0.8mm pitch connector For cables IDC type male connector for cables HDRA-E68M( )1 IDC (0.8 mm) ANSI/SFF8441 Configuration of product Part No. HDRA- E 68 M ( ) 1 IDC method 1: One side IDC 35 21.2 Series name No. of contacts: 68 Type of contact M: IDC type, male Compatible cable Blank: AWG#30 (1/0.254), dia. 0.58 A : AWG#30 (7/0.1), dia. 0.58 C : AWG#34 (7/0.064), dia. 0.44 68 POS.#35 POS.#68 0.833=26.4 25 4.84 2.18 0.8 31.95 POS.#1 POS.#34 1 34 Components POS.#34 POS.#1 Contacts POS.#68 POS.#35 Insulator Shell Cable housing Mating connector: HDRA series right-angle through hole type or straddle SMT type female connector on the PCB For use with housings: HDRA series vertical housing, HDRA-E68LGKP ( ) Required tool: Termination tool: FHAT-0027 (Refer to page Tool-8) IDC tool: FLPT-0021A, Hand presser: RPS-K4 DIP SMT Press-in IDC Wire Soldering Crimping wrapping Others