TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com - High Reliability controlled devices - Economical series for thru hole mounting - Unidirectional (A) and Bidirectional (CA) construction - Selections for 5.8 V to 324 V standoff voltages (VWM) Unidirectional and Bidirectional Transient Voltage Suppressor DEVICES M1.5KE6.8A thru M1.5KE400CA, e3 LEVELS M, MA, MX, MXL FEATURES High reliability controlled devices with wafer fabrication and assembly lot traceability 100 % surge tested devices Suppresses transients up to 1500 watts @ 10/1000 s Optional upscreening available by replacing the M prefix with MA, MX or MXL. These prefixes specify various screening and conformance inspection options based on MIL-PRF-19500. Refer to MicroNote 129 for more details on the screening options. Surface mount equivalent packages are available as MSMC(G)(J)5.0A - SMC(G)(J)170CA (consult factory for other surface mount options) Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B RoHS Compliant devices available by adding "e3" suffix 3 lot norm screening performed on Standby Current ID CASE 1 APPLICATIONS / BENEFITS Protection from switching transients and induced RF Protection from ESD and EFT per IEC 61000-4-2 and IEC 61000-4-4 with fast response Secondary lightning protection per IEC 61000-4-5 with 42 Ohms source impedance: o Class 1: M1.5KE6.8A to M1.5KE200CA o Class 2: M1.5KE5.0A to M1.5KE180CA o Class 3: M1.5KE5.0A to M1.5KE91CA o Class 4: M1.5KE5.0A to M1.5KE43CA Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: o Class 1 : M1.5KE5.0A to M1.5KE110CA o Class 2: M1.5KE5.0A to M1.5KE56CA o Class 3: M1.5KE5.0A to M1.5KE27ACA o Class 4: M1.5KE5.0A to M1.5KE13CA Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance: o Class 2: M1.5KE5.0A to M1.5KE24CA o Class 3: M1.5KE5.0A to M1.5KE12CA MAXIMUM RATINGS Peak Pulse Power dissipation at 25 C: 1500 watts at 10/1000 s (also see Figures 1, 2, and 3) with impulse repetition rate (duty factor) of 0.01 % or less tclamping (0 volts to VBR min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional Operating and Storage temperature: -65 C to +150 C Thermal Resistance: 22 C/W junction to lead at 3/8 inch (10 mm) from body, or 82 C/W junction to ambient when mounted on FR4 PC board with 4 mm 2 copper pads (1oz) and track width 1 mm, length 25 mm Steady-State Power dissipation: 5 watts at TL = 40 C, or 1.52 watts at TA = 25C when mounted on FR4 PC board described for thermal resistance Forward Surge: 200 Amps peak impulse of 8.3 ms half-sine wave at 25C (unidirectional only). Solder temperatures: 260 C for 10 s (maximum) RF01008 Rev C, September 2010 High Reliability Product Group Page 1 of 4 TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com ___________________________________________________________________________________________________________________________________ MECHANICAL AND PACKAGING Void-free transfer molded thermosetting epoxy body meeting UL94V-0 Tin-Lead (90 % Sn, 10 % Pb) or RoHS (100% Sn) Compliant annealed matte-Tin plating readily solderable per MIL-STD-750, method 2026 Body marked with part number Cathode indicated by band. No cathode band on bi-directional devices. Available in bulk or custom tape-and-reel packaging TAPE-AND-REEL standard per EIA-296 (add "TR" suffix to part number) WEIGHT: 1.5 gram (approximate) PACKAGE DIMENSIONS NOTE: Cathode indicated by band All dimensions in inches millimeters SYMBOLS & DEFINITIONS Symbol VWM PPP VBR ID Definition Symbol Working Peak (Standoff) Voltage Peak Pulse Power Breakdown Voltage Standby Current RF01008 Rev C, September 2010 IPP VC IBR Definition Peak Pulse Current Clamping Voltage Breakdown Current for VBR High Reliability Product Group Page 2 of 4 TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com ___________________________________________________________________________________________________________________________________ ELECTRICAL CHARACTERISTICS @ 25oC Industry Type Number (Note 2) JEDEC Type Number M1.5KE6.8A M1.5KE7.5A M1.5KE8.2A M1.5KE9.1A 1N6267A 1N6268A 1N6269A 1N6270A M1.5KE10A M1.5KE11A M1.5KE12A M1.5KE13A M1.5KE15A M1.5KE16A M1.5KE18A M1.5KE20A M1.5KE22A M1.5KE24A M1.5KE27A M1.5KE30A M1.5KE33A M1.5KE36A M1.5KE39A M1.5KE43A M1.5KE47A M1.5KE51A M1.5KE56A M1.5KE62A M1.5KE68A M1.5KE75A M1.5KE82A M1.5KE91A M1.5KE100A M1.5KE110A M1.5KE120A M1.5KE130A M1.5KE150A M1.5KE160A M1.5KE170A M1.5KE180A M1.5KE200A M1.5KE220A M1.5KE250A M1.5KE300A M1.5KE350A M1.5KE400A 1N6271A 1N6272A 1N6273A 1N6274A 1N6275A 1N6276A 1N6277A 1N6278A 1N6279A 1N6280A 1N6281A 1N6282A 1N6283A 1N6284A 1N6285A 1N6286A 1N6287A 1N6288A 1N6289A 1N6290A 1N6291A 1N6292A 1N6293A 1N6294A 1N6295A 1N6296A 1N6297A 1N6298A 1N6299A 1N6300A 1N6301A 1N6303A - Rated Standoff Voltage VWM (Note 1) Breakdown Voltage VBR @ IBR Maximum Clamping Voltage VC @ IPP Maximum Standby Current ID @ VWM Peak Pulse Current (see Fig. 2) IPP Maximum Temperature Coefficient of VBR (V(BR)) o V 5.80 6.40 7.02 7.78 V 6.45 - 7.14 7.13 - 7.88 7.79 - 8.61 8.65 - 9.55 mA 10 10 10 1 V 10.5 11.3 12.1 13.4 A 1000 500 200 50 A 143.0 132.0 124.0 112.0 %/ C .057 .061 .065 .068 8.55 9.40 10.220 11.10 12.80 13.60 15.30 17.10 18.80 20.50 23.10 25.60 28.20 30.80 33.30 36.80 40.20 43.60 47.80 53.00 58.10 64.10 70.10 77.80 85.50 94.00 102.00 111.00 128.00 136.00 145.00 154.00 171.00 185.00 214.00 256.00 300.00 324.00 9.50 - 10.50 10.50 - 11.60 11.40 - 12.60 12.40 - 13.70 14.30 - 15.80 15.20 - 16.80 17.10 - 18.90 19.00 - 21.00 20.90 - 23.10 22.80 - 25.20 25.70 - 28.40 28.50 - 31.50 31.40 - 34.70 34.20 - 37.80 37.10 - 41.00 40.90 - 45.20 44.70 - 49.40 48.50 - 53.60 53.20 - 58.80 58.90 - 65.10 64.60 - 71.40 71.30 - 78.80 77.90 - 86.10 86.50 - 95.50 95.00 - 105.00 105.00 - 116.00 114.00 - 126.00 124.00 - 137.00 143.00 - 158.00 152.00 - 168.00 162.00 - 179.00 171.00 - 189.00 190.00 - 210.00 209.00 - 231.00 237.00 - 263.00 285.00 - 315.00 332.00 - 368.00 380.00 - 420.00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 246.0 274.0 328.0 344.0 414.0 482.0 548.0 10 5 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 103.0 96.0 90.0 82.0 71.0 67.0 59.5 54.0 49.0 45.0 40.0 36.0 33.0 30.0 28.0 25.3 23.2 21.4 19.5 17.7 16.3 14.6 13.3 12.0 11.0 9.9 9.1 8.4 7.2 6.8 6.4 6.1 5.5 4.6 5.0 5.0 4.0 4.0 .073 .075 .078 .081 .084 .086 .088 .090 .092 .094 .096 .097 .098 .099 .100 .101 .101 .102 .103 .104 .104 .105 .105 .106 .106 .107 .107 .107 .108 .108 .108 .108 .108 .110 .110 .111 .111 .111 NOTE 1: Normal selection criteria for TVS devices is by rated stand-off voltage (VWM) and should be equal or greater than dc or continuous peak operating voltage. NOTE 2: For bidirectional construction, indicate a CA as suffix after part number (e.g. M1.5KE33CA). For Bidirectional types having VWM of 8 volts and under, the ID leakage current is doubled. Bidirectional capacitance is half that shown in Figure 4 at zero volts. NOTE 3: For unidirectional, the forward voltage (VF) is 3.5 volts maximum at 100 Amps peak for 8.3 ms half-sine wave. RF01008 Rev C, September 2010 High Reliability Product Group Page 3 of 4 TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com ___________________________________________________________________________________________________________________________________ GRAPHS Pulse Time (tw) in s Peak Pulse Power (PPP) or continuous Power in Percent of 25oC Rating FIGURE 1 - Peak Pulse Power vs. Pulse Time (tw) in s FIGURE 2 Pulse Wave Form TL Lead Temperature oC FIGURE 3 Derating Curve RF01008 Rev C, September 2010 High Reliability Product Group FIGURE 4 Typical Capacitance vs. Breakdown Voltage Page 4 of 4