SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 1 OF 9
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942
5.0mm x 5.0mm FULL-COLOR SURFACE
MOUNT LED LAMP
Part Number: AAAF5051-03
Blue
Reddish-Orange
Green
Features
zChips can be controlled separately.
zSuitable for all SMT assembly and solder process.
zAvailable on tape and reel.
zWhite SMD package, silicone resin.
zPackage: 500pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The Blue source color devices are made with InGaN
on Al2O3 substrate Light Emitting Diode.
This devices are made with AlGaInP.
The Green source color devices are made with InGaN
on Al2O3 substrate Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15[±0.006]unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 2 OF 9
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4.1. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diame-
ter of the nozzle should be as large as possible.
4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 3 OF 9
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity with asterisk is measured at 120mA.
Selection Guide
Notes:
1. Results from mounting on Aluminum Board.
2. 1/10 Duty Cycle, 0.1ms Pulse Width.
Absolute Maximum Ratings at Ta=25°C
Part No. Dice Lens Type
Iv (mcd) [2]
@ 150mA*120mA
V
iewing
Angle [1]
Min. Typ.
Min. Typ. 2θ1/2
AAAF5051-03
Blue (InGaN)
WATER CLEAR
700 1300
3500 5000
120°
Reddish-Orange (AlGaInP) *7500 *9600 *7200 *10000
Green (InGaN) 4700 6500 14000 20000
Φv (mlm) [2]
@ 150mA*120mA
Parameter Symbol Device Value Unit Test Conditions
Power dissipation PD
Blue 0.6
W
IF=150mA
IF=120mA
IF=150mA
Reddish-Orange 0.336
Green 0.6
Junction temperature TJ
Blue 140
°C IF=150mA
IF=120mA
IF=150mA
Reddish-Orange 140
Green 140
Operating Temperature Top
Blue
-40 To +85 °C
IF=150mA
IF=120mA
IF=150mA
Reddish-Orange
Green
Storage Temperature Tstg
Blue
-40 To +85 °C
IF=150mA
IF=120mA
IF=150mA
Reddish-Orange
Green
DC Forward Current [1] IF
Blue 150
mA
IF=150mA
IF=120mA
IF=150mA
Reddish-Orange 120
Green 150
Peak Forward Current [2] IFM
Blue 300
mA
IF=150mA
IF=120mA
IF=150mA
Reddish-Orange 300
Green 300
Thermal resistance Rth j-a
Blue 230
°C/W IF=150mA
IF=120mA
IF=150mA
Reddish-Orange 300
Green 220
Thermal resistance Rth j-s
Blue 30
°C/W IF=150mA
IF=120mA
IF=150mA
Reddish-Orange 50
Green 35
Reverse Current IR
Blue 10
VR=5V
Reddish-Orange 10
Green 10
uA
SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 4 OF 9
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942
Electrical / Optical Characteristics at Ta=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.2V.
Parameter Symbol Device
Value
Unit
Min. Typ. Max.
Wavelength at peak emission
IF=150mA
λpeak
Blue 445
nm
Wavelength at peak emission
IF=120mA Reddish-Orange 633
Wavelength at peak emission
IF=150mA Green 515
Dominant Wavelength
IF=150mA
λdom [1]
Blue 450
nm
Dominant Wavelength
IF=120mA Reddish-Orange 624
Dominant Wavelength
IF=150mA Green 525
Spectral Line Half-width
IF=150mA
Δλ1/2
Blue 20
nm
Spectral Line Half-width
IF=120mA Reddish-Orange 30
Spectral Line Half-width
IF=150mA Green 30
Forward Voltage IF=150mA
VF [2]
Blue 3.0 3.5 4.0
V Forward Voltage IF=120mA Reddish-Orange 2.0 2.3 2.8
Forward Voltage IF=150mA Green 3.0 3.5 4.0
Reverse Voltage VR
Blue 5
Reddish-Orange 5
Green 5
Temperature coefficient of λpeak
IF=150mA, -10 °C≤ T≤100 °C
TC λpeak
Blue 0.12
nm/°C
Temperature coefficient of λpeak
IF=120mA, -10 °C≤ T≤100 °C Reddish-Orange 0.09
Temperature coefficient of λpeak
IF=150mA, -10 °C≤ T≤100 °C Green 0.13
Temperature coefficient of λdom
IF=150mA, -10 °C≤ T≤100 °C
TC λdom
Blue 0.1
nm/°C
Temperature coefficient of λdom
IF=120mA, -10 °C≤ T≤100 °C Reddish-Orange 0.03
Temperature coefficient of λdom
IF=150mA, -10 °C≤ T≤100 °C Green 0.11
Temperature coefficient of VF
IF=150mA, -10 °C≤ T≤100 °C
TCV
Blue -2.3
mV/°C
Temperature coefficient of VF
IF=120mA, -10 °C≤ T≤100 °C Reddish-Orange -2.7
Temperature coefficient of VF
IF=150mA, -10 °C≤ T≤100 °C Green -3.9
V
SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 5 OF 9
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942
AAAF5051-03
Blue
SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 6 OF 9
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942
Reddish-orange
SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 7 OF 9
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942
Green
SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 8 OF 9
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942
AAAF5051-03
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Reel Dimension
SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 9 OF 9
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942
PACKING & LABEL SPECIFICATIONS AAAF5051-03
