Document Number: 43003
Revision 13-Jun-02
www.vishay.com
60
HA
Vishay Sprague
For technical questions, contact europetantalum@vishay.com
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-polar
FEATURES
• Subminiature package size and light weight
• Cylindrical case with axial or radial leads
• 2 to 50 VDC
• 0.001µF to 68µF
• Operating temperature range : - 55°C to + 125°C
• High stability and reliability
• Tested in accordance with MIL-PRF-49137
• Unique and comprehensive custom design capability
APPLICATIONS
• Hearing aids
• Portable communications
• Space/avionics
• Laptop computers.
ELECTRICAL CHARACTERISTICS
Operating temperature range: - 55°C to + 125°C
Capacitance: Measured at 120 Hz and 25°C with a
maximum of 2.2 VDC bias and 1.0 volt rms signal.
Capacitance Tolerance: Standard tolerance is ± 20% for
ratings 0.1µF and above, and + 40, - 20% for ratings below
0.1µF. Special tolerances are also available.
Dissipation Factor: When measured simultaneously with
capacitance, DF shall not exceed the value shown in the
ratings tables.
DC Leakage Current (DCL Max):
When measured with DC voltage applied through a 1,000Ω
resistor for 5 minutes, DC leakage (µA) shall not exceed:
At @ 25°C: Leakage current shall not exceed the values
listed in the Standard Ratings Tables
At @ 85°C: Leakage current shall not exceed 10 times the
values listed in the Standard Ratings Tables
At @ 125°C and 66% of rated voltage: Leakage current
shall not exceed 15 times the values listed in the Standard
Ratings Tables.
Operating Voltage: Full working voltage up to 85°C. From
85°C to 125°C working voltage derates linearly to 66% of
the 85°C working voltage.
ORDERING INFORMATION
C = Polar
N = Nonpolar
HA
MODEL
1.0
CAPACITANCE
IN µF
A*
LEAD
CONFIGURATION
A = Axial
R = Radial
C7
CASE CODE
35
DC VOLTAGE RATING
AT + 85°C
M
CAPACITANCE
TOLERANCE
E = +40, -20%
M = ± 20%
K = ± 10%
J = ± 5%
Example of Part Number Code: HA1.0-35C7AM
* To complete part number in rating tables, add A or R.
Change suffix if special capacitance tolerance is required.
MECHANICAL SPECIFICATIONS
Solder coated nickel leads (type N32 per MIL-STD-1276)
are standard on all case sizes.
Leads are weldable and/or solderable.
Special leads are available on request (e.g. bare nickle, gold
plated nickle or ribbon leads).
Lead length is 1 1/2” [38.1 mm] minimum on nonpolar parts.
On polar parts the negative lead is 1-1/4” [31.8mm] minimum
and the positive lead is 1-1/2” [38.1mm] minimum.
www.vishay.com
61
HA
Vishay Sprague
Document Number: 43003
Revision 13-Jun-02
For technical questions, contact europetantalum@vishay.com
DIMENSIONS in inches [millimeters]
POLAR STYLE
E
Tolerance
Dot
RADIAL
d
AXIAL
DD
d
LL
(+)
(+)
(-)
3rd Dot and Polarity
2nd Dot
1st Dot 1st Dot
2nd Dot
Tolerance
Dot
CASE MAX MAX MAX E TOL
CODE L D E ±d
C0 0.100 0.057 0.030 0.015 0.007
[2.54] [1.45] [0.76] [0.38] [0.18]
C1 0.110 0.067 0.050 0.015 0.010
[2.80] [1.70] [1.27] [0.38] [0.25]
C2 0.125 0.067 0.050 0.015 0.010
[3.18] [1.70] [1.27] [0.38] [0.25]
C3 0.145 0.067 0.050 0.015 0.010
[3.68] [1.70] [1.27] [0.38] [0.25]
C4 0.160 0.070 0.050 0.015 0.010
[4.06] [1.78] [1.27] [0.38] [0.25]
C5 0.160 0.077 0.050 0.015 0.010
[4.06] [1.96] [1.27] [0.38] [0.25]
C6 0.190 0.077 0.050 0.015 0.010
[4.83] [1.96] [1.27] [0.38] [0.25]
C7 0.200 0.080 0.050 0.015 0.010
[5.08] [2.03] [1.27] [0.38] [0.25]
C8 0.225 0.100 0.070 0.020 0.010
[5.72] [2.54] [1.78] [0.51] [0.25]
C9 0.250 0.150 0.120 0.025 0.016
[6.35] [3.81] [3.05] [0.64] [0.41]
CASE MAX MAX MAX MAX E TOL
CODE LA LR W T E ±d
N1 0.175 0.135 0.120 0.070 0.100 0.020 0.010
[4.45] [3.43] [3.05] [1.78] [2.54] [0.51] [0.25]
N2 0.210 0.160 0.120 0.070 0.100 0.020 0.010
[5.33] [4.06] [3.05] [1.78] [2.54] [0.51] [0.25]
N3 0.240 0.200 0.140 0.080 0.100 0.020 0.010
[6.10] [5.08] [3.56] [2.03] [2.54] [0.51] [0.25]
N4 0.275 0.235 0.190 0.105 0.125 0.020 0.010
[6.99] [5.97] [4.83] [2.67] [3.18] [0.51] [0.25]
N5 0.310 0.270 0.290 0.155 0.200 0.025 0.016
[7.87] [6.86] [7.37] [3.94] [5.08] [0.64] [0.41]
AXIAL RADIAL
T
W
d
d
E
LR
W
T
LA
Tolerance
Dot
1st Dot
3rd Dot
1st Dot
3rd Dot
(+)
(-)
NON POLAR STYLE
2nd Dot
Tolerance
Dot
2nd Dot
(-)
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Nonpolar
Document Number: 43003
Revision 13-Jun-02
www.vishay.com
62
HA
Vishay Sprague
For technical questions, contact europetantalum@vishay.com
STANDARD RATINGS - POLAR CAPACITORS
2 WVDC @ + 85°C
0.47 10 0.5 C0 HA.47-2C0*M
1.5 10 0.5 C1 HA1.5-2C1*M
2.2 10 0.5 C2 HA2.2-2C2*M
3.3 10 0.5 C3 HA3.3-2C3*M
4.7 10 0.5 C4 HA4.7-2C4*M
6.8 10 0.5 C5 HA6.8-2C5*M
10 10 0.5 C6 HA10-2C6*M
15 10 0.5 C7 HA15-2C7*M
22 10 1.0 C8 HA22-2C8*M
68 10 1.5 C9 HA68-2C9*M
3 WVDC @ + 85°C
1.0 10 0.5 C1 HA1.0-3C1*M
1.5 10 0.5 C2 HA1.5-3C2*M
2.2 10 0.5 C3 HA2.2-3C3*M
3.3 10 0.5 C4 HA3.3-3C4*M
4.7 10 0.5 C5 HA4.7-3C5*M
6.8 10 0.5 C6 HA6.8-3C6*M
10 10 0.5 C7 HA10-3C7*M
15 10 1.0 C8 HA15-3C8*M
47 10 1.5 C9 HA47-3C9*M
4 WVDC @ + 85°C
0.33 10 0.5 C0 HA.33-4C0*M
0.68 8 0.5 C1 HA.68-4C1*M
1.0 8 0.5 C2 HA1.0-4C2*M
1.5 8 0.5 C3 HA1.5-4C3*M
2.2 8 0.5 C4 HA2.2-4C4*M
3.3 8 0.5 C5 HA3.3-4C5*M
4.7 8 0.5 C6 HA4.7-4C6*M
6.8 8 0.5 C7 HA6.8-4C7*M
10 8 1.0 C8 HA10-4C8*M
33 8 1.5 C9 HA33-4C9*M
6 WVDC @ + 85°C
0.22 10 0.5 C0 HA.22-6C0*M
0.47 6 0.5 C1 HA.47-6C1*M
0.68 6 0.5 C2 TC.68-6C2*M
1.0 6 0.5 C3 HA1.0-6C3*M
1.5 6 0.5 C4 HA1.5-6C4*M
2.2 6 0.5 C5 HA2.2-6C5*M
3.3 6 0.5 C6 HA3.3-6C6*M
4.7 6 0.5 C7 HA4.7-6C7*M
6.8 6 1.0 C8 HA6.8-6C8*M
22 6 1.5 C9 HA22-6C9*M
* Add A for axial, R for radial
CAPACITANCE MAX MAX. DCL CASE PART NUMBER
(µF) DF (%) @ + 25°C (µA) CODE
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-polar
www.vishay.com
63
HA
Vishay Sprague
Document Number: 43003
Revision 13-Jun-02
For technical questions, contact europetantalum@vishay.com
STANDARD RATINGS - POLAR CAPACITORS
10 WVDC @ + 85°C
0.0010 10 0.5 C0 HA.0010-10C0*E
0.0010 10 0.5 C1 HA.0010-10C1*E
0.0015 10 0.5 C0 HA.0015-10C0*E
0.0015 10 0.5 C1 HA.0015-10C1*E
0.0022 10 0.5 C0 HA.0022-10C0*E
0.0022 10 0.5 C1 HA.0022-10C1*E
0.0033 10 0.5 C0 HA.0033-10C0*E
0.0033 10 0.5 C1 HA.0033-10C1*E
0.0047 10 0.5 C0 HA.0047-10C0*E
0.0047 10 0.5 C1 HA.0047-10C1*E
0.15 10 0.5 C0 HA.15-10C0*M
0.33 6 0.5 C1 HA.33-10C1*M
0.47 6 0.5 C2 HA.47-10C2*M
0.68 6 0.5 C3 HA.68-10C3*M
1.0 6 0.5 C4 HA1.0-10C4*M
1.5 6 0.5 C5 HA1.5-10C5*M
2.2 6 0.5 C6 HA2.2-10C6*M
3.3 6 0.5 C7 HA3.3-10C7*M
4.7 6 1.0 C8 HA4.7-10C8*M
15 6 1.5 C9 HA15-10C9*M
15 WVDC @ + 85°C
0.10 10 0.5 C0 HA.10-15C0*M
0.22 6 0.5 C1 HA.22-15C1*M
0.33 6 0.5 C2 HA.33-15C2*M
0.47 6 0.5 C3 HA.47-15C3*M
0.68 6 0.5 C4 HA.68-15C4*M
1.0 6 0.5 C5 HA1.0-15C5*M
1.5 6 0.5 C6 HA1.5-15C6*M
2.2 6 0.5 C7 HA2.2-15C7*M
3.3 6 1.0 C8 HA3.3-15C8*M
10 6 1.5 C9 HA10-15C9*M
20 WVDC @ + 85°C
0.0068 10 0.5 C0 HA.0068-0C0*E
0.0068 10 0.5 C1 HA.0068-0C1*E
0.010 10 0.5 C0 HA.010-20C0*E
0.015 10 0.5 C0 HA.015-20C0*E
0.022 10 0.5 C0 HA.022-20C0*E
0.033 10 0.5 C0 HA.033-20C0*E
0.047 10 0.5 C0 HA.047-20C0*E
0.068 10 0.5 C0 HA.068-20C0*E
0.15 6 0.5 C1 HA.15-20C1*M
0.22 6 0.5 C2 HA.22-20C2*M
*Add A for axial, R for radial
CAPACITANCE MAX MAX. DCL CASE PART NUMBER
(µF) DF (%) @ + 25°C (µA) CODE
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-polar
Document Number: 43003
Revision 13-Jun-02
www.vishay.com
64
HA
Vishay Sprague
For technical questions, contact europetantalum@vishay.com
STANDARD RATINGS - POLAR CAPACITORS
20 WVDC @ + 85°C(Contd)
0.33 6 0.5 C3 HA.33-20C3*M
0.47 6 0.5 C4 HA.47-20C4*M
0.68 6 0.5 C5 HA.68-20C5*M
1.0 6 0.5 C6 HA1.0-20C6*M
1.5 6 0.5 C7 HA1.5-20C7*M
2.2 6 1.0 C8 HA2.2-20C8*M
4.7 6 1.5 C9 HA4.7-20C9*M
6.8 6 1.5 C9 HA6.8-20C9*M
35 WVDC @ + 85°C
0.010 6 0.5 C1 HA.010-35C1*E
0.015 6 0.5 C1 HA.015-35C1*E
0.022 6 0.5 C1 HA.022-35C1*E
0.033 6 0.5 C1 HA.033-35C1*E
0.047 6 0.5 C1 HA.047-35C1*E
0.068 6 0.5 C1 HA.068-35C1*E
0.10 6 0.5 C1 HA.10-35C1*M
0.15 6 0.5 C2 HA.15-35C2*M
0.22 6 0.5 C3 HA.22-35C3*M
0.33 6 0.5 C4 HA.33-35C4*M
0.47 6 0.5 C5 HA.47-35C5*M
0.68 6 0.5 C6 HA.68-35C6*M
1.0 6 0.5 C7 HA1.0-35C7*M
1.5 6 0.5 C8 HA1.5-35C8*M
3.3 6 1.5 C9 HA3.3-35C9*M
50 WVDC @ + 85°C
0.10 6 0.5 C2 HA.10-50C2*M
0.15 6 0.5 C3 HA.15-50C3*M
0.22 6 0.5 C4 HA.22-50C4*M
0.33 6 0.5 C5 HA.33-50C5*M
0.47 6 0.5 C6 HA.47-50C6*M
0.68 6 0.5 C7 HA.68-50C7*M
1.0 6 1.0 C8 HA1.0-50C8*M
1.5 6 1.5 C9 HA1.5-50C9*M
2.2 6 1.5 C9 HA2.2-50C9*M
*Add A for axial, R for radial
CAPACITANCE MAX MAX. DCL CASE PART NUMBER
(µF) DF (%) @ + 25°C (µA) CODE
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-polar
www.vishay.com
65
HA
Vishay Sprague
Document Number: 43003
Revision 13-Jun-02
For technical questions, contact europetantalum@vishay.com
STANDARD RATINGS - NON-POLAR CAPACITORS
2 WVDC @ + 85°C
1.0 10 0.5 N1 HA1.0-2N1*M
2.2 10 0.5 N2 HA2.2-2N2*M
4.7 10 0.5 N3 HA4.7-2N3*M
10 10 1.0 N4 HA10-2N4*M
33 10 1.5 N5 HA33-2N5*M
3 WVDC @ + 85°C
0.68 10 0.5 N1 HA.68-3N1*M
1.5 10 0.5 N2 HA1.5-3N2*M
3.3 10 0.5 N3 HA3.3-3N3*M
6.8 10 1.0 N4 HA6.8-3N4*M
22 10 1.5 N5 HA22-3N5*M
4 WVDC @ + 85°C
0.47 8 0.5 N1 HA.47-4N1*M
1.0 8 0.5 N2 HA1.0-4N2*M
2.2 8 0.5 N3 HA2.2-4N3*M
4.7 8 1.0 N4 HA4.7-4N4*M
15 8 1.5 N5 HA15-4N5*M
6 WVDC @ + 85°C
0.33 6 0.5 N1 HA.33-6N1*M
0.68 6 0.5 N2 HA.68-6N2*M
1.5 6 0.5 N3 HA1.5-6N3*M
3.3 6 1.0 N4 HA3.3-6N4*M
10 6 1.5 N5 HA10-6N5*M
10 WVDC @ + 85°C
0.22 6 0.5 N1 HA.22-10N1*M
0.47 6 0.5 N2 HA.47-10N2*M
1.0 6 0.5 N3 HA1.0-10N3*M
2.2 6 1.0 N4 HA2.2-10N4*M
6.8 6 1.5 N5 HA6.8-10N5*M
15 WVDC @ + 85°C
0.15 6 0.5 N1 HA.15-15N1*M
0.33 6 0.5 N2 HA.33-15N2*M
0.68 6 0.5 N3 HA.68-15N3*M
1.5 6 1.0 N4 HA1.5-15N4*M
4.7 6 1.5 N5 HA4.7-15N5*M
20 WVDC @ + 85°C
0.010 6 0.5 N1 HA.010-20N1*M
0.015 6 0.5 N1 HA.015-20N1*M
0.022 6 0.5 N1 HA.022-20N1*M
*Add A for axial, R for radial
CAPACITANCE MAX MAX. DCL CASE PART NUMBER
(µF) DF (%) @ + 25°C (µA) CODE
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-polar
Document Number: 43003
Revision 13-Jun-02
www.vishay.com
66
HA
Vishay Sprague
For technical questions, contact europetantalum@vishay.com
MARKING
HA Capacitors case sizes N4 and N5 are print marked:
- Capacitance is in picofarads
- 1st and 2nd digits are significant figures
- 3rd digit indicates the number of zeros.
STANDARD RATINGS - NON-POLAR CAPACITORS
*Add A for axial, R for radial
20 WVDC @ + 85°C(Contd.)
0.033 6 0.5 N2 HA.033-20N2*M
0.047 6 0.5 N2 HA.047-20N2*M
0.068 6 0.5 N2 HA.068-20N2*M
0.10 6 0.5 N1 HA.10-20N1*M
0.22 6 0.5 N2 HA.22-20N2*M
0.47 6 0.5 N3 HA.47-20N3*M
1.0 6 1.0 N4 HA1.0-20N4*M
2.2 6 1.5 N5 H2.2-20N5*M
3.3 6 1.5 N5 HA3.3-20N5*M
35 WVDC @ + 85°C
0.10 6 0.5 N2 HA.10-35N2*M
0.15 6 0.5 N2 HA.15-35N2*M
0.22 6 0.5 N3 HA.22-35N3*M
0.33 6 0.5 N3 HA.33-35N3*M
0.47 6 1.0 N4 HA.47-35N4*M
0.68 6 1.0 N4 HA.68-35N4*M
1.0 6 1.5 N5 HA1.0-35N5*M
1.5 6 1.5 N5 HA1.5-35N5*M
50 WVDC @ + 85°C
0.068 6 0.5 N3 HA.068-50N3*M
0.15 6 0.5 N3 HA.15-50N3*M
0.33 6 1.0 N4 HA.33-50N4*M
0.68 6 1.5 N5 HA.68-50N5*M
All other case sizes are have color dot marking:
Capacitance Color Digit
In picofarads, indicated by 3 dots. Black 0
1st and 2nd dot give Brown 1
the significant digits. Red 2
3rd dot indicates the number Orange 3
of zeros. Yellow 4
Color dot location is shown on Green 5
the dimensional sketches. Blue 6
Black dot is omitted on black sleeve. Violet 7
Grey 8
White 9
e.g. Yellow-Violet-Green = 4,700,000 pf
= 4.7 µF
Capacitance Tolerance Color Tolerance
Is indicated by a dot on the Gold ± 5%
side of the case. Silver ± 10%
Black dot is omitted. None ± 20%
None + 40%/- 20%
The positive lead is indicated by a color dot of red
epoxy on the unit.
CAPACITANCE MAX MAX. DCL CASE PART NUMBER
(µF) DF (%) @ + 25°C (µA) CODE
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-polar
www.vishay.com
67
HA
Vishay Sprague
Document Number: 43003
Revision 13-Jun-02
For technical questions, contact europetantalum@vishay.com
PERFORMANCE AND RELIABILITY
The capacitors are tested in accordance with MIL-PRF-
49137, with specific requirements as follows:
Temperature Stability: When tested per MIL-PRF-49137/
6, capacitance shall be within +/-15% at -55°C and 85°C,
and +/-10% at 25°C after exposure to temperature extremes.
DF shall be within 200% of initial limit at - 55°C, 150% of
initial limit at 85°C, and meet the initial at 25°C. DCL shall
be within 10 x initial limit at 85°C, and meet the initial limit at
25°C.
Moisture Resistance: (per Method 106 of MIL-STD-202)
After 10 cycles of 24 hours at 25°C to 65°C and 80-98%
RH; capacitance shall be within +/-15% of initial value, DF
within 1.5 x initial limit and leakage within 3 x initial limit.
Life: (per Method 108 of MIL-STD-202) after 1,000 hours at
85°C and rated voltage; capacitance shall be within +/-10%
of initial limit, DF within initial limits, and leakage within 200%
of initial limit.
Surge Voltage: (per MIL-PRF-49317) After 1,000 cycles at
85°C and 1.3 x WVDC; capacitance shall be within +/-10%
of initial limit, DF and leakage within initial limits.
Resistance to Soldering Heat: (per Method 210 0f MIL-
STD-202, Condition B) After immersion in 260°C molten
solder to within a 1/4” of the body of the unit, there shall be
no evidence of mechanical or electrical degradation.
Solderability: (per Method 208 of MIL-STD-202) After
dipping leads in 235°C molten solder to within .125” of the
body of the unit, the solder shall cover 95% of the lead
surface.
Terminal Strength: (per Method 211 of MIL-STD-202) After
the following test there shall be no loosening of the terminals
or permanent damage to the terminals. Test Condition A:
(Pull Test) 0.010” leads withstand 1 pound, 0.016” leads 2
pounds and 0.007” leads 1/2 pound. Test Condition C: (Bend
Test) All leads shall withstand 3-90° bends with a 1/2 pound
applied force.
1.0
0.1
0.01
-40 -10 0 +85+20
(MFD-WVDC)
1µF-20V
100µF-10V
D.C. LEAKAGE CURRENT (µA)
TEMPERATURE °C
LEAKAGE CURRENT - TEMPERATURE
CAPACITANCE VS. TEMPERATURE
+10
+ 5
0
- 5
-10
-40 -10 +25 +100
+85
(MFD-WVDC)
SPECIFICATION
SPECIFICATION
100
µ
F -10V
1
µ
H-20V
100
µ
F -10V
TYPICAL
CHANGE IN CAPACITANCE %
TEMPERATURE 0°C
100 500 1 2 5 10 20 50 100 500 1 2 5 10
Hz KHz FREQUENCY KHz MHz
IMPEDANCE-OHMS
(MFD-WVDC)
0.047
µ
F-20V
0.047
µ
F-20V
0.047
µ
F-35V
0.047µF-50V
0.047µF-35V
4.7µF-10V
4.7µF-20V
4.7µF-20V
IMPEDANCE vs. FREQUENCY
0.1
0.2
0.5
1.0
2.0
5.0
10
20
50
100
200
500
1K
2K
5K
10K
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-polar
