MMSZ2V4T1 Series Zener Voltage Regulators 500 mW SOD-123 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD-123 package. These devices provide a convenient alternative to the leadless 34-package style. http://onsemi.com Features * * * * * * 500 mW Rating on FR-4 or FR-5 Board Wide Zener Reverse Voltage Range - 2.4 V to 56 V Package Designed for Optimal Automated Board Assembly Small Package Size for High Density Applications ESD Rating of Class 3 (>16 kV) per Human Body Model Pb-Free Packages are Available 1 Cathode 2 Anode 2 Mechanical Characteristics 1 CASE: Void-free, transfer-molded, thermosetting plastic case FINISH: Corrosion resistant finish, easily Solderable MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: SOD-123 CASE 425 STYLE 1 260C for 10 Seconds POLARITY: Cathode indicated by polarity band FLAMMABILITY RATING: UL 94 V-0 MARKING DIAGRAM MAXIMUM RATINGS Rating Total Power Dissipation on FR-5 Board, (Note 1) @ TL = 75C Derated above 75C Symbol Max Unit 500 6.7 mW mW/C 1 PD Thermal Resistance, Junction-to-Ambient (Note 2) RqJA 340 C/W Thermal Resistance, Junction-to-Lead (Note 2) RqJL 150 C/W TJ, Tstg -55 to +150 C Junction and Storage Temperature Range Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. FR-5 = 3.5 X 1.5 inches. 2. Thermal Resistance measurement obtained via infrared Scan Method. xx M G G xx = Device Code M = Date Code G = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Device Package Shipping MMSZxxxT1 SOD-123 (Pb-Free) 3000/Tape & Reel MMSZxxxT3 SOD-123 (Pb-Free) 10,000/Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. DEVICE MARKING INFORMATION See specific marking information in the device marking column of the Electrical Characteristics table on page 3 of this data sheet. (c) Semiconductor Components Industries, LLC, 2006 Juanuary, 2006 - Rev. 9 1 Publication Order Number: MMSZ2V4T1/D MMSZ2V4T1 Series ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, VF = 0.95 V Max. @ IF = 10 mA) Symbol I IF Parameter VZ Reverse Zener Voltage @ IZT IZT Reverse Current ZZT Maximum Zener Impedance @ IZT IR Reverse Leakage Current @ VR VR Reverse Voltage IF Forward Current VF Forward Voltage @ IF VZ VR IR VF IZT Zener Voltage Regulator http://onsemi.com 2 V MMSZ2V4T1 Series ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA) VZ1 (Volts) (Notes 3 and 4) ZZT1 (Note 5) VZ2 (Volts) (Notes 3 and 4) @ IZT1 = 5 mA ZZT2 (Note 5) Max Reverse Leakage Current @ IZT2 = 1 mA IR @ VR Device Marking Min Nom Max W Min Max W mA Volts MMSZ2V4T1 T1 2.28 2.4 2.52 100 1.7 2.1 600 50 1 MMSZ2V7T1 T2 2.57 2.7 2.84 100 1.9 2.4 600 20 1 MMSZ3V0T1* T3 2.85 3.0 3.15 95 2.1 2.7 600 10 1 MMSZ3V3T1 T4 3.14 3.3 3.47 95 2.3 2.9 600 5 1 MMSZ3V6T1 T5 3.42 3.6 3.78 90 2.7 3.3 600 5 1 MMSZ3V9T1 U1 3.71 3.9 4.10 90 2.9 3.5 600 3 1 MMSZ4V3T1 U2 4.09 4.3 4.52 90 3.3 4.0 600 3 1 MMSZ4V7T1 U3 4.47 4.7 4.94 80 3.7 4.7 500 3 2 MMSZ5V1T1 U4 4.85 5.1 5.36 60 4.2 5.3 480 2 2 MMSZ5V6T1* U5 5.32 5.6 5.88 40 4.8 6.0 400 1 2 MMSZ6V2T1* V1 5.89 6.2 6.51 10 5.6 6.6 150 3 4 MMSZ6V8T1 V2 6.46 6.8 7.14 15 6.3 7.2 80 2 4 MMSZ7V5T1 V3 7.13 7.5 7.88 15 6.9 7.9 80 1 5 MMSZ8V2T1 V4 7.79 8.2 8.61 15 7.6 8.7 80 0.7 5 MMSZ9V1T1 V5 8.65 9.1 9.56 15 8.4 9.6 100 0.5 6 MMSZ10T1 A1 9.50 10 10.50 20 9.3 10.6 150 0.2 7 MMSZ11T1 A2 10.45 11 11.55 20 10.2 11.6 150 0.1 8 MMSZ12T1 A3 11.40 12 12.60 25 11.2 12.7 150 0.1 8 MMSZ13T1 A4 12.35 13 13.65 30 12.3 14.0 170 0.1 8 MMSZ15T1 A5 14.25 15 15.75 30 13.7 15.5 200 0.05 10.5 MMSZ16T1 X1 15.20 16 16.80 40 15.2 17.0 200 0.05 11.2 MMSZ18T1 X2 17.10 18 18.90 45 16.7 19.0 225 0.05 12.6 MMSZ20T1 X3 19.00 20 21.00 55 18.7 21.1 225 0.05 14 MMSZ22T1 X4 20.90 22 23.10 55 20.7 23.2 250 0.05 15.4 MMSZ24T1 X5 22.80 24 25.20 70 22.7 25.5 250 0.05 16.8 Device 3. The type numbers shown have a standard tolerance of 5% on the nominal Zener Voltage. 4. Tolerance and Voltage Designation: Zener Voltage (VZ) is measured with the Zener Current applied for PW = 1 ms. 5. ZZT and ZZK are measured by dividing the AC voltage drop across the device by the AC current applied. The specified limits are for IZ(AC) = 0.1 IZ(DC), with the AC frequency = 1 kHz. The "G" suffix indicates Pb-Free package available. *Not Available in the 10,000/Tape & Reel. http://onsemi.com 3 MMSZ2V4T1 Series ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA) VZ1 (Volts) (Notes 6 and 7) ZZT1 (Note 8) @ IZT1 = 2 mA Device Marking Min Nom Max MMSZ27T1 Y1 25.65 27 MMSZ30T1* Y2 28.50 MMSZ33T1 Y3 31.35 MMSZ36T1* Y4 MMSZ39T1* Y5 MMSZ43T1* MMSZ47T1 VZ2 (Volts) (Notes 6 and 7) ZZT2 (Note 8) Max Reverse Leakage Current @ IZT2 = 0.1 mA @ IZT2 = 0.5 mA IR @ VR W Min Max W mA Volts 28.35 80 25 28.9 300 0.05 18.9 30 31.50 80 27.8 32 300 0.05 21 33 34.65 80 30.8 35 325 0.05 23.1 34.20 36 37.80 90 33.8 38 350 0.05 25.2 37.05 39 40.95 130 36.7 41 350 0.05 27.3 Z1 40.85 43 45.15 150 39.7 46 375 0.05 30.1 Z2 44.65 47 49.35 170 43.7 50 375 0.05 32.9 MMSZ51T1* Z3 48.45 51 53.55 180 47.6 54 400 0.05 35.7 MMSZ56T1 Z4 53.20 56 58.80 200 51.5 60 425 0.05 39.2 Device 6. The type numbers shown have a standard tolerance of 5% on the nominal Zener Voltage. 7. Tolerance and Voltage Designation: Zener Voltage (VZ) is measured with the Zener Current applied for PW = 1 ms. 8. ZZT and ZZK are measured by dividing the AC voltage drop across the device by the AC current applied. The specified limits are for IZ(AC) = 0.1 IZ(DC), with the AC frequency = 1 kHz. The "G" suffix indicates Pb-Free package available. *Not Available in the 10,000/Tape & Reel. http://onsemi.com 4 MMSZ2V4T1 Series 8 7 VZ , TEMPERATURE COEFFICIENT (mV/C) VZ , TEMPERATURE COEFFICIENT (mV/C) TYPICAL CHARACTERISTICS TYPICAL TC VALUES FOR MMSZ2V4T1 SERIES 6 5 4 VZ @ IZT 3 2 1 0 -1 -2 -3 TYPICAL TC VALUES FOR MMSZ2V4T1 SERIES VZ @ IZT 10 1 2 3 4 5 6 7 8 9 10 11 12 10 100 VZ, NOMINAL ZENER VOLTAGE (V) VZ, NOMINAL ZENER VOLTAGE (V) Figure 1. Temperature Coefficients (Temperature Range - 55C to +150C) Figure 2. Temperature Coefficients (Temperature Range - 55C to +150C) 1000 Ppk , PEAK SURGE POWER (WATTS) 1.2 1.0 PD versus TL 0.8 0.6 PD versus TA 0.4 0.2 0 RECTANGULAR WAVEFORM, TA = 25C 100 10 1 0 25 50 75 100 125 150 0.1 1 10 100 1000 T, TEMPERATURE (C) PW, PULSE WIDTH (ms) Figure 3. Steady State Power Derating Figure 4. Maximum Nonrepetitive Surge Power 1000 1000 TJ = 25C IZ(AC) = 0.1 IZ(DC) f = 1 kHz 75 V (MMSZ5267BT1) 91 V (MMSZ5270BT1) IF, FORWARD CURRENT (mA) Z ZT, DYNAMIC IMPEDANCE ( ) 100 IZ = 1 mA 100 5 mA 20 mA 10 100 10 150C 1 75C 25C 0C 1 1 10 100 0.4 0.5 0.6 0.7 0.8 0.9 1.0 VZ, NOMINAL ZENER VOLTAGE VF, FORWARD VOLTAGE (V) Figure 5. Effect of Zener Voltage on Zener Impedance Figure 6. Typical Forward Voltage http://onsemi.com 5 1.1 1.2 MMSZ2V4T1 Series TYPICAL CHARACTERISTICS 1000 I R , LEAKAGE CURRENT (A) 1000 TA = 25C 0 V BIAS C, CAPACITANCE (pF) 1 V BIAS 100 BIAS AT 50% OF VZ NOM 10 100 10 1 +150C 0.1 0.01 + 25C 0.001 - 55C 0.0001 1 1 0.00001 100 10 0 10 20 30 40 50 60 VZ, NOMINAL ZENER VOLTAGE (V) Figure 7. Typical Capacitance Figure 8. Typical Leakage Current TA = 25C I Z , ZENER CURRENT (mA) TA = 25C I Z , ZENER CURRENT (mA) 80 100 100 10 1 0.1 0.01 70 VZ, NOMINAL ZENER VOLTAGE (V) 0 2 4 6 8 10 12 10 1 0.1 0.01 10 30 50 70 90 VZ, ZENER VOLTAGE (V) VZ, ZENER VOLTAGE (V) Figure 9. Zener Voltage versus Zener Current (VZ Up to 12 V) Figure 10. Zener Voltage versus Zener Current (12 V to 91 V) http://onsemi.com 6 90 MMSZ2V4T1 Series PACKAGE DIMENSIONS SOD-123 CASE 425-04 ISSUE E D AAAA AAAA NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. A A1 1 HE DIM A A1 b c D E HE L E MIN 0.037 0.000 0.020 --- 0.055 0.100 0.140 0.010 INCHES NOM 0.046 0.002 0.024 --- 0.063 0.106 0.145 --- MAX 0.053 0.004 0.028 0.006 0.071 0.112 0.152 --- STYLE 1: PIN 1. CATHODE 2. ANODE L 2 MILLIMETERS MIN NOM MAX 0.94 1.17 1.35 0.00 0.05 0.10 0.51 0.61 0.71 --- --- 0.15 1.40 1.60 1.80 2.54 2.69 2.84 3.56 3.68 3.86 --- --- 0.25 C b SOLDERING FOOTPRINT* EE EE EE 0.91 0.036 2.36 0.093 4.19 0.165 EE EE EE SCALE 10:1 1.22 0.048 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800-282-9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Phone: 81-3-5773-3850 Email: orderlit@onsemi.com http://onsemi.com 7 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. MMSZ2V4T1/D