MCT6, MCT61, MCT62 Dual Phototransistor Optocouplers Features Description Two isolated channels per package The MCT6X Optocouplers have two channels for density applications. For four channel applications, two-packages fit into a standard 16-pin DIP socket. Each channel is an NPN silicon planar phototransistor optically coupled to a gallium arsenide infrared emitting diode. Two packages fit into a 16 lead DIP socket Choice of three current transfer ratios Underwriters Laboratory (U.L.) recognized File E90700 VDE approved for IEC60747-5-2 Applications AC line/digital logic - isolate high voltage transients Digital logic/digital logic - eliminate spurious grounds Digital logic/AC triac control - isolate high voltage transients Twisted pair line receiver - eliminate ground loop feedthrough Telephone/telegraph line receiver - isolate high voltage transients High frequency power supply feedback control - maintain floating grounds and transients Relay contact monitor - isolate floating grounds and transients Power supply monitor - isolate transients Schematic Package Outlines ANODE 1 8 EMITTER 8 1 CATHODE 2 7 COLLECTOR CATHODE 3 6 COLLECTOR 8 8 1 ANODE 4 5 EMITTER 1 Equivalent Circuit (c)2006 Fairchild Semiconductor Corporation MCT6, MCT61, MCT62 Rev. 1.0.4 www.fairchildsemi.com MCT6, MCT61, MCT62 -- Dual Phototransistor Optocouplers January 2010 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Rating Value Unit -55 to +150 C TOTAL DEVICE TSTG Storage Temperature TOPR Operating Temperature TSOL Lead Solder Temperature (wave solder) PD -55 to +100 C 250 for 10 sec C 400 mW 5.33 mW/C Forward Current - Continuous 60 mA Forward Current - Peak (PW = 1s, 300pps) 3 A Reverse Voltage 3.0 V LED Power Dissipation @ TA = 25C 100 mW Derate above 25C (Total Input) 1.3 mW/C Collector Current - Continuous 30 mA Detector Power Dissipation @ TA = 25C 150 mW 2.0 mW/C Total Device Power Dissipation @ TA = 25C Derate above 25C EMITTER (Each channel) IF IF(pk) VR PD DETECTOR (Each channel) IC PD Derate above 25C (c)2006 Fairchild Semiconductor Corporation MCT6, MCT61, MCT62 Rev. 1.0.4 www.fairchildsemi.com 2 MCT6, MCT61, MCT62 -- Dual Phototransistor Optocouplers Absolute Maximum Ratings Individual Component Characteristics Symbol Parameter Test Conditions Min. Typ.* Max. Units 1.2 1.5 V 10 A EMITTER VF Input Forward Voltage IF = 20mA VR Reverse Voltage IR = 10A IR Reverse Current VR = 5V CJ Junction Capacitance VF = 0V, f = 1MHz 3.0 25 V 0.001 50 pF DETECTOR BVCEO Collector-Emitter Breakdown Voltage IC = 1.0mA, IF = 0 30 85 V BVECO Emitter-Collector Breakdown Voltage IE = 100A, IF = 0 6 13 V ICEO Collector-Emitter Dark Current VCE = 10V, IF = 0 5 CCE Capacitance VCE = 0V, f = 1MHz 8 100 nA pF Transfer Characteristics Symbol Characteristic Test Conditions Min. Typ.* Max. Units SWITCHING CHARACTERISTICS (AC) ton Non-Saturated Turn-on Time toff Non-Saturated Turn-off Time RL = 100, IC = 2mA, VCC = 10V 2.4 s 2.4 s CURRENT TRANSFER RATIO, COLLECTOR-EMITTER (DC) CTR MCT6 IF = 10mA, VCE = 10V 20 MCT61 IF = 5mA, VCE = 5V 50 MCT62 VCE(sat) Saturation Voltage % 100 IF = 16mA, IC = 2mA 0.15 0.40 V Isolation Characteristics Symbol VISO Characteristic Input-Output Isolation Voltage Test Conditions Min. Typ.* Max. Units II-O 10A, t = 1min. 5000 Vac(rms) 1011 RISO Isolation Resistance VI-O = 500VDC CISO Isolation Capacitance f = 1MHz 0.5 pF *All typicals at TA = 25C (c)2006 Fairchild Semiconductor Corporation MCT6, MCT61, MCT62 Rev. 1.0.4 www.fairchildsemi.com 3 MCT6, MCT61, MCT62 -- Dual Phototransistor Optocouplers Electrical Characteristics (TA = 25C unless otherwise specified) MCT6, MCT61, MCT62 -- Dual Phototransistor Optocouplers Typical Performance Curves Fig. 2 Normalized CTR vs. Ambient Temperature Fig. 1 Normalized CTR vs. Forward Current 1.6 1.4 VCE = 5.0V TA = 25C 1.4 1.0 NORMALIZED CTR NORMALIZED CTR 1.2 Normalized to IF = 10mA 0.8 0.6 0.4 IF = 5mA 1.2 1.0 IF = 10mA 0.8 0.6 0.2 0.0 0 5 10 15 IF - FORWARD CURRENT (mA) Normalized to IF = 10mA TA = 25C 0.4 -75 20 -50 -25 0 25 50 75 100 TA - AMBIENT TEMPERATURE (C) IF = 10mA VCC = 10V TA = 25C VCE = 10V SWITCHING SPEED (s) ICEO - COLLECTOR-EMITTER DARK CURRENT (A) 1000 1 10 0 10 -1 10 -2 10 -3 10 -4 10 125 Fig. 4 Switching Speed vs. Load Resistor Fig. 3 Dark Current vs. Ambient Temperature 10 IF = 20mA 100 Toff Tf 10 Ton 1 Tr -5 10 -6 0 25 50 75 100 0.1 125 0.1 1 10 R - LOAD RESISTOR (k) TA - AMBIENT TEMPERATURE (C) 100 Fig. 6 Collector-Emitter Saturation Voltage vs. Collector Current Fig. 5 LED Forward Voltage vs. Forward Current 1.8 100 TA = 25C VCE (SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V) VF - FORWARD VOLTATGE (V) 1.7 1.6 1.5 1.4 TA = 55C 1.3 TA = 25C 1.2 10 1 IF = 2.5mA 0.1 IF = 20mA 0.01 IF = 10mA 1.1 IF = 5mA TA = 100C 1.0 1 10 IF - LED FORWARD CURRENT (mA) (c)2006 Fairchild Semiconductor Corporation MCT6, MCT61, MCT62 Rev. 1.0.4 0.001 0.01 100 0.1 1 10 IC - COLLECTOR CURRENT (mA) www.fairchildsemi.com 4 Through Hole Surface Mount 9.18~10.18 (0.405) 9.18~10.18 (0.405) Pin 1 Pin 1 6.00~7.00 6.00~7.00 3.00~4.00 1.15~1.35 3.00~4.00 4.50 (Typ.) 1.15~1.35 0.35 Typ. 1.00 (Typ.) 2.30~3.30 3.85 Typ. 0.26 Typ. 2.29~2.79 0.40~0.60 7.62 (Typ.) 0.40~0.60 15 (Max.) 2.29~2.79 0.75~1.25 (Both sides 8.15 (Typ.) 9.86~10.46 0.26 (Typ.) 0.4" Lead Spacing Recommend Pad Layout for Surface Mount Leadform 9.18~10.18 (0.405) Pin 1 (1.50) (2.54) 6.00~7.00 (1.30) (10.50) (7.90) 3.00~4.00 1.15~1.35 4.60 (Typ.) (1.04) 15 (Max.) 1.10 (Typ.) 2.30~3.30 2.29~2.79 0.40~0.60 10.16 (Typ.) 0.26 (Typ.) Note: All dimensions are in millimeters. (c)2006 Fairchild Semiconductor Corporation MCT6, MCT61, MCT62 Rev. 1.0.4 www.fairchildsemi.com 5 MCT6, MCT61, MCT62 -- Dual Phototransistor Optocouplers Package Dimensions Option Example Part Number No Option MTC6 S MTC6S Description Standard Through Hole Surface Mount Lead Bend SD MTC6SD Surface Mount; Tape and Reel 300 MCT6300 VDE Approved 3S MCT63S Surface Mount Lead Bend; VDE Approved 3SD MCT63SD 300W MTC6300W Surface Mount; Tape and Reel; VDE Approved 0.4" Lead Spacing; VDE Approved Marking Information 1 V 3 MCT6 2 XX YY T1 6 4 5 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) 4 Two digit year code, e.g., `03' 5 Two digit work week ranging from `01' to `53' 6 Assembly package code (c)2006 Fairchild Semiconductor Corporation MCT6, MCT61, MCT62 Rev. 1.0.4 www.fairchildsemi.com 6 MCT6, MCT61, MCT62 -- Dual Phototransistor Optocouplers Ordering Information 12.0 0.1 4.90 0.20 4.0 0.1 O1.55 0.05 4.0 0.1 0.30 0.05 1.75 0.10 7.5 0.1 13.2 0.2 10.30 0.20 O1.6 0.1 10.30 0.20 0.1 MAX 16.0 0.3 User Direction of Feed Note: All dimensions are in inches (millimeters) Reflow Profile Temperature (C) 300 215 C, 10-30 s 250 225 C peak 200 150 Time above 183C, 60-150 sec 100 50 Ramp up = 3C/sec 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Time (Minute) * Peak reflow temperature: 225C (package surface temperature) * Time of temperature higher than 183C for 60-150 seconds * One time soldering reflow is recommended (c)2006 Fairchild Semiconductor Corporation MCT6, MCT61, MCT62 Rev. 1.0.4 www.fairchildsemi.com 7 MCT6, MCT61, MCT62 -- Dual Phototransistor Optocouplers Carrier Tape Specifications AccuPowerTM Auto-SPMTM Build it NowTM CorePLUSTM CorePOWERTM CROSSVOLTTM CTLTM Current Transfer LogicTM DEUXPEED(R) Dual CoolTM EcoSPARK(R) EfficientMaxTM EZSWITCHTM* TM* (R) (R) Fairchild Fairchild Semiconductor(R) FACT Quiet SeriesTM FACT(R) (R) FAST FastvCoreTM FETBenchTM FlashWriter(R)* FPSTM F-PFSTM (R) FRFET SM Global Power Resource Green FPSTM Green FPSTM e-SeriesTM GmaxTM GTOTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM MillerDriveTM MotionMaxTM Motion-SPMTM OPTOLOGIC(R) (R) OPTOPLANAR (R) PDP SPMTM Power-SPMTM PowerTrench(R) PowerXSTM Programmable Active DroopTM QFET(R) QSTM Quiet SeriesTM RapidConfigureTM TM Saving our world, 1mW/W/kW at a timeTM SignalWiseTM SmartMaxTM SMART STARTTM SPM(R) STEALTHTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SupreMOSTM SyncFETTM Sync-LockTM (R) * (R) The Power Franchise TinyBoostTM TinyBuckTM TinyCalcTM TinyLogic(R) TINYOPTOTM TinyPowerTM TinyPWMTM TinyWireTM TriFault DetectTM TRUECURRENTTM* SerDesTM (R) UHC Ultra FRFETTM UniFETTM VCXTM VisualMaxTM XSTM * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I45 (c)2006 Fairchild Semiconductor Corporation MCT6, MCT61, MCT62 Rev. 1.0.4 www.fairchildsemi.com 8 MCT6, MCT61, MCT62 -- Dual Phototransistor Optocouplers TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.