GBU6A THRU GBU6M
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 6.0 Amperes
FEATURES
MECHANICAL DATA
*Glass passivated chip junctions
*High case dielectric strength of 1500VRMS
*High surge overload rating
*Ideal for printed circuit boards
*Plastic package has underwriters laboratory flammability
classification 94V-0
*This series is UL listed under recognized
component index, file number E54214
*High temperature soldering quaranteed:260oC/10 seconds
0.375" (9.5mm) lead length, 5lbs. (2.3kg) tension
Case : Molded plastic body over passivated chip
Terminals : Plated Leads, solderable per
MIL-STD-750, Method 2026
Mounting Position : Any (NOTE 2)
Mounting torque : 5.0 in-lbs maximum
Weight : 0.15 ounce, 4.0 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature
unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum average forward rectified
output current at TC=100oC (NOTE 2,3)
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method) TJ=150oC
Maximum instantaneous forward voltage at 6.0 A
Maximum DC reverse current
at rated DC blocking voltage
@TC=25oC
@TC=125oC
Typical junction capacitance per element (NOTE 1)
Typical thermal resistance (NOTE 2,3)
Operating junction and storage temperature range
SYMBOLS
VRRM
I (AV)
IFSM
VF
IR
CJ
R JA
TJ,TSTG
200 400 600 800 1000
6.0
175
1.0
5.0
500
211 94
7.4
R JC 2.2
-55 to +150
UNITS
Volts
Maximum RMS voltage VRMS 140 280 420 560 700 Volts
Maximum DC blocking voltage VDC 200
100
70
100
GBU6D GBU6G GBU6J GBU6K GBU6MGBU6BGBU6A
50
35
50 400 600 800 1000 Volts
Volts
Amps
Amps
uA
pF
Rating for fusing ( t < 8.3ms ) I2t 127 A2s
oC / W
oC
NOTES :(1)Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC.
(2)Units case mounted on 2.6 x 1.4 x 0.06" thick (6.5 x 3.5 x 0.15 cm) Al. Plate heatsink
(3)Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screws
Zowie Technology Corporation
REV. : 0
GBU
*Dimensions in inches and (millimeters)
0.880(22.30)
0.310(7.90)
0.125(3.2)X45o
CHAMFER
0.290(7.40)
0.860(21.80)
0.022(0.56)
0.040(1.02)
0.030(0.76)
0.018(0.46)
0.085(2.16)
0.065(1.65)
0.100(2.54)
0.085(2.16)
0.080(2.03)
0.065(1.65)
0.160(4.10)
0.020 R(TYP.)
0.140(3.50)
0.075(1.9)R.
0.140(3.56)
0.130(3.30)
5o TYP.
9o TYP.
0.740(18.80)
0.720(18.30)
0.710(18.00)
0.690(17.50)
0.080(2.03)
0.060(1.52)
0.190(4.83)
0.210(5.33)
RATINGS AND CHARACTERISTIC CURVES GBU6A THRU GBU6M
Zowie Technology Corporation
REV. : 0
FIG.1 - FORWARD CURRENT DERATING CURVE
FIG.3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
AVERAGE FORWARD RECTIFIED
CURRENT, AMPERES
6.0
4.0
2.0
IINSTANTANEOUS FORWARD CURRENT,
AMPERES
0.10
1.00
10.00
0.010.4 0.6 0.8 1.0 1.2 1.4 1.6
020 40 60 80 100 120 140 160
Heat-Sink Mounting,
2.6 x 1.4 x 0.06" thk
(6.5 x 3.5" x .15cm)
AL. PLATE
PULSE WIDTH=300uS
1% DUTY CYCLE
AMBIENT TEMPERATURE, oC
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
60 Hz Resistive or inductive load 1.0 CYCLE
FIG.2 - MAXIMUM NON-REPETITIVE
PEAK FORWARD SURGE CURRENT
PEAK FORWARD SURGE CURRENT,
AMPERES
NUMBER OF CYCLES AT 60Hz
TJ=25oC
Single Sine-Wave
(JEDEC Method)
25
50
75
100
125
150
175
1 10 100
FIG.4 - TYPICAL REVERSE CHARACTERISTICS
PER BRIDGE ELEMENT
PERCENT OF RATED PEAK REVERSE VOLTAGE,%
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
0.1
.01 0 20
1.0
100
10
TJ=125oC
TJ=25oC
40 60 80 100 140120
FIG.5 - TYPICAL JUNCTION CAPACITANCE
TJ = 25oC
600V-1000V
50-400V
REVERSE VOLTAGE, VOLTS
.1
10
JUNCTION CAPACITANCE, pF
1000
.2 .4 1.0 2 4 10 20 40 100
100
TRANSIENT THERMAL IMPEDANCE(oC/W)
0.1
1
10
100 FIG.6 - TYPICAL TRANSIENT THERMAL IMPEDANCE
t , HEATING TIME, sec
100101.00.100.01
