XR46000 Product Brief N-Channel Power MOSFET Description The XR46000 is a silicon N-channel enhanced power MOSFET. With low conduction loss, good switching performance and high avalanche energy, it is suitable for various power supply system, especially for AC step driving application for LED lighting. The package type is SOT-223, which comply with the RoHS standard. Key Parameters VDSS 600V ID 1.5A PD (TC = 25C) 20W RDS,ON,typ 7.0 Equivalent Circuit FEATURES Fast switching ESD improved capability Low gate charge (Typ. 7.5nC) Low reverse transfer capacitance (Typ. 5.0pF) APPLICATIONS LED lighting applications Downlight High bay Specialty Architectural Pin Configuration Drain Drain 1 Gate Gate 2 3 Drain Source SOT-223, Top View Source Figure 1. Equivalent Cirucit 1/2 XR46000 Product Brief Ordering Information(1) Part Number XR46000ESETR XR46000ECF Operating Temperature Range Lead-Free -40C TJ 150C Yes(2) Package Packaging Method SOT-223 Tape and reel Dice Wafer NOTE: 1. Refer to www.exar.com/XR46000 for most up-to-date Ordering Information. 2. Visit www.exar.com for additional information on Environmental Rating. Please contact LEDtechsupport@exar.com to request a complete datasheet. www.exar.com 48760 Kato Road Fremont, CA 94538 USA Tel.: +1 (510) 668-7000 Fax: +1 (510) 668-7001 Email: LEDtechsupport@exar.com Exar Corporation reserves the right to make changes to the products contained in this publication in order to improve design, performance or reliability. Exar Corporation conveys no license under any patent or other right and makes no representation that the circuits are free of patent infringement. While the information in this publication has been carefully checked, no responsibility, however, is assumed for inaccuracies. Exar Corporation does not recommend the use of any of its products in life support applications where the failure or malfunction of the product can reasonably be expected to cause failure of the life support system or to significantly affect its safety or effectiveness. Products are not authorized for use in such applications unless Exar Corporation receives, in writing, assurances to its satisfaction that: (a) the risk of injury or damage has been minimized; (b) the user assumes all such risks; (c) potential liability of Exar Corporation is adequately protected under the circumstances. Reproduction, in part or whole, without the prior written consent of Exar Corporation is prohibited. Exar, XR and the XR logo are registered trademarks of Exar Corporation. All other trademarks are the property of their respective owners. (c)2016 Exar Corporation XR46000_PB_092316 2/2