www.ti.com
FEATURES
SN74LVC07A . . . RGY PACKAGE
(TOP VIEW)
1 14
7 8
2
3
4
5
6
13
12
11
10
9
6A
6Y
5A
5Y
4A
1Y
2A
2Y
3A
3Y
1A
4Y V
GND
CC
1
2
3
4
5
6
7
14
13
12
11
10
9
8
1A
1Y
2A
2Y
3A
3Y
GND
VCC
6A
6Y
5A
5Y
4A
4Y
SN54LVC07A . . . J OR W PACKAGE
SN74LVC07A . . . D, DB, DGV, NS,
OR PW PACKAGE
(TOP VIEW)
3 2 1 20 19
9 10 11 12 13
4
5
6
7
8
18
17
16
15
14
6Y
NC
5A
NC
5Y
2A
NC
2Y
NC
3A
SN54LVC07A . . . FK PACKAGE
(TOP VIEW)
1Y
1A
NC
4Y
4A 6A
3Y
GND
NC VCC
NC - No internal connection
DESCRIPTION/ORDERING INFORMATION
SN54LVC07A, SN74LVC07AHEX BUFFERS/DRIVERS
WITH OPEN-DRAIN OUTPUTS
SCAS595O OCTOBER 1997 REVISED JULY 2005
Operate From 1.65 V to 5 V Max t
pd
of 2.6 ns at 5 VInputs and Open-Drain Outputs Accept Latch-Up Performance Exceeds 250 mA PerVoltages up to 5.5 V JESD 17
These hex buffers/drivers are designed for 1.65-V to 5.5-V V
CC
operation.
The outputs of the 'LVC07A devices are open drain and can be connected to other open-drain outputs toimplement active-low wired-OR or active-high wired-AND functions. The maximum sink current is 24 mA.
Inputs can be driven from 1.8-V, 2.5-V, 3.3-V (LVTTL), or 5-V (CMOS) devices. This feature allows the use ofthese devices as translators in a mixed-system environment.
ORDERING INFORMATION
T
A
PACKAGE
(1)
ORDERABLE PART NUMBER TOP-SIDE MARKING
QFN RGY Reel of 1000 SN74LVC07ARGYR LC07ATube of 50 SN74LVC07ADSOIC D Reel of 2500 SN74LVC07ADR LVC07AReel of 250 SN74LVC07ADTSOP NS Reel of 2000 SN74LVC07ANSR LVC07A–40 °C to 85 °C
SSOP DB Reel of 2000 SN74LVC07ADBR LC07ATube of 90 SN74LVC07APWTSSOP PW Reel of 2000 SN74LVC07APWR LC07AReel of 250 SN74LVC07APWTTVSOP DGV Reel of 2000 SN74LVC07ADGVR LC07ACDIP J Tube of 25 SNJ54LVC07AJ SNJ54LVC07AJ–55 °C to 125 °C CFP W Tube of 150 SNJ54LVC07AW SNJ54LVC07AWLCCC FK Tube of 55 SNJ54LVC07AFK SNJ54LVC07AFK
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available atwww.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
UNLESS OTHERWISE NOTED this document contains PRO-
Copyright © 1997–2005, Texas Instruments IncorporatedDUCTION DATA information current as of publication date. Prod-ucts conform to specifications per the terms of Texas Instrumentsstandard warranty. Production processing does not necessarilyinclude testing of all parameters.
www.ti.com
A Y
Absolute Maximum Ratings
(1)
SN54LVC07A, SN74LVC07AHEX BUFFERS/DRIVERS
WITH OPEN-DRAIN OUTPUTS
SCAS595O OCTOBER 1997 REVISED JULY 2005
FUNCTION TABLE(EACH BUFFER/DRIVER)
INPUT OUTPUTA Y
H HL L
LOGIC DIAGRAM, EACH BUFFER/DRIVER (POSITIVE LOGIC)
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
Supply voltage range –0.5 6.5 VV
I
Input voltage range
(2)
–0.5 6.5 VV
O
Output voltage range –0.5 6.5 VI
IK
Input clamp current V
I
< 0 –50 mAI
OK
Output clamp current V
O
< 0 –50 mAI
O
Continuous output current ±50 mAContinuous current through V
CC
or GND ±100 mAD package
(3)
86DB package
(3)
96DGV package
(3)
127θ
JA
Package thermal impedance °C/WNS package
(3)
76PW package
(3)
113RGY package
(4)
47T
stg
Storage temperature range –65 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratingsonly, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operatingconditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.(2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.(3) The package thermal impedance is calculated in accordance with JESD 51-7.(4) The package thermal impedance is calculated in accordance with JESD 51-5.
2
www.ti.com
Recommended Operating Conditions
(1)
Electrical Characteristics
SN54LVC07A, SN74LVC07AHEX BUFFERS/DRIVERS
WITH OPEN-DRAIN OUTPUTS
SCAS595O OCTOBER 1997 REVISED JULY 2005
SN54LVC07A
(2)
SN74LVC07A
UNITMIN MAX MIN MAX
V
CC
Supply voltage 1.65 5.5 1.65 5.5 VV
CC
= 1.65 V to 1.95 V 0.65 ×V
CC
0.65 ×V
CC
V
CC
= 2.3 V to 2.7 V 1.7 1.7V
IH
High-level input voltage VV
CC
= 2.7 V to 3.6 V 2 2V
CC
= 4.5 V to 5.5 V 0.7 ×V
CC
0.7 ×V
CC
V
CC
= 1.65 V to 1.95 V 0.35 ×V
CC
0.35 ×V
CC
V
CC
= 2.3 V to 2.7 V 0.7 0.7V
IL
Low-level input voltage VV
CC
= 2.7 V to 3.6 V 0.8 0.8V
CC
= 4.5 V to 5.5 V 0.3 ×V
CC
0.3 ×V
CC
V
I
Input voltage 0 5.5 0 5.5 VV
O
Output voltage 0 5.5 0 5.5 VV
CC
= 1.65 V 4 4V
CC
= 2.3 V 12 12I
OL
Low-level output current V
CC
= 2.7 V 12 12 mAV
CC
= 3 V 24 24V
CC
= 4.5 V 24 24T
A
Operating free-air temperature –55 125 –40 85 °C
(1) All unused inputs of the device must be held at V
CC
or GND to ensure proper device operation. Refer to the TI application report,Implications of Slow or Floating CMOS Inputs, literature number SCBA004.(2) Product preview
over recommended operating free-air temperature range (unless otherwise noted)
SN54LVC07A
(1)
SN74LVC07APARAMETER TEST CONDITIONS V
CC
UNITMIN TYP
(2)
MAX MIN TYP
(2)
MAX
I
OL
= 100 µA 1.65 V to 5.5 V 0.2 0.2I
OL
= 4 mA 1.65 V 0.45 0.452.3 V 0.7 0.7V
OL
I
OL
= 12 mA V2.7 V 0.4 0.43 V 0.55 0.55I
OL
= 24 mA
4.5 VI
I
V
I
= 5.5 V or GND 3.6 V ±5±5µAI
CC
V
I
= V
CC
or GND, I
O
= 0 3.6 V 10 10 µAOne input at V
CC
0.6 V,I
CC
2.7 V to 3.6 V 500 500 µAOther inputs at V
CC
or GNDC
i
V
I
= V
CC
or GND 3.3 V 5 5 pF
(1) Product preview(2) All typical values are at V
CC
= 3.3 V, T
A
= 25 °C.
3
www.ti.com
Switching Characteristics
Switching Characteristics
Operating Characteristics
SN54LVC07A, SN74LVC07AHEX BUFFERS/DRIVERS
WITH OPEN-DRAIN OUTPUTS
SCAS595O OCTOBER 1997 REVISED JULY 2005
over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1 through Figure 4 )
SN54LVC07A
(1)
FROM TO V
CC
= 1.8 V V
CC
= 2.5 V V
CC
= 3.3 V V
CC
= 5 VPARAMETER V
CC
= 2.7 V UNIT(INPUT) (OUTPUT) ±0.15 V ±0.2 V ±0.3 V ±0.5 V
MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX
t
pd
A Y 1 3.5 1 2.8 3 1 2.9 1 2.6 ns
(1) Product preview
over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1 through Figure 4 )
SN74LVC07A
FROM TO V
CC
= 1.8 V V
CC
= 2.5 V V
CC
= 3.3 V V
CC
= 5 VPARAMETER V
CC
= 2.7 V UNIT(INPUT) (OUTPUT) ±0.15 V ±0.2 V ±0.3 V ±0.5 V
MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX
t
pd
A Y 1 3.5 1 2.8 3 1 2.9 1 2.6 ns
T
A
= 25 °C
V
CC
= 1.8 V V
CC
= 2.5 V V
CC
= 3.3 V V
CC
= 5 VTESTPARAMETER UNITCONDITIONS
TYP TYP TYP TYP
Power dissipation capacitanceC
pd
f = 10 MHz 1.8 2 2.5 3.78 pFper buffer/driver
4
www.ti.com
PARAMETER MEASUREMENT INFORMATION
tPZL (see Note F)
tPLZ (see Note G)
tPHZ/tPZH
2 × VCC
2 × VCC
2 × VCC
TEST S1
VCC/2
VCC/2
VCC/2VCC/2
VCC/2VCC/2
VCC/2
VCC/2
VCC
VOL
th
tsu
From Output
Under Test
CL = 30 pF
(see Note A)
LOAD CIRCUIT
S1 Open
GND
1 k
1 k
Output
Control
(low-level
enabling)
Output
Waveform 1
S1 at 2 × VCC
(see Note B)
Output
Waveform 2
S1 at 2 × VCC
(see Note B)
tPZL
tPZH
tPLZ
tPHZ
0 V
VOL + 0.15 V
VCC − 0.15 V
0 V
VCC
0 V
0 V
tw
VCC VCC
VOLTAGE W AVEFORMS
SETUP AND HOLD TIMES
VOLTAGE W AVEFORMS
PULSE DURATION
VOLTAGE W AVEFORMS
ENABLE AND DISABLE TIMES
Timing
Input
Data
Input
Input
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr 2 ns, tf 2 ns.
D. The outputs are measured one at a time, with one transition per measurement.
E. Since this device has open-drain outputs, tPLZ and tPZL are the same as tpd.
F. tPZL is measured at VCC/2.
G. tPLZ is measured at VOL + 0.15 V.
H. All parameters and waveforms are not applicable to all devices.
0 V
VCC
VCC/2
tPHL
VCC/2 VCC/2 VCC
0 V
VCC
VOL
Input
Output
VOLTAGE W AVEFORMS
PROPAGATION DELAY TIMES
VCC/2 VCC/2
tPLH
2 × VCC
VCC
SN54LVC07A, SN74LVC07AHEX BUFFERS/DRIVERS
WITH OPEN-DRAIN OUTPUTS
SCAS595O OCTOBER 1997 REVISED JULY 2005
V
CC
= 1.8 V ±0.15 V
Figure 1. Load Circuit and Voltage Waveforms
5
www.ti.com
PARAMETER MEASUREMENT INFORMATION
tPZL (see Note F)
tPLZ (see Note G)
tPHZ/tPZH
2 × VCC
2 × VCC
2 × VCC
TEST S1
VCC/2
VCC/2
VCC/2VCC/2
VCC/2VCC/2
VCC/2
VCC/2
VCC
VOL
th
tsu
From Output
Under Test
CL = 30 pF
(see Note A)
LOAD CIRCUIT
S1 Open
GND
500
500
Output
Control
(low-level
enabling)
Output
Waveform 1
S1 at 2 × VCC
(see Note B)
Output
Waveform 2
S1 at 2 × VCC
(see Note B)
tPZL
tPZH
tPLZ
tPHZ
0 V
VOL + 0.15 V
VCC − 0.15 V
0 V
VCC
0 V
0 V
tw
VCC VCC
VOLTAGE W AVEFORMS
SETUP AND HOLD TIMES
VOLTAGE W AVEFORMS
PULSE DURATION
VOLTAGE W AVEFORMS
ENABLE AND DISABLE TIMES
Timing
Input
Data
Input
Input
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤10 MHz, ZO = 50 , tr ≤2 ns, tf ≤2 ns.
D. The outputs are measured one at a time, with one transition per measurement.
E. Since this device has open-drain outputs, tPLZ and tPZL are the same as tpd.
F. tPZL is measured at VCC/2.
G. tPLZ is measured at VOL + 0.15 V.
H. All parameters and waveforms are not applicable to all devices.
0 V
VCC
VCC/2
tPHL
VCC/2 VCC/2 VCC
0 V
VCC
VOL
Input
Output
VOLTAGE W AVEFORMS
PROPAGATION DELAY TIMES
VCC/2 VCC/2
tPLH
2 × VCC
VCC
SN54LVC07A, SN74LVC07AHEX BUFFERS/DRIVERS
WITH OPEN-DRAIN OUTPUTS
SCAS595O OCTOBER 1997 REVISED JULY 2005
V
CC
= 2.5 V ±0.2 V
Figure 2. Load Circuit and Voltage Waveforms
6
www.ti.com
PARAMETER MEASUREMENT INFORMATION
1.5 V
1.5 V
1.5 V1.5 V
1.5 V1.5 V
1.5 V
1.5 V
3 V
VOL
th
tsu
From Output
Under Test
CL = 50 pF
(see Note A)
LOAD CIRCUIT
S1 Open
GND
500
500
Output
Control
(low-level
enabling)
Output
Waveform 1
S1 at 6 V
(see Note B)
Output
Waveform 2
S1 at 6 V
(see Note B)
tPZL
tPZH
tPLZ
tPHZ
0 V
VOL + 0.3 V
2.7 V
0 V
2.7 V
0 V
0 V
tw
2.7 V 2.7 V
3 V
VOLTAGE W AVEFORMS
SETUP AND HOLD TIMES
VOLTAGE W AVEFORMS
PULSE DURATION
VOLTAGE W AVEFORMS
ENABLE AND DISABLE TIMES
Timing
Input
Data
Input
Input
tPZL (see Note F)
tPLZ (see Note G)
tPHZ/tPZH
6 V
6 V
6 V
TEST S1
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤10 MHz, ZO = 50 , tr ≤2.5 ns, tf ≤2.5 ns.
D. The outputs are measured one at a time, with one transition per measurement.
E. Since this device has open-drain outputs, tPLZ and tPZL are the same as tpd.
F. tPZL is measured at 1.5 V.
G. tPLZ is measured at VOL + 0.3 V.
H. All parameters and waveforms are not applicable to all devices.
6 V
0 V
2.7 V
1.5 V
tPHL
1.5 V 1.5 V 2.7 V
0 V
3 V
VOL
Input
Output
VOLTAGE W AVEFORMS
PROPAGATION DELAY TIMES
1.5 V 1.5 V
tPLH
SN54LVC07A, SN74LVC07AHEX BUFFERS/DRIVERS
WITH OPEN-DRAIN OUTPUTS
SCAS595O OCTOBER 1997 REVISED JULY 2005
V
CC
= 2.7 and 3.3 V ±0.3 V
Figure 3. Load Circuit and Voltage Waveforms
7
www.ti.com
PARAMETER MEASUREMENT INFORMATION
2 × VCC
1.5 V
VCC/2
VCC/2VCC/2
1.5 V1.5 V
1.5 V
1.5 V
3.5 V
VOL
th
tsu
From Output
Under Test
CL = 50 pF
(see Note A)
LOAD CIRCUIT
S1 Open
GND
500
500
Output
Control
(low-level
enabling)
Output
Waveform 1
S1 at 2 × VCC
(see Note B)
Output
Waveform 2
S1 at 7 V
(see Note B)
tPZL
tPZH
tPLZ
tPHZ
0 V
VOL + 0.3 V
3.2 V
0 V
3 V
0 V
0 V
tw
3 V VCC
VCC
VOLTAGE W AVEFORMS
SETUP AND HOLD TIMES
VOLTAGE W AVEFORMS
PULSE DURATION
VOLTAGE W AVEFORMS
ENABLE AND DISABLE TIMES
Timing
Input
Data
Input
Input
tPZL (see Note F)
tPLZ (see Note G)
tPHZ/tPZH
2 × VCC
2 × VCC
7 V
TEST S1
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤10 MHz, ZO = 50 , tr ≤2.5 ns, tf ≤2.5 ns.
D. The outputs are measured one at a time, with one transition per measurement.
E. Since this device has open-drain outputs, tPLZ and tPZL are the same as tpd.
F. tPZL is measured at VCC/2.
G. tPLZ is measured at VOL + 0.3 V.
H. All parameters and waveforms are not applicable to all devices.
0 V
3 V
1.5 V
tPHL
1.5 V 1.5 V 3 V
0 V
3.5 V
VOL
Input
Output
VOLTAGE W AVEFORMS
PROPAGATION DELAY TIMES
1.5 V 1.5 V
tPLH
SN54LVC07A, SN74LVC07AHEX BUFFERS/DRIVERS
WITH OPEN-DRAIN OUTPUTS
SCAS595O OCTOBER 1997 REVISED JULY 2005
V
CC
= 5 V ±0.5 V
Figure 4. Load Circuit and Voltage Waveforms
8
PACKAGING INFORMATION
Orderable Device Status (1) Package
Type Package
Drawing Pins Package
Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
SN74LVC07AD ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07ADBR ACTIVE SSOP DB 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07ADBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07ADE4 ACTIVE SOIC D 14 50 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07ADGVR ACTIVE TVSOP DGV 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07ADGVRE4 ACTIVE TVSOP DGV 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07ADGVRG4 ACTIVE TVSOP DGV 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07ADR ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07ADT ACTIVE SOIC D 14 250 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07ADTE4 ACTIVE SOIC D 14 250 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07ANSR ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07ANSRE4 ACTIVE SO NS 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07APW ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07APWE4 ACTIVE TSSOP PW 14 90 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07APWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI
SN74LVC07APWR ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07APWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07APWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07APWT ACTIVE TSSOP PW 14 250 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07APWTE4 ACTIVE TSSOP PW 14 250 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07APWTG4 ACTIVE TSSOP PW 14 250 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74LVC07ARGYR ACTIVE QFN RGY 14 1000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-2-260C-1YEAR
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
PACKAGE OPTION ADDENDUM
www.ti.com 9-Aug-2005
Addendum-Page 1
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
PACKAGE OPTION ADDENDUM
www.ti.com 9-Aug-2005
Addendum-Page 2
MECHANICAL DATA
MPDS006C – FEBRUAR Y 1996 – REVISED AUGUST 2000
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE
24 PINS SHOWN
14
3,70
3,50 4,90
5,10
20
DIM
PINS **
4073251/E 08/00
1,20 MAX
Seating Plane
0,05
0,15
0,25
0,50
0,75
0,23
0,13
112
24 13
4,30
4,50
0,16 NOM
Gage Plane
A
7,90
7,70
382416
4,90
5,103,70
3,50
A MAX
A MIN
6,60
6,20
11,20
11,40
56
9,60
9,80
48
0,08
M
0,07
0,40
0°8°
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side.
D. Falls within JEDEC: 24/48 Pins – MO-153
14/16/20/56 Pins – MO-194
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE
4040065 /E 12/01
28 PINS SHOWN
Gage Plane
8,20
7,40
0,55
0,95
0,25
38
12,90
12,30
28
10,50
24
8,50
Seating Plane
9,907,90
30
10,50
9,90
0,38
5,60
5,00
15
0,22
14
A
28
1
2016
6,50
6,50
14
0,05 MIN
5,905,90
DIM
A MAX
A MIN
PINS **
2,00 MAX
6,90
7,50
0,65 M
0,15
0°ā8°
0,10
0,09
0,25
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,65 M
0,10
0,10
0,25
0,50
0,75
0,15 NOM
Gage Plane
28
9,80
9,60
24
7,90
7,70
2016
6,60
6,40
4040064/F 01/97
0,30
6,60
6,20
80,19
4,30
4,50
7
0,15
14
A
1
1,20 MAX
14
5,10
4,90
8
3,10
2,90
A MAX
A MIN
DIM PINS **
0,05
4,90
5,10
Seating Plane
0°–8°
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’ s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of T I products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products Applications
Amplifiers amplifier.ti.com Audio www.ti.com/audio
Data Converters dataconverter.ti.com Automotive www.ti.com/automotive
DSP dsp.ti.com Broadband www.ti.com/broadband
Interface interface.ti.com Digital Control www.ti.com/digitalcontrol
Logic logic.ti.com Military www.ti.com/military
Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork
Microcontrollers microcontroller.ti.com Security www.ti.com/security
Telephony www.ti.com/telephony
Video & Imaging www.ti.com/video
Wireless www.ti.com/wireless
Mailing Address: Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2005, Texas Instruments Incorporated