TLP361J
2010-10-01 1
TOSHIBA Photocoupler GaAs Ired & Photo-Triac
TLP361J
Triac Drivers
Programmable Controllers
AC-Output Modules
Solid State Relays
TOSHIBA TLP361J consists of a zero-voltage-crossing turn-on
photo-triac optically coupled to a gallium arsenide infrared-emitting diode
in a four-lead plastic DIP package.
• Peak off-state voltage: 600 V (Min.)
• Trigger LED current: 10 mA (Max.)
• On-state current: 100 mA (Max.)
• Isolation voltage: 5000 Vrms (Min.)
• Zero crossing Function
• UL recognized: UL1577, file No. E67349
•Option (D4) type
TÜV approved: DIN EN60747-5-2
Certificate No. R50033433
Maximum operating insulation voltage : 890 Vpk
Maximum permissible overvoltage : 8000 Vpk
(Note) When an EN60747-5-2 approved type is needed, please designate “Option (D4).”
•Construction mechanical rating
7.62 mm pitch
TLPXXX type
10.16 mm pitch
TLPXXX type
Creepage distance
Clearance
Insulation thickness
7.0 mm (min)
7.0 mm (min)
0.4 mm (min)
8.0 mm (min)
8.0 mm (min)
0.4 mm (min)
•Trigger LED current
*Example: “(IFT7)”; “TLP361J(IFT7)”
(Note) When specifying the application type name for certification testing, be sure to use the standard product
type name, e.g., TLP361J(IFT7): TLP361J
JEDEC
TOSHIBA 11-5B2
Weight: 0.26 g (typ.)
Trigger LED current (mA)
VT=3V, Ta=25°C
Classi
fication* Min. Max.
Marking of
classification
(IFT7) 7 T7
Standard 10 T7blank
Unit: mm
Pin Configuration (top view)
1: Anode
2: Cathode
3: Terminal1
4: Terminal2
1
23
4
ZC
TLP361J
2010-10-01 2
Absolute Maximum Ratings (Ta = 25°C)
Characteristic Symbol Rating Unit
Forward current IF 50 mA
Forward current derating (Ta 53°C) IF /°C 0.7 mA /°C
Peak forward current (100 μs pulse, 100 pps) IFP 1 A
Reverse voltage VR 5 V
LED
Junction temperature Tj 125 °C
Off-state output terminal voltage VDRM 600 V
Ta = 25°C 100
On-state RMS current
Ta = 70°C
IT(RMS)
50
mA
On-state current derating (Ta 25°C) IT/°C -1.1 mA /°C
Peak on-state current (100 μs pulse, 120 pps) ITP 2 A
Peak nonrepetitive surge current (Pw = 10 ms) ITSM 1.2 A
Detector
Junction temperature Tj 115 °C
Storage temperature range Tstg 55~125 °C
Operating temperature range Topr 40~100 °C
Lead soldering temperature (10s) Tsol 260 °C
Isolation voltage (AC, 1 min., R.H. 60%) (Note 1) BV
S 5000 Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Pins 1 and 2 are shorted together and pins 3 and 4 are shorted together.
Recommended Operating Conditions
Characteristic Symbol Min. Typ. Max. Unit
Supply voltage VAC 240 Vac
Forward current IF 15 20 25 mA
Peak on-state current ITP 1 A
Operating temperature Topr 25 — 85 °C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
TLP361J
2010-10-01 3
Electrical Characteristics (Ta = 25°C)
Characteristic Symbol Test Condition Min. Typ. Max. Unit
Forward voltage VF IF = 10 mA 1.0 1.15 1.3 V
Reverse current IR V
R = 5 V 10 μA
LED
Capacitance CT V = 0, f = 1 MHz 30 pF
Peak off-state current IDRM VDRM = 600 V 10 1000 nA
Peak on-state voltage VTM ITM = 100 mA 1.7 3.0 V
Holding current IH 0.6 mA
Critical rate of rise of
off-state voltage dv/dt Vin = 240 Vrms , Ta = 85°C (Note 2) 200 500 V/μs
Detector
Critical rate of rise of
commutating voltage dv/dt(c) Vin = 60 Vrms , IT = 1 5mA (Note 2) 0.2 V/μs
Coupled Electrical Characteristics (Ta = 25°C)
Characteristic Symbol Test Condition Min. Typ. Max. Unit
Trigger LED current IFT VT = 3 V 10 mA
Inhibit voltage VIH I
F = Rated IFT 20 V
Leakage in inhibited state IIH
IF = Rated IFT
VT = Rated VDRM 200 600 μA
Turn-on time tON
VD = 3 1.5 V , RL = 20 Ω
IF = Rated IFTΧ1.5 30 100 μs
Isolation Characteristics (Ta = 25°C)
Characteristic Symbol Test Condition Min. Typ. Max. Unit
Capacitance (input to output) CS VS = 0 , f = 1 MHz 0.8 pF
Isolation resistance RS V
S = 500 V, R.H. 60% 1×1012 1014 Ω
AC, 1 minute 5000
AC, 1 second, in oil 10000 Vrms
Isolation voltage BVS
DC, 1 minute, in oil 10000 Vdc
(Note 2): dv/dt test circuit
1
2
4
Vcc
+
-
Rin
120 Ω
Vin
3
RL
4k
Ω
dv/dt (c) dv/dt
0V
+5 V
Vc
TLP361J
2010-10-01 4
IFP – VFP
Pulse forward voltage VFP (V)
Pulse forward current IFP (mA)
1000
1
0.6
500
300
100
50
30
10
5
3
1.0 1.4 1.8 2.2 2.6
Pulse width 10 μs
Repetitive
Frequency = 100 Hz
Ta = 25 °C
IF – Ta
Ambient temperature Ta (°C)
Allowable forward current
IF (mA)
100
0
20
80
60
40
20
0 20 40 60 80 100 120
IF – VF
Forward voltage VF (V)
Forward current IF (mA)
100
0.1
0.6
50
30
10
5
3
1
0.5
0.3
0.8 1.0 1.2 1.4 1.6 1.8
Ta = 25 °C
Ambient temperature Ta (°C)
R.M.S on-stage current
IT (RMS) (mA)
IT (RMS) – Ta
200
0
160
120
80
40
20 0 20 40 60 80 100 120
Duty cycle ratio DR
Allowable pulse forward
current IFP (mA)
IFP – DR
10
3
3000
1000
500
300
100
50
30
103 3 102 3 101 3 100
Pulse width 100 μs
Ta = 25 °C
ΔVF/ΔTa – IF
Forward current IF (mA)
Forward voltage temperature
coefficient ΔVF/ΔTa (mV/°C)
2.8
0.4
0.3 0.1
0.8
1.2
1.6
2.0
2.4
1 3 10 30
3.2
0.5 5 50
*: The above graphs show typical characteristics.
TLP361J
2010-10-01 5
Normalized IH – Ta
Ambient temperature Ta (°C)
Holding current IH
(arbitrary unit)
3
0.1
40
2
1.2
0.5
20 0 20 40 60 80
1
0.3
100
Normalized IFT – Ta
Ambient temperature Ta (°C)
Trigger LED current IFT
(arbitrary unit)
3
0.1
40
2
1.2
0.5
20 0 20 40 60 80
1
0.3
100
VT = 3 V
Normalized VIH – Ta
Ambient temperature Ta (°C)
Inhibit voltage VIH
(arbitrary unit)
3
0.1
40
2
1.2
0.5
20 0 20 40 60 80
1
0.3
100
IF = Rated IFT
Normalized IIH – Ta
Ambient temperature Ta (°C)
Inhibit current IIH
(arbitrary unit)
3
0.1
40
2
1.2
0.5
20 0 20 40 60 80
1
0.3
100
IF = Rated IFT
VT = Rated VDRM
Normalized IDRM – Ta
Ambient temperature Ta (°C)
Peak off-state current IDRM
(arbitrary unit)
103
0
102
101
100
20 40 60 80 100
VDRM = Rated
Normalized VDRM – Ta
Ambient temperature Ta (°C)
Off-state output terminal voltage VDRM
(arbitrary unit)
0.2
1.4
1.2
0.8
0.4
1.0
0.6
40 20 0 20 40 60 80 100
*: The above graphs show typical characteristics.
TLP361J
2010-10-01 6
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SI GNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or
vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.