - 3.63V
The ultra-wide output voltage trim range offers major advantages to users who
select the SMT30E-12W3V3. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.8V to 3.63V. When the SMT30E-12W3V3 converter
leaves the factory the output has been adjusted to the default voltage of 0.8V
Output Voltage Adjustment of the SMT30E-12W3V3 Series
Performance
E= Enhanced Performance
Packaging Options
No Suffix = Trays
T = Tape and Reel
Notes
AThe derating curve represents the condition at which internal components
are within the Artesyn derating guidelines.
BCharacteristic data has been developed from actual products tested at
25°C. This data is considered typical data for the converter.
SMT30E Series
12Vin Single Output
File Name: smt30e_12.pdf Rev (01): 22 Nov 2004
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
DC/DC CONVERTERS Non-isolated POL Converter 3
NEW Product
OUTPUT CURRENT (A)
AMBIENT TEMPERATURE (ºC)
0m/s
1m/s
0
10
20
30
40
020406080
2m/s
OUTPUT CURRENT (A)
AMBIENT TEMPERATURE (ºC)
0m/s
1m/s
0
10
20
30
40
020406080
2m/s
Figure 1 - Derating Curve
Vin = 12V, Output Voltage = 1.0V (See Note A)
Figure 2 - Derating Curve
Vin = 12V, Output Voltage = 1.5V (See Note A)
1
6
3
4
2
5
SMT30E
Load
Vout
Remote sense +
RTRIM
Trim
Vin
Gnd
Cout 100µF
Remote
ON/OFF
Cin 47µF
Figure 6 - Standard Application
Preliminary Data - subject to change without notice
EFFICIENCY (%)
OUTPUT CURRENT (A)
0 5 10 15 20 25 30
0
20
40
60
80
100
Vou t = 1.0V
Vou t = 1.5V
Vou t = 1.8V
Vou t = 2.5V
Vou t = 3.3V
Figure 5 - Efficiency vs Load Current
Vin = 12V (See Note B)
OUTPUT CURRENT (A)
AMBIENT TEMPERATURE (ºC)
0m/s
1m/s
0
10
20
30
40
020406080
2m/s
Figure 3 - Derating Curve
Vin = 12V, Output Voltage = 1.8V (See Note A)
OUTPUT CURRENT (A)
AMBIENT TEMPERATURE (ºC)
0m/s
1m/s
0
10
20
30
40
020406080
2m/s
Figure 4 - Derating Curve
Vin = 12V, Output Voltage = 2.5V (See Note A)
SMT30E Series
12Vin Single Output
File Name: smt30e_12.pdf Rev (01): 22 Nov 2004
Please consult our website for the following items: ✔ Application Note www.artesyn.com
Datasheet © Artesyn Technologies
®
2004
The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent
accompany the sale of any such product(s) or information contained herein.
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
DC/DC CONVERTERS Non-isolated POL Converter 4
NEW Product
Preliminary Data - subject to change without notice
All dimensions in inches (mm)
All tolerance ±0.010in (±0.25mm)
unless otherwise stated
CONNECTOR (6 PL)
WIDTH : 0.112 ±0.003 [2.84±0.08]
LENGTH : 0.062 ±0.0016 [1.57±0.04]
SIDE VIEW
TOP VIEW
1.300±0.010 [33.02±0.25]
0.048 [1.22]
BOTTOM VIEW
Vout
+Vin
GND
Remote
ON/OFF
Sense
Trim
0.190 [4.83]
0.430 [10.92]
0.310 [7.87]
0.297 [7.54]
0.190 [4.83]
0.190 [4.83]
0.405 [10.29]
0.075 [1.91]
0.530±0.010
[13.46±0.25]
0.039 [1.00]
0.039 [1.00]
SEATING PLANE
0.319 [8.10]
max. INSTALLED HT.
PIN CONNECTIONS
PIN NUMBER FUNCTION
1Remote ON/OFF
2Remote Sense +
3Trim
4+Vout
5Ground
6+Vin
Figure 7 - Mechanical Drawing and Pinout Table
SMT30E Series
12Vin Single Output
