EZ-LIGHT(R) Indicators--85 to 130 V ac Datasheet AC-operated, multi-color, general-purpose indicators * * * E* PI GT A I L * P UR CA L L F A C T O RY E QPMA A BL EU RO YL *C -S T * * * Rugged, cost-effective, and easy-to-install indicators available in K50 or K80 housing style Illumination provides easy-to-see operator guidance and equipment status indication Compact devices are completely self-contained - no controller needed 85 to 130 V ac operation Displays 3 colors Immune to ambient light, EMI, and RFI interference Contact Banner Engineering for more information. Models Model Construction K50LGRYA120Q 50 mm dome/ 30 mm mount polycarbonate K80LGRYA120Q 50 mm dome/Flat or DIN-mount polycarbonate Connection1 LED Function2 Inputs 5-pin Micro QD 3 Color: Green, Red, Yellow 85 to 130 V ac Specifications Supply Voltage and Current 85 to 130 V ac at 15 mA max. Connections 5-pin Micro-style integral QD (Q), 150 mm (6 in) pigtail QD (QP), or 2 m (6.5 ft) integral cable, depending on model K80L models: terminal-wired models available for use with bulk cable; compression fitting optional. Contact Banner Engineering for cable information. Supply Protection Circuitry Protected against transient voltages Indicators LEDs are independently selected: Green, Red, or Yellow. Operating Conditions -40 C to +50 C (-40 F to +122 F) 90% at +55 C maximum relative humidity (non-condensing) Input Response Time Indicator ON/OFF: 1 ms max. Environmental Rating Rated IEC IP67. K50L models fully encapsulated; K80L has encapsulated electronics only. K50L QD models meet IP69K, per DIN 40050-9; cabled models also meet IP69K if the cable and cable entrance are protected from high-pressure spray. Certifications 1 Integral QD models are listed. * For 150 mm PVC pigtail with QD, replace Q with QP in model number (example, K50LGRYA120QP). * For 2 m (6.5 ft) PVC cable, omit suffix Q from model number (example, K50LGRYA120). * A model with a QD requires a mating cable (see Cordsets on page 3) 2 Contact Banner Engineering for other colors and color combinations. Original Document 134548 rev. B 26 January 2015 134548 EZ-LIGHT(R) Indicators--85 to 130 V ac Dimensions K50L K80L 80.8 mm (3.18") 50.0 mm (1.97") 65.0 mm (2.56") 66.3 mm (2.61") 109.5 mm (4.31") 38 mm (1.50")* M30 x 1.5 (mounting nut included) Max. Torque 4.5 Nm (40 in-lbf) 65.0 mm (2.56") 20 mm (0.79") Internal Threads 1/2 - 14 NPSM Max. Torque 2.25 Nm (20 in-lbf) 11 mm (0.43") 4X O 5.5 mm (O 0.22") Max. Torque 1.12 Nm (10 in-lbf) with supplied screws 4X 8-32 UNC Max. Torque 1.12 Nm (10 in-lbf) Internal Threads 1/2 - 14 NPSM Max. Torque 2.25 Nm (20 in-lbf) 26.0 mm (1.02") M12 X 1 Wiring Cabled Models QD Models Key: 1 = Brown 2 = White 3 =Yellow 4 = Black 5 = Blue G = Green R = Red Y = Yellow X = V ac Neutral Z = Input 85 to 130V ac N.C. = Not Used 2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 134548 rev. B EZ-LIGHT(R) Indicators--85 to 130 V ac Accessories Cordsets 5-Pin Micro-Style Cordsets with Shield Model Length Style MQVR3S-506 1.83 m (6 ft) MQVR3S-515 4.57 m (15 ft) MQVR3S-530 9.14 m (30 ft) Dimensions Pinout (Female) 42 Typ. Straight 1/2-20 UNF-28 o 14.5 3 4 2 1 MQVR3S-506RA 1.83 m (6 ft) MQVR3S-515RA 4.57 m (15 ft) 1 = Brown 2 = White 3 = Yellow 4 = Black 5 = Blue 38 mm max. Right Angle MQVR3S-530RA 5 38 mm max. 9.14 m (30 ft) 1/2-20UNF-2B o 15 mm Brackets All measurements are listed in millimeters, unless noted otherwise. SMB30A * Right-angle bracket with curved slot for versatile orientation * Clearance for M6 (1/4 in) hardware * Mounting hole for 30 mm sensor * 12-ga. stainless steel 45 C 61 B A 69 83.2 36.3 67 B 58 29 A Hole center spacing: A=o 50.8 Hole size: A=o 7.0, B=o 30.0 Hole center spacing: A to B=40 Hole size: A=o 6.3, B= 27.1 x 6.3, C=o 30.5 SMB30FA * Swivel bracket with tilt and pan movement for precise adjustment * Mounting hole for 30 mm sensor * 12-ga. 304 stainless steel * Easy sensor mounting to extrude rail T-slot * Metric and inch size bolt available SMB30SC * Swivel bracket with 30 mm mounting hole for sensor * Black reinforced thermoplastic polyester * Stainless steel mounting and swivel locking hardware included 68.9 B A SMBAMS30P * Flat SMBAMS series bracket * 30 mm hole for mounting sensors * Articulation slots for 90+ rotation * 12-ga. 300 series stainless steel 45 C 93 A B Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 x 7.0, B=o 6.5, C=o 31.0 Bolt thread: SMB30FA, A= 3/8 - 16 x 2 in; SMB30FAM10, A= M10 1.5 x 50 Hole size: B= o 30.1 P/N 134548 rev. B www.bannerengineering.com - Tel: +1-763-544-3164 3 EZ-LIGHT(R) Indicators--85 to 130 V ac SMB30MM * 12-ga. stainless steel bracket with curved mounting slots for versatile orientation * Clearance for M6 (1/4 in) hardware * Mounting hole for 30 mm sensor 57 70 C 57 B A Hole center spacing: A = 51, A to B = 25.4 Hole size: A = 42.6 x 7, B = o 6.4, C = o 30.1 SMBAMS30RA * Right-angle SMBAMS series bracket * 30 mm hole for mounting sensors * Articulation slots for 90+ rotation * 12-ga. (2.6 mm) cold-rolled steel 45 C 53 A B 48 Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 x 7.0, B=o 6.5, C=o 31.0 For K80L SMBDX80DIN Black reinforced thermoplastic Bracket for mounting on a 35 mm DIN rail 89 89 Banner Engineering Corp Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. www.bannerengineering.com - Tel: +1-763-544-3164