CC-E Series
Features
Compact Footprint / Low Profi le
Through Hole or SMT Versions
5V, 12V, 24V & 48V Inputs
3.3 to 30V1 Single, ±12 to 15V Dual Outputs
Output Voltage Adjustment
Input - Output Isolation
RoHS Compliant
5 Year Warranty
Self contained
Multiple Input Voltage confi gurations
Open frame (no potting)
1.5-10W, Ultra Compact Single and Dual DC-DC Converters
1. For 24V/30V output - connnect across +Vout & -Vout and
leave “common out” pin not connected
2. Based upon equal load current from both outputs
3. For 15V output connect trim to -Vout
Model
Nominal Output Voltage V 3.3V 5V 12/15V ±12/15 (24/30)1
DC Input V 5V: 4.5-9.0V, 12V: 9-18V, 24V: 18-36V, 48V: 36-76V
Effi ciency % 71 to 90% model dependant
Output Voltage Tolerance % 1.5-10W: ±3%, 15-25W: ±5% ±5%
Output Adjustment (via trim pin) V 3.15-3.6V 4.75-6.0V 11.4-15V 22.8 - 30V
Line Regulation mV 20 40 80
Load Regulation mV 40 100 6002
Temperature Coeffi cient % <± 0.02%/°C
Preload - No preload required
Output Ripple (typ./max.BW 50MHz) mV 40/120 30/120
Overcurrent Protection - Output current limiting with automatic recovery
Overvoltage Protection - No
Remote On/ Off - CC1R5, 3, 6, & 10: RC terminal open, output is OFF;
RC terminal to -Vin (0-0.4V), output is ON
Operating Temp.- Convection °C -40 to 85°C, derates linearly to 40% load from 50°C to 85°C
Operating Temp.- Forced Air °C -40°C to 85°C with 1m/s air full load
Storage Temperature °C -40°C to 85°C
Humidity (non Condensing) - 95% RH max.(maximum wet-bulb temperature: 38°C)
Isolation Voltage - 500VAC 1 min. Input to output, input to case, output to case
Isolation Resistance - Input to output, input to case, output to case: 50M ohm min. (500VDC)
Shock m/s2 980m/s2 (100G) 6ms (6 directions, each 3 times)
Vibration (non Operating) - 10 to 55Hz (sweep for 15min) 1.52mm constant, 3 directions X, Y, Z each 2 hours
Safety Agency Approvals - IEC/EN/UL/CSA60950-1, IEC/EN/UL/CSA62368-1 and CE Mark
Weight g CC1R5: 3.2, CC3: 4.5, CC6: 5.8, CC10:10.0
Size (L x W x H) in CC1R5: 0.650 x 0.654 x 0.335; CC3: 0.900 x 0.654 x 0.335; CC6: 0.900 x 0.831 x 0.335
(DIP Through Hole and SMD package) CC10: 1.400 x 0.890 x 0.335
(SIP Through Hole only) CC3 (SIP): 1.09 x 0.362 x 0.705
Warranty yrs 5 years
Specifi cations
Key Market Segments & Applications