5.0mm x 5.0mm FULL-COLOR SURFACE MOUNT LED LAMP Part Number: AAAF5051-03 Blue Reddish-Orange Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z Chips can be controlled separately. The Blue source color devices are made with InGaN z Suitable for all SMT assembly and solder process. on Al2O3 substrate Light Emitting Diode. z Available on tape and reel. This devices are made with AlGaInP. z White SMD package, silicone resin. The Green source color devices are made with InGaN z Package: 500pcs / reel. on Al2O3 substrate Light Emitting Diode. z Moisture sensitivity level : level 3. Static electricity and surge damage the LEDS. z RoHS compliant. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15[0.006]unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 1 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4.1. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter of the nozzle should be as large as possible. 4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. 5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances. SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 2 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942 Selection Guide Part No. Dice Lens Type Blue (InGaN) AAAF5051-03 WATER CLEAR Reddish-Orange (AlGaInP) Green (InGaN) Iv (mcd) [2] @ 150mA*120mA v (mlm) [2] @ 150mA*120mA Min. Typ. Min. Typ. 700 1300 3500 5000 *7500 *9600 *7200 *10000 4700 6500 14000 20000 Viewing Angle [1] 21/2 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity with asterisk is measured at 120mA. Absolute Maximum Ratings at Ta=25C Parameter Power dissipation Junction temperature Symbol Device Blue 0.6 PD Reddish-Orange 0.336 Green 0.6 Blue 140 Reddish-Orange 140 Green 140 TJ Value Unit Test Conditions W IF=150mA IF=120mA IF=150mA C IF=150mA IF=120mA IF=150mA -40 To +85 C IF=150mA IF=120mA IF=150mA -40 To +85 C IF=150mA IF=120mA IF=150mA mA IF=150mA IF=120mA IF=150mA mA IF=150mA IF=120mA IF=150mA C/W IF=150mA IF=120mA IF=150mA C/W IF=150mA IF=120mA IF=150mA uA VR=5V Blue Operating Temperature Top Reddish-Orange Green Blue Storage Temperature Tstg Reddish-Orange Green DC Forward Current [1] Peak Forward Current [2] Thermal resistance Thermal resistance Reverse Current IF IFM Rth j-a Rth j-s IR Blue 150 Reddish-Orange 120 Green 150 Blue 300 Reddish-Orange 300 Green 300 Blue 230 Reddish-Orange 300 Green 220 Blue 30 Reddish-Orange 50 Green 35 Blue 10 Reddish-Orange 10 Green 10 Notes: 1. Results from mounting on Aluminum Board. 2. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 3 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942 Electrical / Optical Characteristics at Ta=25C Value Parameter Symbol Device Unit Min. Wavelength at peak emission IF=150mA Typ. Blue 445 Reddish-Orange 633 Wavelength at peak emission IF=150mA Green 515 Dominant Wavelength IF=150mA Blue 450 Reddish-Orange 624 Dominant Wavelength IF=150mA Green 525 Spectral Line Half-width IF=150mA Blue 20 Reddish-Orange 30 Green 30 Wavelength at peak emission IF=120mA Dominant Wavelength IF=120mA Spectral Line Half-width IF=120mA peak dom [1] 1/2 Spectral Line Half-width IF=150mA Forward Voltage IF=150mA Forward Voltage IF=120mA Forward Voltage IF=150mA VF [2] 4.0 Reddish-Orange 2.0 2.3 2.8 Green 3.0 3.5 4.0 5 Green 5 Blue 0.12 Reddish-Orange 0.09 Temperature coefficient of peak IF=150mA, -10 C T100 C Green 0.13 Temperature coefficient of dom IF=150mA, -10 C T100 C Blue 0.1 Reddish-Orange 0.03 Temperature coefficient of dom IF=150mA, -10 C T100 C Green 0.11 Temperature coefficient of VF IF=150mA, -10 C T100 C Blue -2.3 Reddish-Orange -2.7 Green -3.9 Temperature coefficient of peak IF=120mA, -10 C T100 C Temperature coefficient of dom IF=120mA, -10 C T100 C Temperature coefficient of VF IF=120mA, -10 C T100 C TC peak TC dom TCV Temperature coefficient of VF IF=150mA, -10 C T100 C nm 3.5 5 Temperature coefficient of peak IF=150mA, -10 C T100 C nm 3.0 Blue VR nm Blue Reddish-Orange Reverse Voltage Max. V V nm/ C nm/ C mV/ C Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.2V. SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 4 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942 AAAF5051-03 Blue SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 5 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942 Reddish-orange SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 6 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942 Green SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 7 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942 AAAF5051-03 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Reel Dimension Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 8 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942 PACKING & LABEL SPECIFICATIONS AAAF5051-03 SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 9 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942