HA Vishay Sprague Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-polar FEATURES * Subminiature package size and light weight * Cylindrical case with axial or radial leads * 2 to 50 VDC * 0.001F to 68F * Operating temperature range : - 55C to + 125C * High stability and reliability * Tested in accordance with MIL-PRF-49137 * Unique and comprehensive custom design capability ELECTRICAL CHARACTERISTICS Operating temperature range: - 55C to + 125C APPLICATIONS Capacitance: Measured at 120 Hz and 25C with a maximum of 2.2 VDC bias and 1.0 volt rms signal. * Hearing aids Capacitance Tolerance: Standard tolerance is 20% for ratings 0.1F and above, and + 40, - 20% for ratings below 0.1F. Special tolerances are also available. * Portable communications Dissipation Factor: When measured simultaneously with capacitance, DF shall not exceed the value shown in the ratings tables. * Laptop computers. DC Leakage Current (DCL Max): MECHANICAL SPECIFICATIONS When measured with DC voltage applied through a 1,000 resistor for 5 minutes, DC leakage (A) shall not exceed: At @ 25C: Leakage current shall not exceed the values listed in the Standard Ratings Tables At @ 85C: Leakage current shall not exceed 10 times the values listed in the Standard Ratings Tables At @ 125C and 66% of rated voltage: Leakage current shall not exceed 15 times the values listed in the Standard Ratings Tables. Operating Voltage: Full working voltage up to 85C. From 85C to 125C working voltage derates linearly to 66% of the 85C working voltage. * Space/avionics Solder coated nickel leads (type N32 per MIL-STD-1276) are standard on all case sizes. Leads are weldable and/or solderable. Special leads are available on request (e.g. bare nickle, gold plated nickle or ribbon leads). Lead length is 1 1/2" [38.1 mm] minimum on nonpolar parts. On polar parts the negative lead is 1-1/4" [31.8mm] minimum and the positive lead is 1-1/2" [38.1mm] minimum. ORDERING INFORMATION HA MODEL 1.0 CAPACITANCE IN F 35 DC VOLTAGE RATING AT + 85C C7 CASE CODE A* LEAD CONFIGURATION M CAPACITANCE TOLERANCE C = Polar N = Nonpolar A = Axial R = Radial E = +40, -20% M = 20% K = 10% J = 5% Example of Part Number Code: HA1.0-35C7AM * To complete part number in rating tables, add A or R. Change suffix if special capacitance tolerance is required. www.vishay.com 60 For technical questions, contact europetantalum@vishay.com Document Number: 43003 Revision 13-Jun-02 HA Subminiature, Leaded Solid Tantalum Capacitors Polar or Nonpolar Vishay Sprague DIMENSIONS in inches [millimeters] POLAR STYLE AXIAL RADIAL 3rd Dot and Polarity D d D (+) 2nd Dot 2nd Dot L L 1st Dot 1st Dot Tolerance Dot (-) Tolerance Dot CASE CODE C0 MAX L 0.100 [2.54] 0.110 [2.80] 0.125 [3.18] 0.145 [3.68] 0.160 [4.06] 0.160 [4.06] 0.190 [4.83] 0.200 [5.08] 0.225 [5.72] 0.250 [6.35] C1 C2 C3 C4 C5 C6 C7 C8 C9 NON POLAR STYLE MAX D 0.057 [1.45] 0.067 [1.70] 0.067 [1.70] 0.067 [1.70] 0.070 [1.78] 0.077 [1.96] 0.077 [1.96] 0.080 [2.03] 0.100 [2.54] 0.150 [3.81] (+) (-) E d MAX E 0.030 [0.76] 0.050 [1.27] 0.050 [1.27] 0.050 [1.27] 0.050 [1.27] 0.050 [1.27] 0.050 [1.27] 0.050 [1.27] 0.070 [1.78] 0.120 [3.05] E TOL AXIAL RADIAL T T W W d d 0.007 [0.18] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.016 [0.41] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.020 [0.51] 0.025 [0.64] Tolerance Dot Tolerance Dot 2nd Dot 2nd Dot LR LA 1st Dot 3rd Dot 1st Dot (-) 3rd Dot (+) d E CASE CODE MAX LA MAX LR MAX W MAX T E d N1 0.175 [4.45] 0.135 [3.43] 0.120 [3.05] 0.070 [1.78] 0.100 [2.54] 0.020 [0.51] 0.010 [0.25] N2 0.210 [5.33] 0.160 [4.06] 0.120 [3.05] 0.070 [1.78] 0.100 [2.54] 0.020 [0.51] 0.010 [0.25] N3 0.240 [6.10] 0.200 [5.08] 0.140 [3.56] 0.080 [2.03] 0.100 [2.54] 0.020 [0.51] 0.010 [0.25] N4 0.275 [6.99] 0.235 [5.97] 0.190 [4.83] 0.105 [2.67] 0.125 [3.18] 0.020 [0.51] 0.010 [0.25] N5 0.310 [7.87] 0.270 [6.86] 0.290 [7.37] 0.155 [3.94] 0.200 [5.08] 0.025 [0.64] 0.016 [0.41] Document Number: 43003 Revision 13-Jun-02 E TOL For technical questions, contact europetantalum@vishay.com www.vishay.com 61 HA Vishay Sprague Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-polar STANDARD RATINGS - POLAR CAPACITORS CAPACITANCE (F) MAX DF (%) 0.47 10 1.5 2.2 MAX. DCL @ + 25C (A) CASE CODE PART NUMBER 0.5 C0 HA.47-2C0*M 10 0.5 C1 HA1.5-2C1*M 10 0.5 C2 HA2.2-2C2*M 3.3 10 0.5 C3 HA3.3-2C3*M 4.7 10 0.5 C4 HA4.7-2C4*M 6.8 10 0.5 C5 HA6.8-2C5*M 10 10 0.5 C6 HA10-2C6*M 15 10 0.5 C7 HA15-2C7*M 22 10 1.0 C8 HA22-2C8*M 68 10 1.5 C9 HA68-2C9*M 1.0 10 0.5 C1 HA1.0-3C1*M 1.5 10 0.5 C2 HA1.5-3C2*M 2.2 10 0.5 C3 HA2.2-3C3*M 3.3 10 0.5 C4 HA3.3-3C4*M 4.7 10 0.5 C5 HA4.7-3C5*M 6.8 10 0.5 C6 HA6.8-3C6*M 10 10 0.5 C7 HA10-3C7*M 15 10 1.0 C8 HA15-3C8*M 47 10 1.5 C9 HA47-3C9*M 0.33 10 C0 HA.33-4C0*M 2 WVDC @ + 85C 3 WVDC @ + 85C 4 WVDC @ + 85C 0.5 0.68 8 0.5 C1 HA.68-4C1*M 1.0 8 0.5 C2 HA1.0-4C2*M 1.5 8 0.5 C3 HA1.5-4C3*M 2.2 8 0.5 C4 HA2.2-4C4*M 3.3 8 0.5 C5 HA3.3-4C5*M 4.7 8 0.5 C6 HA4.7-4C6*M 6.8 8 0.5 C7 HA6.8-4C7*M 10 8 1.0 C8 HA10-4C8*M 33 8 1.5 C9 HA33-4C9*M 6 WVDC @ + 85C 0.22 10 0.5 C0 HA.22-6C0*M 0.47 6 0.5 C1 HA.47-6C1*M 0.68 6 0.5 C2 TC.68-6C2*M 1.0 6 0.5 C3 HA1.0-6C3*M 1.5 6 0.5 C4 HA1.5-6C4*M 2.2 6 0.5 C5 HA2.2-6C5*M 3.3 6 0.5 C6 HA3.3-6C6*M 4.7 6 0.5 C7 HA4.7-6C7*M 6.8 6 1.0 C8 HA6.8-6C8*M 22 6 1.5 C9 HA22-6C9*M * Add A for axial, R for radial www.vishay.com 62 For technical questions, contact europetantalum@vishay.com Document Number: 43003 Revision 13-Jun-02 HA Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-polar Vishay Sprague STANDARD RATINGS - POLAR CAPACITORS CAPACITANCE (F) MAX DF (%) MAX. DCL @ + 25C (A) CASE CODE PART NUMBER 10 WVDC @ + 85C 0.0010 10 0.5 C0 HA.0010-10C0*E 0.0010 10 0.5 C1 HA.0010-10C1*E 0.0015 10 0.5 C0 HA.0015-10C0*E 0.0015 10 0.5 C1 HA.0015-10C1*E 0.0022 10 0.5 C0 HA.0022-10C0*E 0.0022 10 0.5 C1 HA.0022-10C1*E 0.0033 10 0.5 C0 HA.0033-10C0*E 0.0033 10 0.5 C1 HA.0033-10C1*E 0.0047 10 0.5 C0 HA.0047-10C0*E 0.0047 10 0.5 C1 HA.0047-10C1*E 0.15 10 0.5 C0 HA.15-10C0*M 0.33 6 0.5 C1 HA.33-10C1*M 0.47 6 0.5 C2 HA.47-10C2*M 0.68 6 0.5 C3 HA.68-10C3*M 1.0 6 0.5 C4 HA1.0-10C4*M 1.5 6 0.5 C5 HA1.5-10C5*M 2.2 6 0.5 C6 HA2.2-10C6*M 3.3 6 0.5 C7 HA3.3-10C7*M 4.7 6 1.0 C8 HA4.7-10C8*M 15 6 1.5 C9 HA15-10C9*M 15 WVDC @ + 85C 0.10 10 0.5 C0 HA.10-15C0*M 0.22 6 0.5 C1 HA.22-15C1*M 0.33 6 0.5 C2 HA.33-15C2*M 0.47 6 0.5 C3 HA.47-15C3*M 0.68 6 0.5 C4 HA.68-15C4*M 1.0 6 0.5 C5 HA1.0-15C5*M 1.5 6 0.5 C6 HA1.5-15C6*M 2.2 6 0.5 C7 HA2.2-15C7*M 3.3 6 1.0 C8 HA3.3-15C8*M 10 6 1.5 C9 HA10-15C9*M C0 HA.0068-0C0*E 20 WVDC @ + 85C 0.0068 10 0.5 0.0068 10 0.5 C1 HA.0068-0C1*E 0.010 10 0.5 C0 HA.010-20C0*E 0.015 10 0.5 C0 HA.015-20C0*E 0.022 10 0.5 C0 HA.022-20C0*E 0.033 10 0.5 C0 HA.033-20C0*E 0.047 10 0.5 C0 HA.047-20C0*E 0.068 10 0.5 C0 HA.068-20C0*E 0.15 6 0.5 C1 HA.15-20C1*M 0.22 6 0.5 C2 HA.22-20C2*M *Add A for axial, R for radial Document Number: 43003 Revision 13-Jun-02 For technical questions, contact europetantalum@vishay.com www.vishay.com 63 HA Vishay Sprague Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-polar STANDARD RATINGS - POLAR CAPACITORS CAPACITANCE (F) MAX DF (%) MAX. DCL @ + 25C (A) CASE CODE PART NUMBER 20 WVDC @ + 85C(Contd) 0.33 6 0.5 C3 HA.33-20C3*M 0.47 6 0.5 C4 HA.47-20C4*M 0.68 6 0.5 C5 HA.68-20C5*M 1.0 6 0.5 C6 HA1.0-20C6*M 1.5 6 0.5 C7 HA1.5-20C7*M 2.2 6 1.0 C8 HA2.2-20C8*M 4.7 6 1.5 C9 HA4.7-20C9*M 6.8 6 1.5 C9 HA6.8-20C9*M 35 WVDC @ + 85C 0.010 6 0.5 C1 HA.010-35C1*E 0.015 6 0.5 C1 HA.015-35C1*E 0.022 6 0.5 C1 HA.022-35C1*E 0.033 6 0.5 C1 HA.033-35C1*E 0.047 6 0.5 C1 HA.047-35C1*E 0.068 6 0.5 C1 HA.068-35C1*E 0.10 6 0.5 C1 HA.10-35C1*M 0.15 6 0.5 C2 HA.15-35C2*M 0.22 6 0.5 C3 HA.22-35C3*M 0.33 6 0.5 C4 HA.33-35C4*M 0.47 6 0.5 C5 HA.47-35C5*M 0.68 6 0.5 C6 HA.68-35C6*M 1.0 6 0.5 C7 HA1.0-35C7*M 1.5 6 0.5 C8 HA1.5-35C8*M 3.3 6 1.5 C9 HA3.3-35C9*M 50 WVDC @ + 85C 0.10 6 0.5 C2 HA.10-50C2*M 0.15 6 0.5 C3 HA.15-50C3*M 0.22 6 0.5 C4 HA.22-50C4*M 0.33 6 0.5 C5 HA.33-50C5*M 0.47 6 0.5 C6 HA.47-50C6*M 0.68 6 0.5 C7 HA.68-50C7*M 1.0 6 1.0 C8 HA1.0-50C8*M 1.5 6 1.5 C9 HA1.5-50C9*M 2.2 6 1.5 C9 HA2.2-50C9*M *Add A for axial, R for radial www.vishay.com 64 For technical questions, contact europetantalum@vishay.com Document Number: 43003 Revision 13-Jun-02 HA Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-polar Vishay Sprague STANDARD RATINGS - NON-POLAR CAPACITORS CAPACITANCE (F) MAX DF (%) MAX. DCL @ + 25C (A) CASE CODE PART NUMBER 2 WVDC @ + 85C 1.0 10 0.5 N1 HA1.0-2N1*M 2.2 10 0.5 N2 HA2.2-2N2*M 4.7 10 0.5 N3 HA4.7-2N3*M 10 10 1.0 N4 HA10-2N4*M 33 10 1.5 N5 HA33-2N5*M 3 WVDC @ + 85C 0.68 10 0.5 N1 HA.68-3N1*M 1.5 10 0.5 N2 HA1.5-3N2*M 3.3 10 0.5 N3 HA3.3-3N3*M 6.8 10 1.0 N4 HA6.8-3N4*M 22 10 1.5 N5 HA22-3N5*M 0.47 8 0.5 N1 HA.47-4N1*M 1.0 8 0.5 N2 HA1.0-4N2*M 2.2 8 0.5 N3 HA2.2-4N3*M 4.7 8 1.0 N4 HA4.7-4N4*M 15 8 1.5 N5 HA15-4N5*M 4 WVDC @ + 85C 6 WVDC @ + 85C 0.33 6 0.5 N1 HA.33-6N1*M 0.68 6 0.5 N2 HA.68-6N2*M 1.5 6 0.5 N3 HA1.5-6N3*M 3.3 6 1.0 N4 HA3.3-6N4*M 10 6 1.5 N5 HA10-6N5*M 10 WVDC @ + 85C 0.22 6 0.5 N1 HA.22-10N1*M 0.47 6 0.5 N2 HA.47-10N2*M 1.0 6 0.5 N3 HA1.0-10N3*M 2.2 6 1.0 N4 HA2.2-10N4*M 6.8 6 1.5 N5 HA6.8-10N5*M 15 WVDC @ + 85C 0.15 6 0.5 N1 HA.15-15N1*M 0.33 6 0.5 N2 HA.33-15N2*M 0.68 6 0.5 N3 HA.68-15N3*M 1.5 6 1.0 N4 HA1.5-15N4*M 4.7 6 1.5 N5 HA4.7-15N5*M 20 WVDC @ + 85C 0.010 6 0.5 N1 HA.010-20N1*M 0.015 6 0.5 N1 HA.015-20N1*M 0.022 6 0.5 N1 HA.022-20N1*M *Add A for axial, R for radial Document Number: 43003 Revision 13-Jun-02 For technical questions, contact europetantalum@vishay.com www.vishay.com 65 HA Vishay Sprague Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-polar STANDARD RATINGS - NON-POLAR CAPACITORS CAPACITANCE (F) MAX DF (%) MAX. DCL @ + 25C (A) CASE CODE PART NUMBER 0.033 6 0.5 N2 HA.033-20N2*M 0.047 6 0.5 N2 HA.047-20N2*M 0.068 6 0.5 N2 HA.068-20N2*M 0.10 6 0.5 N1 HA.10-20N1*M 0.22 6 0.5 N2 HA.22-20N2*M 20 WVDC @ + 85C(Contd.) 0.47 6 0.5 N3 HA.47-20N3*M 1.0 6 1.0 N4 HA1.0-20N4*M 2.2 6 1.5 N5 H2.2-20N5*M 3.3 6 1.5 N5 HA3.3-20N5*M 0.10 6 0.5 N2 HA.10-35N2*M 0.15 6 0.5 N2 HA.15-35N2*M 0.22 6 0.5 N3 HA.22-35N3*M 0.33 6 0.5 N3 HA.33-35N3*M 0.47 6 1.0 N4 HA.47-35N4*M 35 WVDC @ + 85C 0.68 6 1.0 N4 HA.68-35N4*M 1.0 6 1.5 N5 HA1.0-35N5*M 1.5 6 1.5 N5 HA1.5-35N5*M 50 WVDC @ + 85C 0.068 6 0.5 N3 HA.068-50N3*M 0.15 6 0.5 N3 HA.15-50N3*M 0.33 6 1.0 N4 HA.33-50N4*M 0.68 6 1.5 N5 HA.68-50N5*M *Add A for axial, R for radial MARKING HA Capacitors case sizes N4 and N5 are print marked: All other case sizes are have color dot marking: - Capacitance is in picofarads Capacitance Color Digit - 1st and 2nd digits are significant figures In picofarads, indicated by 3 dots. Black 0 - 3rd digit indicates the number of zeros. 1st and 2nd dot give Brown 1 Capacitance Tolerance Is indicated by a dot on the side of the case. Black dot is omitted. Color Gold Silver None None Tolerance 5% 10% 20% + 40%/- 20% The positive lead is indicated by a color dot of red epoxy on the unit. www.vishay.com 66 the significant digits. Red 2 3rd dot indicates the number Orange 3 of zeros. Yellow 4 Color dot location is shown on Green 5 the dimensional sketches. Blue 6 Black dot is omitted on black sleeve. Violet 7 Grey 8 White 9 e.g. Yellow-Violet-Green = 4,700,000 pf For technical questions, contact europetantalum@vishay.com = 4.7 F Document Number: 43003 Revision 13-Jun-02 HA Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-polar Vishay Sprague PERFORMANCE AND RELIABILITY The capacitors are tested in accordance with MIL-PRF49137, with specific requirements as follows: IMPEDANCE vs. FREQUENCY Temperature Stability: When tested per MIL-PRF-49137/ 6, capacitance shall be within +/-15% at -55C and 85C, and +/-10% at 25C after exposure to temperature extremes. DF shall be within 200% of initial limit at - 55C, 150% of initial limit at 85C, and meet the initial at 25C. DCL shall be within 10 x initial limit at 85C, and meet the initial limit at 25C. Life: (per Method 108 of MIL-STD-202) after 1,000 hours at 85C and rated voltage; capacitance shall be within +/-10% of initial limit, DF within initial limits, and leakage within 200% of initial limit. Surge Voltage: (per MIL-PRF-49317) After 1,000 cycles at 85C and 1.3 x WVDC; capacitance shall be within +/-10% of initial limit, DF and leakage within initial limits. Resistance to Soldering Heat: (per Method 210 0f MILSTD-202, Condition B) After immersion in 260C molten solder to within a 1/4" of the body of the unit, there shall be no evidence of mechanical or electrical degradation. Solderability: (per Method 208 of MIL-STD-202) After dipping leads in 235C molten solder to within .125" of the body of the unit, the solder shall cover 95% of the lead surface. CAPACITANCE VS. TEMPERATURE CHANGE IN CAPACITANCE % +10 (MFD-WVDC) E SP +5 CI C FI I AT 10 0 10 -1 F 0 0V -5 SP EC I C FI I AT TYP ON 0 ICAL F - H 1 V 10 -2 0V 0. 1K 04 7 F -2 0V 0. 047 04 F 7 -2 F- 0V 35 V 0.0 4 0.0 7F 47 F -50V -35 V 4.7 4.7 F-1 F 0V -20 V 500 0. 200 100 50 20 10 5.0 2.0 4.7 1.0 F -20 0.5 V 0.2 0.1 100 500 1 Hz 2 5 KHz 10 20 50 100 FREQUENCY 500 1 KHz 2 5 10 MHz LEAKAGE CURRENT - TEMPERATURE 1.0 (MFD-WVDC) 1F-20V 100F-10V 0.1 ON 0.01 -40 -10 -40 (MFD-WVDC) 2K D.C. LEAKAGE CURRENT (A) Terminal Strength: (per Method 211 of MIL-STD-202) After the following test there shall be no loosening of the terminals or permanent damage to the terminals. Test Condition A: (Pull Test) 0.010" leads withstand 1 pound, 0.016" leads 2 pounds and 0.007" leads 1/2 pound. Test Condition C: (Bend Test) All leads shall withstand 3-90 bends with a 1/2 pound applied force. 5K IMPEDANCE-OHMS Moisture Resistance: (per Method 106 of MIL-STD-202) After 10 cycles of 24 hours at 25C to 65C and 80-98% RH; capacitance shall be within +/-15% of initial value, DF within 1.5 x initial limit and leakage within 3 x initial limit. 10K -10 +25 +85 -10 +100 0 +20 +85 TEMPERATURE C TEMPERATURE 0C Document Number: 43003 Revision 13-Jun-02 For technical questions, contact europetantalum@vishay.com www.vishay.com 67