82 Compensated SPECIFICATIONS 316L SS Pressure Sensor 19mm Diameter Package 0 - 100mV Output Absolute and Gage Temperature Compensated The 82 compensated is a 19 mm small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 82 compensated can be configured for o-ring mounting or threaded process fittings and is designed for OEM applications where compatibility with corrosive media is required. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. A ceramic substrate is attached to the package that contains lasertrimmed resistors for temperature compensation and offset correction. An additional laser-trimmed resistor is included which can be used to adjust an external differential amplifier and provide span interchangeability to within 1%. Please refer to the 82 uncompensated and constant voltage datasheets for more information on different features of the 82. SENSOR SOLUTIONS ///82C 2/2016 Page 1 82 Compensated FEATURES O-Ring Mount/Threaded Process Fittings -40C to +125C Operating Temperature Range 0.2% Pressure Non Linearity 1.0% Interchangeable Span (provided by gain set resistor) Solid State Reliability APPLICATIONS Medical Instruments Process Control Fresh & Waste Water Measurements Partial Vacuum Gas Measurement Pressure Transmitters Tank Level Systems (RV & Industrial) STANDARD RANGES Range 0 to 1 0 to 5 0 to 15 0 to 30 0 to 50 0 to 100 0 to 300 0 to 500 SENSOR SOLUTIONS ///82C psia psig 2/2016 Page 2 82 Compensated PERFORMANCE SPECIFICATIONS Supply Current: 1.5mA Ambient Temperature: 25C (unless otherwise specified) 001PSI PARAMETERS MIN TYP MAX Span 50 100 Zero Pressure Output -2 0 Pressure Non Linearity -0.3 Pressure Hysteresis -0.10 Repeatability 0.02 150 TYP MAX MIN TYP MAX 50 100 150 75 100 150 0 0 2 -2 0.3 -0.2 0.10 -0.10 6.5 2.5 7.0 4.0 0.02 Input Resistance 2.5 Output Resistance 4.0 5.0 015PSI 005PSI MIN 0.02 NOTES mV 1 2 -1 +0.2 -0.1 0.10 -0.05 6.5 3.8 5.8 7.0 4.0 6.0 K 0.02 5.0 UNITS 0.02 1 mV 0.1 %Span 0.05 %Span 0.02 2 %Span K Thermal Hysteresis - Span -0.25 0.05 0.25 -0.25 0.05 0.25 -0.25 0.05 +0.25 %Span 3 Thermal Hysteresis - Offset -0.25 0.05 0.25 -0.25 0.05 0.25 -0.25 0.05 +0.25 %Span 3 Temperature Error - Span -1.0 1.0 -1.0 1.0 -0.75 0.75 %Span 3 Temperature Error - Offset -1.0 1.0 -1.0 1.0 -0.5 0.5 %Span 3, 9 Long Term Stability - Span 0.10 0.10 0.10 %Span 4 Long Term Stability - Offset 0.25 0.25 0.10 %Span 4 Supply Current 0.5 Insulation Resistance (50Vdc) 50 1.5 2.0 0.5 1.5 2.0 50 0.5 1.5 2.0 mA M 50 Output Noise (10Hz to 1KHz) 1 1 1 uV p-p Response Time (10% to 90%) 0.1 0.1 0.1 ms Pressure Overload 10x 3x 3x Rated Pressure Burst 12x 4x 4x Rated Operating Temperature Compensated Temperature Storage Temperature -20 +70 -20 +70 -40 +125 C 0 +50 0 +70 -20 +85 C -50 +125 -50 +125 -50 +125 C Media - Pressure Port Liquids and Gases compatible with 316L Stainless Steel and Buna-N Media - Reference Port Compatible with Silicon, Pyrex, Gold, Fluorosilicone RTV and 316L Stainless Steel 5 6 7 8 Notes 1. Ratiometric to supply current. 2. Best fit straight line. 3. Maximum temperature error within the compensated temperature range with respect to 25C. 4. Long term stability over a one year period with constant current and temperature. 5. Minimum resistance between case and pins. 6. 10 psi maximum for 1 psi devices. 7. Maximum temperature range for product with standard cable and connector is -20C to +105C. 8. Gage units not recommended for high vacuum applications. For high vacuum applications consult factory. 9. Temperature Error - Offset for 15psi is -0.75 to 0.75 and >15psi is -0.5 to 0.5. SENSOR SOLUTIONS ///82C 2/2016 Page 3 82 Compensated DIMENSIONS CONNECTIONS SENSOR SOLUTIONS ///82C 2/2016 Page 4 82 Compensated APPLICATION SCHEMATIC ORDERING INFORMATION 82 - 050 G - 1 C T Model - Pressure Range Pressure Type - Fitting Type Electrical Vent 82 - 001* 005 015 030 050 100 300 500 G = Gage A = Absolute - Blank = O-Ring Mount 1 = 1/4-18NPT 2 = 1/8-27 NPT 3 = 7/16-20UNF 9 = 1/4-19BSP P = Solder Pads R = Ribbon Cable C = Cable w/ Connector Blank = No Tube T = Tube *1psi only available in gage type NORTH AMERICA EUROPE ASIA Measurement Specialties, Inc., a TE Connectivity Company 45738 Northport Loop West Fremont, CA 94538 Tel: 1-800-767-1888 Fax: 1-510-498-1578 Sales: pfg.cs.amer@meas-spec.com Measurement Specialties (Europe), Ltd., a TE Connectivity Company 26 Rue des Dames 78340 Les Clayes-sous-Bois, France Tel: +33 (0) 130 79 33 00 Fax: +33 (0) 134 81 03 59 Sales: pfg.cs.emea@meas-spec.com Measurement Specialties (China), Ltd., a TE Connectivity Company No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 Sales: pfg.cs.asia@meas-spec.com TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity`s obligations shall only be as set forth in TE Connectivity`s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. (c) 2015 TE Connectivity Ltd. family of companies SENSOR SOLUTIONS ///82C All Rights Reserved. 2/2016 Page 5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 82-300G-C