F-219 (Rev 23JUL19) ERM8-030-02.0-L-DV-S-TR ERM8-010-05.0-L-DV-K-EGPS-TR ERM8-030-05.0-L-DV-EGPS-TR (0.80 mm) .0315" ERM8-S SERIES RUGGED HIGH-SPEED SHIELDED HEADER Board Mates: See "Mated Height" Chart (Note: ERF8-S does not mate with ERM8-EGPS) SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?ERM8 Insulator Material: Black LCP Terminal Material: Phosphor Bronze Plating: Au or Sn over 50 " (1.27 m) Ni Current Rating: 2.2 A per per pin (2 pins powered) Operating Temp Range: -55 C to +125 C Voltage Rating: 225 VAC / 318 VDC RoHS Compliant: Yes (1.50 mm) .059" NOMINAL WIPE 10 YEAR MFG WITH 30 " GOLD EXTENDED LIFE PRODUCT HIGH MATING CYCLES Shielded HIGH-SPEED CHANNEL PERFORMANCE ERM8/ERF8 @ 7 mm Mated Stack Height PROCESSING Rating based on Samtec reference channel. For full SI performance data visit Samtec.com or contact SIG@samtec.com Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max (010-030) POSITIONS PER ROW ERM8 RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality POWER/SIGNAL APPLICATION LEAD STYLE -05.0 -09.0 ERM8-02.0-S to ERF8-05.0-S LEAD STYLE = 5 mm (-EGPS & -DSS only) (9.87) .389 (10.81) .425 (13.87) .546 (14.81) .583 Compatible with UMPT/UMPS for flexible two-piece power/signal solutions 01 NO. OF POSITIONS C D -10.0 (14.00) .551 (22.00) .866 (26.00) 1.024 (30.00) 1.181 (16.36) .644 (24.36) .959 (28.36) 1.117 (32.36) 1.274 -20.0 -25.0 -30.0 Notes: Patented Some lengths, styles and options are non-standard, non-returnable. = Differential Pair with Extended Guide Post Shield -05.0 & -09.0 lead style only (-10 & -025 positions only) -K -S OPTION (3.25) .128 (7.20) .283 (3.20) .126 02 A (1.07) .042 (0.25) .010 -DSS (5.97) .235 -EGPS = No. of Positions x (0.80) .0315 + (XX.XX) .XXX TR = Extended Guide Post Shield (-05.0 & -09.0 lead style only) (7.18) .283 No. of Positions x (0.80) .0315 + (6.00) .236 OTHER OPTION -EGPS = 30 " (0.76 m) Gold on contact, Matte Tin on tail = 9 mm (-EGPS & -DSS only) ERM8-09.0-EGPS to ERF8-07.0-EGPS -S -S -09.0 (0.80) .0315 (1.32) .052 DIA (1.10) (1.32) .043 x .052 C (0.18) .007 = (4.00 mm) .157" DIA Polyimide Film Pick & Place Pad (Not available in -02.0 lead style) B (5.95) .220 -EGPS OR -DSS OPTION -P = Pick & Place Pad (-02.0 & -05.0 lead style only) D Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM 16 mm ERM8-05.0-EGPS to ERF8-07.0-EGPS = Shield (-02.0 style only) = 10 " (0.25 m) Gold on contact, Matte Tin on tail -05.0 B DV -L = 2 mm (-S only) A ERM8-02.0-S to ERF8-07.0-EGPS PLATING OPTION -02.0 -010, -020, -025, -030 FILE NO. E111594 MATED HEIGHT 9 mm 12 mm 7 mm All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. -TR = Tape & Reel Packaging