FEATURES
● Low cost
● Diffused junction
● Ultra fast switching for high efficiency
● Low reverse leakage current
● Low forward voltage drop
● High current capability
● The plastic material carries UL recognition 94V-0
MECHANICAL DATA
●Case： Molded Plastic
●Polarity:Color band denotes cathode
●Weight: 0.003 ounces,0.093 grams
●Mounting position: Any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave ,60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
CHARACTERISTICS SYMBOLHS3ABHS3BBHS3DBHS3GBHS3JB HS3KBHS3MB UNIT
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward
Rectified Current @TA =55 ℃
Peak Forward Surage Current
8.3ms Single Half Sine-Wave
Super Imposed on Rated Load(JEDEC Method)
Peak Forward Voltage at 3.0A DC(Note1) VF1.3 V
Maximum DC Reverse Current @TJ=25℃
at Rated DC Blocking Voltage @TJ=100℃
Maximum Reverse Recovery Time(Note 1) TRR nS
Typical Junction Capacitance (Note2) CJpF
Typical Thermal Resistance (Note3) RθJA ℃/W
Operating Temperature Range TJ℃
Storage Temperature Range TSTG ℃
A
150
~ 111 ~
2.Measured at 1.0 MHz and applied reverse voltage of 4.0V DC
3.Thermal resistance junction to ambient
NOTES: 1.Measured with IF=0.5A，IR=1A ，IRR=0.25A
100
IR
I(AV)
REVERSE VOLTAGE - 50 to 1000
Volts
FORWARD CURRENT - 3.0 Amperes
HS3AB thru HS3MB
SURFACE MOUNT
GLASS HIGH EFFICIENCY RECTIFIERS
5.0
3.0
uA
-50 to +150
50 75
50 30
20
-50 to +150
IFSM A
1.0 1.7
SMB
.030(0.76)
.060(1.52)
.096(2.44)
.084(2.13)
.200(5.08)
.220(5.59) .008(.203)
.002(.051)
.006(.152)
.012(.305)
.160(4.06)
.185(4.70)
.130(3.30)
.155(3.94)
.083(2.11)
.075(1.91)
RATING AND CHARACTERTIC CURVES
HS3AB thru HS3MB
~ 112 ~
FIG. 1 – FORWARD CURRENT DERATING CURVE
AMBIENT TEMPERATURE (℃)
AVERAGE FORWARD CURRENT
AMPERES
1.0
025
2.0
3.0
50 75 100 125 150 175
0.5
1.5
2.5
SINGLE PHASE HALF WAVE 60Hz
RESISTIVE OR INDUCTIVE LOAD
FIG. 2 – MAXIMUM NON-REPETITIVE SURGE CURRENT
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE CURRENT
(AMPERES
）
SINGLE HALF-SINE-WAVE
(JEDEC METHOD)
200
150
100
50
0100
5020101 2 5
FIG.3 – TYPICAL JUNCTION CAPACITANCE
CAPACITANCE (pF)
REVERSE VOLTAGE (VOLTS)
1000
100
1
10
100
10
0.1 1.0
TJ = 25°C f = 1 MHz
HS3AB - HS3GB
HS3JB - HS3MB
FIG.4-TYPICAL FORWARD CHARACTERISTICS
INSTANTANEOUS FORWARD CURRENT
(AMPERES)
INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
HS3JB-HS3MB
HS3AB - HS3DB
HS 3GB
TJ = 25°C
PULSE WIDTH 300us
1.0
10
0.1
100
0 0.2 0.4 0.6 0.8 1.2 1.61.4
1.0 1.8
