AB, ADD, AE, AK, AKC, AN, AV Series Dip Solder and Pierced Eyelet Terminations SPECIFICATIONS ELECTRICAL MECHANICAL Phenolic, glass reinforced per Operating Voltage: 1800 Vdc (sea level) Contact Retention: 3 lbs. min. MIL-M-14, type MFH, U.L. 94V-0 Current Rating: 5 amp max. Insertion Force: 2 to 16 oz. per approved, color black Dielectric Withstanding Voltage: opposing contact pair when using Thermoplastic Polyester, glass rein- 1800 Vrms min. .062 (1.57) steel test blade forced, U.L. 94V-0 approved, color black msulation Resistance: Withdrawal Force: 1 oz. min. per CONTACTS: megohms min. opposing contact pair when using Copper allo 7 . y, gold plated per MIL-G Voltage Drop: 30 mV max. .054 (1.37) steel test blade 45204, Type It Grade C, peer nickel TEMPERATURE RANGE MATERIALS INSERTS: Dially! Phthalate & Phenolic: INSULATOR: . -65'C to +125C (-85F to +257F) : Stainless steel, passivated Polyester: Dially! Pihalate, per Ml L-M-14, NOTE: i 105C. (-67 .L. 94V-0 approved, color green . 55C to +105C (-67F to +221F) app 9 All tests are in accordance with requirements of MIL-C-21097. CONTACT TERMINATIONS SINGLE ROW TERMINATIONS DUAL ROW TERMINATIONS 0s ACCEPTS 3 NO. 22 29 ve 48) o~ Sr 260 025 (5.56) LETTER ce (6. 35) (64) ; IDENTIFICATION .220 + 025 220 + 025 TI (.64) fe Se 59) (64) (ae cen ! DIP SOLDER PIERCED EYELET Lt wines CODES E, DD, V CODE N sigs mre 1 (3.96) (38) DIP SOLDER PIERCED EYELET CODE | __DIMENSION Oe ee) ate owstve CODE K CODE B 132 +025 (4.67) (38) E (3.35 + 64) . .195 + ,025 RIGHT ANGLE DIP SOLDER NOTE: _ DD (4.95 + 64} CODE KC All Dip Solder Terminations are .045 380 + .025 (1.14) diameter and fit .051 (1.29) Vv (8.65 + 64) mininimum diameter board hole. MOUNTING STYLES 112-40 @ 125 116 FLOAT BOBBIN f UNC: 28 yf (3.18) 2.95) ) pe , bas *e78) ef ty a THREADED INSERT THRU HOLE FLOAT MOUNT NO EARS TRANSVERSE THRU HOLE CODE 3 CODE 5 CODE 8 CODE 12 CODE 15 ORDERING INFORMATION 2 KT | 43 /2 A DD 5 Peo ee ion: Gontacls Slotted MOUNTING STYLES " etwe ( ) 3: Threaded Insert CONTACT PLATING _______] 5S: = Thru Hole KH: .000010 gold engagement and termination areas 8: Floating Mount KT:* 000010 gold engagement area; 12: a ae : No Ears .000100 min. tin lead termination area 15: Thru Hole Side Mount VH: .000030 gold engagement and termination areas CONTACT VN:* 000030 gold engagement area; .000010 gold termination area |______ TERMINATIONS VT:* .000030 gold engagement area; SINGLE ROW .000100 min. tin lead termination area (B, K Series only) *Not available on codes 8, E, K and KC terminations. n. Pierced Eyelet NUMBER OF CONTACT PAIRS Dip Solder 6, 10, 15, 18, 22, 36, 43 DUAL ROW ; (DD, E, KC, N, V Series only) INSULATOR MATERIAL N: Pierced Eyelet 1: Diallyl Phthalate (green); Standard with VH, VN, and VT platings E: Short Dip Solder Not available with KT or KH plating . : DD: Medium Dip solder 2: Polyester (black); Standard with KH, KT, VN, and VT platings Vv: : Not available with VH plating or B, K, and N terminations . . Long Dip Solder 9: Phenolic (black); Not available with KT plating KC: Right Angle Standard with code N termination ip Solder SERIES IDENTIFIER Standard options are indicated by bold italic type. A: .156 (3.96) Contact Centers; .062 (1.57) P.C. Board WB 90053576 GO000eb b10 26 Nonstandard items require a factory quotation for price and delivery..156 Contact Centers (3.96 mm) .156 x .145 grid and .156 Single Row Vikings full-bellows contact withstands repeated insertion and withdrawal of the mating p.c. board. Either pierced eyelet or dip solder terminations are available, with a .145" row spacing. Pierced eyelet contacts accommodate three #22 AWG wires and are replaceable using a simple hand tool. The low profile connector bodies feature between-contacts polarization, thermoset or ther- moplastic materials, and a variety of mounting styles. OUTLINE AND DIMENSIONS A .054-.071 RC. BOARD 7] (1.37)(1.80) __t 300 INSERTION DEPTH sy) @ SINGLE ROW 7 .054-.071 RC. BOARD ~ og tl (10.36) .219 t (5.56) | L_-asere - 148-2 010 TYR (8.68) (25) (3.96) DUAL ROW [o pe ec oO} SINGLE ROW | | Lea] [omo| fost hoact | ase [ao [ca famed Joo | DUAL ROW POLARIZATION Between-Contacts Polarizing Key Contact identification for Contact Identification for Contact Identification for Part No. 091-0024-000 6 thru 22 positions: 36 thru 43 positions: en single row connectors: f Numbers: 1, 2, 3.......22 Letters: A, B, C,.....2, A,.... Letters: A, B, C,....Z See page 34 for further Letters: A, B, C,.....2 Numbers: 1, 2, 3,......22,23.....43 Numbers: 1, 2, 3,.....22 information. Omit: G,1,0,Q Omit: G, |, O, Q, G,1,0,Q Omit: G,1,0,Q A B c D E E CONTACT FLOAT MTG ONLY POSITIONS +.005 +.007 +.010 +.005 +015 +.015 +005 (+.13) (+.18) (+.25) (4.13) (+.38) (+.38) (+.13) 6/12 .780 1.080 1.220 1.533 1.783 1.846 .330 (19.81) (27.43) (30.99) (38.94) (45.29) (46.89) (8.38) 10/20 1.404 1.704 1.844 2.157 2.407 2.470 .330 (35.66) (43.28) (46.84) (54.79) (61.14) (62.74) (8.38) 15/30 2.184 2.484 2.624 2.937 3.187 3.250 .330 (55.47) (63.09) (66.65) (74.60) (80.95) (82.55) (8.38) 18/36 2.652 2.952 3.092 3.405 3.655 3.718 .330 (67.36) (74.98) (78.54) (86.49) (92.84) (94.44) (8.38) 22/44 3.276 3.576 3.716 4.029 4.280 4.342 -330 (83.21) (90.83) (94.39) (102.34) (108.71) (110.29) (8.38) 36/72 5.460 5.760 .900 6.213 6.463 6.526 438 (138.68) (146.30) (149.86) (157.81) (164.16) (165.76) (11.13) 43/86 6.552 6.802 6.992 7.305 7.555 7.618 -500 (166.42) (172.77) (177.60) (185.55) (191.90) (193.50) (12.70) Note: Dimensions are in inches and (millimeters). Tolerance +.010(.25) unless otherwise specified. 25 M8 9005376 O0000eS 744Hoods with Cable Clamp Hoods are available for most Viking card-edge connectors with style 5 mounts and suitable contact termination lengths. They are molded in thermoplastic and feature an integral cable clamp for a right-angle cable outlet. The cable clamp has a screw adjustment and accommodates cable sizes from 3/16"(4.76) diameter to 3/8"(9.52) diameter. A hood assembly consists of two main parts, one of which "telescopes" into the other, thus fitting various lengths of connectors. Three different widths (Dim. "A") are available to suit the various connector series. The hood is secured with two self-tapping screws which are provided. Consult the table to find the correct hood part number for your connector series and size. OUTLINE AND DIMENSIONS 3/16" TO 3/8" CABLE OUTLET STELESCOPE 7] 1524 _ (4.76) _(9.52) AT THIS POINT ~y I (26.40) (ies) SL ye Oo \ expo spas alak CONNECTOR (REF) x x ~ (2) -@ J] | L Sa SSS SS See aeaes ~ MOUNTING HOLES @ PES) FOR NO. 4 LF TAPPING SCREWS ot 8 3 8 MOUNTING HOLE (SEE PAGE OF SERIES AND SIZE TO BE USED) CABLE CLAMP SCREW , 3 __t CABLE CLAMP. TE { 10 (2.79) SECTION X-X Connector Series OR Fernow Pathe Perhow batho Perkew patho. Ferkew_"batiNo LV, LZ 330 25-30 036-0097-004 40 036-0097-003 64 036-0097-002 JDD, JE, JN, JV 330 10 036-0097-004 15-25 036-0097-003 28-35 036-0097-002 36-50 036-0097-001 JND, JNK 375 18-25 036-0098-003 28-36 036-0098-002 40-50 036-0098-001 CDD, CE, CN,CV 330 10-18 036-0097-003 22-28 036-0097-002 31-50 036-0097-001 CND, CNK 375 10-18 036-0098-003 22-30 036-0098-002 31-50 036-0098-001 HNG -400 18 036-0099-002 28-31 036-0099-001 AB, ADD, AE, AK, AN, AV 330 6 036-0097-004 10-15 036-0097-003 18-22 036-0097-002 AMD, AMK, AND 400 22 036-0099-002 = 28-43 036-0099-001 Note: Dimensions are in inches and (millimeters). Tolerance +.010(.25) unless otherwise specified. $3 M@@ 9005376 0000033 450 aMost Viking card-edge connectors have the option of "between- contacts polarization or "in-contact polarization. Connectors with part number prefix "2" or "3" have grooves or slots between contacts into which the polarizing key is pressed. The appropriate "between-contacts" polarizing key is referenced on the data pages for each series. A Viking part number which Polarizing Keys does not have a prefix of "2" or "3" does not have the "between- contacts polarizing option. If "in-contact" polarizing is desired, a pair of contacts must be removed and replaced by a key as detailed below. Therefore, two circuits are removed in the case of dual "readout" connectors and one circuit is removed in the case of single row connectors. BETWEEN-CONTACTS IN-CONTACT All .100", .125" Contact Centers JDD, JE, JN, JV Series CODD, CE, CN, CV Series Part Number: 091-0071 -000 Material: Polyester Key is pressed into grooves between contacts. SLOT DIMENSIONS Part Number: 091 -0025-000 Material: GF Nylon Key replaces two opposing contacts. Key is pressed into empty contact cavities. A= .050(1.27) Li ION B 35018. 9) SLOT DIMENSIONS A= .070(1.77) B = .350(8.89) . JND, JNK Series al -156 CND, CNK Series ontact Centers AMD, AMK, AND Series and HNG Series Part Number: 091 -0051-000 Material: GF Nylon Key replaces two opposing Part Number: 091-0024-000 Material: GF Polyester Key is pressed into slots contacts. between contacts. Key is pressed into empty contact SLOT DIMENSIONS cavities. A = .050(1.27) SLOT DIMENSIONS B = .350(8.89) A= .070(1.77) B = .350(8.89) ADD, AE, AKC, AN, AV Series HN, HV Series Part Number: 091-0020-012 Material: Copper, Gold Plated Key replaces two opposing contacts. JDD, JE, JN, JV Series Tail is bent 90 after installation. CDD, CE, CN, CV Series SLOT DIMENSIONS A= .100(2.54) B = .350(8.89) Part Number: 091-0114-012 Material: Copper, Gold Plated Key replaces two opposing contacts. =A Tail is bent 90 after installation. t SLOT DIMENSIONS 8 A = .070(1.77) } B = .350(8.89) RECOMMENDED SLOT SIZE Contact Replacement Tools How To Replace Damaged Contacts Wire Wrap , Round Tail Dip Solder and Pierced Eyelet Contacts Only If a contact should become damaged and require replacement, spe- cial tools and replacement contacts are available. The technique and necessary tools are detailed below. Wire Wrap and Round Tail Dip Solder Series AMD, AMK, AND, CND, CNK, HNG, JND, JNK Vikings square wrap terminals and round tail dip solder terminals are retained in the insulator body by means of a press fit. 1. The use of an impact tool is suggested in removing the contact but other means can be used. Select the impact tool according to the chart. The impact tool slips over the tail of the damaged contact and is pushed firmly until the tool trips and drives the contact out. Pierced Eyelet Series AN, CN, HN, JN Vikings pierced eyelet terminals are retained in the insulator body by a dimple at the point where the tail enters the insulator. 1. Using the cut-off tool, cut off the tail at the "dimpled" area and remove the damaged contact. 2. insert a replacement contact into the empty cavity from the front of the connector until! it is completely seated. 3. While holding the contact in the seated position, place the dimple tool over the tail and squeeze to form a dimple on the flat metal at the base of the insulator. The dimple should preferably face out from the center of the connector. The dimple retains the contact in the insulator. 2. Insert a replacement contact into the empty cavity from the front of Ferced Replacement Cur oft Dimple the connector until the tail protrudes on the termination side. ; / ; AN 018-0906-002 115-0109-000 115-0108-000 3. Pull the tail using a pair of pliers until the contact is correctly seated CN 018-0905-002 115-0531-000 115-0532-000 and the tail is of equal length to the other contacts. HN 018-0028-002 115-0109-000 115-0108-000 Replacement Impact JN 018-0905-002 115-0533-000 115-0534-000 Wiw Replacement o/s Series Contact Series Contact Tool 018-1149-002 000407-0085 018-1151-002 000407-0085 000407-0093 JNK 018-1149-002 000407-0085 AMD, AND 018-1140-002 AMK CND 018-1141-002 CNK HNG 018-0526-002 JND 018-1140-002 == ~~ J :| Twist impact we Cut-Off eb + Tool Tool a Dimple Tool me 9005376 COO0034 757 34