86
Features
Timer modules for use in conjunction with
relay & socket.
86.00 - Multi-function & multi-voltage
timer module
•Timer module for 90 and 92 series
sockets
•Wide supply voltage range (12 - 240 V)
•LED indicator
see 60 and 62 series relays
Note: Do not use with relays 62.3x.x012.x300 and 62.3x.x012.x600
12…240
12…240
1.2
10.2…265
10.2…265
(0.05...1)s, (0.5…10)s, (5…100)s, (0.5…10)min, (5…100)min, (0.5…10)h, (5…100)h
±1
≤50
50
±5
see 60 and 62 series relays
–20…+50
IP 20
86 Series - Timer modules
wiring diagram wiring diagram
without signal START with signal START
86.00
AI: ON delay
DI: ON pulse
SW: Symmetrical recycling: ON start
•Time scale: from 0.05s to 100 h
•Multi-function
•Plug-in for use with 90.02, 90.03 and 92.03
sockets
Contact specification
Contact configuration
Rated current/Maximum peak current A
Rated voltage/Maximum switching voltage V AC
Rated load AC1 VA
Rated load AC15 (230 V AC) VA
Single phase motor rating (230 V AC) kW
Breaking capacity DC1: 30/110/220 V A
Minimum switching load mW (V/mA)
Standard contact material
Supply specification
Nominal voltage (UN) V AC (50/60 Hz)
V DC
Rated power AC/DC W
Operating range V AC (50/60 Hz)
DC
Technical data
Specified time range
Repeatability %
Recovery time ms
Minimun control impulse ms
Setting accuracy full range %
Electrical life at rated load in AC1 cycles
Ambient temperature range °C
Protection category
Approvals (according to type)
A1A2 B1
S
U
L/+N/–
A1A2 B1
U
L/+N/–
10,5
38
54
6,3
relay +socket relay +socket
35.5
21.6
420.4
33.5
26.9
81.1
90.03 + 60.13 + 86.00
86.00
181
BE: Signal OFF delay
CE: Signal ON & OFF delay
DE: Signal ON pulse
EE: Signal OFF pulse
FE: Signal ON delay + OFF pulse
86
Features
Timer modules for use in conjunction with
relay & socket.
86.10 - ON delay timer module
86.20 - ON pulse timer module
•Timer module for 90, 92, 94 and 95
series sockets
•LED indicator
see 40, 44, 55, 60 and 62 series relays see 40, 44, 55, 60 and 62 series relays
12…24 12…24
12…24 (non polarized) 12…24 (non polarized)
150 150
(0.8...1.1)UN(0.8...1.1)UN
(0.8...1.1)UN(0.8...1.1)UN
(1.5…15)s,(6…60)s,(0.8…8)min,(6.4…64)min (1.5…15)s,(6…60)s,(0.8…8)min,(6.4…64)min
±1 ±1
≤150 ≤150
——
±5 ±5
see 40, 44, 55, 60 and 62 series relays see 40, 44, 55, 60 and 62 series relays
0…+50 0…+50
IP 20 IP 20
182
L/+N/-
A1A2
L/+N/-
A1A2
UU
10.5
34
15.8
86.10 86.20
AI: ON delay DI: ON pulse
•Mono-function
•Plug-in for use with 90.02, 90.03, 92.03,
94.02, 94.03, 94.04, 95.03, 95.05 sockets
•Mono-function
•Plug-in for use with 90.02, 90.03, 92.03,
94.02, 94.03, 94.04, 95.03, 95.05 sockets
Contact specification
Contact configuration
Rated current/Maximum peak current A
Rated voltage/Maximum switching voltage V AC
Rated load AC1 VA
Rated load AC15 (230 V AC) VA
Single phase motor rating (230 V AC) kW
Breaking capacity DC1: 30/110/220 V A
Minimum switching load mW (V/mA)
Standard contact material
Supply specification
Nominal voltage (UN) V AC (50/60 Hz)
V DC
Rated power AC/DC mW
Operating range AC
DC
Technical data
Specified time range
Repeatability %
Recovery time ms
Minimum control impulse ms
Setting accuracy-full range %
Electrical life at rated load in AC1 cycles
Ambient temperature range °C
Protection category
Approvals (according to type)
wiring diagram wiring diagram
without signal START without signal START
86 Series - Timer modules
relay +socket relay +socket
32
32
=
76
60.9
35.4 =
95.05 + 40.52 + 86.10
86.10 , 86.20
183
86 Series - Timer modules
Example: 86 series multi-function timer module, (12...240)V AC/DC supply voltage.
Ordering information
Number of poles Relay type Socket type Timer module
1 40.31 95.03 86.10/86.20
1 40.61 95.05 86.10/86.20
2 40.52/44.52/44.62 95.05 86.10/86.20
2 55.32 94.02 86.10/86.20
2 60.12 90.02 86.00/86.10/86.20
2 62.32 92.03 86.00/86.10/86.20
3 55.33 94.03 86.10/86.20
3 60.13 90.03 86.00/86.10/86.20
3 62.33 92.03 86.00/86.10/86.20
4 55.34 94.04 86.10/86.20
Time scales
Type 86.10
Type 86.20
Type 86.00
EMC specifications
Type of test Reference standard 86.00 86.10/20
Electrostatic discharge contact discharge EN 61000-4-2 4 kV n.a.
air discharge EN 61000-4-2 8 kV 8 kV
Radio-frequency electromagnetic field (80 ÷ 1000 MHz) EN 61000-4-3 10 V/m 10 V/m
Fast transients (burst) (5-50 ns, 5 kHz) on Supply terminals EN 61000-4-4 2 kV 2 kV
Surges (1.2/50 µs) on Supply terminals common mode EN 61000-4-5 2 kV 2 kV
differential mode EN 61000-4-5 1 kV —
Radio-frequency common mode (0.15 ÷ 80 MHz) EN 61000-4-6 10 V 10 V
on Supply terminals
Radiated and conducted emission EN 55022 class B class B
Other data 86.00 86.10, 86.20
Current absorption on signal control (B1) mA 1 —
Power lost to the environment without contact current W 0.1 (12 V) - 1 (230 V) 0.2
with rated current see 60 and 62 series relays
see 40, 44, 55, 60, 62 series relays
Technical data
Combinations
Supply voltage
024 = (12...24)V AC/DC (86.10/20 only)
240 = (12...240)V AC/DC (86.00 only)
Supply version
0 = AC (50/60 Hz)/DC
Series
Type
0 = Multi-function (AI, DI, SW, BE, CE, DE, EE, FE)
1 = Mono-function (AI)
2 = Mono-function (DI)
No. of poles
see 40, 44, 55, 60 and 62 series relays
Poles for chosesen relay/socket combination -
according to chart below
0 0 0 00 0 0
... .
24086
NOTE: time scales and functions must be set before energising the timer.
(1.5...15)s (6...60)s (0.8...8)min (6.4...64)min
(0.05...1)s (0.5...10)s (5...100)s (0.5...10)min (5...100)min (0.5...10)h (5...100)h
123 123 123 123 123 123 123
86
184
U = Supply
Voltage
S= Signal
switch
= Output
Contact
Without signal Start= Start via contact in supply line (A1).
With signal Start = Start via contact into control terminal (B1).
LED
Type 86.00
LED
Type 86.10/20 Supply
voltage
NO output
contact
OFF
ON
ON
ON
Open
Open
Open
(timing in progress)
Closed
A1A2 B1
U
L/+N/–
A1A2 B1
S
U
L/+N/–
(AI) ON delay.
Apply power to timer. Output contacts transfer after preset
time has elapsed. Reset occurs when power is removed.
T
U
t<T
456
(DI) ON pulse.
Apply power to timer. Output contacts transfer immediately.
After the preset time has elapsed, contacts reset.
T
U
t<T
456
(SW) Symmetrical recycling: ON start.
Apply power to timer. Output contacts transfer immediately
and cycle between ON and OFF for as long as power is
applied. The ratio is 1:1 (time on = time off).
TTTT
U
t<T
456
(BE) Signal OFF delay.
Power is permenently applied to the timer.
The output contacts transfer immediately on closure of the
Signal Switch (S). Opening the Signal Switch initiates the
preset delay, after which time the output contacts reset.
TT
TTt<T
U
S
456
(DE) Signal ON pulse.
Power is permenently applied to the timer.
On momentary or maintained closure of Signal Switch (S),
the output contacts transfer, and remain so for the duration
of the preset delay, after which they reset.
(EE) Signal OFF pulse.
Power is permenently applied to the timer.
On opening of the Signal Switch (S) the output contacts
transfer, and remain so for the duration of the preset delay,
after which they reset.
TT
U
S
Tt<T
456
(FE) Signal ON pulse + OFF pulse.
Power is permenently applied to the timer.
Both the opening and closing of the Signal Switch (S)
initiates the transfer of the output contacts. In both instances
the contacts reset after the delay period has elapsed.
TT
U
S
T
T
456
(CE) Signal ON and OFF delay.
Power is permenently applied to the timer.
Closing the Signal Switch (S) initiates the preset delay, after
which
time the output contacts transfer. Opening the Signal
switch initiates the same preset delay, after which time the
output contacts reset.
T
U
T TT
S
T T
456
(AI) ON delay.
Apply power to timer. Output contacts transfer after preset
time has elapsed. Reset occurs when power is removed.
T
U
t<T
T
U
t<T
(DI) ON pulse.
Apply power to timer. Output contacts transfer immediately.
After the preset time has elapsed, contacts reset.
T
U
t<T
L/+N/-
A1A2
U
Type
86.10
Type
86.20
86 Series - Timer modules
*
* With DC supply,
positive polarity has
to be conneted to B1
terminal (according
to EN 60204-1).
Functions
With signal START
Without signal START
Wiring diagram Type 86.00
86
185
86 Series - Sockets and accessories
86
95.05
Approvals
(according to type):
095.18
15 1515.815.815.815.815.8
73.3
110.5
10.3
5.1
095.01
060.72
Screw terminal (Box clamp) socket 95.03 95.03.0 95.05 95.05.0
panel or 35 mm rail (EN 50022) mount Blue Black Blue Black
For relay type 40.31 40.51/ 52/ 61
Accessories
Metal retaining clip
095.71
Plastic retaining and release clip 095.01 095.01.0 095.01 095.01.0
(supplied with socket - packaging code SPA)
8-way jumper link 095.18 095.18.0 095.18 095.18.0
Identification tag 095.00.4
Timer modules 86.10, 86.20
Sheet of marker tags for retaining and release clip 095.01 060.72
plastic, 72 tags, 6x12 mm
Technical data
Rated values
10 A - 250 V *
Insulation 6 kV (1.2/50 µs) between coil and contacts
Protection category IP 20
Ambient temperature °C –40…+70
Screw torque Nm 0.5
Wire strip length mm 8
Max. wire size for 95.03 and 95.05 sockets solid wire stranded wire
mm21x6 / 2x2.5 1x4 / 2x2.5
AWG 1x10 / 2x14 1x12 / 2x14
8-way jumper link for 95.03 and 95.05 sockets 095.18
Rated values 10 A - 250 V
A2 A1 COIL
11 COM
NO
NC
14
12
95.03
A2 A1 COIL
21 11 COM
NO
NC
24 14
22 12
95.05
15.8
78.6
28.3
Ø 3.2
* For currents >10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12).
32
32
=
76
15.8
60.9
78.6
28.3
Ø 3.2
35.4 =
186
86 Series - Sockets and accessories
94.04
Approvals
(according to type):
094.06
094.01
10.3
5.1
0.75 272726.25 27 26.25
135
3.3
7
Screw terminal (Box clamp) socket 94.02 94.02.0 94.03 94.03.0 94.04 94.04.0
panel or 35 mm rail (EN 50022) mount Blue Black Blue Black Blue Black
For relay type 55.32 55.33 55.32, 55.34
Accessories
Metal retaining clip 094.71
Plastic retaining and release clip 094.01
(supplied with socket - packaging code SPA)
6-way jumper link
094.06 094.06.0 094.06 094.06.0 094.06 094.06.0
Identification tag 094.00.4
Timer modules 86.10, 86.20
Sheet of marker tags for retaining and release clip 094.01 060.72
plastic, 72 tags, 6x12 mm
Technical data
Rated values 10 A - 250 V
Dielectric strength ≥2 kV AC
Protection category IP 20
Ambient temperature °C –40…+70
Screw torque Nm 0.5
Wire strip length mm 8
Max. wire size for 94.02/03/04 sockets solid wire
stranded wire
mm21x6 / 2x2.5 1x4 / 2x2.5
AWG 1x10 / 2x14 1x12 / 2x14
060.72
6-way jumper link for 94.02, 94.03 and 94.04 sockets 094.06
Rated values 10 A - 250 V
86
32
25.9
60.9
35.6
35.5
21.5
18.9
17.5 17.5
27
76
Ø 3.2
34.9
Ø 3
27
76
34.9
Ø 3
27
76
34.9
Ø 3
Ø 3.2
Ø 3.2
94.04 94.02 94.03
COIL
41
12
44
8
42
4
COM
NO
NC
11
9
14
5
12
1
A2
14
A1
13
31
9
21
8
11
7
34
6
24
5
14
4
32
3
22
2
12
1
A2
14
A1
13 COIL
COM
NO
NC
41
12 COM
NO
NC
31
11
21
10
11
9
44
8
34
7
24
6
14
5
42
4
32
3
22
2
12
1
COIL
A2
14
A1
13
187
86 Series - Sockets and accessories
86
77.5
3.2
38
35.5
21.6
420.4
33.5
26.9
81.1
30.5
34.8
90.03
Approvals
(according to type):
Screw terminal (Box clamp) socket 90.02 90.02.0 90.03 90.03.0
panel or 35 mm rail (EN 50022) mount Blue Black Blue Black
For relay type 60.12 60.13
Accessories
Metal retaining clip 090.33
6-way jumper link 090.06
Identification tag 090.00.2
Timer module 86.00, 86.10, 86.20
Technical data
Double terminal A1 (for easy start connection)
Rated values 10 A - 250 V
Dielectric strength ≥2 kV AC
Protection category IP 20
Ambient temperature °C –40...+70
Screw torque Nm 0.6
Wire strip length mm 10
Max. wire size for 90.02 and 90.03 sockets solid wire stranded wire
mm21x6 / 2x2.5 1x4 / 2x2.5
AWG 1x10 / 2x14 1x12 / 2x14
34
9
32
8
24
7
22
5
14
3
12
4
A2
10
31
11
21
6
A1
2
11
1
A1
2
90.03
START COILCOIL COMCOM COM
NO NC NO NC NO NC
77.5
3.2
38
30.5
34.8
90.02
COILCOIL COM COM
A2
7
21
8
11
1
A1
2
COIL
A1
2
NO
14
3
NO
24
6
NC
22
5
NC
12
4
090.06
6-way jumper link for 90.02 and 90.03 sockets 090.06
Rated values 10 A - 250 V
231549.5
38 38 38 38 38
49.515 1523 12.8
2.7
11
13.7
0.7
Approvals
(according to type):
86
86 Series - Sockets and accessories
188
92.03
Approvals
(according to type):
9
31
8
21
7
11
4
14
5
24
6
34
B
A2
A
A1
COM
NC
NO
1
12
2
22
3
32
COIL
Screw terminal (Box clamp) socket 92.03 (blue) 92.03.0 (black)
panel or 35 mm rail (EN 50022) mount
For relay type 62.32, 62.33
Accessories
Metal retaining clip (supplied with socket - packaging code SMA)
092.71
Identification tag 092.00.2
Timer modules 86.00, 86.10, 86.20
Technical data
Rated values 16 A - 250 V
Insulation ≥6 kV (1.2/50 µs) between coil and contacts
Protection category IP 20
Ambient temperature °C –40…+70
Screw torque Nm 0.8
Wire strip length mm 10
Max. wire size for 92.03 socket solid wire stranded wire
mm21x10 / 2x4 1x6 / 2x4
AWG 1x8 / 2x12 1x10 / 2x12
40
27
91.3
46.3
3.2
60.9
30.25
27
35.5
32
35.4 34.321.6
78.5