04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
AXICOM
Signal Relays
IM Relay
n
Slim line 10x6mm, low profile 5.65mm and min. board-space 60mm2
n Switching current 2/5A, switching power 60W/62.5VA and
switching voltage 220VDC/250VAC
n Low coil power consumption,
140mW standard, 100mW for high sensitive version, 50mW for ultra
high sensitive version and 100mW for bistable version
n High dielectric and surge capability up to 2500Vrms between open
contacts and 3000Vrms between coil and contacts
n High mechanical shock resistance up to 300g functional
Typical applications
Telecommunication, access and transmission equipment, optical network
terminals, modems, office and business equipment, consumer electronics,
measurement and test equipment, industrial control, medical equipment,
automotive applications
Approvals
UL 508 File No. E 111441
Technical data of approved types on request
Contact Data standard, C D P
standard and high high contact
high dielectric current stability
version version version
Contact arrangement 2 form C, 2 CO
Max. switching voltage 220VDC, 220VDC, 220VDC,
250VAC 250VAC 250VAC
Rated current 2A 5A 2A
Limiting continuous current 2A 5A 2A
Switching power 60W, 62.5VA
Contact material PdRu AgNi PdRu
+Au +Au +Au
covered covered covered
Contact style twin contacts
Minimum switching voltage 100µV
Initial contact resistance <50mΩ at 10mA/20mV
Thermoelectric potential <10µV
Operate time typ. 1ms, max. 3ms
Release time
without diode in parallel typ. 1ms, max. 3ms
with diode in parallel typ. 3ms, max. 5ms
Bounce time max. typ. 1ms, max. 5ms
Contact Data (continued)
Electrical endurance
at contact application 0
(≤30mV/≤10mA) min. 2.5x106 operations
cable load open end min. 2.0x106 operations
resistive, 125VDC / 0.24A - 30W min. 5x105 operations
resistive, 220 VDC / 0.27A - 60W min. 1x105 operations
resistive, 250VAC / 0.25A - 62.5VA min. 1x105 operations
resistive, 30VDC / 1A - 30W min. 5x105 operations
resistive, 30VDC / 2A - 60W min. 1x105 operations
Contact ratings, UL 220VDC, 0.24A, 60W
125VDC, 0.24A, 30W
250VAC, 0.25A, 62.5VA
125VAC, 0.5A, 62.5VA
30VDC, 2A, 60W
Mechanical endurance 108 operations
Coil Data
Magnetic system monostable, bistable
Coil voltage range 1.5 to 24VDC
Coil versions, standard version, monostable, 1 coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
00 1.5 1.13 0.15 16 140
08 2.4 1.80 0.24 41 140
01 3 2.25 0.30 64 140
02 4.5 3.38 0.45 145 140
03 5 3.75 0.50 178 140
04 6 4.50 0.60 257 140
05 9 6.75 0.90 579 140
06 12 9.00 1.20 1029 140
07 24 18.00 2.40 2880 200
All figures are given for coil without pre-energization, at ambient temperature +23°C
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 21 of 28
AXICOMÊSignalÊRelays
IM Relay
Contact Data
IM-A IM-B IM-C IM-D IM-E
Number of contacts and type 1ÊPoleÊbreak 1ÊPoleÊmake 1ÊPoleÊÊ
changeover
2ÊPoleÊbreak 2ÊPoleÊmake
Contact assembly BifurcatedÊcontacts
Contact material Palladium-ruthenium,Êgold-covered
Limiting continuous current
at max. ambient temperature 2ÊA 2ÊA 4ÊA 2ÊA 2ÊA
Maximum switching current 2ÊA 2ÊA 3ÊA 2ÊA 2ÊA
Maximum swichting voltage 220ÊVdc
250ÊVac
Maximum switching capacity 60ÊW,Ê62.5ÊVA
Thermoelectric potential <Ê10ʵV
Minimum switching voltage 100ʵV
Initial contact resistance /
measuring condition: 10 mA / 20 mV < 100 mΩ < 100 mΩ NO < 100 mΩ < 50 mΩ < 50 mΩ
Electrical CC0 Contact category 0
endurance (≤ 30 mV / ≥ 10 mA)
cable load open end
Resistive load at 125 Vdc / 0.24 A - 30 W
at 220 Vdc / 0.27 A - 60 W
at 250 Vac / 0.25 A - 62.5
VA
at 30 Vdc / 1 A - 30 W
at 30 Vdc / 2 A - 60 W
min.Ê2.5ÊxÊ10
6Êoperations
min.Ê2.0ÊxÊ10
6Êoperations
min.Ê5ÊxÊ10
5Êoperations
min.Ê1ÊxÊ10
5Êoperations
min.Ê1ÊxÊ10
5Êoperations
min.Ê5ÊxÊ10
5Êoperations
min.Ê1ÊxÊ10
5Êoperations
Mechanical endurance typ.Ê108Êoperations
UL contact ratings 220 Vdc / 0.24 A - 60 W
125 Vdc / 0.24 A - 30 W
250 Vac / 0.25 A - 62.5 VA
125 Vac / 0.5 A - 62.5 VA
30 Vdc / 2 A - 60 W
Max. DC Load Breaking Capacity
DC Voltage [Vdc]
DC current [A]
resistive load
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 24 of 28
AXICOMÊSignalÊRelays
IM Relay
Coil Operating Range
Unom = Nominal coil voltage
Umax. = Upper limit of the operative range of
the coil voltage (limiting voltage) when
coils are continously energized
Uop. min. = Lower limit of the operative range of
the coil voltage (reliable operate voltage)
For latching relays Uset min. resp.
Ureset min.
Urel. min. = Lower limit of the operative range of
the coil voltage (reliable release voltage)
0
0. 2
0. 4
0. 6
0. 8
1
1. 2
1. 4
1. 6
1. 8
2
2. 2
2. 4
2. 6
2. 8
3
3. 2
3. 4
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 10 0 1 10 12 0
Coil Voltage [U/Unom]
Umax. at 0A
Umax. at 2x2A
Umax. at 2x1A
Unom. nominal coil voltage
Ambient Temperature [°C]
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Umax. at 0A
Umax. at 2x2A
Umax. at 2x1A
Unom. nominal coil voltage
Urel. min.
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Umax. - 5%coil
duty at
2x2A (100mW)
Umax.-5%coil
duty at 0A(100mW)
Umax.-5%coil
duty at 0A (200mW)
Umax. -5% coil
duty at 2x1A (100mW)
Unom. nominal coil voltage
Umax. at 0A
140mW coil
200mW coil
Urel. min.
50mW coil
100mW coil
Uop min.
Umax. at 0A
Umax. - 100% coil duty at
0A (100mW)
Umax. - 100% coil duty at
0A (200mW)
Uset min.
100 mW Latching
200 mW Latching
Coil operating range, standard version
Max. DC load breaking capacity
U
IM_
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
AXICOM
Signal Relays
IM Relay (Continued)
Insulation Data standard C D,P
standard, high high current,
sensitive, dielectric high contact
ultra high version stability
sensitive version
version
Initial dielectric strength
between open contacts 1000Vrms 1500Vrms 750Vrms
between contact and coil 1800Vrms 1800Vrms 1500Vrms
between adjacent contacts 1000Vrms 1800Vrms 750Vrms
Initial surge withstand voltage
between open contacts 1500V 2500V 1000V
between contact and coil 2500V 2500V 2000V
between adjacent contacts 1500V 2500V 1000V
Initial insulation resistance
between insulated elements >109Ω >109Ω >109Ω
Capacitance
between open contacts max. 1pF
between contact and coil max. 2pF
between adjacent contacts max. 2pF
RF Data
Isolation at 100MHz/900MHz -37.0dB/-18.8dB
Insertion loss at 100MHz/900MHz -0.03dB/-0.33dB
Voltage standing wave ratio (VSWR)
at 100MHz/900MHz 1.06/1.49
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -40°C to +85°C
Thermal resistance <150K/W
Category of environmental protection
IEC 61810 RT V - hermetically sealed
Degree of protection, IEC 60529 IP 67, immersion cleanable
Vibration resistance (functional) 20g, 10 to 500Hz
Shock resistance (functional), half sinus 11ms 50g
Shock resistance (destructive), half sinus 0.5ms 500g
Mounting position any
Weight max. 0.75g
Resistance to soldering heat THT
IEC 60068-2-20 265°C/10s
Resistance to soldering heat SMT
IEC 60068-2-58 265°C/10s
Moisture sensitive level, JEDEC J-Std-020D MSL3
Ultrasonic cleaning not recommended
Packaging/unit
THT version tube/50pcs., box/1000 pcs.
SMT version
reel/1000 pcs., box/1000 or 5000 pcs.
Coil Data (continued)
Coil versions, sensitive version, monostable, 1 coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
11 3 2.40 0.30 91 100
12 4.5 3.60 0.45 194 100
13 5 4.00 0.50 234 100
16 12 9.60 1.20 1315 110
17 24 19.20 2.40 4120 140
Coil versions, ultra high sensitive version, monostable, 1 coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
21 3 2.55 0.30 180 50
22 4.5 3.83 0.45 405 50
23 5 4.25 0.50 500 50
26 12 10.20 1.20 2880 50
All figures are given for coil without pre-energization, at ambient temperature +23°C
Coil versions, standard, bistable 1 coil
Coil Rated Set Reset Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
40 1.5 1.13 -1.13 23 100
48 2.4 1.80 -1.80 58 100
41 3 2.25 -2.25 90 100
42 4.5 3.38 -3.38 203 100
43 5 3.75 -3.75 250 100
44 6 4.50 -4.50 360 100
45 9 6.75 -6.75 810 100
46 12 9.00 -9.00 1440 100
47 24 18.00 -18.00 2880 200
All figures are given for coil without pre-energization, at ambient temperature +23°C
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 24 of 28
AXICOMÊSignalÊRelays
IM Relay
Coil Operating Range
Unom = Nominal coil voltage
Umax. = Upper limit of the operative range of
the coil voltage (limiting voltage) when
coils are continously energized
Uop. min. = Lower limit of the operative range of
the coil voltage (reliable operate voltage)
For latching relays Uset min. resp.
Ureset min.
Urel. min. = Lower limit of the operative range of
the coil voltage (reliable release voltage)
0
0. 2
0. 4
0. 6
0. 8
1
1. 2
1. 4
1. 6
1. 8
2
2. 2
2. 4
2. 6
2. 8
3
3. 2
3. 4
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 10 0 1 10 12 0
Coil Voltage [U/Unom]
Umax. at 0A
Umax. at 2x2A
Umax. at 2x1A
Unom. nominal coil voltage
Ambient Temperature [°C]
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Umax. at 0A
Umax. at 2x2A
Umax. at 2x1A
Unom. nominal coil voltage
Urel. min.
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Umax. - 5%coil
duty at
2x2A (100mW)
Umax.-5%coil
duty at 0A(100mW)
Umax.-5%coil
duty at 0A (200mW)
Umax. -5% coil
duty at 2x1A (100mW)
Unom. nominal coil voltage
Umax. at 0A
140mW coil
200mW coil
Urel. min.
50mW coil
100mW coil
Uop min.
Umax. at 0A
Umax. - 100% coil duty at
0A (100mW)
Umax. - 100% coil duty at
0A (200mW)
Uset min.
100 mW Latching
200 mW Latching
Coil operating range, sensitive and ultra high sensitive coil
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 24 of 28
AXICOMÊSignalÊRelays
IM Relay
Coil Operating Range
Unom = Nominal coil voltage
Umax. = Upper limit of the operative range of
the coil voltage (limiting voltage) when
coils are continously energized
Uop. min. = Lower limit of the operative range of
the coil voltage (reliable operate voltage)
For latching relays Uset min. resp.
Ureset min.
Urel. min. = Lower limit of the operative range of
the coil voltage (reliable release voltage)
0
0. 2
0. 4
0. 6
0. 8
1
1. 2
1. 4
1. 6
1. 8
2
2. 2
2. 4
2. 6
2. 8
3
3. 2
3. 4
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 10 0 1 10 12 0
Coil Voltage [U/Unom]
Umax. at 0A
Umax. at 2x2A
Umax. at 2x1A
Unom. nominal coil voltage
Ambient Temperature [°C]
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Umax. at 0A
Umax. at 2x2A
Umax. at 2x1A
Unom. nominal coil voltage
Urel. min.
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Umax. - 5%coil
duty at
2x2A (100mW)
Umax.-5%coil
duty at 0A(100mW)
Umax.-5%coil
duty at 0A (200mW)
Umax. -5% coil
duty at 2x1A (100mW)
Unom. nominal coil voltage
Umax. at 0A
140mW coil
200mW coil
Urel. min.
50mW coil
100mW coil
Uop min.
Umax. at 0A
Umax. - 100% coil duty at
0A (100mW)
Umax. - 100% coil duty at
0A (200mW)
Uset min.
100 mW Latching
200 mW Latching
Coil operating range, bistable 1 coil
Monostable version
rest condition
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHT
Standard
IMÊTHT
Narrow
IMÊSMT
GullÊWings
IMÊSMT
J-Legs
mm inch mm inch mm inch mm inch
L
W
H
10.00ʱÊ0.08
6.00ʱÊ0.08
5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
5.70ʱÊ0.30
5.80ʱÊ0.08
0.393ʱÊ0.003
0.224ʱÊ0.012
0.230ʱÊ0.003
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
SMT Version
Standard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75 ¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊ
positionÊ mightÊ changeÊ duringÊ trans-
portationÊ andÊ mustÊ beÊ resetÊ beforeÊ
use.
Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm
T
T1
T2
D1
D2
Tw
S
3.2
N/A
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.40
0.75
0.125
N/A
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.029
3.2
N/A
3.20ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
0.30ʱÊ0.05
0.125
N/A
0.126ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.011ʱÊ0.002
N/A
7.50ʱÊ0.30
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.295ʱÊ0.011
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
N/A
2.80ʱÊ0.20
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.110ʱÊ0.007
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.65-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.8±0.08
0.3±0.05
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
Terminal assignment
TOP view on relay
Bistable version, 1 coil
reset condition
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHT
Standard
IMÊTHT
Narrow
IMÊSMT
GullÊWings
IMÊSMT
J-Legs
mm inch mm inch mm inch mm inch
L
W
H
10.00ʱÊ0.08
6.00ʱÊ0.08
5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
5.70ʱÊ0.30
5.80ʱÊ0.08
0.393ʱÊ0.003
0.224ʱÊ0.012
0.230ʱÊ0.003
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
SMT Version
Standard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75 ¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊ
positionÊ mightÊ changeÊ duringÊ trans-
portationÊ andÊ mustÊ beÊ resetÊ beforeÊ
use.
Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm
T
T1
T2
D1
D2
Tw
S
3.2
N/A
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.40
0.75
0.125
N/A
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.029
3.2
N/A
3.20ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
0.30ʱÊ0.05
0.125
N/A
0.126ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.011ʱÊ0.002
N/A
7.50ʱÊ0.30
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.295ʱÊ0.011
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
N/A
2.80ʱÊ0.20
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.110ʱÊ0.007
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.65-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.8±0.08
0.3±0.05
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
Contacts are shown in reset condition.
Contact position might change during
transportation and must be reset before
use.
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
3
AXICOM
Signal Relays
IM Relay (Continued)
THT version
Dimensions
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHT
Standard
IMÊTHT
Narrow
IMÊSMT
GullÊWings
IMÊSMT
J-Legs
mm inch mm inch mm inch mm inch
L
W
H
10.00ʱÊ0.08
6.00ʱÊ0.08
5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
5.70ʱÊ0.30
5.80ʱÊ0.08
0.393ʱÊ0.003
0.224ʱÊ0.012
0.230ʱÊ0.003
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
SMT Version
Standard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75 ¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊ
positionÊ mightÊ changeÊ duringÊ trans-
portationÊ andÊ mustÊ beÊ resetÊ beforeÊ
use.
Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm
T
T1
T2
D1
D2
Tw
S
3.2
N/A
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.40
0.75
0.125
N/A
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.029
3.2
N/A
3.20ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
0.30ʱÊ0.05
0.125
N/A
0.126ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.011ʱÊ0.002
N/A
7.50ʱÊ0.30
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.295ʱÊ0.011
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
N/A
2.80ʱÊ0.20
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.110ʱÊ0.007
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.65-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.8±0.08
0.3±0.05
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
SMT version
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHT
Standard
IMÊTHT
Narrow
IMÊSMT
GullÊWings
IMÊSMT
J-Legs
mm inch mm inch mm inch mm inch
L
W
H
10.00ʱÊ0.08
6.00ʱÊ0.08
5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
5.70ʱÊ0.30
5.80ʱÊ0.08
0.393ʱÊ0.003
0.224ʱÊ0.012
0.230ʱÊ0.003
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
SMT Version
Standard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75 ¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊ
positionÊ mightÊ changeÊ duringÊ trans-
portationÊ andÊ mustÊ beÊ resetÊ beforeÊ
use.
Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm
T
T1
T2
D1
D2
Tw
S
3.2
N/A
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.40
0.75
0.125
N/A
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.029
3.2
N/A
3.20ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
0.30ʱÊ0.05
0.125
N/A
0.126ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.011ʱÊ0.002
N/A
7.50ʱÊ0.30
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.295ʱÊ0.011
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
N/A
2.80ʱÊ0.20
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.110ʱÊ0.007
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.65-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.8±0.08
0.3±0.05
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHT
Standard
IMÊTHT
Narrow
IMÊSMT
GullÊWings
IMÊSMT
J-Legs
mm inch mm inch mm inch mm inch
L
W
H
10.00ʱÊ0.08
6.00ʱÊ0.08
5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
5.70ʱÊ0.30
5.80ʱÊ0.08
0.393ʱÊ0.003
0.224ʱÊ0.012
0.230ʱÊ0.003
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
SMT Version
Standard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75 ¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊ
positionÊ mightÊ changeÊ duringÊ trans-
portationÊ andÊ mustÊ beÊ resetÊ beforeÊ
use.
Coplanarity ≤ 0.1mm
Coplanarity ≤ 0.1mm
T
T1
T2
D1
D2
Tw
S
3.2
N/A
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.40
0.75
0.125
N/A
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.029
3.2
N/A
3.20ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
0.30ʱÊ0.05
0.125
N/A
0.126ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.011ʱÊ0.002
N/A
7.50ʱÊ0.30
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.295ʱÊ0.011
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
N/A
2.80ʱÊ0.20
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.110ʱÊ0.007
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.65-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.8±0.08
0.3±0.05
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHT
Standard
IMÊTHT
Narrow
IMÊSMT
GullÊWings
IMÊSMT
J-Legs
mm inch mm inch mm inch mm inch
L
W
H
10.00ʱÊ0.08
6.00ʱÊ0.08
5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
5.70ʱÊ0.30
5.80ʱÊ0.08
0.393ʱÊ0.003
0.224ʱÊ0.012
0.230ʱÊ0.003
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
SMT Version
Standard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75 ¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊ
positionÊ mightÊ changeÊ duringÊ trans-
portationÊ andÊ mustÊ beÊ resetÊ beforeÊ
use.
Coplanarity ≤ 0.1mm
Coplanarity ≤ 0.1mm
T
T1
T2
D1
D2
Tw
S
3.2
N/A
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.40
0.75
0.125
N/A
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.029
3.2
N/A
3.20ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
0.30ʱÊ0.05
0.125
N/A
0.126ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.011ʱÊ0.002
N/A
7.50ʱÊ0.30
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.295ʱÊ0.011
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
N/A
2.80ʱÊ0.20
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.110ʱÊ0.007
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.65-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.8±0.08
0.3±0.05
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
Standard version Narrow version Gull wings J-legs
PCB layout
TOP view on component side of PCB
Standard version Narrow version Gull wings J-legs
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHT
Standard
IMÊTHT
Narrow
IMÊSMT
GullÊWings
IMÊSMT
J-Legs
mm inch mm inch mm inch mm inch
L
W
H
10.00ʱÊ0.08
6.00ʱÊ0.08
5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
5.70ʱÊ0.30
5.80ʱÊ0.08
0.393ʱÊ0.003
0.224ʱÊ0.012
0.230ʱÊ0.003
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
SMT Version
Standard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75
¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊ
positionÊ mightÊ changeÊ duringÊ trans-
portationÊ andÊ mustÊ beÊ resetÊ beforeÊ
use.
Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm
T
T1
T2
D1
D2
Tw
S
3.2
N/A
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.40
0.75
0.125
N/A
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.029
3.2
N/A
3.20ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
0.30ʱÊ0.05
0.125
N/A
0.126ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.011ʱÊ0.002
N/A
7.50ʱÊ0.30
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.295ʱÊ0.011
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
N/A
2.80ʱÊ0.20
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.110ʱÊ0.007
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.65-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.8±0.08
0.3±0.05
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHT
Standard
IMÊTHT
Narrow
IMÊSMT
GullÊWings
IMÊSMT
J-Legs
mm inch mm inch mm inch mm inch
L
W
H
10.00ʱÊ0.08
6.00ʱÊ0.08
5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
5.70ʱÊ0.30
5.80ʱÊ0.08
0.393ʱÊ0.003
0.224ʱÊ0.012
0.230ʱÊ0.003
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
SMT Version
Standard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75
¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊ
positionÊ mightÊ changeÊ duringÊ trans-
portationÊ andÊ mustÊ beÊ resetÊ beforeÊ
use.
Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm
T
T1
T2
D1
D2
Tw
S
3.2
N/A
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.40
0.75
0.125
N/A
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.029
3.2
N/A
3.20ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
0.30ʱÊ0.05
0.125
N/A
0.126ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.011ʱÊ0.002
N/A
7.50ʱÊ0.30
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.295ʱÊ0.011
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
N/A
2.80ʱÊ0.20
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.110ʱÊ0.007
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.65-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.8±0.08
0.3±0.05
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHT
Standard
IMÊTHT
Narrow
IMÊSMT
GullÊWings
IMÊSMT
J-Legs
mm inch mm inch mm inch mm inch
L
W
H
10.00ʱÊ0.08
6.00ʱÊ0.08
5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
5.70ʱÊ0.30
5.80ʱÊ0.08
0.393ʱÊ0.003
0.224ʱÊ0.012
0.230ʱÊ0.003
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
SMT Version
Standard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75 ¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊ
positionÊ mightÊ changeÊ duringÊ trans-
portationÊ andÊ mustÊ beÊ resetÊ beforeÊ
use.
Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm
T
T1
T2
D1
D2
Tw
S
3.2
N/A
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.40
0.75
0.125
N/A
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.029
3.2
N/A
3.20ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
0.30ʱÊ0.05
0.125
N/A
0.126ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.011ʱÊ0.002
N/A
7.50ʱÊ0.30
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.295ʱÊ0.011
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
N/A
2.80ʱÊ0.20
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.110ʱÊ0.007
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.65-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.8±0.08
0.3±0.05
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHT
Standard
IMÊTHT
Narrow
IMÊSMT
GullÊWings
IMÊSMT
J-Legs
mm inch mm inch mm inch mm inch
L
W
H
10.00ʱÊ0.08
6.00ʱÊ0.08
5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
5.70ʱÊ0.30
5.80ʱÊ0.08
0.393ʱÊ0.003
0.224ʱÊ0.012
0.230ʱÊ0.003
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
10.00ʱÊ0.08
ÊÊ6.00ʱÊ0.08
ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.003
0.236ʱÊ0.003
0.222ÊÐÊ0.008
SMT Version
Standard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75 ¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊ
positionÊ mightÊ changeÊ duringÊ trans-
portationÊ andÊ mustÊ beÊ resetÊ beforeÊ
use.
Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm
T
T1
T2
D1
D2
Tw
S
3.2
N/A
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.40
0.75
0.125
N/A
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.029
3.2
N/A
3.20ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
0.30ʱÊ0.05
0.125
N/A
0.126ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
0.011ʱÊ0.002
N/A
7.50ʱÊ0.30
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.295ʱÊ0.011
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
N/A
2.80ʱÊ0.20
5.08ʱÊ0.10
3.20ʱÊ0.15
2.20ʱÊ0.15
0.4
N/A
N/A
0.110ʱÊ0.007
0.200ʱÊ0.004
0.126ʱÊ0.006
0.087ʱÊ0.006
0.015
N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.65-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
3.2 5.8±0.08
0.3±0.05
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±0.15
2.2±0.15
2.2±0.15
5.65-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
Recommended soldering conditions
Processing
240°C
180°C
130°C
100°C
20-40sec Full line: typical
Dottedline: processlimits
forced
cooling
Time (s)
Temperature °C
Soldering conditions according IEC 60058-2-58 and
IPC/JEDEC J-STD-020B
Vapor Phase Soldering:
temperature/time profile (lead
and housing peak temperature)
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25 of 28
AXICOMÊSignalÊRelays
IM Relay
Soldering conditions according IEC 60058-2-58 and
IPC/JEDEC J-STD-020B
Infrared Soldering: Temperature/Time Profile
(Lead and Housing Peak Temperature)
240°C
180°C
130°C
100°C
20-40sec Full line: typical
Dottedline: processlimits
forced
cooling
Time (s)
Temperature °C
Time (s)
Infrared Soldering: Temperature/Time Profile
(Lead and Housing Peak Temperature)
Temperature °C
Time (s)
Recommended Soldering Conditions
Recommended Reflow Soldering Profile
Resistance to Soldering Heat - Reflow Profile
Temperature °C
Vapor Phase Soldering: Temperature/Time Profile
(Lead and Housing Peak Temperature)
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25 of 28
AXICOMÊSignalÊRelays
IM Relay
Soldering conditions according IEC 60058-2-58 and
IPC/JEDEC J-STD-020B
Infrared Soldering: Temperature/Time Profile
(Lead and Housing Peak Temperature)
240°C
180°C
130°C
100°C
20-40sec Full line: typical
Dottedline: processlimits
forced
cooling
Time (s)
Temperature °C
Time (s)
Infrared Soldering: Temperature/Time Profile
(Lead and Housing Peak Temperature)
Temperature °C
Time (s)
Recommended Soldering Conditions
Recommended Reflow Soldering Profile
Resistance to Soldering Heat - Reflow Profile
Temperature °C
Vapor Phase Soldering: Temperature/Time Profile
(Lead and Housing Peak Temperature)
Recommended reflow soldering profile
Resistance to soldering heat - Reflow profile
Infrared Soldering: temperature/
time profile (lead and housing
peak temperature)
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
4
AXICOM
Signal Relays
IM Relay (Continued)
Packing
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 26 of 28
AXICOMÊSignalÊRelays
IM Relay
Packing Dimensions in mm
Reel Dimension
Tube for THT version
50 relays per tube
1,000 relays per box
Tape and reel for SMT version
1,000 relays per reel
1,000 or 5,000 relays per box
Tube for THT version
50 relays per tube, 1000 relays per box
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 26 of 28
AXICOMÊSignalÊRelays
IM Relay
Packing Dimensions in mm
Reel Dimension
Tube for THT version
50 relays per tube
1,000 relays per box
Tape and reel for SMT version
1,000 relays per reel
1,000 or 5,000 relays per box
Tape and reel for SMT version
1000 relays per reel, 1000 or 5000 relays per box
Reel dimensions
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 26 of 28
AXICOMÊSignalÊRelays
IM Relay
Packing Dimensions in mm
Reel Dimension
Tube for THT version
50 relays per tube
1,000 relays per box
Tape and reel for SMT version
1,000 relays per reel
1,000 or 5,000 relays per box
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 26 of 28
AXICOMÊSignalÊRelays
IM Relay
Packing Dimensions in mm
Reel Dimension
Tube for THT version
50 relays per tube
1,000 relays per box
Tape and reel for SMT version
1,000 relays per reel
1,000 or 5,000 relays per box
Product code structure Typical product code IM 03 G R
Type
IM Signal Relays IM Series
Contact arrangement
Blank 2 form C, 2 CO
Coil
Coil code: please refer to coil versions table
Performance type
Blank Standard version C High dielectric version
D High current version
P High contact stability version
Terminals
T THT - standard J SMT - J-leg
N THT - narrow version G SMT - gull wing
Packing
S Tube R Reel
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
5
AXICOM
Signal Relays
IM Relay (Continued)
Product code Arrangement Perf. type Coil Coil type Coil Terminals Part number
IM00GR 2 form C, Standard 1.5VDC Monostable Standard SMT gull wing 3-1462037-7
IM00JR 2 CO SMT J-leg 3-1462037-9
IM00NS contacts THT narrow 1-1462038-0
IM01GR 3VDC SMT gull wing 1462037-1
IM01JR SMT J-leg 4-1462037-0
IM01NS THT narrow 1-1462038-1
IM01TS THT standard 1462037-4
IM02GR 4.5VDC SMT gull wing 1462037-9
IM02JR SMT J-leg 1-1462037-1
IM02NS THT narrow 1-1462038-2
IM03GR 5VDC SMT gull wing 1-1462037-4
IM03JR SMT J-leg 1-1462037-6
IM03NS THT narrow 1-1462038-3
IM03TS THT standard 1-1462037-8
IM04GR 6VDC SMT gull wing 4-1462037-2
IM04JR SMT J-leg 4-1462037-4
IM04NS THT narrow 1-1462038-4
IM05GR 9VDC SMT gull wing 3-1462037-4
IM05JR SMT J-leg 4-1462037-5
IM05NS THT narrow 1-1462038-5
IM05TS THT standard 2-1462037-2
IM06GR 12VDC SMT gull wing 2-1462037-3
IM06JR SMT J-leg 4-1462037-6
IM06NS THT narrow 1-1462038-6
IM07GR 24VDC SMT gull wing 4-1462037-7
IM07JR SMT J-leg 4-1462037-8
IM07NS THT narrow 1-1462038-7
IM08GR 2.4VDC SMT gull wing 6-1462039-3
IM11GR 3VDC High sens. 9-1462038-5
IM12GR 4.5VDC 1462039-3
IM13GR 5VDC 1462039-4
IM16GR 12VDC 1462039-5
IM17GR 24VDC 1462039-6
IM17TS THT standard 4-1462039-6
IM21GR 3VDC Ultra SMT gull wing 2-1462039-6
IM21TS high THT standard 1-1462039-5
IM22GR 4.5VDC sensitive SMT gull wing 2-1462039-7
IM22TS THT standard 2-1462039-8
IM23GR 5VDC SMT gull wing 2-1462039-9
IM23TS THT standard 3-1462039-0
IM25GR 9VDC SMT gull wing 3-1462039-5
IM25TS THT standard 3-1462039-6
IM26GR 12VDC SMT gull wing 3-1462039-1
IM26TS THT standard 3-1462039-2
IM40GR 1.5VDC Bistable Standard SMT gull wing 5-1462037-1
IM40JR SMT J-leg 5-1462037-2
IM40NS THT narrow 1-1462038-8
IM40TS THT standard 5-1462037-0
IM41GR 3VDC SMT gull wing 5-1462037-4
IM41JR SMT J-leg 5-1462037-5
IM41NS THT narrow 1-1462038-9
IM41TS THT standard 5-1462037-3
IM42GR 4.5VDC SMT gull wing 3-1462037-1
IM42JR SMT J-leg 5-1462037-7
IM42NS THT narrow 2-1462038-0
IM42TS THT standard 5-1462037-6
IM43GR 5VDC SMT gull wing 5-1462037-9
IM43JR SMT J-leg 6-1462037-0
IM43NS THT narrow 2-1462038-1
IM43TS THT standard 5-1462037-8
IM44GR 6VDC SMT gull wing 6-1462037-2
IM44JR SMT J-leg 6-1462037-3
IM44NS THT narrow 2-1462038-2
IM44TS THT standard 6-1462037-1
IM45GR 9VDC SMT gull wing 6-1462037-4
IM45JR SMT J-leg 6-1462037-5
IM45NS THT narrow 2-1462038-3
IM46GR 12VDC SMT gull wing 6-1462037-7
IM46JR SMT J-leg 6-1462037-8
IM46NS THT narrow 2-1462038-4
IM46TS THT standard 6-1462037-6
IM47GR 24VDC SMT gull wing 7-1462037-0
IM47JR SMT J-leg 7-1462037-1
IM47NS THT narrow 2-1462038-5
IM47TS THT standard 6-1462037-9
IM48GR 2.4VDC SMT gull wing 1462039-8
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
6
AXICOM
Signal Relays
IM Relay (Continued)
Product code Arrangement Perf. type Coil Coil type Coil Terminals Part number
IM01CGR 2 form C High 3VDC Monostable Standard SMT gull wing 1462038-4
IM01CTS 2 CO dielectric THT standard 9-1462038-6
IM02CGR contacts 4.5VDC SMT gull wing 1462038-1
IM03CGR 5VDC SMT gull wing 1462038-2
IM03CJR SMT J-leg 4-1462039-8
IM03CTS THT standard 4-1462039-7
IM05CGR 9VDC SMT gull wing 1462038-3
IM06CGR 12VDC SMT gull wing 9-1462037-9
IM06CJR SMT J-leg 3-1462039-4
IM06CTS THT standard 4-1462037-9
IM07CGR 24VDC SMT gull wing 1462039-2
IM07CTS THT standard 1462039-1
IM17CGR High sens. SMT gull wing 1462039-7
IM41CGR 3VDC Bistable Standard 4-1462039-2
IM42CGR 4.5VDC 4-1462039-1
IM43CGR 5VDC 9-1462038-7
IM02DGR High 4.5VDC Monostable Standard 9-1462038-8
IM03DGR current 5VDC 9-1462038-9
IM03DJR SMT J-leg 3-1462039-3
IM05DGR 9VDC SMT gull wing 1-1462039-7
IM06DGR 12VDC 1-1462039-8
IM06DJR SMT J-leg 7-1462039-0
IM06DTS THT standard 3-1462039-8
IM07DGR 24VDC SMT gull wing 3-1462039-7
IM07DJR SMT J-leg 7-1462039-4
IM07DTS THT standard 7-1462039-2
IM22DTS 4.5VDC U.h.sens. 7-1462039-6
IM41DGR 3VDC Bistable Standard SMT gull wing 6-1462039-8
IM42DGR 4.5VDC 1-1462039-9
IM42DNS THT narrow 1-1462039-6
IM46DNS 12VDC 1-1462039-2
IM47DJR 24VDC SMT J-leg 7-1462039-5
IM48DGR 2.4VDC SMT gull wing 1462039-9
IM49DGR 2VDC 2-1462039-2
IM02PGR High 4.5VDC Monostable Standard 5-1462039-4
IM02PNS contact THT narrow 5-1462039-8
IM03PGR stability 5VDC SMT gull wing 5-1462039-5
IM03PJR SMT J-leg 6-1462039-6
IM03PNS THT narrow 5-1462039-9
IM06PGR 12VDC SMT gull wing 5-1462039-6
IM06PNS THT narrow 6-1462039-0
IM42PGR 4.5VDC Bistable Standard SMT gull wing 5-1462039-7
IM42PNS THT narrow 7-1462039-8
IM43PGR SMT gull wing 7-1462039-3
IM46PNS 12VDC THT narrow 6-1462039-1