CLD-DS10 Rev 12H Product family data sheet Cree(R) XLamp(R) XR-C LEDs Product Description The XLamp(R) lighting XR-C designers LED the gives FEATURES Table of contents * Available in white (2600 K to Characteristics - White, Royal Blue, Blue, 10,000 K CCT), royal blue, blue, Green.............................................................2 green, amber, redorange & red Characteristics - Amber, Red-Orange, Red..2 Maximum drive current: up to Flux Characteristics - White.........................3 700 mA Flux Characteristics - Color.........................3 Low thermal resistance: as low as Relative Spectral Power Distribution..........5 12 C/W Relative Flux vs. Junction Temperature......6 Maximum junction temperature: Electrical Characteristics.............................7 150 C Relative Flux vs. Current..............................8 Industry-leading JEDEC standard Typical Spatial Distribution..........................9 flexibility and performance to create the next generation of LED lighting products. * XLamp XR-C LEDs feature electrically neutral thermal path, low thermal * resistance and support for a wide range of drive currents. Cree * XLamp LEDs bring high * performance and quality of light to a wide range of lighting applications, * including color-changing, portable and prequalification testing Thermal Design......................................... 10 Reflow solderable - JEDEC Reflow Soldering Characteristics............. 11 JSTD020C compatible Notes......................................................... 12 personal, outdoor, indoor-directional, * Electrically neutral thermal path Mechanical Dimensions........................... 14 transportation, * Lumen maintenance of greater than Tape and Reel............................................ 15 70% after 50,000 hours Packaging.................................................. 16 commercial lighting. stage and and studio, emergency-vehicle * RoHS and REACh compliant * UL(R) recognized component www.cree.com/Xlamp (E349212) Copyright (c) 2007-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLamp (R) XR-C LED Characteristics - White, Royal Blue, Blue, Green Characteristics Unit Thermal resistance, junction to solder point Minimum Typical C/W 12 Viewing angle (FWHM) - white degrees 90 Viewing angle (FWHM) - royal blue, blue, green degrees 100 mV/C -4.0 Temperature coefficient of voltage ESD classification (HBM per Mil-Std-883D) DC forward current Maximum Class 2 mA 500 Reverse voltage V 5 Forward voltage (@ 350 mA) - white, royal blue, blue V 3.5 4.0 Forward voltage (@ 350 mA) - green V 3.7 4.0 Forward voltage (@ 500 mA) - white, royal blue, blue V 3.6 LED junction temperature* C 150 * Note: For lumen maintenance data, see the Cree XLamp LED Reliability document. Characteristics - Amber, Red-Orange, Red Characteristics Unit Thermal resistance, junction to solder point Minimum Typical C/W 15 degrees 90 Temperature coefficient of voltage - red-orange, red mV/C -2.3 Temperature coefficient of voltage - amber mV/C -1.8 Viewing angle (FWHM) ESD classification (HBM per Mil-Std-883D) Maximum Class 2 DC forward current - red-orange, red mA 700 DC forward current - amber mA 350 Reverse voltage V 5 Forward voltage (@ 350 mA) V 2.2 Forward voltage (@ 700 mA) - red-orange, red V 2.4 LED junction temperature* C 2.5 150 * Note: For lumen maintenance data, see the Cree XLamp LED Reliability document. Copyright (c) 2007-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 2 XLamp (R) XR-C LED Flux Characteristics - White (TJ = 25 C) The following tables describe the available colors and flux for XR-C LEDs by listing the correlated color temperature range for the entire family and by providing several base order codes. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XR LED Family Binning and Labeling document. Minimum Luminous Flux (lm) CCT Range Color Minimum Cool White 5,000 K Neutral White 3,700 K Warm White 2,600 K Maximum 10,000 K 5,000 K 3,700 K Order Code Group Flux (lm) N3 56.8 XRCWHT-L1-0000-00501 N4 62.0 XRCWHT-L1-0000-00601 P2 67.2 XRCWHT-L1-0000-00701 P3 73.9 XRCWHT-L1-0000-00801 P4 80.6 XRCWHT-L1-0000-00901 Q2 87.4 XRCWHT-L1-0000-00A01 N3 56.8 XRCWHT-L1-0000-005E4 N4 62.0 XRCWHT-L1-0000-006E4 P2 67.2 XRCWHT-L1-0000-007E4 P3 73.9 XRCWHT-L1-0000-008E4 P4 80.6 XRCWHT-L1-0000-009E4 M3 45.7 XRCWHT-L1-0000-003E7 N2 51.7 XRCWHT-L1-0000-004E7 N3 56.8 XRCWHT-L1-0000-005E7 N4 62.0 XRCWHT-L1-0000-006E7 P2 67.2 XRCWHT-L1-0000-007E7 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 12). * Typical CRI for Cool White & Neutral White (3,700 K - 10,000 K CCT) is 75. * Typical CRI for Warm White (2,600 K - 3,700 K CCT) is 80. Flux Characteristics - Color (TJ = 25 C) Dominant Wavelength Range Color Royal Blue Minimum Maximum Group DWL (nm) Group DWL (nm) D3 450 D5 465 Minimum Radiant Flux (mW) Order Code Group Flux (mW) 12 250 XRCROY-L1-0000-00701 13 300 XRCROY-L1-0000-00801 Copyright (c) 2007-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 3 XLamp (R) XR-C LED Flux Characteristics - Color (TJ = 25 C) - Continued Dominant Wavelength Range Color Blue Minimum Maximum Group DWL (nm) Group DWL (nm) B3 465 B4 475 Dominant Wavelength Range Minimum Color Green Maximum Group DWL (nm) Group DWL (nm) G2 520 G4 535 Dominant Wavelength Range Color Minimum Group Amber A2 DWL (nm) 585 Maximum Group A3 DWL (nm) 595 Dominant Wavelength Range Color RedOrange Minimum Maximum Group DWL (nm) Group DWL (nm) O3 610 O4 620 Dominant Wavelength Range Color Minimum Group Red R2 DWL (nm) 620 Maximum Group R3 DWL (nm) 630 Minimum Luminous Flux (lm) Order Code Group Flux (lm) G 13.9 XRCBLU-L1-0000-00G01 H 18.1 XRCBLU-L1-0000-00H01 Minimum Luminous Flux (lm) Order Code Group Flux (lm) M 39.8 XRCGRN-L1-0000-00M01 N 51.7 XRCGRN-L1-0000-00N01 Minimum Luminous Flux (lm) Order Code Group Flux (lm) J 23.5 XRCAMB-L1-0000-00J01 K2 30.6 XRCAMB-L1-0000-00K01 M2 39.8 XRCAMB-L1-0000-00M01 Minimum Luminous Flux (lm) Order Code Group Flux (lm) K2 30.6 XRCRDO-L1-0000-00K01 M2 39.8 XRCRDO-L1-0000-00M01 Minimum Luminous Flux (lm) Order Code Group Flux (lm) J 23.5 XRCRED-L1-0000-00J01 K2 30.6 XRCRED-L1-0000-00K01 M2 39.8 XRCRED-L1-0000-00M01 Note: Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements, 2 on CRI measurements and 1 nm on dominant wavelength measurements. See the Measurements section (page 12). Copyright (c) 2007-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 4 XLamp (R) XR-C LED Relative Spectral Power Distribution Relative Spectral Power Distribution White White Relative Radiant Power (%) 100 80 60 5000 K - 10000 K CCT 3700 K - 5000 K CCT 2600 K - 3700 K CCT 40 20 0 380 430 480 530 580 630 680 730 780 Wavelength (nm) Color Color Relative Radiant Power (%) 100 80 Royal Blue Blue Green Amber Red-Orange Red 60 40 20 0 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright (c) 2007-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 5 XLamp (R) XR-C LED Relative Flux vs. Junction Temperature (If = 350 mA) Relative Flux vs. Junction Temperature (IF = 350 mA) 100% 90% Relative Luminous Flux 80% 70% 60% White 50% Blue Green 40% 30% 20% 10% 0% 25 50 75 100 125 150 Junction Temperature (C) 100% 90% Relative Luminous Flux 80% 70% 60% Amber Red-Orange 50% Red 40% 30% 20% 10% 0% 25 50 75 100 125 150 Junction Temperature (C) 100% 90% Relative Radiant Flux 80% 70% 60% 50% Royal Blue 40% 30% 20% 10% 0% 25 50 75 100 125 150 Junction Temperature (C) Copyright (c) 2007-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 6 XLamp (R) XR-C LED Electrical Characteristics (Tj = 25C) White, Royal Blue, Blue & Green Electrical Characteristics (TJ = 25 C) Forward Current (mA) 500 400 300 Green 200 White, Royal Blue, Blue 100 0 Amber 0.0 1.0 2.0 3.0 4.0 5.0 Forward Voltage (V) Forward Current (mA) 400 300 Amber 200 100 0 Red-Orange, Red 0.0 1.0 2.0 3.0 4.0 5.0 Forward Voltage (V) 700 Forward Current (mA) 600 500 400 Red-Orange, Red 300 200 100 0 0.0 1.0 2.0 3.0 4.0 5.0 Forward Voltage (V) Copyright (c) 2007-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 7 Relative Flux vs Current (Tj = 25C) XLamp (R) XR-C LED Relative Flux vs. Current (TJ = 25 C) 140 Relative Luminous Flux (%) 120 100 80 Green 60 White, Royal Blue, Blue 40 20 0 0 100 200 300 400 500 Forward Current (mA) 120 Relative Luminous Flux (%) 100 80 60 Amber 40 20 0 0 100 200 300 400 Forward Current (mA) Relative Luminous Flux (%) 250 200 150 Red-Orange Red 100 50 0 0 100 200 300 400 500 600 700 Forward Current (mA) Copyright (c) 2007-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 8 XLamp (R) XR-C LED Typical Spatial Distribution Typical Spatial Distribution Relative Luminous Intensity (%) 100 80 White 60 Royal Blue, Blue, Green 40 Amber, RedOrange, Red 20 -100 -80 -60 -40 -20 0 0 20 40 60 80 100 Angle () Copyright (c) 2007-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 9 XLamp (R) XR-C LED Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. Given an existing thermal Thermal resistance of 12 C/W or 15 C/W betweenDesign the junction and the solder point, it is crucial for the end product to be designed in a manner White, Royal Blue, Blue & Green that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. 600 Maximum Current (mA) 500 White Royal Blue Blue Green 400 300 200 Rj-a = 15C/W 100 Amber Rj-a = 25C/W Rj-a = 35C/W 0 0 20 40 60 80 100 120 140 160 100 120 140 160 100 120 140 160 Ambient Temperature (C) 400 Amber Maximum Current (mA) 300 200 100 Rj-a = 20C/W Rj-a = 30C/W Rj-a = 40C/W Red-Orange, Red 0 0 20 40 60 80 Ambient Temperature (C) 800 700 Red-Orange Red Maximum Current (mA) 600 500 400 300 200 Rj-a = 20C/W Rj-a = 30C/W 100 Rj-a = 40C/W 0 0 20 40 60 80 Ambient Temperature (C) Copyright (c) 2007-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 10 XLamp (R) XR-C LED Reflow Soldering Characteristics In testing, Cree has found XLamp XR-C LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25C to Peak IPC/JEDEC J-STD-020C Time Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Lead-Free Solder 1.2 C/second Preheat: Temperature Min (Tsmin) 120 C Preheat: Temperature Max (Tsmax) 170 C Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) 65-150 seconds 217 C 45-90 seconds 235 - 245 C Time Within 5 C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 C/second Time 25 C to Peak Temperature 4 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. Copyright (c) 2007-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 11 XLamp (R) XR-C LED Notes Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree's control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended or provided as specifications. PreRelease Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree's pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree's lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp XR-C LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XR-C LEDs should be handled and stored as MSL 4 per JEDEC J-STD-033, meaning they have limited exposure time before damage to the LED may occur during the soldering operation. The table on the right specifies the maximum exposure time in days depending on temperature and humidity conditions. LEDs with Temp. Maximum Percent Relative Humidity 30% 40% 50% 60% 70% 80% 90% 30 C 9 5 4 3 1 1 1 25 C 12 7 5 4 2 1 1 20 C 17 9 7 6 2 2 1 exposure time longer than the specified maximums must be baked according to the baking conditions listed below. Baking Conditions It is not necessary to bake all XLamp LEDs. Only the LEDs that meet all of the following criteria must be baked: * LEDs that have been removed from the original MBP. * LEDs that have been exposed to a humid environment longer than listed in the Moisture Sensitivity section above. * LEDs that have not been soldered. LEDs should be baked at 70 C for 24 hours. LEDs may be baked on the original reels. Remove LEDs from the MBP before baking. Do not bake parts at temperatures higher than 70 C. This baking operation resets the exposure time as defined in the Moisture Sensitivity section above. Copyright (c) 2007-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 12 XLamp (R) XR-C LED notes - continued Storage Conditions XLamp LEDs that have been removed from the original MBP but not soldered yet should be stored in a room or cabinet that will maintain an atmosphere of 25 5 C and no greater than 10% RH (relative humidity). For LEDs stored in these conditions, storage time does not add to exposure time as defined in the Moisture Sensitivity section above. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Ecology section of the Cree website. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. UL(R) Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Intellectual Property For remote phosphor applications, a separate license to certain Cree patents is required. Copyright (c) 2007-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 13 XLamp (R) XR-C LED Mechanical Dimensions (TA = 25 C) All measurements are .1 mm unless otherwise indicated. Lens Substrate Reflector Reflector Anode Lens Substrate 6.8 mm 4.4 .2 mm Side View 9.0 mm 8.4 mm 5.6 mm 6.46 mm 0.7 mm 7.0 mm Anode Bottom View Top View 8.4 mm 7.0 mm 5.6 mm 0.70 mm 6.46 mm Recommended PC BoardRecommended Solder Pad PC Board Solder Pad Copyright (c) 2007-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 14 XLamp (R) XR-C LED Tape and Reel 1.5 .1 4.0.1 All Cree carrier tapes conform Component Handling Systems Standard. 12.0.1 1.75.10 to EIA-481D, Automated CATHODE SIDE 16.0 +.3 -.0 All dimensions in mm. 13.5 (MIN) 4.0.1 12.0.1 1.75.10 ANODE SIDE 1.5 .1 CATHODE SIDE 5.5.1 +.3 16.0 -.0 13.5 (MIN) ANODE SIDE 5.5.1 START USER FEED DIRECTION 50 EMPTY POCKETS WITH TAPE 60 (MIN) EMPTY POCKETS WITH TAPE 5-10 USER FEED DIRECTION EMPTY POCKTES WITH UNSEALED COVER TAPE START LOADED POCKETS 50 EMPTY POCKETS WITH TAPE LOADED POCKETS 60 (MIN) EMPTY POCKETS WITH TAPE 5-10 EMPTY POCKTES WITH UNSEALED COVER TAPE + 330.2 mm Copyright (c) 2007-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 15 XLamp (R) XR-C LED Humidity Indicator Card (inside bag) Packaging Dessicant (inside bag) Unpackaged Reel Label with Cree Bin Code, Quantity, Reel ID Packaged Reel Dessicant (inside bag) Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Quantity, Reel ID, PO # Humidity Indicator Card (inside bag) Label with Cree Bin Code, Quantity, Reel ID Label with Custo Code, Qty, Reel I Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Patent Label Label with Cree Bin Code, Quantity, Reel ID Patent Label Copyright (c) 2007-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 16 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cree, Inc.: XRCAMB-L1-0000-00J01 XRCAMB-L1-0000-00J03 XRCAMB-L1-0000-00K01 XRCAMB-L1-0000-00K03 XRCAMBL1-0000-00M01 XRCAMB-L1-0000-00M03 XRCBLU-L1-0000-00G01 XRCBLU-L1-0000-00H01 XRCGRN-L1-000000M01 XRCGRN-L1-0000-00M02 XRCGRN-L1-0000-00M03 XRCGRN-L1-0000-00N01 XRCGRN-L1-0000-00N02 XRCGRN-L1-0000-00N03 XRCRDO-L1-0000-00K01 XRCRDO-L1-0000-00K02 XRCRDO-L1-0000-00K03 XRCRDOL1-0000-00M01 XRCRDO-L1-0000-00M02 XRCRDO-L1-0000-00M03 XRCRED-L1-0000-00J01 XRCRED-L1-000000J02 XRCRED-L1-0000-00K01 XRCRED-L1-0000-00K02 XRCRED-L1-0000-00M01 XRCRED-L1-0000-00M02 XRCROY-L1-0000-00701 XRCROY-L1-0000-00702 XRCROY-L1-0000-00703 XRCROY-L1-0000-00801 XRCROYL1-0000-00802 XRCROY-L1-0000-00803 XRCWHT-L1-0000-004A9 XRCWHT-L1-0000-004AA XRCWHT-L1-0000004B8 XRCWHT-L1-0000-004B9 XRCWHT-L1-0000-004E8 XRCWHT-L1-0000-004F8 XRCWHT-L1-0000-005A5 XRCWHT-L1-0000-005A6 XRCWHT-L1-0000-005A7 XRCWHT-L1-0000-005A8 XRCWHT-L1-0000-005A9 XRCWHTL1-0000-005AA XRCWHT-L1-0000-005B4 XRCWHT-L1-0000-005B5 XRCWHT-L1-0000-005B6 XRCWHT-L1-0000005B7 XRCWHT-L1-0000-005B8 XRCWHT-L1-0000-005B9 XRCWHT-L1-0000-005E6 XRCWHT-L1-0000-005E7 XRCWHT-L1-0000-005E8 XRCWHT-L1-0000-005F6 XRCWHT-L1-0000-005F7 XRCWHT-L1-0000-005F8 XRCWHTL1-0000-006A3 XRCWHT-L1-0000-006A4 XRCWHT-L1-0000-006A5 XRCWHT-L1-0000-006A6 XRCWHT-L1-0000006A7 XRCWHT-L1-0000-006A8 XRCWHT-L1-0000-006A9 XRCWHT-L1-0000-006AA XRCWHT-L1-0000-006B2 XRCWHT-L1-0000-006B3 XRCWHT-L1-0000-006B4 XRCWHT-L1-0000-006B5 XRCWHT-L1-0000-006B7 XRCWHTL1-0000-006B8 XRCWHT-L1-0000-006B9 XRCWHT-L1-0000-006E5 XRCWHT-L1-0000-006E6 XRCWHT-L1-0000006E7 XRCWHT-L1-0000-006E8 XRCWHT-L1-0000-006F5 XRCWHT-L1-0000-006F6 XRCWHT-L1-0000-006F7 XRCWHT-L1-0000-006F8 XRCWHT-L1-0000-007A1 XRCWHT-L1-0000-007A2 XRCWHT-L1-0000-007A3 XRCWHTL1-0000-007A4 XRCWHT-L1-0000-007A5 XRCWHT-L1-0000-007A6 XRCWHT-L1-0000-007A7 XRCWHT-L1-0000007A8 XRCWHT-L1-0000-007B1 XRCWHT-L1-0000-007B2 XRCWHT-L1-0000-007B3 XRCWHT-L1-0000-007B4 XRCWHT-L1-0000-007B5 XRCWHT-L1-0000-007B6 XRCWHT-L1-0000-007B7 XRCWHT-L1-0000-007E3 XRCWHTL1-0000-007E4 XRCWHT-L1-0000-007E5 XRCWHT-L1-0000-007E6 XRCWHT-L1-0000-007E7 XRCWHT-L1-0000007F4