1N4678
THRU
1N4711
500mW Silicon
Zener Diodes
Features
• Zener Voltage 1.8V to 27V
• Metallurgically bonded
Maximum Ratings*
Symbol Value Units
Max. Steady State Power
Dissipation at
TL<75OC, Lead Length=3/8” PD 500 mW
Junction Temperature TJ 150 oC
Storage Temperature Range TSTG -55 to 150 oC
Electrical Characteristics @ 25°C Unless Otherwise Specified
Symbol Maximum Unit
Max. Forward Voltage
@ IF=100mA VF 1.5 V
NOTE:
1) Some part number series have lower JEDEC registered
ratings.
Mechanical Data
• Case: Double slug type, hermetically sealed glass
• Polarity: Cathode indicated by polarity band
DO-35
DIMENSIONS
INCHES MM
DIM MIN MAX MIN MAX NOTE
A--- .166 --- 4.2
B--- .079 --- 2.00
C--- .020 --- .52
D1.000 --- 25.40 ---
A
B
C
D
D
Cathode
Mark
omponents
20736 Marilla Street Chatsworth
!"#
$% !"#
MCC
www.mccsemi.com
Revision: 3 2002/12/31
Electrical Characteristics (TL= 30 OC Unless Otherwise Noted, VF=1.5V Max @ IF=100mA for all types)
Zener Voltage (2) Leakage Current (3)
VZ (Volts) @ IZT IR @ VR IZM (4) ÄVZ (5)
Device (1) Device
Marking Min Nom Max uA uA Max Volts mA Volts
1N4678 1N4678 1.71 1.8 1.89 50 7.5 1.0 120 0.7
1N4679 1N4679 1.90 2.0 2.10 50 5.0 1.0 110 0.7
1N4680 1N4680 2.09 2.2 2.31 50 5.0 1.0 100 0.75
1N4681 1N4681 2.28 2.4 2.52 50 2.0 1.0 95 0.8
1N4682 1N4682 2.565 2.7 2.835 50 1.0 1.0 90 0.85
1N4683 1N4683 2.85 3.0 3.15 50 0.8 1.0 85 0.9
1N4684 1N4684 3.135 3.3 3.465 50 7.5 1.5 80 0.95
1N4685 1N4685 3.42 3.6 3.78 50 7.5 2.0 75 0.95
1N4686 1N4686 3.705 3.9 4.095 50 5.0 2.0 70 0.97
1N4687 1N4687 4.085 4.3 4.515 50 4.0 2.0 65 0.99
1N4688 1N4688 4.465 4.7 4.935 50 10 3.0 60 0.99
1N4689 1N4689 4.845 5.1 5.355 50 10 3.0 55 0.97
1N4690 1N4690 5.32 5.6 5.88 50 10 4.0 50 0.96
1N4691 1N4691 5.89 6.2 6.51 50 10 5.0 45 0.95
1N4692 1N4692 6.46 6.8 7.14 50 10 5.1 35 0.9
1N4693 1N4693 7.125 7.5 7.875 50 10 5.7 31.8 0.75
1N4694 1N4694 7.79 8.2 8.61 50 1.0 6.2 29 0.5
1N4695 1N4695 8.265 8.7 9.135 50 1.0 6.6 27.4 0.4
1N4696 1N4696 8.645 9.1 9.555 50 1.0 6.9 26.2 0.08
1N4697 1N4697 9.50 10 10.5 50 1.0 7.6 24.8 0.1
1N4698 1N4698 10.45 11 11.55 50 0.05 8.4 21.6 0.11
1N4699 1N4699 11.40 12 12.6 50 0.05 9.1 20.4 0.12
1N4700 1N4700 12.35 13 13.65 50 0.05 9.8 19 0.13
1N4701 1N4701 13.30 14 14.7 50 0.05 10.6 17.5 0.14
1N4702 1N4702 14.25 15 15.75 50 0.05 11.4 16.3 0.15
1N4703 1N4703 15.20 16 16.8 50 0.05 12.1 15.4 0.16
1N4704 1N4704 16.15 17 17.85 50 0.05 12.9 14.5 0.17
1N4705 1N4705 17.10 18 18.9 50 0.05 13.6 13.2 0.18
1N4707 1N4707 19.00 20 21 50 0.01 15.2 11.9 0.2
1N4711 1N4711 25.65 27 28.35 50 0.01 20.4 8.8 0.27
Note:
1) Tolerance and type number designation (VZ)
The type numbers listed have a standard tolerance of ±5% on the nominal zener voltage.
2) Zener voltage (VZ) measurement
The zener voltage is measured with the device junction in the thermal equilibrium at the lead
temperature (TL) at 30OC ± 1OC and 3/8” lead length.
3) Reverse leakage current (IR)
Reverse leakage currents are guaranteed and measured at VR shown on the table.
4) Maximum zener current rating (IZM)
Maximum zener current ratings are based on maximum zener voltage of the individual units and
JEDEC 250mW rating.
5) Maximum voltage change (ÄVZ)
Voltage change is equal to the difference between VZ at 100uA and at 10uA
MCC
1N4678 thru 1N4711
www.mccsemi.com
Revision: 3 2002/12/31
+12
+10
+8
+6
+4
+2
0
-2
-4 2345 6789101112
VZ, ZENER VOLTAGE (VOLTS)
Figure 1. Range for Units to 12 Volts
VZ@IZT
(NOTE 2)
RANGE
100
70
50
30
20
10
7
5
3
2
1
2 3 4 5 6 7 8 9 10 11 12 10 20 30 50 70 100
VZ, ZENER VOLTAGE (VOLTS)
Figure 2. Range for Units 12 to 100 Volts
RANGE VZ@IZ(NOTE 2)
120 130 140 150 160 170 180 190 200
200
180
160
140
120
100
VZ, ZENER VOLTAGE (VOLTS)
Figure 3. Range for Units 120 to 200 Volts
VZ@IZT
(NOTE 2)
+6
+4
+2
0
-2
-4
3 4 56 78
VZ, ZENER VOLTAGE (VOLTS)
Figure 4. Effect of Zener Current
NOTE: BELOW 3 VOLTS AND ABOVE 8 VOLTS
NOTE: CHANGES IN ZENER CURRENT DO NOT
NOTE: AFFECT TEMPERATURE COEFFICIENTS
1mA
0.01mA
VZ@IZ
TA=25°C
1000
C, CAPACITANCE (pF)
500
200
100
50
20
10
5
2
1
1 2 5 10 20 50 100
VZ, ZENER VOLTAGE (VOLTS)
Figure 5. Typical Capacitance 2.4–100 Volts
TA=25°C
0V BIAS
1V BIAS
50% OF
VZBIAS
100
70
50
30
20
10
7
5
3
2
1
120 140 160 180 190 200 220
VZ, ZENER VOLTAGE (VOLTS)
Figure 6. Typical Capacitance 120–200 Volts
TA=25°C
1VOLTBIAS
50% OF VZBIAS
0 BIAS
θVZ, TEMPERATURE COEFFICIENT (mV/°C)
20mA
C, CAPACITANCE (pF) θVZ, TEMPERATURE COEFFICIENT (mV/°C)θVZ, TEMPERATURE COEFFICIENT (mV/°C)
θVZ, TEMPERATURE COEFFICIENT (mV/°C)
MCC
1N4678 thru 1N4711
www.mccsemi.com
Version: 3 2002/12/31
100
70
50
30
20
10
7
5
3
2
1
0.01 0.02 0.05 0.1 0.2 0.5 1 2 5 10 20 50 100 200 500 1000
Ppk , PEAK SURGE POWER (WATTS)
PW, PULSE WIDTH (ms)
5% DUTY CYCLE
10% DUTY CYCLE
20% DUTY CYCLE
11V-91V NONREPETITIVE
1.8V-10V NONREPETITIVE
RECTANGULAR
WAVEFORM
TJ=25°C PRIOR TO
INITIAL PULSE
Figure 7. Maximum Surge Power 1.8–91 Volts
1000
700
500
300
200
100
70
50
30
20
10
7
5
3
2
1
0.01 0.1 1 10 100 1000
Ppk , PEAK SURGE POWER (WATTS)
PW, PULSE WIDTH (ms)
Figure 8. Maximum Surge Power DO-204AH
100–200 Volts
1000
500
200
100
50
20
10
1
2
5
0.1 0.2 0.5 1 2 5 10 20 50 100
IZ, ZENER CURRENT (mA)
Figure 9. Effect of Zener Current on
Zener Impedance
ZZ, DYNAMIC IMPEDANCE (OHMS)
ZZ, DYNAMIC IMPEDANCE (OHMS)
1000
700
500
200
100
70
50
20
10
7
5
2
1
1 2 3 5 7 10 20 30 50 70 100
VZ, ZENER VOLTAGE (VOLTS)
Figure 10. Effect of Zener Voltage on Zener ImpedanceFigure 11. Typical Forward Characteristics
RECTANGULAR
WAVEFORM, TJ=25°C
100-200VOLTS NONREPETITIVE
TJ=25°C
iZ(rms)=0.1 IZ(dc)
f=60Hz
IZ=1mA
5mA
20mA
TJ=25°C
iZ(rms)=0.1 IZ(dc)
f=60Hz
VZ=2.7V
47V
27V
6.2V
VF, FORWARD VOLTAGE (VOLTS)
0.4 0.5 0.6 0.7 0.8 0.9 1 1.1
1000
500
200
100
50
20
10
5
2
1
IF, FORWARD CURRENT (mA)
MINIMUM
MAXIMUM
150°C
75°C
0°C
25°C
MCC
1N4678 thru 1N4711
www.mccsemi.com
Revision: 3 2002/12/31
