THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 26500 SERIES
2
This catalog denes rms MIL-DTL-26500, Series III Connectors. There are varieties of connectors
within this cylindrical family, with the following options and characteristics available:
Two coupling styles: Bayonet and Threaded Plugs and Receptacles.
Both coupling styles inter-mate with MIL-DTL-83723 connectors (exception: shell size 8
threaded, does not mate with M83723 threaded).
Aluminum and passivated stainless steel versions.
A variety of mounting congurations.
A variety of material nishes are oered such as electroless nickel, olive drab cadmium and
black anodizing. Other nishes are available with a commercial equivalent.
Alternate key/keyway positions prevent cross mating of adjacent connectors having the
same insert arrangement.
Positive alignment of pin contacts by the lead in chamfers of the closed entry hard
socket inserts, for select Boeing products.
The elastomer grommet is able to seal over a wide range of wire diameters and has a triple
wire seal in each cavity.
The front release crimped contact retainer system features a retaining clip
captivated by molded in shoulders of each contact cavity in the insulator. This produces a
very stable contact.
Can be ordered by military, Boeing, or equivalent rms part numbers.
CONNECTORS FOR DEMANDING ENVIRONMENTS
THREADED AND BAYONET MILITARY AND COMMERCIAL AVIATION
8600 Evergreen Blvd.
Minneapolis, MN 55433
763.786.1520
800.373.1520
rmsconnectorscs@machine.com
Should you require more information or have a
special application need arise, please contact:
3
Index
rms Connectors Overview ..........4
General Operating Features
Contact Ordering Information
Contacts, Seal Plugs, and Tools
Shell & Insert Conguration.........5
Available Inserts [diagrams]
rms Connectors Continued..........7
General Performance Characteristics
R0716 Series.......................8
Bayonet Plug, MIL-DTL-26500
R0717 Series......................10
Square Flange Bayonet Receptacle, MIL-DTL-26500
R0718 Series......................12
Threaded Plug, MIL-DTL-26500
R0719 Series......................14
Threaded Receptacle, MIL-DTL-26500
R0701 Series......................16
Bayonet Receptacle
R0700 Series......................18
Bayonet Plug, Vibration Resistant
R0700, R0712/R0701 Series .........20
Test Data/Vibration
R0710 Series......................23
Threaded Plug, Self-locking
R0711 Series......................26
Threaded Receptacle
R0710/R0711 Series ...............28
Test Data Vibration
R0712 Series......................29
Bayonet Plug, Vibration Resistant
R0708 Series......................31
Flange Mount Threaded Coupling, Non-removable
for Terminating on PC Board or Flex Circuitry
R0709 Series......................34
Flange Mount Bayonet Coupling, Removable Contact
For Terminating on PC Board or Flex Circuitry
R0713 Series......................38
Flange Mount Bayonet Coupling, Non-removable
Contact for Terminating on PC Board or Flex Circuitry
R0714 Series......................42
Flange Mount Bayonet Coupling, Non-Removable
Contact for Terminating on PC Board or Flex Circuitry
R0715 Series......................44
Special Flange Mount Receptacle
For Conned Space
R0726 Series......................46
Threaded Plug, Self-locking
R0727 Series......................48
Threaded Receptacle
rms Company ....................50
General Information
Distributor Information
* Boeing Commercial Airplane Standard Series
Connectors not shown actual size.
R0716 Series
MS24266
(*BACC45FT)
R0717 Series
MS24264
(*BACC45FN)
R0718 Series
MS24266
(*BACC45FS)
R0719 Series
MS24264
(*BACC45FM)
R0700 Series
(*BACC63CB)
R0701 Series
(*BACC63CC)
R0710 Series
(*BACC63BP)
R0711 Series
(*BACC63BV)
R0712 Series
(*BACC63BN)
R0708 Series
R0709 Series R0713 Series
R0714 Series
R0726 Series
(*BACC DY)
R0715 Series
R0727 Series
(*BACC63DW)
4
rms Connectors Overview
General Operating Features of
Electrical Connectors from rms
This catalog describes several series of
electrical connectors manufactured by rms
that are either listed on QPL-26500 or are
derivatives of MIL-DTL-26500.
Features of the connectors
described include:
1. Meeting requirements of
MIL-DTL-26500.
2. Contacts that are rear insertion/ front
removable, front insertion/ front
removable, and non-removable.
3. Connectors that utilize crimp contact,
wire wrap, or soldering to ex circuitry
and printed circuit boards.
4. Extreme vibration level exposure,
bayonet and threaded coupling.
5. Self-locking threaded coupling
connectors.
Contact Ordering Information
rms connectors may be ordered with or
without contacts by using the order code
included with the rms catalog part number.
Contacts included with the package are
sucient to complete the connector
termination plus two (2) spares. When
contacts are ordered, seal plugs are also
included for use when no wire is terminated.
Three (3) plugs minimum are included up to
a maximum of 15% of contact holes.
Contacts
For use with MIL-DTL-26500 QPL’d Connectors
Contact
Size
Wire Size
AWG
Max. Current
Rating Amps
MS Part Number
Pin Socket
No. 20
24
22
20
3.0
5.0
7.5
M39029/31-627 M39029/32-260
No. 16 18
16
16
22 M39029/31-229 M39029/32-248
No. 12 14
12
32
41 M39029/31-235 M39029/32-254
Contacts
For use with Boeing QPL’d Connectors
Contact
Size
Wire Size
AWG
Max. Current
Rating Amps
*Boeing Part Number
Pin Socket
No. 20
24
22
20
3.0
5.0
7.5
BACC47CN1S BACC47CP1S
No. 16 18
16
16
22 BACC47CN2S BACC47CP2S
No. 12 14
12
32
41 BACC47CN3S BACC47CP3S
* This contact has been Boeing approved for use with high-performance connectors.
Seal Plugs
Size Color Code MS Part Number
20 Red MS27488-20-2
16 Green MS27488-16-2
12 & #1 Shielded Orange MS27488-12-2
Crimp Tool/Turret Removal Tool Insertion Tool
Contact Tools **
Contact Size Crimp Frame Crimp Tool
Turret
Insertion Tool Removal Tool
Superseded No. Current No. Superseded No. Current No.
No. 20
M22520/1-01 M22520/01-02
MS24256A20 M81969/17-03
DAK-379 * MS24256R20 M81969/19-06
No. 16 MS24256A16 M81969/17-04 MS24256R16 M81969/19-01
No. 12 MS24256A12 M81969/17-05 MS24256R12 M81969/19-02
* May be used when wire size is less than .060 diameter.
** Tools are listed for reference only. They are available from Tool Manufacturers or their authorized distributor.
4
rms Connectors Overview
General Operating Features of
Electrical Connectors from rms
This catalog describes several series of
electrical connectors manufactured by rms
that are either listed on QPL-26500 or are
derivatives of MIL-DTL-26500.
Features of the connectors
described include:
1. Meeting requirements of
MIL-DTL-26500.
2. Contacts that are rear insertion/ front
removable, front insertion/ front
removable, and non-removable.
3. Connectors that utilize crimp contact,
wire wrap, or soldering to ex circuitry
and printed circuit boards.
4. Extreme vibration level exposure,
bayonet and threaded coupling.
5. Self-locking threaded coupling
connectors.
Contact Ordering Information
rms connectors may be ordered with or
without contacts by using the order code
included with the rms catalog part number.
Contacts included with the package are
sucient to complete the connector
termination plus two (2) spares. When
contacts are ordered, seal plugs are also
included for use when no wire is terminated.
Three (3) plugs minimum are included up to
a maximum of 15% of contact holes.
Contacts
For use with MIL-DTL-26500 QPL’d Connectors
Contact
Size
Wire Size
AWG
Max. Current
Rating Amps
MS Part Number
Pin Socket
No. 20
24
22
20
3.0
5.0
7.5
M39029/31-627 M39029/32-260
No. 16 18
16
16
22 M39029/31-229 M39029/32-248
No. 12 14
12
32
41 M39029/31-235 M39029/32-254
Contacts
For use with Boeing QPL’d Connectors
Contact
Size
Wire Size
AWG
Max. Current
Rating Amps
*Boeing Part Number
Pin Socket
No. 20
24
22
20
3.0
5.0
7.5
BACC47CN1S BACC47CP1S
No. 16 18
16
16
22 BACC47CN2S BACC47CP2S
No. 12 14
12
32
41 BACC47CN3S BACC47CP3S
* This contact has been Boeing approved for use with high-performance connectors.
Seal Plugs
Size Color Code MS Part Number
20 Red MS27488-20-2
16 Green MS27488-16-2
12 & #1 Shielded Orange MS27488-12-2
Crimp Tool/Turret Removal Tool Insertion Tool
Contact Tools **
Contact Size Crimp Frame Crimp Tool
Turret
Insertion Tool Removal Tool
Superseded No. Current No. Superseded No. Current No.
No. 20
M22520/1-01 M22520/01-02
MS24256A20 M81969/17-03
DAK-379 * MS24256R20 M81969/19-06
No. 16 MS24256A16 M81969/17-04 MS24256R16 M81969/19-01
No. 12 MS24256A12 M81969/17-05 MS24256R12 M81969/19-02
* May be used when wire size is less than .060 diameter.
** Tools are listed for reference only. They are available from Tool Manufacturers or their authorized distributor.
55
Shell & Insert Configuration
(Showing front face of socket inserts)
* - rms designation
t - #1 shielded contact is interchangeable with #12 power contact
Consult factory for insert availability within a connector series.
Insert Arrangements are per MIL-STD-1554 except 24-30 and 28-42, which are included in Boeing standards.
Shell Size - 20
Shell Size - 18Shell Size - 16
Shell Size - 14
Shell Size - 8
Shell Size - 10 Shell Size - 12
2 #20 Contacts
Insert 8-2
08-02*
2 #16 Contacts
1 #2 Shielded Contact
Insert 14-3
14-03*
4 #12 contacts
Insert 14-4t
14-04*
7 #16 contacts
Insert 14-7
14-07*
9 #20 contacts
3 #16 contacts
Insert 14-12
15 #20 contacts
Insert 14-15
10 #16 contacts
Insert 16-10
16 #16 contacts
Insert 20-16 19 #20 contacts
6 #12 contacts
Insert 20-25t
24 #20 contacts
4 #12 contacts
Insert 20-28t
37 #20 contacts
2 #16 contacts
Insert 20-39
41 #20 contacts
Insert 20-41
24 #20 contacts
Insert 16-24 8 #12 contacts
Insert 18-8t
18-08*
10 #16 contacts
1 #2 shielded contact
Insert 18-11
14 #16 contacts
Insert 18-14 31 #20 contacts
Insert 18-31
3 #20 Contacts
Insert 8-3
08-03*
2 #20 Contacts
Insert 10-2
10-02*
2 #16 Contacts
Insert 10-20
5 #20 Contacts
Insert 10-5
10-05*
3 #16 Contacts
Insert 12-3
12-03*
12 #20 Contacts
Insert 12-12
(Continued On Next Page) 5
(Continued On Next Page)
6
* - rms designation
t - #1 shielded contact is interchangeable with #12 power contact
Consult factory for insert availability within a connector series.
Insert Arrangements are per MIL-STD-1554 except 24-30 and 28-42, which are included in Boeing standards.
Shell Size - 28
Shell Size - 24
Shell Size - 22
12 #12 contacts
Insert 22-12t 19 #16 contacts
Insert 22-19
27 #20 contacts
12 #16 contacts
Insert 22-39
30 #16 contacts
Insert 24-30 23 #20 contacts
20 #16 contacts
Insert 24-43
55 #20 contacts
2 #12 contacts
Insert 24-57t
61 #20 contacts
Insert 24-61
42 #16 contacts
Insert 28-42
55 #20 contacts
Insert 22-55
26 #20 contacts
6 #12 contacts
Insert 22-32t
Shell & Insert Configuration Continued
6
7
General Performance Characteristics
Test Description Test Requirement Test Result
Maintenance Aging Connectors shall be coupled and uncoupled 10 times.
Minimum of 10 contacts removed and reinserted
10 times. Connectors shall meet requirements of all
succeeding tests.
There was no observable damage. Connectors met or
exceeded requirements of all succeeding tests.
Contact Retention Axial loads (20 lbs.—size 20; 25 lbs.—size 16; 30
lbs.—size 12) shall be applied to the front and rear
of individual contacts in unmated connectors. The
rate of application shall be approximately one pound
per second. Axial displacement shall be .012 inch
maximum when the pressure is applied from the
front side.
Maintains load after 10 cycles. Axial displacement was
within requirements.
Dielectric
Withstanding Voltage
Altitude and Sea
Level
Mated connectors shall be subjected to 1000 volts
rms at altitudes up to 110,000 feet and 1500 volts
rms at sea level. Unmated connectors shall be
subjected to 250 volts rms at altitudes up to 110,000
feet and 1500 volts rms at sea level. There shall be no
evidence of breakdown or ashover.
There was no evidence of breakdown or ashover.
Thermal Shock Mated connectors shall be exposed for 30 minutes
to each temperature from -55°C to +200°C. Transfers
between temperatures begin at -55°C and are
made within two minutes. There shall be no damage
detrimental to connector operation.
After ve cycles, there was no evidence of cracking,
fracture, or other damage detrimental to connector
operation.
Vibration Completely wired and mated connectors shall be
mounted on an appropriate xture on a vibration
table. All contacts shall be wired in series. Current
level shall be 100 milliamperes. There shall be no
continuity interruption longer than 1 microsecond,
contact chatter, or physical damage to the
connectors.
There was no intermittency or evidence of physical
damage to the connector.
Durability Connectors shall be mated and unmated 500
times (Bayonet) or 200 times (Threaded), without
producing physical or electrical defects detrimental to
operation. They shall meet requirements of Dielectric
Withstanding Voltage test.
There was no damaged detrimental to connector
operation. Dielectric Withstanding Voltage test was
passed.
Corrosion Unmated connectors shall be exposed to a salt spray
for 48 hours without exposing base metal.
There was no exposure of base metal. Connector
mated satisfactorily three times.
Ozone Exposure Unmated connectors shall be exposed at room
temperature to air containing a minimum ozone
concentration of 0.01 to 0.05 percent by volume.
There shall be no evidence of deterioration.
No damaged occurred to connector dielectric.
Insulation Resistance As measured between ve pairs of adjacent contacts
and three contacts closest to the shell and the shell
itself, insulation resistance shall be 5000 megohms
minimum, measured after Maintenance Aging.
Insulation resistance was in excess of 5000 megohms.
Altitude Immersion Mated connectors shall support 1500 volts rms
submerged in salt water for 30 minutes while
pressure is alternated between sea level and 75,000
feet altitude equivalents.
There was no ashover or breakdown. Insulation
resistance requirement was checked and met or
exceeded.
Temperature Life Connectors shall carry specied current for 1000
hours with internal temperatures not to exceed
238°C.
Connectors carried specied current for 1000 hours.
Moisture Resistance Per MIL-STD-202, method 106. Connectors shall
maintain insulation resistance of 1000 megohms
minimum.
Insulation resistance was greater than 1000
megohms.
Fluid Immersion Unmated connectors shall be immersed in uid (MIL-
PRF-5606 hydraulic uid or MIL-PRF-23699 lubrication
oil) for 20 hours. They shall couple properly and
support 1500 volts ac rms.
Immersed connectors mated and unmated properly
and withstood 1500 volts ac (rms) applied with no
ashover or leakage breakdown.
7
8
R0716 Series
Bayonet Plug
R0716XXXXXXX
MS24266RXXBXXXX
Shell Polarity
Polarity
For Connectors Size 8 and 10 For Connectors Size
12, 14, 16, 18, 20, 22, and 24
A B C D A B C D
Normal 105° 140° 215° 265° 105° 140° 215° 265°
6 102° 132° 248° 320° 18° 149° 192° 259°
7 80° 118° 230° 312° 92° 152° 222° 342°
8 35° 140° 205° 275° 84° 152° 204° 334°
9 64° 155° 234° 304° 24° 135° 199° 240°
10* 25° 115° 220° 270° 98° 152° 268° 338°
* Not available in size 8 connector
Shell Size E Dia. Max F Dia. Max G Dia. Max H Thread
8 .328 .437 .776 7/16-28 UNEF-2A
10 .420 .562 .906 9/16-24 UNEF-2A
12 .580 .750 1.078 3/4-20 UNEF-2A
14 .664 .812 1.141 13/16-20 UNEF-2A
16 .769 .938 1.266 15/16-20 UNEF-2A
18 .902 1.062 1.375 1 1/16-18 UNEF-2A
20 1.033 1.182 1.510 1 3/16-18 UNEF-2A
22 1.152 1.312 1.625 1 5/16-18 UNEF-2A
24 1.282 1.432 1.760 1 7/16-18 UNEF-2A
Dimensions
Master Key
Not Shown Actual Size
9
The R0716 Series connectors are qualied
to, and meet, the requirements of MIL-
DTL-26500 Class R, Type B; MS24266 Type B;
and Boeing Standard BACC45FT.
The connector is bayonet coupled with
rear insertion, front release contacts. The
connector can be ordered either with or
without gold plated contacts by using the
order code associated with the rms number.
When ordering by the MS number, the
connector is supplied with gold plated
contacts. If the connector is to be ordered
by the MS number, but the contacts are not
required, use the phrase, “less contacts.”
For contact, seal plug and tooling
information, see page 4.
How to Order
rms Catalog Number
R0716 10 R 05 P N - 0 00
00 - Less Cable Clamp
01 - With Right Angle Cable Clamp
02 - With Straight Cable Clamp
03 - With Right Angle Single Leg Cable Clamp
04 - With Straight Single Leg Cable Clamp
05 - With Straight Composite Cable Clamp
0 - Less Contacts
2 - With Gold Plated Boeing Contacts
3 - With Gold Plated MS Contacts
Shell Keyway Position N, 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
Class B Meets requirements of Boeing standard BACC45FT.
Anodized aluminum shell, environment resisting.
Arrangements with size 20 contact cavities will have reduced diameter
wire seals, improved collet design, and hard front face for socket inserts.
Class R Meets requirements of MIL-DTL-26500. Anodized aluminum
shell, environment resisting.
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24
Series Designation Connector, Plug, Straight, Electric, Bayonet Coupling
Boeing Part Number (Reference)
BACC45FT 10 - 5 P 6 H
Blank - With Contacts and Seal Plugs
H - Without Contacts and Seal Plugs
Shell Keyway Position N (Blank), 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
“-” - Without Cable Clamp
A - With BACC10GH Straight Single Leg Cable Clamp
B - With MS27559 Right Angle Cable Clamp
C - With MS27291 Straight Cable Clamp
D - With BACC10JC Right Angle Single Leg Cable Clamp
E - With BACC10JS Straight Single Leg Composite Cable Clamp
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24
Series Designation Connector, Electrical, Plug, Straight, Bayonet Coupling
Military Standard Part Number
MS24266 R 10 B 5 P N
Shell Keyway Position N, 6, 7, 8, 9, or Y
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
Bayonet Coupling
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24
Class R Environmental
Series Designation Connector, Plug, Straight, Electric
Consult Factory for
Other Options
10
R0717 Series
Square Flange
Bayonet Receptacle
R0717XXXXXXX
MS24264RXXBXXXX
Shell Polarity
Polarity
For Connectors Size 8 and 10 For Connectors Size
12, 14, 16, 18, 20, 22, and 24
A B C D A B C D
Normal 105° 140° 215° 265° 105° 140° 215° 265°
6 102° 132° 248° 320° 18° 149° 192° 259°
7 80° 118° 230° 312° 92° 152° 222° 342°
8 35° 140° 205° 275° 84° 152° 204° 334°
9 64° 155° 234° 304° 24° 135° 199° 240°
10* 25° 115° 220° 270° 98° 152° 268° 338°
* Not Available in Size 8 Connector
Shell
Size
E
.005
F
.005
G Dia.
+.000
-.009
H Dia.
Max.
J Dia.
Max.
K Dia.
Max.
L
Thread
M Dia.
Min.
N Dia.
Min.
8 .812 .594 .125 .561 .328 .437 7/16-28
UNEF-2A .620 .447
10 .937 .719 .125 .696 .420 .562 9/16-24
UNEF-2A .748 .572
12 1.031 .812 .125 .875 .580 .750 3/4-20
UNEF-2A .913 .760
14 1.125 .906 .125 .935 .664 .812 13/16-20
UNEF-2A .980 .822
16 1.250 .969 .125 1.062 .769 .938 15/16-20
UNEF-2A 1.107 .948
18 1.343 1.062 .125 1.187 .902 1.062 1 1/16-18
UNEF-2A 1.209 1.072
20 1.437 1.156 .125 1.312 1.033 1.182 1 3/16-18
UNEF-2A 1.337 1.192
22 1.562 1.250 .125 1.437 1.152 1.312 1 5/16-18
UNEF-2A 1.452 1.322
24 1.703 1.375 .154 1.562 1.282 1.432 1 7/16-18
UNEF-2A 1.577 1.442
Dimensions
Master Key
Not Shown Actual Size
Panel Mounting
Hole Cut-out
11
The R0717 Series connectors are qualied
to, and meet, the requirements of MIL-
DTL-26500 Class R, Type B; MS24264 Type B;
and Boeing Standard BACC45FN.
The connector is bayonet coupled with
rear insertion, front release contacts. The
connector can be ordered either with or
without gold plated contacts by using the
order code associated with the rms number.
When ordering by the MS number, the
connector is supplied with gold plated
contacts. If the connector is to be ordered
by the MS number, but the contacts are not
required, use the phrase, “less contacts”.
For contact, seal plug and tooling
information, see page 4.
How to Order
rms Catalog Number
R0717 10 R 05 P N - 0 00
00 - Less Cable Clamp
01 - With Right Angle Cable Clamp
02 - With Straight Cable Clamp
03 - With Right Angle Single Leg Cable Clamp
04 - With Straight Single Leg Cable Clamp
05 - With Straight Composite Cable Clamp
0 - Less Contacts
2 - With Gold Plated Boeing Contacts
3 - With Gold Plated MS Contacts
Shell Keyway Position N, 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
Class B Meets requirements of Boeing standard BACC45FN.
Anodized aluminum shell, environment resisting.
Arrangements with size 20 contact cavities will have reduced diameter
wire seals, improved collet design, and hard front face for socket inserts.
Class R Meets requirements of MIL-DTL-26500. Anodized aluminum
shell, environment resisting.
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24
Series Designation Connector, Receptacle, Electric, Bayonet Coupling, Square Flange Mount
Boeing Part Number (Reference)
BACC45FN 10 - 5 P 6 H
Blank - With Contacts and Seal Plugs
H - Without Contacts and Seal Plugs
Shell Keyway Position N (Blank), 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
“-” - Without Cable Clamp
A - With BACC10GH Straight Single Leg Cable Clamp
B - With MS27559 Right Angle Cable Clamp
C - With MS27291 Straight Cable Clamp
D - With BACC10JC Right Angle Single Leg Cable Clamp
E - With BACC10JS Straight Single Leg Composite Cable Clamp
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24
Series Designation Connector, Electrical, Receptacle, Flange Mount, Bayonet Coupling
Military Standard Part Number
MS24264 R 10 B 5 P N
Shell Keyway Position N, 6, 7, 8, 9, or Y
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
Bayonet Coupling
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24
Class R Environmental
Series Designation Connector, Receptacle, Electric
Consult Factory for
Other Options
12
R0718 Series
Threaded Plug
R0718XXXXXXX
MS24266RXXTXXXX
Dimensions
Master Key
Shell Polarity
Polarity
For Connectors Size 8 and 10 For Connectors Size
12, 14, 16, 18, 20, 22, and 24
A B C D A B C D
Normal 105° 140° 215° 265° 105° 140° 215° 265°
6 102° 132° 248° 320° 18° 149° 192° 259°
7 80° 118° 230° 312° 92° 152° 222° 342°
8 35° 140° 205° 275° 84° 152° 204° 334°
9 64° 155° 234° 304° 24° 135° 199° 240°
10* 25° 115° 220° 270° 98° 152° 268° 338°
* Not Available in Size 8 Connector
Shell Size E Dia. Max. F Dia. Max. G Dia. Max. H Thread
8 .328 .437 .776 7/16-28 UNEF-2A
10 .420 .562 .906 9/16-24 UNEF-2A
12 .580 .750 1.078 3/4-20 UNEF-2A
14 .664 .812 1.141 13/16-20 UNEF-2A
16 .769 .938 1.266 15/16-20 UNEF-2A
18 .902 1.062 1.375 1 1/16-18 UNEF-2A
20 1.033 1.182 1.510 1 3/16-18 UNEF-2A
22 1.152 1.312 1.625 1 5/16-18 UNEF-2A
24 1.282 1.432 1.760 1 7/16-18 UNEF-2A
Not Shown Actual Size
13
The R0718 Series connectors are qualied
to, and meet the requirements of MIL-
DTL-26500 Class R, Type T; MS24266 Type T;
and Boeing Standard BACC45FS.
The connector is thread coupled with
rear insertion, front release contacts. The
connector may be ordered either with or
without gold plated contacts by using the
code associated with the rms number.
When ordering by the MS number, the
connector is supplied with gold plated
contacts. If the connector is to be ordered
by the MS number, but the contacts are not
required, use the phrase, “less contacts”.
For contact, seal plug, and tooling
information see page 4.
How to Order
rms Catalog Number
R0718 10 R 05 P N - 0 00
00 - Less Cable Clamp
01 - With Right Angle Cable Clamp
02 - With Straight Cable Clamp
03 - With Right Angle Single Leg Cable Clamp
04 - With Straight Single Leg Cable Clamp
05 - With Straight Composite Cable Clamp
0 - Less Contacts
2 - With Gold Plated Boeing Contacts
3 - With Gold Plated MS Contacts
Shell Keyway Position N, 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
Class B Meets requirements of Boeing standard BACC45FS.
Anodized aluminum shell, environment resisting.
Arrangements with size 20 contact cavities will have reduced diameter
wire seals, improved collet design, and hard front face for socket inserts.
Class R Meets requirements of MIL-DTL-26500. Anodized aluminum
shell, environment resisting.
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24
Series Designation Connector, Plug, Straight, Electric, Threaded Coupling
Boeing Part Number (Reference)
BACC45FS 10 - 5 P 6 H
Blank - With Contacts and Seal Plugs
H - Without Contacts and Seal Plugs
Shell Keyway Position N (Blank), 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
“-” - Without Cable Clamp
A - With BACC10GH Straight Single Leg Cable Clamp
B - With MS27559 Right Angle Cable Clamp
C - With MS27291 Straight Cable Clamp
D - With BACC10JC Right Angle Single Leg Cable Clamp
E - With BACC10JS Straight Single Leg Composite Cable Clamp
Shell Size 10, 12, 14, 16, 18, 22
Series Designation Connector, Electrical, Plug, Straight, Threaded Coupling
Military Standard Part Number
MS24266 R 10 T 5 P N
Shell Keyway Position N, 6, 7, 8, 9, or Y
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
Threaded Coupling
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24
Class R Environmental
Series Designation Connector, Plug, Straight, Electric
Consult Factory for
Other Options
14
R0719 Series
Threaded Receptacle
R0719XXXXXXX
MS24264RXXTXXXX
Dimensions
Master Key
Panel Mounting
Hole Cut-out
Shell Polarity
Polarity
For Connectors Size 8 and 10 For Connectors Size
12, 14, 16, 18, 20, 22, and 24
A B C D A B C D
Normal 105° 140° 215° 265° 105° 140° 215° 265°
6 102° 132° 248° 320° 18° 149° 192° 259°
7 80° 118° 230° 312° 92° 152° 222° 342°
8 35° 140° 205° 275° 84° 152° 204° 334°
9 64° 155° 234° 304° 24° 135° 199° 240°
10* 25° 115° 220° 270° 98° 152° 268° 338°
* Not Available in Size 8 Connector
Shell
Size
E
.005
F
.005
G Dia.
+.000
-.009
H Dia.
Max.
J Dia.
Max.
K Dia.
Max.
L
Thread
M
Thread
N Dia.
Min.
P Dia.
Min.
8 .812 .594 .125 .561 .328 .437 9/16-24
UNEF-2A
7/16-28
UNEF-2A .620 .477
10 .937 .719 .125 .696 .420 .562 11/16-24
UNEF-2A
9/16-24
UNEF-2A .748 .572
12 1.031 .812 .125 .875 .580 .750 7/8-20
UNEF-2A
3/4-20
UNEF-2A .913 .760
14 1.125 .906 .125 .935 .664 .812 15/16-20
UNEF-2A
13/16-20
UNEF-2A .980 .822
16 1.250 .969 .125 1.062 .769 .938 1 1/16-18
UNEF-2A
15/16-20
UNEF-2A 1.107 .948
18 1.343 1.062 .125 1.187 .902 1.062 1 3/16-18
UNEF-2A
1 1/16-18
UNEF-2A 1.209 1.072
20 1.437 1.156 .125 1.312 1.033 1.182 1 5/16-18
UNEF-2A
1 3/16-18
UNEF-2A 1.337 1.192
22 1.562 1.250 .125 1.437 1.152 1.312 1 7/16-18
UNEF-2A
1 5/16-18
UNEF-2A 1.452 1.322
24 1.703 1.375 .154 1.562 1.282 1.432 1 9/16-18
UNEF-2A
1 7/16-18
UNEF-2A 1.577 1.442
Not Shown Actual Size
15
The R0719 Series connectors are qualied
to, and meet, the requirements of MIL-
DTL-26500 Class R, Type T; MS24264 Type T;
and Boeing standard BACC45FM.
The connector is thread coupled with
rear insertion, front release contacts. The
connector may be ordered either with or
without gold plated contacts by using the
order code associated with the rms number.
When ordering by the MS number, the
connector is supplied with gold plated
contacts. If the connector is to be ordered
by the MS number, but the contacts are not
required, use the phrase, “less contacts”.
For contact, seal plug, and tooling
information see page 4.
How to Order
rms Catalog Number
R0719 10 R 05 P N - 0 00
00 - Less Cable Clamp
01 - With Right Angle Cable Clamp
02 - With Straight Cable Clamp
03 - With Right Angle Single Leg Cable Clamp
04 - With Straight Single Leg Cable Clamp
05 - With Straight Composite Cable Clamp
0 - Less Contacts
2 - With Gold Plated Boeing Contacts
3 - With Gold Plated MS Contacts
Shell Keyway Position N, 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
Class B Meets requirements of Boeing standard BACC45FM.
Anodized aluminum shell, environment resisting.
Arrangements with size 20 contact cavities will have reduced diameter
wire seals, improved collet design, and hard front face for socket inserts.
Class R Meets requirements of MIL-DTL-26500. Anodized aluminum
shell, environment resisting.
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24
Series Designation Connector, Receptacle, Threaded Coupling, Square Flange Mount
Boeing Part Number (Reference)
BACC45FM 10 - 5 P 6 H
Blank - With Contacts and Seal Plugs
H - Without Contacts and Seal Plugs
Shell Keyway Position N (Blank), 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
“-” - Without Cable Clamp
A - With BACC10GH Straight Single Leg Cable Clamp
B - With MS27559 Right Angle Cable Clamp
C - With MS27291 Straight Cable Clamp
D - With BACC10JC Right Angle Single Leg Cable Clamp
E - With BACC10JS Straight Single Leg Composite Cable Clamp
Shell Size 10, 12, 14, 16, 18, 22
Series Designation Connector, Electrical, Receptacle, Flange Mount, Threaded Coupling
Military Standard Part Number
MS24264 R 10 T 5 P N
Shell Keyway Position N, 6, 7, 8, 9, or Y
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
Threaded Coupling
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24
Class R Environmental
Series Designation Connector, Receptacle, Straight, Electric
Consult Factory for
Other Options
16
R0701 Series
Square Flange
Bayonet Receptacle
R0701XXXXXXX
Shell Polarity
Polarity
For Connectors Size 8 and 10 For Connectors Size
12, 14, 16, 18, 20, 22, 24 and 28
A B C D A B C D
Normal 105° 140° 215° 265° 105° 140° 215° 265°
6 102° 132° 248° 320° 18° 149° 192° 259°
7 80° 118° 230° 312° 92° 152° 222° 342°
8 35° 140° 205° 275° 84° 152° 204° 334°
9 64° 155° 234° 304° 24° 135° 199° 240°
10* 25° 115° 220° 270° 98° 152° 268° 338°
* Not available in size 8 connector
Shell
Size
E
.005
F
.005
G Dia.
+.000
–.009
H
Dia.
Max.
J
Dia.
Max.
K
Dia.
Max.
L
Thread
M
Dia.
Min.
N
Dia.
Min.
8 .812 .594 .125 .328 .500 .561 1/2-20
UNF-2A .620 .510
10 .937 .719 .125 .420 .625 .696 5/8-24
UNEF-2A .748 .635
12 1.031 .812 .125 .580 .750 .875 3/4-20
UNEF-2A .913 .760
14 1.125 .906 .125 .664 .875 .935 7/8-20
UNEF-2A .980 .885
16 1.250 .969 .125 .769 1.000 1.062 1-20
UNEF-2A 1.107 1.010
18 1.343 1.062 .125 .902 1.062 1.187 1 1/16-18
UNEF-2A 1.209 1.072
20 1.437 1.156 .125 1.033 1.187 1.312 1 3/16-18
UNEF-2A 1.337 1.192
22 1.562 1.250 .125 1.152 1.312 1.437 1 5/16-18
UNEF-2A 1.452 1.322
24 1.703 1.375 .154 1.282 1.437 1.562 1 7/16-18
UNEF-2A 1.577 1.442
28 2.000 1.562 .154 1.500 1.750 1.812 1 3/4-18
UNS-2A 1.827 1.760
Dimensions
Master Key
Panel Mounting
Hole Cut-out
Not Shown Actual Size
17
The R0701 Series connectors meet
the performance requirements of MIL-
DTL-26500 Class R, Type B; MS24264, Type
B; and Boeing Standard BACC63CC.
The connector is bayonet coupled with
rear insertion, front release contacts. The
connector can be ordered either with or
without gold plated contacts by using the
order code associated with the rms number.
For contact, seal plug, and tooling
information, see page 4.
How to Order
rms Catalog Number
R0701 10 B 05 P N - 0 00
00 - Less Cable Clamp
01 - With BACC10HG Right Angle Cable Clamp
02 - With BACC10HF Straight Cable Clamp
03 - With Straight Shielding Clamp
04 - With Straight Shielding Clamp
05 - With 45 Degree Cable Clamp
06 - With BACC10KB or BACC10KE 90 Degree Cable Clamp
07 - With BACC10KA or BACC10KD Straight Cable Clamp
08 - With BACC10KC or BACC10KF 45 Degree Cable Clamp
0 - Less Contacts
2 - With Gold Plated Boeing Contacts
Shell Keyway Position N, 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
Class A Hard anodized aluminum shell, color black with uorosilicone insert and grommet
material. Consult factory for availability.
Class B Cadmium with clear chromate conversion over electroless nickel plated aluminum
shell. Connectors have uorosilicone insert and grommet material. Socket style connectors
have a hard face socket insert. Qualied to BACC63CC. Class code “B” only available in those
insert arrangements that have size 20 contacts.
Class G Cadmium with clear chromate conversion over electroless nickel plated aluminum
shell with uorosilicone insert and grommet material. Qualied to BACC63CC. Class code “G”
only available for those insert arrangements that have no size 20 contacts.
Class N Electroless nickel plated aluminum shell. Connectors have uorosilicone insert and
grommet material. Consult factory for availability.
Class S Passivated stainless steel shell with uorosilicone insert and grommet material.
Consult factory for availability.
Class W Cadmium, with olive drab chromate conversion over electroless nickel plated
aluminum shell with uorosilicone insert and grommet material. Consult factory for availability.
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24, 28
Series Designation Connector, Receptacle, Bayonet Coupling, Square Flange Mount
Boeing Part Number (Reference)
BACC63CC 10 - 5 P N H
Blank - With Contacts and Seal Plugs
H - Without Contacts and Seal Plugs
Shell Keyway Position N, 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24, 28
Series Designation Connector, Electrical, Receptacle, Straight, Bayonet Coupling, Vibration Resistant
Consult Factory for
Other Options
18
R0700 Series
Bayonet Plug
R0700XXXXXXX
Shell Polarity
Polarity
For Connectors Size 8 and 10 For Connectors Sizes
12, 14, 16, 18, 20, 22, 24 and 28
A B C D A B C D
Normal 105° 140° 215° 265° 105° 140° 215° 265°
6 102° 132° 248° 320° 18° 149° 192° 259°
7 80° 118° 230° 312° 92° 152° 222° 342°
8 35° 140° 205° 275° 84° 152° 204° 334°
9 64° 155° 234° 304° 24° 135° 199° 240°
10* 25° 115° 220° 270° 98° 152° 268° 338°
* Not Available in Size 8 Connector
Shell Size E Dia. Max F Dia. Max G Dia. Max H Thread
8 .328 .500 .814 1/2-20 UNF-2A
10 .420 .625 .972 5/8-24 UNEF-2A
12 .580 .750 1.083 3/4-20 UNEF-2A
14 .664 .875 1.194 7/8-20 UNEF-2A
16 .769 1.000 1.315 1-20 UNEF-2A
18 .902 1.062 1.380 1 1/16-18 UNEF-2A
20 1.033 1.187 1.510 1 3/16-18 UNEF-2A
22 1.152 1.312 1.630 1 5/16-18 UNEF-2A
24 1.282 1.437 1.760 1 7/16-18 UNEF-2A
28 1.500 1.750 2.165 1 3/4-18 UNS-2A
Dimensions
Master Key
Not Shown Actual Size
19
The R0700 Series connectors meet the
performance requirements of MIL-
DTL-26500 Class R, Type B; MS24266 Type
B; and Boeing standard BACC63CB.
The connector is bayonet coupled with
rear insertion, front release contacts. The
connector can be ordered either with
or without gold plated contacts by using
the order code associated with the rms
number.
For contact, seal plug, and tooling
information, see page 4.
How to Order
rms Catalog Number
R0700 10 B 05 P N - 0 00
00 - Less Cable Clamp
01 - With BACC10HG Right Angle Cable Clamp
02 - With BACC10HF Straight Cable Clamp
03 - With Straight Shielding Clamp
04 - With Straight Shielding Clamp
05 - With 45 Degree Cable Clamp
06 - With BACC10KB or BACC10KE 90 Degree Cable Clamp
07 - With BACC10KA or BACC10KD Straight Cable Clamp
08 - With BACC10KC or BACC10KF 45 Degree Cable Clamp
0 - Less Contacts
2 - With Gold Plated Boeing Contacts
Shell Keyway Position N, 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
Class A Hard Anodized Aluminum shells and coupling ring, color black with uorosilicone
insert and grommet material. Consult factory for availability.
Class B Cadmium with clear chromate conversion over electroless nickel plated aluminum
shells. The shell has a ground spring. The coupling ring shall be hard anodized, color black.
Connectors have uorosilicone insert and grommet material. Socket style connectors have a
hard face socket insert. Qualied to BACC63CB. Class code “B” only available in those insert
arrangements that have size 20 contacts.
Class G Cadmium with clear chromate conversion over electroless nickel plated aluminum
shells with uorosilicone insert and grommet material. The shell has a ground spring. The
coupling ring shall be Hard Anodized, color black. Qualied to BACC63CB. Class code “G”
only available for those insert arrangements that have no size 20 contacts.
Class N Electroless nickel plated aluminum shells. The shell has a ground spring. The
coupling ring shall be hard anodized, color black. Connectors have uorosilicone insert and
grommet material. Consult factory for availability.
Class S Passivated Stainless steel shells and coupling ring with uorosilicone insert and
grommet material. The shell has a ground spring. Consult factory for availability.
Class W Cadmium, with olive drab chromate conversion over electroless nickel plated
aluminum shell with uorosilicone insert and grommet material. The shell has a ground
spring. The coupling ring shall be hard anodized, color black. Consult factory for availability.
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24, 28
Series Designation Connector, Plug, Bayonet Coupling, Vibration Resistant
Boeing Part Number (Reference)
BACC63CB 10 - 5 P N H
Blank - With Contacts and Seal Plugs
H - Without Contacts and Seal Plugs
Shell Keyway Position N, 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
“-” - Cadmium Plated Aluminum
A - Anodized Aluminum
B - Passivated Stainless Steel
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24, 28
Series Designation Connector, Electrical, Plug, Straight, Bayonet Coupling, Vibration Resistant
Consult Factory for
Other Options
20
R0700, R0712/R0701 Series
ultimately wearing completely out. In
addition to this hinge pivot wear, extreme
mechanical wear was also seen to occur at
the pivotal points between the connectors
(See Figure 3). Electromechanical reliability
rapidly degraded as a result, and useful life
was shortened dramatically.
rms engineers then reasoned that a rigid
bar should be able to eliminate the hinge
and pivotal wear. In addition, clamping the
two mated connectors together – so they
act as one rigid unit – should result in the
elimination of the pivotal wear stemming
from vibration. They created the R0700 and
R0712 Series.
The R0700, R0712/R0701 Series
The R0700 and R0712 coupling rings were
designed without a detent at the end of the
ramp to provide a full static-locking force.
As a result, when the bayonet is advanced
to the end of the ramp during coupling,
the detent rollers simultaneously drop into
detents in a separate spring-loaded detent
ring, locking the bayonets in place. This ring
was also keyed to the coupling ring (See
Figure 4).
Until the R0700, R0712 and R0701 Series,
any severe vibration caused early failure
in connectors, especially bayonet coupling
types. The R0700 and R0712 Series,
however, put an end to wear and controlled
the relative motion between plug and
receptacle.
Engineering Analysis
First, a detailed analysis on failure-prone
connectors revealed that a “vibration
envelope” induced forces on the connector.
It was this “envelope” that resulted in wear
and produced the relative motion between
the plug and its mating receptacle.
Further study disclosed that this relative
motion stemmed from the unloading eect
on the clamping force when the bayonet
dropped into its detent in the coupling ring
ramp (See Figure 1).
Next, an examination of the vibration
that caused connector failures indicated
that the transmittal path was through the
mounted receptacle into the mated plug
(similar to the pivoting of a free half of
hinge, as in Figure 2). When the vibration
occurred, wear began at the hinge pivot,
Test Data
(Vibration)
R0700 R0712 R0701
Not Shown Actual Size
21
(Continued On Next Page)
Test Data
(Vibration)
Most important, the rms R0700 and R0712
withstands vibration and shock equivalent
to the capability of thread-coupled
connectors locked up metal-to-metal.
Materials
Materials used in the connectors are as
specied in MIL-DTL-26500.
Finishes
Component nish and identication
marking is in accordance with applicable
requirements of MIL-DTL-26500 and tables.
Quality Assurance Provision
Mechanical, electrical and environmental
performance complies with requirements
of MIL-DTL-26500 for Type B, Class R
connector plugs except as noted. Final
acceptance of connector conforms to the
“Quality Conformance Inspection” section
of MIL-DTL-26500 except as noted.
*For specic intermatability information
consult factory.
The locking mechanism itself (Figure 5) is
retained by the retainer (A). This ring is
adjusted and locked at nal assembly to
tune out all manufacturing tolerances. This
procedure applies a predetermined locking
force (pre-load) through a special pre-
load member (B), and around the detent
locking mechanism (C) directly against the
bottoming ange (D) of the connector.
The result: a connector with maximum
pre-load locking force that prevents
unintentional loosening. In short, a
vibration proof connector.
An R0700 and R0712 Series bayonet
coupling connector acts like two connectors
clamped together, or a threaded connector
coupling mechanism (fully threaded) that
provided a clamping pre-load and lock
wired condition. The new design was the
answer sought by users for a bayonet
coupling convenience with screw type
coupling rigidity. Plus, the R0700 and R0712
extended connector life over traditional
models, cutting primary servicing time
and costs. Downtime of equipment was
drastically reduced.
rms R0700 and R0712 Series
Connectors also:
Mate with standard R0701, MIL-
DTL-26500 and MIL-DTL-83723*
bayonet receptacles presently used on
aircraft.
Use standard contacts, crimping,
insertion, and removal tools.
D
B
A
C
Fig. 5
Static
Locking
Pre-Load
Maximum
Clamping
Force
Design Features
A. Retainer
B. Preload Spring
C. Spacer
D. Detent Spring
E. Detent Ring
F. Roller Feature
22
Test Data
(Vibration)
About the Power Spectral
Density Test Curve and the
R0700, R0712/R701 Series
The curve depicted represents a
practical compromise between projected
accelerated life tests (based on realistic
operational aircraft vibration frequencies)
and amplitudes elevated to practical test
equipment capability levels. This means
that the “time in test” factor can be adjusted
to project operational life expectancy on
any application where dynamic data has
been established.
rms R0700 and R0701 connector
test samples subjected to this test
curve showed no evidence of wear or
deterioration after vibrating for the hours
specied (Total: 48 hours). Conventional
connectors had worn out and failed at
about 12 percent (4 hours) of the required
test time.
rms R0712 connector test samples
subjected to this test curve showed no
evidence of wear or deterioration after
vibrating for the number of hours specied
(Total: 16 hours). Conventional connectors
had worn out and failed at about 25
percent (4 hours) of the required test time.
Testing
The test specimens were subjected to
the random vibration motion specied in
the gure on this page. Duration of the
vibration was eight (8) hours in each of two
mutually perpendicular axis, one of which
was the major axis of the connector. For
the R0700 series, three cycles of vibration
were performed. A test current of 100ma
was applied throughout the duration of
the test. The maximum allowable current
interruption (discontinuities) was one
microsecond.
Acceptance
The connectors remained coupled
throughout the test and exhibited
no discontinuity greater than one
microsecond. Visual examination revealed
no wear of the normal mating surface as
a result of the vibration (coupling rings,
detents, keys, keyways, and bottoming
contact surfaces).
Mounting
The plug connector was mated to a
corresponding receptacle which was
mounted by its normal mounting means
to a suitable vibration xture. The mated
pair was wired in a manner that allowed a
test current of 100ma in each contact. The
resulting wire bundle was then clamped to
the test table at a distance of 6 ± 1 inches
from the rear of the wire sealing grommet.
The connector plug was equipped with a
cable clamp.
R0700, R0712/R0701 Series Continued
23
R0710 Series
Threaded Plug
Self-Locking
The R0710 Series of connectors
meets the performance requirements of
MIL-DTL-26500 Type T connectors.
3. The plug connector includes self-
locking coupling features to eliminate
the need for safety wires.
4. The grommets are manufactured
using a high-grade uorosilicone
elastomer material which increases
the resistance to various oils and fuels.
5. The rear end geometry has been
modied to accept non-rotatable rear
hardware with accessory teeth per
MS3155.
6. The connectors have design features
that greatly improve the vibration
resistance. (See Vibration Test Data.)
7. The plug connector coupling ring is
attached to the shell by means of an
rms patented fail-safe mechanism.
The R0710 Series Connectors
The R0710 Series is a plug with thread-type
coupling designed to intermate with the
R0711 Series receptacle as well as MIL-
DTL-26500 Type T, Class R connectors and
other connectors with proprietary part
numbers.
In addition to meeting the requirements of
MIL-DTL-26500 Type T, Class R connectors, the
following special features have been designed
into the connectors to improve performance
and user convenience:
1. Metal shell materials include
aluminum, with a variety of conductive
and non-conductive nishes, and
stainless steel for extremely harsh
environments.
2. Plug connectors are available with or
without ground springs.
Dimensions
Master Key
Not Shown Actual Size
(Continued On Next Page)
24
Shell Styles
R0710XXXXXXX
Shell Polarity
Polarity
For Connectors
Size 8 and 10
For Connectors Size
12, 14, 16, 18, 20, 22, 24 and 28
A B C D A B C D
Normal 105° 140° 215° 265° 105° 140° 215° 265°
6 102° 132° 248° 320° 18° 149° 192° 259°
7 80° 118° 230° 312° 92° 152° 222° 342°
8 35° 140° 205° 275° 84° 152° 204° 334°
9 64° 155° 234° 304° 24° 135° 199° 240°
10* 25° 115° 220° 270° 98° 152° 268° 338°
* Not Available in Size 8 Connector
Shell Size E Dia. Max. F Dia. Max. G Dia. Max. H Thread
8 .328 .500 .821 1/2-20 UNF-2A
10 .420 .625 .972 5/8-24 UNEF-2A
12 .580 .750 1.080 3/4-20 UNEF-2A
14 .664 .875 1.230 7/8-20 UNEF-2A
16 .769 1.000 1.355 1-20 UNEF-2A
18 .902 1.062 1.470 1 1/16-18 UNEF-2A
20 1.033 1.187 1.607 1 3/16-18 UNEF-2A
22 1.152 1.312 1.735 1 5/16-18 UNEF-2A
24 1.282 1.437 1.858 1 7/16-18 UNEF-2A
28 1.500 1.750 2.113 1 3/4-18 UNS-2A
Consult Factory for
Other Options
How to Order
Boeing Part Number (Reference)
BACC63BP 10 H 5 P N H
Blank - With Contacts and Seal Plugs
H - Without Contacts and Seal Plugs
Shell Keyway Position N, 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
C - Cadmium plated aluminum with rear accessory teeth per MS3155 and a
ground spring
D - Stainless steel with rear accessory teeth per MS3155 and a ground spring
H - Anodized aluminum with rear accessory teeth per MS3155
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24, 28
Series Designation Connector, Electrical, Plug, Straight, Threaded Coupling, Self-locking
(For rms part number details, see next page)
R0710 Series Continued
25
The R0710 Series connectors meet the
performance requirements of MIL-
DTL-2650 Class R, Type T; MS24266 Type T;
and Boeing Standard BACC63BP.
The connector is thread coupled with
rear insertion, front release contacts. The
connector can be ordered either with
or without gold plated contacts by using
the order code associated with the rms
number.
For contact, seal plug, and tooling
information see page 4.
How to Order
rms Catalog Number
R0710 10 H 05 P N - 0 00
00 - Less Cable Clamp
01 - With Right Angle Cable Clamp
02 - With Straight Cable Clamp
0 - Less Contacts
2 - With Gold Plated Boeing Contacts
Shell Keyway Position N, 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
Class A Hard anodized aluminum shell and coupling ring, color black with uorosilicone
insert and grommet material. Qualied to BACC63BP for those insert arrangements that have
no size 20 contacts.
Class B Passivated stainless steel shell and coupling ring with uorosilicone insert and
grommet material. Qualied to BACC63BP for those insert arrangements that have no
size 20 contacts.
Class C Cadmium with clear chromate conversion over electroless nickel plated aluminum
shell with uorosilicone insert and grommet material. The shell has a ground spring. The
coupling ring shall be hard anodized, color black. Qualied to BACC63BP for those insert
arrangements that have no size 20 contacts.
Class D Passivated stainless steel shell and coupling ring with uorosilicone insert and
grommet material. The shell has a ground spring. Qualied to BACC63BP for those insert
arrangements that have no size 20 contacts.
Class E Hard anodized aluminum shell and coupling ring, color black. Connectors have
uorosilicone insert and grommet material. Socket style connectors have a hard face socket
insert. Qualied to BACC63BP for those insert arrangements that have size 20 contacts.
Class F Passivated stainless steel shell and coupling ring. Connectors have uorosilicone
insert and grommet material. Socket style connectors have a hard face socket insert.
Qualied to BACC63BP for those insert arrangements that have size 20 contacts.
Class G Cadmium with clear chromate conversion over electroless nickel plated aluminum
shell. The shell has a ground spring. The coupling ring shall be hard anodized, color black.
Connectors have uorosilicone insert and grommet material. Qualied to BACC63BP for
those insert arrangements that have size 20 contacts.
Class H Passivated stainless steel shell and coupling ring. The shell has a ground spring.
Connectors have uorosilicone insert and grommet material. Qualied to BACC63BP for
those insert arrangements that have size 20 contacts.
Class J Cadmium with clear chromate conversion over electroless nickel plated aluminum
shell. The shell has a ground spring. The coupling ring shall be hard anodized, color black.
Connectors have uorosilicone insert and EPDM grommet material. Temperature exposure
shall be 125° C max. Consult factory for availability.
Class L Hard anodized aluminum shell and coupling ring, color black. Connectors have
uorosilicone insert and EPDM grommet material. Temperature exposure shall be
125° C max. Consult factory for availability.
Class N Electroless nickel plated aluminum shell. The shell has a ground spring. The
coupling ring shall be hard anodized, color black. Connectors have uorosilicone insert and
grommet material. Consult factory for availability.
Class W Cadmium with olive drab chromate conversion over electroless nickel plated
aluminum shell with uorosilicone insert and grommet material. The shell has a ground
spring. The coupling ring shall be hard anodized, color black. Consult factory for availability.
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24, 28
Series Designation Connector, Plug, Threaded Coupling, Self-locking, Vibration Resistant
Consult Factory for
Other Options
26
Shell Polarity
Polarity
For Connectors
Size 8 and 10
For Connectors Size
12, 14, 16, 18, 20, 22, 24 and 28
A B C D A B C D
Normal 105° 140° 215° 265° 105° 140° 215° 265°
6 102° 132° 248° 320° 18° 149° 192° 259°
7 80° 118° 230° 312° 92° 152° 222° 342°
8 35° 140° 205° 275° 84° 152° 204° 334°
9 64° 155° 234° 304° 24° 135° 199° 240°
10* 25° 115° 220° 270° 98° 152° 268° 338°
* Not Available in Size 8 Connector
Shell
Size
E
.005
F
.005
G
Dia.
+.000
–.009
H
Dia.
Max.
J Dia.
Max.
K
Dia.
Max.
L
Thread
M
Dia.
Min.
N
Dia.
Min.
P
Thread
8 .812 .594 .125 .328 .500 .561 1/2-20 UNF-2A .620 .510 9/16-24 UNEF-2A
10 .937 .719 .125 .420 .625 .696 5/8-24 UNEF-2A .748 .635 11/16-24 UNEF-2A
12 1.031 .812 .125 .580 .750 .875 3/4-20 UNEF-2A .913 .760 7/8-20 UNEF-2A
14 1.125 .906 .125 .664 .875 .935 7/8-20 UNEF-2A .980 .885 15/16-20 UNEF-2A
16 1.250 .969 .125 .769 1.000 1.062 1-20 UNEF-2A 1.107 1.010 1 1/16-18 UNEF-2A
18 1.343 1.062 .125 .902 1.062 1.187 1 1/16-18 UNEF-2A 1.209 1.072 1 3/16-18 UNEF-2A
20 1.437 1.156 .125 1.033 1.182 1.312 1 3/16-18 UNEF-2A 1.337 1.192 1 5/16-18 UNEF-2A
22 1.562 1.250 .125 1.152 1.312 1.437 1 5/16-18 UNEF-2A 1.452 1.322 1 7/16-18 UNEF-2A
24 1.703 1.375 .154 1.282 1.432 1.562 1 7/16-18 UNEF-2A 1.577 1.442 1 9/16-18 UNEF-2A
28 2.000 1.562 .154 1.500 1.750 1.812 1 3/4-18 UNS-2A 1.827 1.760 1 13/16-16 UN-2A
R0711 Series
Threaded Receptacle
R0711XXXXXXX
Panel Mounting
Hole Cut-out
Dimensions
Master Key
Consult Factory for
Other Options
How to Order
Boeing Part Number (Reference)
BACC63BV 10 H 5 P N H
Blank - With Contacts and Seal Plugs
H - Without Contacts and Seal Plugs
Shell Keyway Position N, 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
B - Stainless with rear accessroty teeth per MS3155
F - Cadmium plated aluminum with rear accessroty teeth per MS3155
H - Anodized aluminum with rear accessory teeth per MS3155
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24, 28
Series Designation Connector, Electrical, Receptacle, Flange Mount,
Threaded Coupling, Vibration Resistant
(For rms part number details, see next page)
Not Shown Actual Size
27
The R0711 Series connectors meet
the performance requirements of MIL-
DTL-26500 Class R, Type T; MS24264, Type T;
and Boeing Standard BACC63BV.
The connector is thread coupled with
rear insertion, front release contacts. The
connector can be ordered either with or
without gold plated contacts by using the
order code associated with the rms number.
For contact, seal plug, and tooling
information see page 4.
How to Order
rms Catalog Number
R0711 10 H 05 P N - 0 00
00 - Less Cable Clamp
01 - With Right Angle Cable Clamp
02 - With Straight Cable Clamp
0 - Less Contacts
2 - With Gold Plated Boeing Contacts
Shell Keyway Position N, 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
Class A Hard anodized aluminum shell, color black with uorosilicone insert and grommet
material. Flange mount per MS24264. Qualied to BACC63BV for those insert arrangements
that have no size 20 contacts.
Class B Passivated stainless steel shell with uorosilicone insert and grommet material.
Flange mount per MS24264. Qualied to BACC63BV for those insert arrangements that
have no size 20 contacts.
Class E Electroless nickel plated stainless steel shell with uorosilicone insert and grommet
material. Flange mount per MS24264. Consult factory for availability.
Class F Cadmium with clear chromate conversion over electroless nickel plated aluminum
shell with uorosilicone insert and grommet material. Flange mount per MS24264. Qualied
to BACC63BV for those insert arrangements that have no size 20 contacts.
Class G Hard anodized aluminum shell, color black. Flange mount per MS24264. Connectors
have uorosilicone insert and grommet material. Socket style connectors have a hard face
socket insert. Qualied to BACC63BV for those insert arrangements that have size 20 contacts.
Class H Passivated stainless steel shell. Flange mount per MS24264. Connectors have
uorosilicone insert and grommet material. Socket style connectors have a hard face socket
insert. Qualied to BACC63BV for those insert arrangements that have size 20 contacts.
Class J Cadmium with clear chromate conversion over electroless nickel plated aluminum
shell. Flange mount per MS24264.Connectors have uorosilicone insert and grommet
material. Socket style connectors have a hard face socket insert. Qualied to BACC63BV for
those insert arrangements that have size 20 contacts.
Class M Cadmium with clear chromate conversion over electroless nickel plated aluminum
shell. Flange mount per MS24264. Connectors have uorosilicone insert and EPDM grommet
material. Consult factory for availability.
Class N Electroless nickel plated aluminum shell. Flange mount per MS24264. Connectors
have uorosilicone insert and grommet material. Consult factory for availability.
Class P Passivated stainless steel shell, shortened, less serrations with uorosilicone insert
and grommet material. Flange mount per MS24264. Consult factory for availability.
Class W Cadmium with olive drab chromate conversion over electroless nickel plated
aluminum shell with uorosilicone insert and grommet material. Flange mount per
MS24264. Consult factory for availability.
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24, 28
Series Designation Connector, Receptacle, Thread Coupling
Consult Factory for
Other Options
28
R0710/R0711 Series
Test Data
(Vibration)
About the Power Spectral
Density Test Curve and the
R0710/R0711 Series
The curve depicted represents a
practical compromise between projected
accelerated life tests (based on realistic
operational aircraft vibration frequencies)
and amplitudes elevated to practical test
equipment capability levels. This means
that “time in test” factor can be adjusted to
project operational life expectancy on any
application where dynamic data has been
established.
rms R0710 and R0711 connector
test samples subjected to this test
curve showed no evidence of wear or
deterioration after vibrating for the hours
specied (Total: 16 hours).
Testing
The test specimens were subjected to
the random vibration motion specied in
the gure on this page. Duration of the
vibration was eight (8) hours in each of
two mutually perpendicular axis, one of
which was the major axis of the connector.
A test current of 100ma was applied
throughout the duration of the test. The
maximum allowable current interruption
(discontinuities) was one microsecond.
Acceptance
The connectors remained coupled
throughout the test and exhibited
no discontinuity greater than one
microsecond. Visual examination revealed
no wear of the normal mating surface as
a result of the vibration (coupling rings,
detents, keys, keyways, and bottoming
contact surfaces).
Mounting
The plug connector was mated to a
corresponding receptacle which was
mounted by its normal mounting means
to a suitable vibration xture. The mated
pair was wired in a manner that allowed a
test current of 100ma in each contact. The
resulting wire bundle was then clamped to
the test table at a distance of 6 ± 1 inches
from the rear of the wire sealing grommet.
The connector plug was equipped with a
cable clamp.
29
R0712 Series
Bayonet Plug
R0712XXXXXXX
Shell Polarity
Polarity
For Connectors
Size 8 and 10
For Connectors Size
12, 14, 16, 18, 20, 22, and 24
A B C D A B C D
Normal 105° 140° 215° 265° 105° 140° 215° 265°
6 102° 132° 248° 320° 18° 149° 192° 259°
7 80° 118° 230° 312° 92° 152° 222° 342°
8 35° 140° 205° 275° 84° 152° 204° 334°
9 64° 155° 234° 304° 24° 135° 199° 240°
10* 25° 115° 220° 270° 98° 152° 268° 338°
* Not Available in Size 8 Connector
Shell Size E Dia.
Max.
F Dia.
Max. G Dia. Max. H
Thread
8 .328 .437 .766 7/16-28 UNEF-2A
10 .420 .562 .906 9/16-24 UNEF-2A
12 .580 .750 1.078 3/4-20 UNEF-2A
14 .664 .812 1.141 13/16-20 UNEF-2A
16 .769 .938 1.266 15/16-20 UNEF-2A
18 .902 1.062 1.375 1 1/16-18 UNEF-2A
20 1.033 1.182 1.510 1 3/16-18 UNEF-2A
22 1.152 1.312 1.625 1 5/16-18 UNEF-2A
24 1.282 1.432 1.760 1 7/16-18 UNEF-2A
Dimensions
Master Key
Not Shown Actual Size
(Continued On Next Page)
30
The R0712 Series connectors meet the
performance requirements of MIL-
DTL-26500 Class R, Type B; MS24266 Type
B; and Boeing standard BACC63BN.
The connector is bayonet coupled with
rear insertion, front release contacts. The
connector can be ordered either with
or without gold plated contacts by using
the order code associated with the rms
number.
For contact, seal plug, and tooling
information see page 4.
How to Order
rms Catalog Number
R0712 10 B 05 P N - 0 00
00 - Less Cable Clamp
01 - With Right Angle Cable Clamp
02 - With Straight Cable Clamp
0 - Less Contacts
2 - With Gold Plated Boeing Contacts
Shell Keyway Position N, 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
Class A Hard anodized aluminum shell and coupling ring, color black with uorosilicone
insert and grommet material. Qualied to BACC63BN for those insert arrangements that
have no size 20 contacts.
Class B Hard anodized aluminum shell and coupling ring, color black. Connectors have
uorosilicone insert and grommet material. Socket style connectors have a hard face socket
insert. Qualied to BACC63BN for those insert arrangements that have size 20 contacts.
Class N Electroless nickel plated aluminum shell. Coupling Ring shall be hard anodized,
color black with uorosilicone insert and grommet material. Consult factory for availability.
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24
Series Designation Connector, Plug, Bayonet Coupling, Vibration Resistant
Boeing Part Number (Reference)
BACC63BN 10 - 5 P N H
Blank - With Contacts and Seal Plugs
H - Without Contacts and Seal Plugs
Shell Keyway Position N, 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
“-” - Less Cable Clamp
B - Right Angle Cable Clamp
C - Straight Cable Clamp
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24
Series Designation Connector, Electrical, Plug, Straight,
Bayonet Coupling, Vibration Resistant
Consult Factory for
Other Options
R0712 Series Continued
31
R0708 Series
Flange Mount or
Single Hole Mount
Receptacles
Shell Polarity
Polarity
For Connectors
Size 8 and 10
For Connectors Size
12, 14, 16, 18, 20, 22 and 24
A B C D A B C D
Normal 105˚ 140˚ 215˚ 265˚ 105˚ 140˚ 215˚ 265˚
6 102˚ 132˚ 248˚ 320˚ 18˚ 149˚ 192˚ 259˚
7 80˚ 118˚ 230˚ 312˚ 92˚ 152˚ 222˚ 342˚
8 35˚ 140˚ 205˚ 275˚ 84˚ 152˚ 204˚ 334˚
9 64˚ 155˚ 234˚ 304˚ 24˚ 135˚ 199˚ 240˚
10* 25˚ 115˚ 220˚ 270˚ 98˚ 152˚ 268˚ 338˚
* Not Available in Size 8 Connector
Shell
Size
E
±.005
F
±.005
G Dia. /1
+.000
–.009
J Dia.
Max.
K Dia.
Max.
M Dia.
Min.
N Dia.
Min.
8 .812 .594 .125 .500 .561 .620 .510
10 .937 .719 .125 .620 .696 .748 .635
12 1.031 .812 .125 .750 .875 .913 .750
14 1.125 .906 .125 .871 .935 .980 .885
16 1.250 .969 .125 .996 1.062 1.107 1.010
18 1.343 1.062 .125 1.062 1.187 1.209 1.072
20 1.437 1.156 .125 1.184 1.312 1.337 1.192
22 1.562 1.250 .125 1.312 1.437 1.452 1.322
24 1.703 1.375 .154 1.432 1.562 1.577 1.442
1/ Unless Specied Otherwise by Part Number Conguration
The R0708 Series connectors are designed
for termination to printed circuit boards,
ex circuitry, or may be furnished with wire
wrap or solder pot contacts.
The mating interface is compatible with
MIL-DTL-26500 and MIL-DTL-83723/86,
/87, /91, /92, /95 & /96 Type T Connectors.
There are several mounting Flange
variations as well as contact termination
lengths as shown in the following gures.
Consult factory for availability.
Not Shown Actual Size
Panel Mounting for Standard Flange
Hole Cut-out
Dimensions
Master Key
(Continued On Next Page)
32
Flange Mount or
Single Hole Mount
Receptacles
Not Shown Actual Size
How to Order
rms Catalog Number
R0708 10 A 05 P N A 1 1 - A
Special Option Code (Only Marked if Applicable)
Termination Pin Length
Solder Pin (Flange Option 1)
1 - .260 ± .015
2 - .366 ± .020
Mounting Flange Variation
1 - Square Flange Mount, Standard Thru Holes (4).
2 - Square Flange Mount, Chamfered Thru Holes (4).
Contact Type
A - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry, Step Pin with .030 X .060 Long
B - Solder Cup
D - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry, .030 Contact Tail
E - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry, .024 Contact Tail with Solder Coat
F - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry, .030 Contact Tail with Solder Coat
G - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry, .019 Contact Tail with Solder Coat
Shell Keyway Position N, 6, 7, 8, 9 or 10
Contact Style “P” - Pin Contact, “S” - Socket Contact
Insert Arrangement See Page 5
Shell Finish
A - Hard Anodized Aluminum Shell
B - Stainless Steel Shell, Passivated
G - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion
H - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion with Resilient Contact Potting
N - Nickel Plated Aluminum Shell
W - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion
Z - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion without Dry Film Lubricant on Mating Thread
Shell Size 08, 10, 12, 14, 16, 18, 20, 22, 24
Series Designation Connector, Receptacle, Non-Removable Contact
– Consult Factory for Other Options –
(Continued On Next Page)
R0708 Series Continued
33
Flange Mount
Threaded Fasteners Pressed in Place
Receptacles
Threaded Fastener
.112-40UNJC-3B (4)
Not Shown Actual Size
How to Order
rms Catalog Number
R0708 10 A 05 P N A 7 1 - A
Special Option Code (Only Marked if Applicable)
Termination Pin Length
Solder Pin (Flange Option 7)
1 - .366 ± .015
Mounting Flange Variation
7 - Square Flange Mount, Threaded Fasteners Pressed in Place (4)
Contact Type
A - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry, Step Pin with .030 X .060 Long
B - Solder Cup
D - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry, .030 Contact Tail
E - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry, .024 Contact Tail with Solder Coat
F - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry, .030 Contact Tail with Solder Coat
G - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry, .019 Contact Tail with Solder Coat
Shell Keyway Position N, 6, 7, 8, 9 or 10
Contact Style “P” - Pin Contact, “S” - Socket Contact
Insert Arrangement See Page 5
Shell Finish
A - Hard Anodized Aluminum Shell
B - Stainless Steel Shell, Passivated
G - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion
H - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion with Resilient Contact Potting
N - Nickel Plated Aluminum Shell
W - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion
Z - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion without Dry Film Lubricant on Mating Thread
Shell Size 08, 10, 12, 14, 16, 18, 20, 22, 24
Series Designation Connector, Receptacle, Non-Removable Contact
– Consult Factory for Other Options –
34
R0709 Series
Flange Mount or
Single Hole Mount
Receptacles
Shell Polarity
Polarity
For Connectors
Size 8 and 10
For Connectors Size
12, 14, 16, 18, 20, 22 and 24
A B C D A B C D
Normal 105˚ 140˚ 215˚ 265˚ 105˚ 140˚ 215˚ 265˚
6 102˚ 132˚ 248˚ 320˚ 18˚ 149˚ 192˚ 259˚
7 80˚ 118˚ 230˚ 312˚ 92˚ 152˚ 222˚ 342˚
8 35˚ 140˚ 205˚ 275˚ 84˚ 152˚ 204˚ 334˚
9 64˚ 155˚ 234˚ 304˚ 24˚ 135˚ 199˚ 240˚
10* 25˚ 115˚ 220˚ 270˚ 98˚ 152˚ 268˚ 338˚
* Not Available in Size 8 Connector
Shell
Size
E
±.005
F
±.005
G Dia. /1
+.000
–.009
J Dia.
Max.
K Dia.
Max.
M Dia.
Min.
N Dia.
Min.
8 .812 .594 .125 .500 .561 .620 .510
10 .937 .719 .125 .620 .696 .748 .635
12 1.031 .812 .125 .750 .875 .913 .750
14 1.125 .906 .125 .871 .935 .980 .885
16 1.250 .969 .125 .996 1.062 1.107 1.010
18 1.343 1.062 .125 1.062 1.187 1.209 1.072
20 1.437 1.156 .125 1.184 1.312 1.337 1.192
22 1.562 1.250 .125 1.312 1.437 1.452 1.322
24 1.703 1.375 .154 1.432 1.562 1.577 1.442
1/ Unless Specied Otherwise by Part Number Conguration
Dimensions
Master Key
Panel Mounting for Standard Flange
Hole Cut-out
The R0709 Series connectors are designed
for termination to printed circuit boards,
ex circuitry, or may be furnished with
solder pin, wire wrap, compliant contact or
solder pot contacts.
The gold plated contacts are designed
for ease of maintenance with insertion
and removal accomplished through the
front side of the connector eliminating the
requirement to disassemble the entire
connector from its mounting. The mating
interface is compatible with MIL-DTL-26500
and MIL-DTL-83723/75, /76, /77, and /78
Type B Connectors. There are several
mounting Flange variations as well as
contact termination lengths as shown in
the following gures. Consult factory
for availability.
Not Shown Actual Size
35
(Continued On Next Page)
Flange Mount or
Single Hole Mount
Receptacles
Not Shown Actual Size
How to Order
rms Catalog Number
R0709 10 A 05 P N A 1 1
Termination Pin Length
Solder Pin (Type A & D) Wire Wrap (B) Compliant Pin (0)
Flange Options 1,2,5,6) (Flange Option 1) (Flange Option 0)
1-.255 ± .020 1 - .750 ± .020 1 - .323 ± .020
2-.935 ± .020
3-.526 ± .020
4-.365 ± .020
5-.965 ± .020
6-.396 ± .020
7-.436 ± .020
8-.978 ± .020 (No Solder Coat)
9-.557 ± .020
Mounting Flange Variation
0 - Square Flange Mount, Standard Thru Holes (4)
1 - Square Flange Mount, Standard Thru Holes (4)
2 - Square Flange Mount, Chamfered Thru Holes (4)
5 - Square Flange Mount, Standard Thru Holes (4), Flange Flush to Rear of Shell
6 - Square Flange Mount, ( .142)Thru Holes (4)
Contact Type
A - Solder Pin Termination
B - Wire Wrap Termination
C - Compliant Pin Termination with Solder Post
D - Solder Pin Termination - No Solder Coat
0 - Compliant Pin Termination with Solder Post
Shell Keyway Position N, 6, 7, 8, 9 or 10
Contact Style “P” - Pin Contact, “S” - Socket Contact
Insert Arrangement See Page 5
Shell Finish
A - Hard Anodized Aluminum Shell
G - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion
N - Nickel Plated Aluminum Shell
W - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion
Shell Size 08, 10, 12, 14, 16, 18, 20, 22, 24
Series Designation “Connector, Receptacle, Flange Mount, Front Insert, Front Removable Contacts”
– Consult Factory for Other Options –
36
How to Order
rms Catalog Number
R0709 10 A 05 P N A 4 1
Termination Pin Length
Solder Pin (A) Solder Pin (A) Compliant Pin (C)
(Flange Options 4,7,8,9 and J) (Flange Option L) (Flange Option M)
1 -.255 ± .020 6 - .524 ± .020 1 - .241 ± .020
2 -.365 ± .020
3 -.526 ± .020 Solder Pin (A) Compliant Pin (C)
4 -.935 ± .020 (Flange Option N) (Flange Option N)
5 -.297 ± .020 1 - .217 ± .020 1 - .235 ± .020
6 -.524 ± .020
Solder Pin (D)
(Flange Option J)
5 - .297 ± .020
Mounting Flange Variation
4 - Square Flange Mount, (.157 ± .005) Board Mounting Standos, .086-56UNC-2B
Threaded Inserts in Mounting Holes (4)
7 - Square Flange Mount, (.225 ± .005) Board Mounting Standos,
Threaded Inserts in Mounting Holes (4)
8 - Square Flange Mount, (.335 ± .005) Board Mounting Standos,
Threaded Inserts in Mounting Holes (4)
9 - Square Flange Mount, (.200 ± .005) Board Mounting Standos,
Threaded Inserts in Mounting Holes (4)
J- Square Flange Mount, (.200 ± .005) Board Mounting Standos, .112-40UNC-2B
Threaded Inserts in Mounting Holes (4)
L - Square Flange Mount, (.500 ± .005) Board Mounting Standos,
Threaded Inserts in Mounting Holes (4)
M - Square Flange Mount, (.125 ± .005) Board Mounting Standos with Rear Flange
Alignment Pin, Chamfered Thru Holes (4)
N - Square Flange Mount, (.200 ± .005) Board Mounting Standos with Rear Flange
Alignment Pin, .112-40UNC-2B Threaded Inserts in Mounting Holes (4)
Contact Type
A - Solder Pin Termination
B - Wire Wrap Termination
C - Compliant Pin Termination with Solder Post
D - Solder Pin Termination - No Solder Coat
0 - Compliant Pin Termination with Solder Post
Shell Keyway Position N, 6, 7, 8, 9 or 10
Contact Style “P” - Pin Contact, “S” - Socket Contact
Insert Arrangement See Page 5
Shell Finish
A - Hard Anodized Aluminum Shell
G - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion
N - Nickel Plated Aluminum Shell
W - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion
Shell Size 08, 10, 12, 14, 16, 18, 20, 22, 24
Series Designation “Connector, Receptacle, Flange Mount, Front Insert, Front Removable Contacts”
– Consult Factory for Other Options –
Flange Mount
Board Mounting Standos
Receptacles
Not Shown Actual Size
Stando with
Threaded Insert (4)
Shell Size Thread Size
8 - 14 .086-56UNC-2B
16 - 24 .112-40UNC-2B
Unless Otherwise Specied in Table
R0709 Series Continued
37
Single Hole Mount
Board Mounting Standos
Receptacles
Not Shown Actual Size
How to Order
rms Catalog Number
R0709 10 A 05 P N A H 1
Termination Pin Length
Solder Pin (A) Compliant Pin (C)
(Flange Option E, H and K) (Flange Option H)
1 - .159 + .020 1 - .190 ± .020
Compliant Pin (C) Solder Pin (D)
(Flange Option K) (Flange Option K)
1 - .173 ± .020 1 - .159 + .020
Mounting Flange Variation
E - Square Flange, Single Hole Mount (.150 ± .005) Board Mounting Standos,
(2) .112-40UNC-2B Threaded Inserts in Mounting Holes, (2) Thru Holes
H - Square Flange, Single Hole Mount (.150 ± .005) Board Mounting Standos,
(2) .112-40UNC-2B Threaded Inserts in Mounting Holes, (2) Thru Holes. Less
Grounding Washer, Friction Washer, and Hexagon Nut
K - Square Flange, Single Hole Mount - Less Thread (.200 ± .005) Board Mounting
Standos, .112-40UNC-2B Threaded Inserts in Mounting Holes (4). Less Grounding
Washer, Friction Washer and Hexagon Nut
Contact Type
A - Solder Pin Termination
B - Wire Wrap Termination
C - Compliant Pin Termination with Solder Post
D - Solder Pin Termination - No Solder Coat
0 - Compliant Pin Termination with Solder Post
Shell Keyway Position N, 6, 7, 8, 9 or 10
Contact Style “P” - Pin Contact, “S” - Socket Contact
Insert Arrangement See Page 5
Shell Finish
A - Hard Anodized Aluminum Shell
G - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion
N - Nickel Plated Aluminum Shell
W - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion
Shell Size 08, 10, 12, 14, 16, 18, 20, 22, 24
Series Designation “Connector, Receptacle, Flange Mount, Front Insert, Front Removable Contacts”
– Consult Factory for Other Options –
38
R0713 Series
The R0713 Series connectors are designed
for termination to printed circuit boards,
ex circuitry, or may be furnished with wire
wrap or solder pot contacts.
The mating interface is compatible with
MIL-DTL-26500 and MIL-DTL-83723/75, /76,
/77, & /78 Type B Connectors. There are
several mounting Flange variations as well
as contact termination lengths as shown
in the following gures. Consult factory for
availability.
Flange Mount or
Single Hole Mount
Receptacles
Shell Polarity
Polarity
For Connectors Size 8 and 10 For Connectors Size
12, 14, 16, 18, 20, 22 and 24
A B C D A B C D
Normal 105˚ 140˚ 215˚ 265˚ 105˚ 140˚ 215˚ 265˚
6 102˚ 132˚ 248˚ 320˚ 18˚ 149˚ 192˚ 259˚
7 80˚ 118˚ 230˚ 312˚ 92˚ 152˚ 222˚ 342˚
8 35˚ 140˚ 205˚ 275˚ 84˚ 152˚ 204˚ 334˚
9 64˚ 155˚ 234˚ 304˚ 24˚ 135˚ 199˚ 240˚
10* 25˚ 115˚ 220˚ 270˚ 98˚ 152˚ 268˚ 338˚
* Not Available in Size 8 Connector
Shell
Size
E
± .005
F
± .005
G Dia. 1/
+ .000
- .009
J Dia.
Max.
K Dia.
Max.
M Dia.
Min.
N Dia.
Min.
8 .812 .594 .125 .500 .561 .620 .510
10 .937 .719 .125 .620 .696 .748 .635
12 1.031 .812 .125 .750 .875 .913 .750
14 1.125 .906 .125 .871 .935 .980 .885
16 1.250 .969 .125 .996 1.062 1.107 1.010
18 1.343 1.062 .125 1.062 1.187 1.209 1.072
20 1.437 1.156 .125 1.184 1.312 1.337 1.192
22 1.562 1.250 .125 1.312 1.437 1.452 1.322
24 1.703 1.375 .154 1.432 1.562 1.577 1.442
1/ Unless Specied Otherwise by Part Number Conguration
Panel Mounting
Hole Cut-out
Not Shown Actual Size
39
Flange Mount or
Single Hole Mount
Receptacles
How to Order
rms Catalog Number
R0713 10 A 05 P N A 1 1 - A
Special Option Code (Only Marked if Applicable)
Termination Pin Length
Solder Pin (Type A & D) Solder Cup (Type B) Wire Wrap (Type C)
1 - .205 ± .020 1 - .185 ± .020 1 - .270 ± .020
2 - .255 ± .020 2 - .815 ± .020
3 - .575 ± .020
4 - .935 ± .020 Solder Pin (Type E) Solder Pin (Type F)
5 - .505 ± .020 2 - .260 ± .020 1 - .159 ± .020
6 - .390 ± .020 2 - .225 ± .020
7 - .100 ± .010
8 - .300 ± .020
9 - .735 ± .020
Mounting Flange Variation
1 - Square Flange Mount, Standard Thru Holes (4).
2 - Square Flange Mount, Chamfered Thru Holes (4).
3 - Single Hole Mount with Jam Nut - Consult Factory.
5 - Square Flange Mount, Standard Thru Holes (4).
Flange Flush to Rear of Shell - Consult Factory.
6 - Square Flange Mount, ( .142) Thru Holes (4).
8 - Flange Mount with External Key - Consult Factory
H - Square Flange, Single Hole Mount, (2) Threaded Mounting Holes,
(2) Thru Holes. (.150 + .005 Standos) - Consult Factory.
Contact Type
A - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry
B - Solder Cup
C - Wire Wrap Square Tail
D - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry
E - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry, Step Pin with .030 x .060 Long
F - Solder Pin (Size 12 Contacts Only) for Use with Printed Circuit Boards or Flex Circuitry with Solder Coat
G - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry with Special Contact Placement - Consult Factory
H - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry less Solder Coat
K - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry with Solder Coat
Shell Keyway Position N, 6, 7, 8, 9 or 10
Contact Style “P” - Pin Contact, “S” - Socket Contact
Insert Arrangement See Page 5
Shell Finish
A - Hard Anodized Aluminum Shell
F - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion with Resilient Contact Potting
G - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion
H - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion with Resilient Contact Potting
N - Nickel Plated Aluminum Shell
W - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion
Shell Size 08, 10, 12, 14, 16, 18, 20, 22, 24
Series Designation Connector, Receptacle, Non-Removable Contact
– Consult Factory for Other Options –
Not Shown Actual Size
(Continued On Next Page)
40
Flange Mount
Threaded Mounting Holes
Receptacles
How to Order
rms Catalog Number
R0713 10 A 05 P N A 4 1 - A
Special Option Code (Only Marked if Applicable)
Termination Pin Length
(Determined by Stand-O Height - Consult Factory)
Mounting Flange Variation
4 - Square Flange Mount, Threaded Mounting Holes (4).
(Standard Height = .157” STD, Consult Factory for Other Options)
K - Square Flange Mount, Threaded Mounting Holes (4).
(.200 + .005 Standos) with Rear Flange Alignment Pins
Contact Type
A - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry
B - Solder Cup
H - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry
Shell Keyway Position N, 6, 7, 8, 9 or 10
Contact Style “P” - Pin Contact, “S” - Socket Contact
Insert Arrangement See Page 5
Shell Finish
A - Hard Anodized Aluminum Shell
F - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion with Resilient Contact Potting
G - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion
H - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion with Resilient Contact Potting
N - Nickel Plated Aluminum Shell
W - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion
Shell Size 08, 10, 12, 14, 16, 18, 20, 22, 24
Series Designation Connector, Receptacle, Non-Removable Contact
– Consult Factory for Other Options –
Not Shown Actual Size
Stand-o with
Threaded Insert (4)
Shell Size Thread Size
8 - 14 .086-56UNC-2B
16 - 24 .112-40UNC-2B
Unless Otherwise Specied in Table
R0713 Series Continued
41
Flange Mount
Threaded Fasteners Pressed in Place
Receptacles
How to Order
rms Catalog Number
R0713 10 A 05 P N A 7 1 - A
Special Option Code (Only Marked if Applicable)
Termination Pin Length
1 - .205 ± .020
2 - .255 ± .020
3 - .575 ± .020
4 - .935 ± .020
5 - .505 ± .020
6 - .390 ± .020
7 - .100 ± .010
8 - .300 ± .020
9 - .735 ± .020
Mounting Flange Variation
7 - Square Flange Mount, Threaded Fasteners Pressed in Place (4).
Contact Type
A & D - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry
K - Solder Pin for Use with Printed Circuit Boards or Flex Circuitry with Solder Coat
Shell Keyway Position N, 6, 7, 8, 9 or 10
Contact Style “P” - Pin Contact, “S” - Socket Contact
Insert Arrangement See Page 5
Shell Finish
A - Hard Anodized Aluminum Shell
F - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion with Resilient Contact Potting
G - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion
H - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion with Resilient Contact Potting
N - Nickel Plated Aluminum Shell
W - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion
Shell Size 08, 10, 12, 14, 16, 18, 20, 22, 24
Series Designation Connector, Receptacle, Non-Removable Contact
– Consult Factory for Other Options –
Threaded Fastener
.112-40UNJC-3B (4)
Not Shown Actual Size
42
Flange Mount
Receptacles
The R0714 Series connectors are designed
for termination to printed circuit boards,
ex circuitry, or may be furnished with
solder pin contacts.
The gold plated contacts are designed
for ease of maintenance with insertion
and removal accomplished through the
front side of the connector eliminating the
requirement to disassemble the entire
connector from its mounting. The mating
interface is compatible with MIL-DTL-26500
and MIL-DTL-83723/75, /76, /77, & /78
Type B Connectors. There are several
mounting Flange variations as well as
contact termination lengths as shown in
the following gures. Consult factory for
availability.
Shell Polarity
Polarity
For Connectors Size 8 and 10 For Connectors Size
12, 14, 16, 18, 20, 22 and 24
A B C D A B C D
Normal 105˚ 140˚ 215˚ 265˚ 105˚ 140˚ 215˚ 265˚
6 102˚ 132˚ 248˚ 320˚ 18˚ 149˚ 192˚ 259˚
7 80˚ 118˚ 230˚ 312˚ 92˚ 152˚ 222˚ 342˚
8 35˚ 140˚ 205˚ 275˚ 84˚ 152˚ 204˚ 334˚
9 64˚ 155˚ 234˚ 304˚ 24˚ 135˚ 199˚ 240˚
10* 25˚ 115˚ 220˚ 270˚ 98˚ 152˚ 268˚ 338˚
* Not Available in Size 8 Connector
Shell Size E
± .005
F
± .005
G Dia. 1/
+ .000
- .009
K Dia.
Max.
M Dia.
Min.
N Dia.
Min.
8 .812 .594 .125 .561 .620 .510
10 .937 .719 .125 .696 .748 .635
12 1.031 .812 .125 .875 .913 .750
14 1.125 .906 .125 .935 .980 .885
16 1.250 .969 .125 1.062 1.107 1.010
18 1.343 1.062 .125 1.187 1.209 1.072
20 1.437 1.156 .125 1.312 1.337 1.192
22 1.562 1.250 .125 1.437 1.452 1.322
24 1.703 1.375 .154 1.562 1.577 1.442
1/ Unless Specied Otherwise by Part Number Conguration
Dimensions
Master Key
Panel Mounting for Standard Flange
Hole Cut-out
Not Shown Actual Size
R0714 Series
43
Flange Mount
Receptacles
How to Order
rms Catalog Number
R0714 10 A 05 P N A 3 1 - A
Special Option Code (Only Marked if Applicable)
Termination Pin Length
1 - .125 ± .020
Mounting Flange Variation
1 - Single Hole Mount with Jam Nut - Consult Factory
3 - Square Flange Mount, Standard Thru Holes
Contact Type
A - Solder Pin Termination for Use with Printed Circuit Boards or Flex Circuitry - No Solder Coat
B - Solder Pin Termination for Use with Printed Circuit Boards or Flex Circuitry - with Solder Coat
Shell Keyway Position N, 6, 7, 8, 9 or 10
Contact Style “P” - Pin Contact, “S” - Socket Contact
Insert Arrangement See Page 5
Shell Finish
A - Hard Anodized Aluminum Shell
B - Hard Anodized Aluminum Shell with Mounting Tabs, Chemical Film Coated
G - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion
N - Nickel Plated Aluminum Shell
W - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion
Shell Size 08, 10, 12, 14, 16, 18, 20, 22, 24
Series Designation Connector, Receptacle, Non-Removable Contact
– Consult Factory for Other Options –
.112-40UNC-2B (2)
Not Shown Actual Size
44
R0715 Series
Square Flange
Bayonet or Threaded Receptacle
Receptacles
Shell Polarity
Polarity
For Connectors Size 8 and 10 For Connectors Size
12, 14, 16, 18, 20, 22, and 24
A B C D A B C D
Normal 105° 140° 215° 265° 105° 140° 215° 265°
6 102° 132° 248° 320° 18° 149° 192° 259°
7 80° 118° 230° 312° 92° 152° 222° 342°
8 35° 140° 205° 275° 84° 152° 204° 334°
9 64° 155° 234° 304° 24° 135° 199° 240°
10* 25° 115° 220° 270° 98° 152° 268° 338°
* Not available in size 8 connector
Shell
Size
E
±.005
F
±.005
G Dia.
+.000
-.009
H
Dia.
Max.
J Dia.
+.003
-.000
K
Thread
L
Dia
Min.
M
Dia.
Min.
8 .812 .594 .125 .561 .495 9/16-24 UNEF-2A .510 .620
10 .937 .719 .125 .696 .620 11/16-24 UNEF-2A .635 .748
12 1.031 .812 .125 .875 .743 7/8-20 UNEF-2A .750 .913
14 1.125 .906 .125 .935 .869 15/16-20 UNEF-2A .885 .980
16 1.250 .969 .125 1.062 .993 1 1/16-18 UNEF-2A 1.010 1.107
18 1.343 1.062 .125 1.187 1.056 1 3/16-18 UNEF-2A 1.072 1.209
20 1.437 1.156 .125 1.312 1.182 1 5/16-18 UNEF-2A 1.192 1.337
22 1.562 1.250 .125 1.437 1.305 1 7/16-18 UNEF-2A 1.322 1.452
24 1.703 1.375 .154 1.562 1.430 1 9/16-18 UNEF-2A 1.442 1.577
Not Shown Actual Size
Dimensions
Master Key
45
Square Flange
Bayonet or Threaded Receptacle
Receptacles
How to Order
rms Catalog Number
R0715 10 A B C 05 P N - 0
0 - Less Contacts
2 - With Gold Plated Contacts
Shell Keyway Position N, 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
Mounting Flange Thickness
C - .069 ± .003
D - .100 ± .005
Coupling Style
B - Bayonet Coupling
T - Threaded Coupling
Class A Hard anodized aluminum shell, color black.
Class G Cadmium with clear chromate conversion over electroless nickel plated aluminum shell.
Class N Electroless nickel plated aluminum shell.
Class W Cadmium with olive drab chromate conversion over electroless nickel plated aluminum shell.
Class S Passivated stainless steel shell.
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24
Series Designation Connector, Receptacle, Special Flange Mount
Consult Factory for
Other Options
The R0715 Series connectors are used in
areas where space within an electrical box
or device is limited. The ange has been
moved to the rear. There are no provisions
for rear accessory hardware.
The connectors meet the performance
requirements of MIL-DTL-26500 Type B or
T, Class R. They are designed to mate with
standard MIL-DTL-26500 connectors or
derivatives of MIL-DTL-26500.
Panel Mounting
Hole Cut-out
46
R0726 Series
Threaded Plug
Self-locking
R0726XXXXXXX
Shell Polarity
Polarity
For Connectors Size 8 and 10 For Connectors Size
12, 14, 16, 18, 20, 22, 24 and 28
A B C D A B C D
Normal 105° 140° 215° 265° 105° 140° 215° 265°
6 102° 132° 248° 320° 18° 149° 192° 259°
7 80° 118° 230° 312° 92° 152° 222° 342°
8 35° 140° 205° 275° 84° 152° 204° 334°
9 64° 155° 234° 304° 24° 135° 199° 240°
10* 25° 115° 220° 270° 98° 152° 268° 338°
* Not available in size 8 connector
Shell
Size
E
Dia. Max.
F
Dia. Max.
G Dia. Max. H
Thread
Class A, C, W Class B
8 .311 .500 .837 .821 1/2-20UNF-2A
10 .376 .625 .972 .972 5/8-24UNEF-2A
12 .552 .750 1.080 1.080 3/4-20UNEF-2A
14 .618 .875 1.230 1.230 7/8-20UNEF-2A
16 .763 1.000 1.355 1.355 1-20UNEF-2A
18 .870 1.062 1.470 1.470 1 1/16-18UNEF-2A
20 .991 1.187 1.067 1.607 1 3/16-18UNEF-2A
22 1.111 1.312 1.735 1.735 1 5/16-18UNEF-2A
24 1.240 1.437 1.858 1.858 1 7/16-18UNEF-2A
28 1.490 1.748 2.113 2.113 1 3/4-18UNS-2A
Not Shown Actual Size
Dimensions
Master Key
47
How to Order
rms Catalog Number
R0726 10 A 05 P N - 0 00
00 - Less Cable Clamp
01 - With Right Angle Cable Clamp
02 - With Straight Cable Clamp
0 - Less Contacts
2 - With Gold Plated Contacts
Shell Keyway Position N, 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
Class A Hard anodized aluminum shell and coupling ring, color black. Connectors have
uorosilicone insert and EPDM grommet material. Socket style connectors have a hard face
socket insert. Qualied to BACC63DY. Temperature exposure shall be 125° C maximum.
Class B Passivated stainless steel shell and coupling ring. The shell has a ground spring.
Connectors have uorosilicone insert and EPDM grommet material. Socket style connectors
have a hard face socket insert. Qualied to BACC63DY. Temperature exposure shall be
125° C maximum.
Class C Cadmium with clear chromate conversion over electroless nickel plated aluminum shell.
The shell has a ground spring. The coupling ring shall be hard anodized, color black. Connectors
have uorosilicone insert and EPDM grommet material. Socket style connectors have a hard
face socket insert. Qualied to BACC63DY. Temperature exposure shall be 125° C maximum.
Class W Cadmium with olive drab chromate conversion over electroless nickel plated
aluminum shell. The shell has a ground spring. The coupling ring shall be hard anodized, color
black. Connectors have uorosilicone insert and EPDM grommet material. Socket style
connectors have a hard face socket insert. Temperature exposure shall be 125° C maximum.
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24, 28
Series Designation Connector, Plug, Threaded Coupling, Self-locking, Vibration and Skydrol Resistant
Boeing Part Number (Reference)
BACC63DY 10 A 5 P N H
Blank - With Contacts and Seal Plugs
H - Without Contacts and Seal Plugs
Shell Keyway Position N, 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
A - Anodized aluminum with rear accessory teeth per MS3155
B - Stainless steel with rear accessory teeth per MS3155 and grounding spring
C - Cadmium plated aluminum with rear accessory teeth per MS3155 and grounding spring
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24, 28
Series Designation Plug, Threaded Coupling, Self-locking, Vibration and Skydrol Resistant
Consult Factory for
Other Options
The R0726 Series connectors meet
the performance requirements of
MIL-DTL-2650 Class R, Type T; MS24266
Type T; and Boeing Standard BACC63DY.
The connector is thread coupled with
rear insertion, front release contacts.
The connector can be ordered either
with or without gold plated contacts by
using the order code associated with the
rms number.
For contact, seal plug, and tooling
information see page 4.
Threaded Plug
Self-locking
R0726XXXXXXX
48
R0727 Series
Threaded Receptacle
R0727XXXXXXX
Shell Polarity
Polarity
For Connectors Size 8 and 10 For Connectors Size
12, 14, 16, 18, 20, 22, 24 and 28
A B C D A B C D
Normal 105° 140° 215° 265° 105° 140° 215° 265°
6 102° 132° 248° 320° 18° 149° 192° 259°
7 80° 118° 230° 312° 92° 152° 222° 342°
8 35° 140° 205° 275° 84° 152° 204° 334°
9 64° 155° 234° 304° 24° 135° 199° 240°
10* 25° 115° 220° 270° 98° 152° 268° 338°
* Not available in size 8 connector
Shell
Size
E
±.005
F
±.005
G Dia.
+.000
-.009
H
Dia.
Max.
J
Dia.
Max.
K
Dia.
Max.
L
Thread
M
Dia.
Min.
N
Dia.
Min.
P
Thread
8 .812 .594 .125 .311 .500 .561 1/2-20UNF-2A .620 .510 9/16-24UNEF-2A
10 .937 .719 .125 .376 .625 .696 5/8-24UNEF-2A .748 .635 11/16-24UNEF-2A
12 1.031 .812 .125 .552 .750 .875 3/4-20UNEF-2A .913 .760 7/8-20UNEF-2A
14 1.125 .906 .125 .618 .875 .935 7/8-20UNEF-2A .980 .885 15/16-20UNEF-2A
16 1.250 .969 .125 .763 1.000 1.062 1-20UNEF-2A 1.107 1.010 1 1/16-18UNEF-2A
18 1.343 1.062 .125 .870 1.062 1.187 1 1/16-18UNEF-2A 1.209 1.072 1 3/16-18UNEF-2A
20 1.437 1.156 .125 .991 1.187 1.312 1 3/16-18UNEF-2A 1.337 1.192 1 5/16-18UNEF-2A
22 1.562 1.250 .125 1.111 1.312 1.437 1 5/16-18UNEF-2A 1.452 1.322 1 7/16-18UNEF-2A
24 1.703 1.375 .154 1.240 1.437 1.562 1 7/16-18UNEF-2A 1.577 1.442 1 9/16-18UNEF-2A
28 2.000 1.562 .154 1.490 1.750 1.812 1 3/4-18UNS-2A 1.827 1.760 1 13/16-16UN-2A
Not Shown Actual Size
Panel Mounting
Hole Cut-out
Dimensions
Master Key
4949
How to Order
rms Catalog Number
R0727 10 A 05 P N - 0 00
00 - Less Cable Clamp
01 - With Right Angle Cable Clamp
02 - With Straight Cable Clamp
0 - Less Contacts
2 - With Gold Plated Contacts
Shell Keyway Position N, 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
Class A Hard anodized aluminum shell, color black. Flange mount per MS24264. Connectors
have uorosilicone insert and EPDM grommet material. Socket style connectors have a hard face
socket insert. Qualied to BACC63BVDW. Temperature exposure shall be 125° C maximum.
Class B Passivated stainless steel shell. Flange mount per MS24264. Connectors have
uorosilicone insert and EPDM grommet material. Socket style connectors have a hard face
socket insert. Qualied to BACC63DW. Temperature exposure shall be 125° C maximum.
Class C Cadmium with clear chromate conversion over electroless nickel plated aluminum
shell. Flange mount per MS24264. Connectors have uorosilicone insert and EPDM grommet
material. Socket style connectors have a hard face socket insert. Qualied to BACC63DW.
Temperature exposure shall be 125° C maximum.
Class W Cadmium with olive drab chromate conversion over electroless nickel plated aluminum
shell. Flange mount per MS24264. Connectors have uorosilicone insert and EPDM grommet
material. Socket style connectors have a hard face socket insert. Temperature exposure shall
be 125° C maximum.
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24, 28
Series Designation Connector, Receptacle, Threaded Coupling, Vibration and Skydrol Resistant
Boeing Part Number (Reference)
BACC63DW 10 A 5 P N H
Blank - With Contacts and Seal Plugs
H - Without Contacts and Seal Plugs
Shell Keyway Position N, 6, 7, 8, 9, or 10
Contact Style
P - Pin Contact
S - Socket Contact
Insert Arrangement See Page 5
A - Anodized aluminum with rear accessory teeth per MS3155
B - Stainless steel with rear accessory teeth per MS3155
C - Cadmium plated aluminum with rear accessory teeth per MS3155
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24, 28
Series Designation Connector, Electrical, Receptacle, Flange Mount, Threaded Coupling,
Vibration and Skydrol Resistant
Consult Factory for
Other Options
The R0727 Series connectors meet
the performance requirements of
MIL-DTL-26500 Class R, Type T; MS24264,
Type T; and Boeing Standard BACC63DW.
The connector is thread coupled with
rear insertion, front release contacts.
The connector can be ordered either
with or without gold plated contacts by
using the order code associated with the
rms number.
For contact, seal plug, and tooling
information see page 4.
Threaded Receptacle
R0727XXXXXXX
50
General Information
Quality Assurance
rms’ Quality Program is sophisticated and
exacting; ISO 9001, AS9100, ISO 13485, FAA
approved and FDA registered, designed
to meet the most stringent needs of
the Connector industry. Our objective is
Zero Defects. From SPC to sophisticated
electrical testing equipment, you can be
assured that every connector you receive
from rms has been manufactured and
inspected to meet your standards…because
rst of all, they’ve met our standards.
Facilities
In early 1992, the company’s 25th
Anniversary year, rms moved to a newly
constructed 80,000 square foot state-
of-the-art facility which was designed
and equipped to meet the exacting
specications for the connector industry.
rms has continued to grow and today
occupies over 210,000 ft2 of manufacturing
space. We are constantly adopting the
latest technology and machining methods
available to stay ahead of the intricate
demands of the Aerospace industry.
World-Class Electrical
Connectors From rms
Located in Minneapolis, Minnesota, rms
has delivered quality electrical connectors
to a wide range of customers world-wide.
With fast turn-around and unbeatable
service, we know you’ll come to expect
the best from rms.
About rms
rms began operation in 1967 as a precision
machining company that found its niche
in the manufacture of complex, dicult
and unusual parts and assemblies for the
Medical, Computer, Defense and Aerospace
industries.
Several years later, rms started to work
with Boeing Commercial Airplane in the
manufacture of critical application, high
reliability electrical connects for the
commercial aerospace industry. Precision
machining and assembly required by the
connector industry was a natural extension
of rms’ expertise in the machining of
ultra-precision components.
Today, the rms Electrical Connector Division
has over 100 standard series of connectors
delivered world-wide. We take pride in
manufacturing one of the highest quality
electrical connectors on the market today.
And we look forward to being at the leading
edge of connector design and development
in the many years to come.
Standard and Custom Design
This catalog was developed to introduce
you to the entire series of the standard
electrical connectors produced at rms. Our
manufacturing facility is geared to meeting
short lead-times and to providing quick
delivery of your connectors.
For custom connectors, our engineering
sta is highly experienced to assist you in
the design and manufacture of
non-standard items.
From concept to completion, rms has
proven over and over that we’re able to
meet your critical requirements for any
type of electrical connector desired.
Order Information:
To order any of the standard series of
connectors listed in this catalog, or for
information about custom designed
connectors, contact the rms Sales
oce at:
A Cretex Aerospace Company
8600 Evergreen Boulevard
Minneapolis, Minnesota USA 55433-6036
Phone: (763) 786-1520
Toll-free: (800) 373-1520
E-mail: rmsconnectorscs@machine.com
Distribution
See rms website (www.rmsconnectors.com)
for authorized distributors.
50
26500 - 3/25/2014
Military and Commercial Aviation
Connectors for Demanding Environments
Threaded and Bayonet
MIL - DTL - 26500 Series
8600 Evergreen Blvd.
Minneapolis, MN 55433
763.786.1520
800.373.1520
rmsconnectorscs@machine.com
rmsconnectors.com