SUPERIBBON Miniature Ribbon Commercial -~ All-Plastic ' Features Reliable solder or insulation displace- ment terminations * Designed for cable-to-cable, cable- to-panel, and cable-to-PC board applications e Available in plug style only Contact positions: 36 and 50 on IDC type; 50 only on solder type e Available with bail latching notches e Connector and hood sold as complete assembly * Mates with industry compatible connectors e IDC available for solid or stranded wire e UL Recognized-file E19071, E130965 @ CSA-LR31996-7 Performance Data Materials Insulation Material: IDC: UL 94V-0 rated glass-filled polyester, gray Solder: Glass filled thermoset, type MDG per MIL-M14, blue, UL 94V-0 Contact Material: Copper alloy Contact Plating: 16 pinch select gold over 50 pinch select nickel Option Plating: 30 inch select gold over 50 pinch select nickel Hood Material: UL 94V-0 rated polyester, gray Electrical Characteristics Withstanding Voltage: Per EIA Standard RS364, TP20 Current Rating: 5 Amps Contact Resistance: Per EIA Standard RS364, TP6 Low Level Contact Resistance: Per EIA Standard RS364, TP23 Insulation Resistance: Per EIA Standard RS364, TP21 Initial: 5000 Megohms minimum After Moisture: 1000 Megohms minimum Termination Resistance Change During Life Conditioning : IDC Resistance Change Wire Size (Milliohms) 26 AWG Solid 0.5 24 AWG Solid 0.5 26 AWG Stranded 2.0 085 (2.16mm) Density Solder and IDC 180/Bail Latching Mechanical Characteristics Mating/Unmating Force: Maximum Minimum Mating Force Unmating Force No. of WithLatches _ Without Latches Contacts Lbs Kg Lbs Kg 36 23 10 44 6 2.72 50 32 14.53 7 3.18 Wire Grip Strength: [DC Minimum Force Wire Size Lbs Kg 24 AWG Solid 7 3.18 26 AWG Solid 5 2.27 26 AWG Stranded 5 2.27 Environmental Characteristics Maximum Wire and Soft PVC Insulation Diameter: (IDC only) .048 (1.22mm) Shock: Per EIA Standard RS364, TP27, Condition A (50g peak) Vibration: Per EIA Standard RS364, TP28, Condition A Moisture Resistance: Per EIA Standard RS364, TP31, Test Condition B with following details and exceptions: a) Step 7bnot required; b) no drip loops in the wires Impact Test: Per EIA Standard RS364, TP42 Operating Temperature: 40C to +105C Thermal Shock: Per EIA Standard RS364, TP32, Condition B Accessories Accessories for all-plastic, solder or IDC miniature ribbon connectors are described on page 35. Termination Tools See pages 36 and 37 for IDC termination tools. f 4 - Lange Cable Opening G13 Small Cabie Opening 25015 25 36 Pin V96B 14354. 50 Pin 2040151 821 | 70011 a 1336 iui | Ordering Information-Solder Type No. of Contacts Part No. 50 57-30500-P Ordering Information-IDC No. of Large Cable Clamp Small Cable Clamp Contacts Part No. Part No. For 22, 24, And 26 AWG Solid Wire 36Piug = 77-32360LP 77-32360SP 50Plug -77-32500LP 72-32500SP For 24, 26 And 28 AWG Stranded 50Plug _77-32500LP-1 77-30500P 25