Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
High heat resistance, 125
AIchipTM-MVHSeries
Lower ESR, Higher ripple current
Endurance : 1,000 to 5,000 hours at 125
Suitable to fit for automotive equipment
Solvent resistant type except 63 to 450Vdc (see PRECAUTIONS AND GUIDELINES)
Vibration resistant structure
RoHS Compliant
AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information.
SPECIFICATIONS
Items Characteristics
Category
Temperature Range -40 to +125
Rated Voltage Range
10 to 450Vdc
Capacitance Tolerance
±20% (M) (at 20, 120Hz)
Leakage Current Rated voltage (Vdc) 10 to 100Vdc 160 to 450Vdc
F60 to JA0 I=0.01CV or 3μA, whichever is greater. I=0.04CV+100
KE0 to MN0 I=0.03CV or 4μA, whichever is greater.
Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20 after 2 minutes)
Dissipation Factor
(tanδ)
Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V 80V 100V 160 to 250V 400 & 450V
tanδ (Max.)
F60 to JA0 0.24 0.20 0.16 0.14 0.14 0.12 0.12 0.10
- -
KE0 to MN0 0.22 0.18 0.16 0.14 0.12 0.14
-
0.10 0.20 0.24
When nominal capacitance exceeds 1,000μF, add 0.02 to the value above for each 1,000μF increase. (at 20, 120Hz)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V 80V 100V 160 to 250V 400 & 450V
F60 to JA0
Z(-25)/Z(+20)
32222222
- -
Z(-40)/Z(+20)
64433333
- -
KE0 to MN0
Z(-25)/Z(+20)
432222
-
2 3 6
Z(-40)/Z(+20)
864333
-
3 6 10 (at 120Hz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for the specified
time at 125.
Time
F60 to H63 (10 to 100Vdc) : 1,000hours
HA0 to JA0 (10 to 100Vdc) : 2,000hours
KE0 to MN0 (10 to 100Vdc) : 5,000hours
KE0 to MN0 (160 to 450Vdc) : 2,000hours
Capacitance change ≦±30% of the initial value
D.F. (tanδ)300% of the initial specified value
Leakage current The initial specified value
Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours (500 hours
for 400 to 450Vdc) at 125 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage
according to Item 4.1 of JIS C 5101-4.
Rated voltage(Vdc) 10 to 50Vdc 63 to 450Vdc
Capacitance change ≦±30% of the initial value ≦±30% of the initial value
D.F. (tanδ)300% of the initial specified value 300% of the initial specified value
Leakage current The initial specified value 500% of the initial specified value
DIMENSIONS [mm]
φD±0.5
L±0.5 (Note)
0.3max.
A±0.2
W
C±0.2
B±0.2
P
Note : L
±
0.3 for F60 and F80
φD±0.5
B±0.2
L±0.5
0.3max.
A±0.2
W
C±0.2
P
: Dummy terminals
Size code : F60 to MN0
Terminal Code : G(Vibration resistant structure)
Size code : HA0 to MN0
Terminal Code : A
Vent
(Except F60 to HA0)
Vent
(Except HA0)
PART NUMBERING SYSTEM
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 4.7µF:4R7,10µ
F:100)
Taping·Tray code
Terminal code (A, G)
Voltage code (ex. 10V:100,50V:500, 100V: 101)
Series code
Category
E M V H A A A A A A A A A A A A NM
1 3 42 6 789 10 13125 18171611 1514
Please refer to "Product code guide (surface mount type)"
125
MVH
MVE P94
Size code
F60
F80
H63
HA0
JA0
KE0
KG5
LH0
LN0
MH0
MN0
D
6.3
6.3
8
8
10
12.5
12.5
16
16
18
18
L
5.7
7.7
6.3
10.0
10.0
13.5
16.0
16.5
21.5
16.5
21.5
A
6.6
6.6
8.3
8.3
10.3
13.0
13.0
17.0
17.0
19.0
19.0
B
6.6
6.6
8.3
8.3
10.3
13.0
13.0
17.0
17.0
19.0
19.0
C
7.2
7.2
9.0
9.0
11.0
13.7
13.7
18.0
18.0
20.0
20.0
W
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.7 to 1.1
0.7 to 1.1
1.0 to 1.3
1.0 to 1.3
1.0 to 1.3
1.0 to 1.3
1.0 to 1.3
1.0 to 1.3
P
1.9
1.9
2.3
3.1
4.5
4.2
4.2
6.5
6.5
6.5
6.5
MARKING
MVH
0V
1000
16V
EX) 16V1,000µF
KE0 to MN0
74H
47
35V
EX) 35V47µF
F60 to JA0
120 CAT. No. E1001Q
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
High heat resistance, 125
AIchipTM-MVHSeries
STANDARD RATINGS is not solvent resistant (63 to 450Vdc).
WV
(V
dc
)
Cap
(µF)
Size
code
ESR
(Ω max./
100kHz)
Rated ripple
current
(mArms/125)Part No. WV
(V
dc
)
Cap
(µF)
Size
code
ESR
(Ω max./
100kHz)
Rated ripple
current
(mArms/125)Part No.
20-40
100kHz
120Hz 20-40
100kHz
120Hz
10
100 F80 0.90 14.0 110
EMVH100ADA101MF80G
50
33 F80 2.0 30.0 83
EMVH500ADA330MF80G
100 H63 0.90 14.0 110
EMVH100ADA101MH63G
33 H63 1.6 30.0 83
EMVH500ADA330MH63G
220 F80 0.90 14.0 110
EMVH100ADA221MF80G
33 HA0 0.70 11.0 160
EMVH500DA330MHA0G
220 H63 0.90 14.0 110
EMVH100ADA221MH63G
47 HA0 0.70 11.0 160
EMVH500DA470MHA0G
220 HA0 0.40 6.0 220
EMVH100DA221MHA0G
47 JA0 0.50 7.5 247
EMVH500DA470MJA0G
330 HA0 0.40 6.0 220
EMVH100DA331MHA0G
100 JA0 0.50 7.5 247
EMVH500DA101MJA0G
330 JA0 0.30 4.5 296
EMVH100DA331MJA0G
100 KE0 0.23 3.5 550
EMVH500RA101MKE0S
470 JA0 0.30 4.5 296
EMVH100DA471MJA0G
220 KE0 0.23 3.5 550
EMVH500RA221MKE0S
1,000 KE0 0.14 2.1 750
EMVH100RA102MKE0S
220 LH0 0.15 2.3 850
EMVH500DA221MLH0S
2,200 LH0 0.10 1.5 1,000
EMVH100DA222MLH0S
330 KG5 0.18 2.7 700
EMVH500RA331MKG5S
2,200 MH0 0.10 1.5 1,200
EMVH100DA222MMH0S
330 LH0 0.15 2.3 850
EMVH500DA331MLH0S
3,300 MH0 0.10 1.5 1,200
EMVH100DA332MMH0S
470 MH0 0.15 2.3 920
EMVH500DA471MMH0S
4,700 MN0 0.058 0.87 1,550
EMVH100DA472MMN0S
63
10 F80 2.0 100 60
EMVH630ADA100MF80G
16
47 F60 1.6 24.0 69
EMVH160ADA470MF60G
10 H63 2.0 110 60
EMVH630ADA100MH63G
100 HA0 0.40 6.0 220
EMVH160DA101MHA0G
22 HA0 0.70 35.0 100
EMVH630DA220MHA0G
220 HA0 0.40 6.0 220
EMVH160DA221MHA0G
33 HA0 0.70 35.0 100
EMVH630DA330MHA0G
220 JA0 0.30 4.5 296
EMVH160DA221MJA0G
33 JA0 0.50 25.0 170
EMVH630DA330MJA0G
330 JA0 0.30 4.5 296
EMVH160DA331MJA0G
47 HA0 0.70 35.0 100
EMVH630DA470MHA0G
470 KE0 0.14 2.1 750
EMVH160RA471MKE0S
47 JA0 0.50 25.0 170
EMVH630DA470MJA0G
680 KE0 0.14 2.1 750
EMVH160RA681MKE0S
100 KE0 0.25 12.5 500
EMVH630RA101MKE0S
680 LH0 0.10 1.5 1,000
EMVH160DA681MLH0S
220 KG5 0.20 10.0 600
EMVH630RA221MKG5S
1,000 MH0 0.10 1.5 1,200
EMVH160DA102MMH0S
330 LH0 0.18 9.0 820
EMVH630DA331MLH0S
2,200 MH0 0.10 1.5 1,200
EMVH160DA222MMH0S
470 LN0 0.11 5.5 1,100
EMVH630DA471MLN0S
25
33 F60 1.6 24.0 69
EMVH250ADA330MF60G
80
10 HA0 0.75 50.0 70
EMVH800DA100MHA0G
47 F80 0.90 14.0 110
EMVH250ADA470MF80G
22 HA0 0.75 50.0 70
EMVH800DA220MHA0G
47 H63 0.90 14.0 110
EMVH250ADA470MH63G
22 JA0 0.55 35.0 115
EMVH800DA220MJA0G
100 F80 0.90 14.0 110
EMVH250ADA101MF80G
33 HA0 0.75 50.0 70
EMVH800DA330MHA0G
100 H63 0.90 14.0 110
EMVH250ADA101MH63G
33 JA0 0.55 35.0 115
EMVH800DA330MJA0G
100 HA0 0.40 6.0 220
EMVH250DA101MHA0G
47 JA0 0.55 35.0 115
EMVH800DA470MJA0G
220 HA0 0.40 6.0 220
EMVH250DA221MHA0G
100
10 HA0 0.75 50.0 70
EMVH101DA100MHA0G
220 JA0 0.30 4.5 296
EMVH250DA221MJA0G
22 HA0 0.75 50.0 70
EMVH101DA220MHA0G
330 JA0 0.30 4.5 296
EMVH250DA331MJA0G
22 JA0 0.55 35.0 115
EMVH101DA220MJA0G
330 KE0 0.14 2.1 750
EMVH250RA331MKE0S
33 JA0 0.55 35.0 115
EMVH101DA330MJA0G
470 KE0 0.14 2.1 750
EMVH250RA471MKE0S
47 KE0 0.33 16.5 450
EMVH101RA470MKE0S
470 LH0 0.10 1.5 1,000
EMVH250DA471MLH0S
68 KG5 0.26 13.0 550
EMVH101RA680MKG5S
680 LH0 0.10 1.5 1,000
EMVH250DA681MLH0S
100 LH0 0.24 12.0 650
EMVH101DA101MLH0S
680 MH0 0.10 1.5 1,200
EMVH250DA681MMH0S
220 MN0 0.16 8.0 950
EMVH101DA221MMN0S
1,000 MN0 0.058 0.87 1,550
EMVH250DA102MMN0S
160
10 KE0 100
EMVH161RA100MKE0S
35
10 F60 1.6 24.0 69
EMVH350ADA100MF60G
22 LH0 180
EMVH161DA220MLH0S
22 F60 1.6 24.0 69
EMVH350ADA220MF60G
33 MH0 245
EMVH161DA330MMH0S
33 F80 0.90 14.0 110
EMVH350ADA330MF80G
68 MN0 380
EMVH161DA680MMN0S
33 H63 0.90 14.0 110
EMVH350ADA330MH63G
200
10 KE0 100
EMVH201RA100MKE0S
47 F80 0.90 14.0 110
EMVH350ADA470MF80G
22 LH0 180
EMVH201DA220MLH0S
47 H63 0.90 14.0 110
EMVH350ADA470MH63G
33 LN0 250
EMVH201DA330MLN0S
47 HA0 0.40 6.0 220
EMVH350DA470MHA0G
33 MH0 245
EMVH201DA330MMH0S
100 HA0 0.40 6.0 220
EMVH350DA101MHA0G
47 MN0 315
EMVH201DA470MMN0S
100 JA0 0.30 4.5 296
EMVH350DA101MJA0G
250
10 KG5 110
EMVH251RA100MKG5S
220 JA0 0.30 4.5 296
EMVH350DA221MJA0G
22 LN0 200
EMVH251DA220MLN0S
330 KE0 0.14 2.1 750
EMVH350RA331MKE0S
22 MH0 205
EMVH251DA220MMH0S
330 LH0 0.10 1.5 1,000
EMVH350DA331MLH0S
33 MN0 260
EMVH251DA330MMN0S
470 KG5 0.11 1.5 900
EMVH350RA471MKG5S
400
4.7 KE0 70
EMVH401RA4R7MKE0S
470 LH0 0.10 1.5 1,000
EMVH350DA471MLH0S
6.8 LH0 100
EMVH401DA6R8MLH0S
680 MH0 0.10 1.5 1,200
EMVH350DA681MMH0S
10 LN0 140
EMVH401DA100MLN0S
50
10 F60 2.8 42.0 51
EMVH500ADA100MF60G
10 MH0 135
EMVH401DA100MMH0S
10 H63 1.6 30.0 83
EMVH500ADA100MH63G
450
3.3 KG5 65
EMVH451RA3R3MKG5S
22 F80 2.0 30.0 83
EMVH500ADA220MF80G
4.7 LH0 85
EMVH451DA4R7MLH0S
22 H63 1.6 30.0 83
EMVH500ADA220MH63G
10 MN0 145
EMVH451DA100MMN0S
: Enter the appropriate terminal code.
RATED RIPPLE CURRENT MULTIPLIERS
Frequency Multipliers
Rated voltage (Vdc) Size code
Frequency(Hz)
Capacitance(µF)
120 1k 10k 100k The endurance of capacitors is reduced with internal
heating produced by ripple current at the rate of halving
the lifetime with every 5 rise.
When long life performance is required in actual use, the
rms ripple current has to be reduced.
10 to 100
F60 to JA0 10 0.66 0.86 0.93 1.00
22 to 470 0.93 0.97 1.00 1.00
KE0 to MN0
47 to 100 0.40 0.75 0.90 1.00
220 to 470 0.50 0.85 0.94 1.00
680 to 1,000 0.60 0.87 0.95 1.00
2,200 to 3,300 0.75 0.90 0.95 1.00
4,700 0.85 0.95 0.98 1.00
160 to 450 KE0 to MN0 3.3 to 33 1.00 1.50 1.75 1.80
47 to 68 1.00 1.30 1.40 1.50
121 CAT. No. E1001Q
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS