60W Constant Current Mode LED Driver LPF-60D series IP67 File Name:LPF-60D-SPEC 2020-02-14 LPF-60D 60W Constant Current Mode LED Driver series SPECIFICATION LPF-60D-12 LPF-60D-15 LPF-60D-20 LPF-60D-24 LPF-60D-30 LPF-60D-36 LPF-60D-42 LPF-60D-48 LPF-60D-54 MODEL DC VOLTAGE RATED CURRENT RATED POWER OUTPUT CURRENT TOLERANCE 5.0% SETUP, RISE TIME Note.6 1000ms, 80ms / 115VAC HOLD UP TIME (Typ.) 16ms/230VAC Note.5 30V 2A 60W 36V 1.67A 60.12W 42V 1.43A 60.06W 48V 1.25A 60W 54V 1.12A 60.48W 12 ~ 20V 14.4 ~ 24V 18 ~ 30V 21.6 ~ 36V 25.2 ~ 42V 28.8 ~ 48V 32.4 ~ 54V 90% 90% 90% 90% 46 ~ 54V 54 ~ 63V 59 ~ 66V 500ms, 80ms / 230VAC 16ms/115VAC 90 ~ 305VAC 127 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section) 47 ~ 63Hz POWER FACTOR TOTAL HARMONIC DISTORTION THD< 20%(@load60%/115VC,230VAC; @load75%/277VAC) (Please refer to "TOTAL HARMONIC DISTORTION(THD)" section) EFFICIENCY (Typ.) 86% 88% 87% 0.8A / 115VAC 0.4A / 230VAC LEAKAGE CURRENT OVER CURRENT SHORT CIRCUIT OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. MAX. CASE TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 89% 0.32A/277VAC 90% COLD START 55A(twidth=270s measured at 50% Ipeak) at 230VAC; Per NEMA 410 8 units (circuit breaker of type B) / 14 units (circuit breaker of type C) at 230VAC <0.75mA / 240VAC 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed. 15 ~ 17V 17.5 ~ 21V 23 ~ 27V 28 ~ 35V 34 ~ 40V 41 ~ 49V Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover Tcase=-40 ~ +80 (Please refer to " OUTPUT LOAD vs TEMPERATURE" section) Tcase=+80 20 ~ 95% RH non-condensing -40 ~ +80, 10 ~ 95% RH 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Note.8 UL8750, CSA C22.2 No. 250.0-08, ENEC EN61347-1, EN61347-2-13 independent, EN62384, EAC TP TC 004 , IP67, J61347-1, J61347-2-13, GB19510.1,GB19510.14 approved ; design refer to UL60950-1, TUV EN60950-1 SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC I/P-O/P:3.75KVAC EMC EMISSION Note.8 I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55015,EN61000-3-2 Class C (@load60%) ; EN61000-3-3,GB17743 and GB17625.1,EAC TP TC 020 EMC IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Line 2KV),EAC TP TC 020 1202.9K hrs min. Telcordia SR-332 (Bellcore) ; 396.7Khrs min. MIL-HDBK-217F (25) DIMENSION 162.5*43*32mm (L*W*H) 0.45Kg; 32pcs/15.4Kg/0.93CUFT PACKING NOTE 24V 2.5A 60W PF0.97/115VAC, PF0.95/230VAC, PF0.92/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) MAX. No. of PSUs on 16A CIRCUIT BREAKER OTHERS 20V 3A 60W FREQUENCY RANGE AC CURRENT INRUSH CURRENT(Typ.) PROTECTION 15V 4A 60W 9 ~ 15V CONSTANT CURRENT REGION Note.2 7.2 ~12V 5.0% max. @rated current CURRENT RIPPLE VOLTAGE RANGE INPUT Note.5 12V 5A 60W File Name:LPF-60D-SPEC 2020-02-14 LPF-60D 60W Constant Current Mode LED Driver series BLOCK DIAGRAM fosc : 100KHz I/P EMI FILTER & RECTIFIERS POWER SWITCHING PFC CIRCUIT RECTIFIERS & FILTER +V -V DIM+ DIM- O.L.P. O.L.P. PWM & PFC CONTROL DETECTION CIRCUIT O.V.P. DRIVING METHODS OF LED MODULE This series works in constant current mode to directly drive the LEDs. In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. 100 Vo(%) Constant Current area Should there be any compatibility issues, please contact MEAN WELL. 60 (min.) Hiccup Protection 50 100 Io(%) Typical output current normalized by rated current (%) File Name:LPF-60D-SPEC 2020-02-14 LPF-60D 60W Constant Current Mode LED Driver series DIMMING OPERATION 3 in 1 dimming function AC/N(Blue) AC/L(Brown) +V(Red) -V(Black) DIM+(Blue) DIM-(White) LPF-60D Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 1 ~ 10VDC, or 10V PWM signal or resistance. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 1 0 0A (typ.) Applying additive 1 ~ 10VDC 100% -V + + - - DIM+ + Output current (%) 90% +V 80% 70% 60% 50% 40% Additive Voltage - 30% DIM- 20% 10% 1V "DO NOT connect "DIM- to -V" 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): 100% -V + + - - DIM+ Output current (%) 90% +V 80% 70% 60% 50% 40% Additive PWM signal 30% DIM- 20% 10% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input "DO NOT connect "DIM- to -V" Applying additive resistance: 100% -V + 90% + - - DIM+ Additive Resistance Output current (%) +V 80% 70% 60% 50% 40% DIM"DO NOT connect "DIM- to -V" 30% 20% 10% 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity for synchronized dimming operation) Dimming input: Additive resistance File Name:LPF-60D-SPEC 2020-02-14 LPF-60D 60W Constant Current Mode LED Driver series Note: In the case of turning the lighting fixture down to 0% brightness, please refer to the configuration as follow, or please contact MEAN WELL for other options. N L Switch Relay Adjuster 10K/N~100K/N Ohms resistance 1~10V DC Voltage 10V PWM Signal Brown Blue AC/L AC/N LPF-60D DIM+ DIMV(-) V(+) Blue White Black Red LED Lighting Fixture Using a switch and relay can turn ON/OFF the lighting fixture. File Name:LPF-60D-SPEC 2020-02-14 LPF-60D 60W Constant Current Mode LED Driver series OUTPUT LOAD vs TEMPERATURE 100 100 80 80 230VAC Input only 60 60 LOAD (%) 50 LOAD (%) 230VAC Input only 40 20 -40 -30 0 15 30 40 50 60 40 20 -40 70 (HORIZONTAL) -30 -15 AMBIENT TEMPERATURE,Ta () 0 15 30 50 65 80 (HORIZONTAL) Tcase () STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC Tcase at 70 100 90 0 0 0 0 0 0 0 0 0 80 PF LOAD (%) 70 60 50 0 0 0 0 0 0 40 90 100 125 135 145 155 165 175 180 200 230 305 INPUT VOLTAGE (V) 60Hz 1 .9 9 .9 8 .9 7 .9 6 .9 5 .9 4 .9 3 .9 2 .9 1 0 .9 .8 9 .8 8 .8 7 .8 6 .8 5 .8 4 277VAC 230VAC 115VAC 50% 100% EFFICIENCY vs LOAD 28% 26% 24% 22% 20% 18% 16% 14% 12% 10% 8% 6% 4% 2% 0% 277VAC 230VAC 115VAC 80% 90% 100% EFFICIENCY(%) THD 90% LPF-60D series possess superior working efficiency that up to 90% can be reached in field applications. 48V Model, Tcase at 70 48V Model, Tcase at 70 70% 80% LOAD TOTAL HARMONIC DISTORTION (THD) 60% 70% (60W) De-rating is needed under low input voltage. 50% 60% 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 277VAC 230VAC 115VAC 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD LOAD File Name:LPF-60D-SPEC 2020-02-14 LPF-60D 60W Constant Current Mode LED Driver series LIFE TIME 120 100 LIFETIME(Kh) 80 60 40 20 0 20 30 40 50 60 70 80 Tcase ( ) File Name:LPF-60D-SPEC 2020-02-14 LPF-60D 60W Constant Current Mode LED Driver series MECHANICAL SPECIFICATION CASE NO.: LPF-60B Unit:mm 162.5 30020 3.6 3.6 3.5 30020 60 Style 2464 18AWGx2C(+V,-V) Style 2464 22AWGx2C(DIM+,DIM-) +V(Red) -V(Black) DIM+(Blue) DIM-(White) : Max. Case Temperature 32 tc tc 13 3.5 SJOW 17AWGx2C & H05RN-F 2x1.0mm 2 43 AC/N(Blue) AC/L(Brown) 3.5 3.5 Recommend Mounting Direction INSTALLATION MANUAL Please refer to : http://www.meanwell.com/manual.html File Name:LPF-60D-SPEC 2020-02-14