Mini-Circuits - Specification for Transformer - TCM16-ED8391/1 RF Transformer Configuration Type: TCM16-ED8391/1 Insertion Loss Frequency 3 dB 2 dB 1 dB MHz RATIO MHz MHz MHz 16 0.17-75 - - - Case Style Connection DB714 4i Notes: Pin Connections Primary Primary Second- Second- Second- Gnd Case Not * FOR A AND B CONFIGURATIONS: Port Primary Typical Amplitude Unbalance: 0.1 dB over 1 dB frequency Dot CT ary Dot ary ary CT Ext. Gnd Used range; 0.5 dB over entire frequency range. 4i 4 6 1 3 2 5 Typical Phase Unbalance: 1.0 over 1 dB frequency range; 5.0 over entire frequency range. * Non-catalog model. Please consult factory for price and delivery. * General Quality Control Procedures and Environmental Specifications are given in Mini-Circuits Guarantees Quality. Hi-Rel, MIL description are given in Hi-Rel and MIL * Prices and Specifications subjects to change without notice. FREQ. Insertion Input Return (MHz) Loss(dB) Loss(dB) Case Style - DB714 (inch,mm ) weight: 0.15 grams. A B C D E F G H J .160 .150 .160 .050 .040 .025 .028 .065 .190 4.064 3.810 4.064 1.270 1.016 0.635 0.711 1.651 4.826 K L M N P Q R S T .030 0.762 2.000 1.09 13.99 5.000 0.87 15.12 10.000 0.82 15.35 30.000 0.87 15.03 50.000 0.90 14.41 100.000 1.05 12.56 150.000 1.36 10.70 200.000 1.43 9.02 250.000 2.01 7.65 280.000 2.11 6.95 Tolerance: .x .1 .xx .03 .xxx .015 inch. Material and Finish: Case material: plastic. Lead finish: tin-lead plate or tin plate. Packaging: http://www.minicircuits.com/cgi-bin/spec?cat=tranfrmr&model=TCM16-ED8391/1&pix=db714.gif&bv=4 (1 of 2) [7/9/2004 11:36:27 PM] Mini-Circuits - Specification for Transformer - TCM16-ED8391/1 Packaging information: Tape Width(mm): 12 Reel Size(inches): 13 Device Cavity Pitch(mm): 8 Devices Per Reel: 2000 Back http://www.minicircuits.com/cgi-bin/spec?cat=tranfrmr&model=TCM16-ED8391/1&pix=db714.gif&bv=4 (2 of 2) [7/9/2004 11:36:27 PM] i2 Technologies US, Inc. 15445 Innovation Drive San Diego, CA 92128 i2 Technologies US, Inc. HTML Pages converted to PDF Document This document contain component information from the manufacturer's website which are not available in a revision controlled document from the manufacturer. To facilitate the addition of these parts into the Electronics Database, we are converting the HTML pages related to that part, from the manufacturer's website into Adobe PDF format. The contents of this document is based on the information provided on the manufacturer's website, therefore the information may have been changed by the manufacturer since this was created. Powering the Bottom Line (R)