Du line OPUS wireless light switch Type G8286 4406 703 (R) Fieldbus Installationbus * Dupline transmitter for building automation applications * 4 individually programmable push-button inputs * Channel programming using GAP 1605 * Wall mounting * Range up to 100 m in open air * 3 V battery supply (CR2032) * Battery life: up to 5 years at normal use Product Description G82864406703 is a 4-channel transceiver with 4 contact inputs and 4 LEDs for indication of received signal from the G34860058230 base. It can be used alone or integrated in the OPUS-66 series from the Danish supplier LK. Ordering Key The light switch is part of the Dupline(R) "Smart House" building automation concept and can be used to control lights, roller blinds/Venetian blinds and other functions supported by the master generator. Type Selection Type: Dupline(R) OPUS housing Input type 4 channels 4 inputs Colour/input type Supply General Specifications Supply Colour Ordering no. Channel coding Dupline(R) White Light grey G 8286 4406 703 G 8286 4408 703 Out 1-4 Housing Environment Protection degree Pollution degree Operating temperature Storage temperature Humidity (non-condensing) Weight Dimensions Input Specifications Wireless push-button Transmission frequency 868 MHz Supply Specifications Power supply G 8286 4406 703 Battery: CR2023 Via GAP 1605 and special cable: GAP-TPH-CAB Push-button 1-4 (LK OPUS) IP 20 3 (IEC 60664) 0-50C/32-122F -20-70C/-4-158F 20 - 80% 50 g - without battery 66 x 66 x 11 mm (including frame) Mode of Operation The G8286 440x 703 light switch is designed for base unit G3486 0058 230 and will only function with this unit. The wireless G8286 440x 703 light switches are programmed as standard light switches G8x10 44xx using a GAP1605 (see data sheet for this unit). The communication between G8286 440x 703 light switches and the G3486 0058 230 base is established in the following way: - Push the "Mode" button on the G3486 0058 230 base until the red LED indicates association. - Push the push-button on the G8286 440x 703 light switch module that you want to associate with the G3486 0058 230 base. Once the association is complete, all 4 LEDs will light up briefly (approx. 1 second). If the association fails, e.g. because the range is exceeded, all LEDs in the light switch module will light up simultaneously for approx. 500 ms. This also occurs if, under normal circumstances, it is not possible to establish connection between the G3486 0058 230 base and the G8286 440x 703 light switch modules. It is possible to disable the communication between the G3486 0058 230 base and all the modules with which it is associated. - Push the "Mode" button on the G3486 0058 230 base until the red "Disable" LED is lit. This means that there is no connection between the G3486 0058 230 base and its associations. To reestablish the connection, push "Mode" until neither "Associate" or "Deactivate" are lit. Under normal circumstances, the "Supply" and "Dupline" LEDs will be lit continuously, whereas the LED for "Communication" only blinks briefly Specifications are subject to change without notice (06.09.2006) Dupline(R) is a registered trademark. A product of the CARLO GAVAZZI Group when you push an associated G8286 440x 703 light switch. The LEDs always follow their allocated push-button and cannot be programmed individually or removed. The LED indication provides confirmation that the communication is successful. 1 Du line (R) Fieldbus Dimensions Installationbus Push-button/LED allocation 11 66 13 I3 I2 I4 66 Figure 1 I1 Accessories Programming cable for GAP 1605 GAP-TPH-CAB Communication Example Dupline(R) 12 12 G3800XXXX I1 I3 I2 I4 G34860058230 M 10 ax. 0 m G82864406703 Mode 868 MHz Power I1 I3 I2 I4 Dupline(R) RF Associate Disable G81864407703 2 Specifications are subject to change without notice (06.09.2006) Dupline(R) is a registered trademark. A product of the CARLO GAVAZZI Group