TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
RF01008 Rev C, September 2010 High Reliability Product Group Page 1 of 4
DEVICES M1.5KE6.8A thru M1.5KE400CA, e3
LEVELS
M, MA, MX, MXL
FEATURES
High reliability controlled devices with wafer fabrication and assembly lot traceability
100 % surge tested devices
Suppresses transients up to 1500 watts @ 10/1000 µs
Optional upscreening available by replacing the M prefix with MA, MX or MXL. These prefixes specify
various screening and conformance inspection options based on MIL-PRF-19500. Refer to MicroNote
129 for more details on the screening options.
Surface mount equivalent packages are available as MSMC(G)(J)5.0A - SMC(G)(J)170CA
(consult factory for other surface mount options)
Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B
RoHS Compliant devices available by adding “e3” suffix
3σ lot norm screening performed on Standby Current ID
APPLICATIONS / BENEFITS
Protection from switching transients and induced RF
Protection from ESD and EFT per IEC 61000-4-2 and IEC 61000-4-4 with fast response
Secondary lightning protection per IEC 61000-4-5 with 42 Ohms source impedance:
o Class 1: M1.5KE6.8A to M1.5KE200CA
o Class 2: M1.5KE5.0A to M1.5KE180CA
o Class 3: M1.5KE5.0A to M1.5KE91CA
o Class 4: M1.5KE5.0A to M1.5KE43CA
Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance:
o Class 1 : M1.5KE5.0A to M1.5KE110CA
o Class 2: M1.5KE5.0A to M1.5KE56CA
o Class 3: M1.5KE5.0A to M1.5KE27ACA
o Class 4: M1.5KE5.0A to M1.5KE13CA
Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance:
o Class 2: M1.5KE5.0A to M1.5KE24CA
o Class 3: M1.5KE5.0A to M1.5KE12CA
MAXIMUM RATINGS
Peak Pulse Power dissipation at 25 ºC: 1500 watts at 10/1000 μs (also see Figures 1, 2, and 3) with
impulse repetition rate (duty factor) of 0.01 % or less
tclamping (0 volts to VBR min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional
Operating and Storage temperature: -65 ºC to +150 ºC
Thermal Resistance: 22 ºC/W junction to lead at 3/8 inch (10 mm) from body, or 82 ºC/W junction to
ambient when mounted on FR4 PC board with 4 mm2 copper pads (1oz) and track width 1 mm, length 25
mm
Steady-State Power dissipation: 5 watts at TL = 40 ºC, or 1.52 watts at TA = 25ºC when mounted on FR4
PC board described for thermal resistance
Forward Surge: 200 Amps peak impulse of 8.3 ms half-sine wave at 25ºC (unidirectional only).
Solder temperatures: 260 ºC for 10 s (maximum)
CASE 1
Unidirectional and Bidirectional
Transient Voltage Suppressor
- High Reliability controlled devices
- Economical series for thru hole mounting
- Unidirectional (A) and Bidirectional (CA) construction
- Selections for 5.8 V to 324 V standoff voltages (VWM)
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
___________________________________________________________________________________________________________________________________
RF01008 Rev C, September 2010 High Reliability Product Group Page 2 of 4
MECHANICAL AND PACKAGING
Void-free transfer molded thermosetting epoxy body meeting UL94V-0
Tin-Lead (90 % Sn, 10 % Pb) or RoHS (100% Sn) Compliant annealed matte-Tin plating readily solderable per
MIL-STD-750, method 2026
Body marked with part number
Cathode indicated by band. No cathode band on bi-directional devices.
Available in bulk or custom tape-and-reel packaging
TAPE-AND-REEL standard per EIA-296 (add “TR” suffix to part number)
WEIGHT: 1.5 gram (approximate)
PACKAGE DIMENSIONS
SYMBOLS & DEFINITIONS
Symbol
Symbol
Definition
VWM
IPP
Peak Pulse Current
PPP
VC
Clamping Voltage
VBR
IBR
Breakdown Current for VBR
ID
NOTE: Cathode indicated by band
All dimensions in inches
millimeters
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
___________________________________________________________________________________________________________________________________
RF01008 Rev C, September 2010 High Reliability Product Group Page 3 of 4
ELECTRICAL CHARACTERISTICS @ 25oC
Industry Type
Number
(Note 2)
JEDEC
Type
Number
Rated
Standoff
Voltage
VWM
(Note 1)
Breakdown
Voltage
VBR @ IBR
Maximum
Clamping
Voltage
VC @ IPP
Maximum
Standby
Current
ID @ VWM
Peak Pulse
Current
(see Fig. 2)
IPP
Maximum
Temperature
Coefficient of
VBR
(V(BR))
V
V
mA
V
A
A
%/oC
M1.5KE6.8A
M1.5KE7.5A
1N6267A
1N6268A
5.80
6.40
6.45 7.14
7.13 7.88
10
10
10.5
11.3
1000
500
143.0
132.0
.057
.061
M1.5KE8.2A
M1.5KE9.1A
1N6269A
1N6270A
7.02
7.78
7.79 8.61
8.65 9.55
10
1
12.1
13.4
200
50
124.0
112.0
.065
.068
M1.5KE10A
M1.5KE11A
1N6271A
1N6272A
8.55
9.40
9.50 10.50
10.50 11.60
1
1
14.5
15.6
10
5
103.0
96.0
.073
.075
M1.5KE12A
M1.5KE13A
1N6273A
1N6274A
10.220
11.10
11.40 12.60
12.40 13.70
1
1
16.7
18.2
5
5
90.0
82.0
.078
.081
M1.5KE15A
M1.5KE16A
1N6275A
1N6276A
12.80
13.60
14.30 15.80
15.20 16.80
1
1
21.2
22.5
1
1
71.0
67.0
.084
.086
M1.5KE18A
M1.5KE20A
1N6277A
1N6278A
15.30
17.10
17.10 18.90
19.00 21.00
1
1
25.2
27.7
1
1
59.5
54.0
.088
.090
M1.5KE22A
M1.5KE24A
1N6279A
1N6280A
18.80
20.50
20.90 23.10
22.80 25.20
1
1
30.6
33.2
1
1
49.0
45.0
.092
.094
M1.5KE27A
M1.5KE30A
1N6281A
1N6282A
23.10
25.60
25.70 28.40
28.50 31.50
1
1
37.5
41.4
1
1
40.0
36.0
.096
.097
M1.5KE33A
M1.5KE36A
1N6283A
1N6284A
28.20
30.80
31.40 34.70
34.20 37.80
1
1
45.7
49.9
1
1
33.0
30.0
.098
.099
M1.5KE39A
M1.5KE43A
1N6285A
1N6286A
33.30
36.80
37.10 41.00
40.90 45.20
1
1
53.9
59.3
1
1
28.0
25.3
.100
.101
M1.5KE47A
M1.5KE51A
1N6287A
1N6288A
40.20
43.60
44.70 49.40
48.50 53.60
1
1
64.8
70.1
1
1
23.2
21.4
.101
.102
M1.5KE56A
M1.5KE62A
1N6289A
1N6290A
47.80
53.00
53.20 58.80
58.90 65.10
1
1
77.0
85.0
1
1
19.5
17.7
.103
.104
M1.5KE68A
M1.5KE75A
1N6291A
1N6292A
58.10
64.10
64.60 71.40
71.30 78.80
1
1
92.0
103.0
1
1
16.3
14.6
.104
.105
M1.5KE82A
M1.5KE91A
1N6293A
1N6294A
70.10
77.80
77.90 86.10
86.50 95.50
1
1
113.0
125.0
1
1
13.3
12.0
.105
.106
M1.5KE100A
M1.5KE110A
1N6295A
1N6296A
85.50
94.00
95.00 105.00
105.00 116.00
1
1
137.0
152.0
1
1
11.0
9.9
.106
.107
M1.5KE120A
M1.5KE130A
1N6297A
1N6298A
102.00
111.00
114.00 126.00
124.00 137.00
1
1
165.0
179.0
1
1
9.1
8.4
.107
.107
M1.5KE150A
M1.5KE160A
1N6299A
1N6300A
128.00
136.00
143.00 158.00
152.00 168.00
1
1
207.0
219.0
1
1
7.2
6.8
.108
.108
M1.5KE170A
M1.5KE180A
1N6301A
1N6303A
145.00
154.00
162.00 179.00
171.00 189.00
1
1
234.0
246.0
1
1
6.4
6.1
.108
.108
M1.5KE200A
M1.5KE220A
-
171.00
185.00
190.00 210.00
209.00 231.00
1
1
274.0
328.0
1
1
5.5
4.6
.108
.110
M1.5KE250A
M1.5KE300A
-
214.00
256.00
237.00 263.00
285.00 315.00
1
1
344.0
414.0
1
1
5.0
5.0
.110
.111
M1.5KE350A
M1.5KE400A
-
300.00
324.00
332.00 368.00
380.00 420.00
1
1
482.0
548.0
1
1
4.0
4.0
.111
.111
NOTE 1:
Normal selection criteria for TVS devices is by rated stand-off voltage (VWM) and should be equal or greater than dc
or continuous peak operating voltage.
NOTE 2:
For bidirectional construction, indicate a CA as suffix after part number (e.g. M1.5KE33CA). For Bidirectional types
having VWM of 8 volts and under, the ID leakage current is doubled. Bidirectional capacitance is half that shown in
Figure 4 at zero volts.
NOTE 3:
For unidirectional, the forward voltage (VF) is 3.5 volts maximum at 100 Amps peak for 8.3 ms half-sine wave.
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
___________________________________________________________________________________________________________________________________
RF01008 Rev C, September 2010 High Reliability Product Group Page 4 of 4
GRAPHS
Pulse Time (tw) in s
Peak Pulse Power (PPP) or continuous
Power in Percent of 25oC Rating
FIGURE 1 Peak Pulse Power vs. Pulse Time (tw) in µs
FIGURE 2 Pulse Wave Form
TL Lead Temperature oC
FIGURE 3 Derating Curve
FIGURE 4 Typical Capacitance vs.
Breakdown Voltage