The products listed in this catalog are only a few of the thou-
sands of variations that TUSONIX produces. For custom
component design, please contact the factory direct.
#4-40 UNC-2A Pi & C Filters
TUSONIX
Part
Number
Style
Circuit
Working
Voltage
(dc)
85°C 125°C
4261-001
4200-012
4403-035
4400-005
4400-035
4403-005
4400-006
4400-036
4403-006
4403-036
4400-010
4400-040
4403-010
4403-040
4400-016
4400-041
4400-003
4400-033
4403-003
4403-033
4400-004
4400-034
4403-004
4403-034
4400-680
4403-680
4400-008
4400-038
4403-008
4403-038
1
1
2
1
1
2
1
1
2
2
1
1
2
2
1
1
1
1
2
2
1
1
2
2
1
2
1
1
2
2
Capacitance
(pF)
Capacitance
Tolerance
Current
(A)
Minimum No-Load Insertion Loss
(dB) at 25°C per MIL-Std-220
Pi
Pi
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
--
--
70
70
70
70
70
70
70
70
70
70
70
70
50
50
150
150
150
150
150
150
150
150
300
300
300
300
300
300
50
200
50
50
50
50
50
50
50
50
50
50
50
50
50
50
100
100
100
100
100
100
100
100
200
200
200
200
200
200
5500
1500
10,000
10,000
10,000
10,000
15,000
15,000
15,000
15,000
27,000
27,000
27,000
27,000
50,000
50,000
2700
2700
2700
2700
5000
5000
5000
5000
5
5
10
10
10
10
GMV
-0,+100%
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
MAX
MAX
GMV
GMV
GMV
GMV
3
3
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
100MHz10MHz 1GHz 10GHz
--
--
4
4
4
4
7
7
7
7
10
10
10
10
15
15
--
--
--
--
--
--
--
--
--
--
--
--
--
--
14
5
21
21
21
21
20
20
20
20
28
28
28
28
35
35
10
10
10
10
15
15
15
15
--
--
--
--
--
--
55
42
35
35
35
35
35
35
35
35
42
42
42
42
45
45
25
25
25
25
30
30
30
30
--
--
--
--
--
--
70
70
50
50
50
50
55
55
55
55
65
65
65
65
70
70
40
40
40
40
45
45
45
45
--
--
5
5
5
5
.018 [.46]
.018 [.46]
.030 [.76]
.020 [.51]
.030 [.76]
.020 [.51]
.020 [.51]
.030 [.76]
.020 [.51]
.030 [.76]
.020 [.51]
.030 [.76]
.020 [.51]
.030 [.76]
.020 [.51]
.030 [.76]
.020 [.51]
.030 [.76]
.020 [.51]
.030 [.76]
.020 [.51]
.030 [.76]
.020 [.51]
.030 [.76]
.030 [.76]
.030 [.76]
.020 [51]
.030 [.76]
.020 [.51]
.030 [.76]
1MHz
--
--
60
60
60
60
60
60
60
60
65
65
65
65
--
--
50
50
50
50
55
55
55
55
--
--
20
20
20
20
Lead
Dia.
inches
[mm]
Drawings not to scale. All bushing style filters include hex nut and lock washer unless otherwise noted.
13
C Configuration
Pi Configuration
STYLE 1
.030 MAX.
[0.76 MAX.]
# 4- 40 UNC - 2A
.120 ±.005
[3.05 ±0.13]
.220 ±.010
[5.59 ±0.25]
.156 ±.010
[3.96 ±0.25]
.360 ±.020
[9.14 ±0.51]
.240 ±.020
[6.10 ±0.51]
.038 MAX.
[0.96 MAX.]
STYLE 2
.060 MAX.
[1.52 MAX.]
# 4- 40 UNC - 2A
.075 ±.005
[1.91 ±0.13]
.140 ±.010
[3.56 ±0.25]
.125 ±.010
[3.18 ±0.25]
.410 ±.020
[10.41 ±0.51]
.190 ±.020
[4.83 ±0.51]
.060 MAX.
[1.52 MAX.]
Large
Hex
Small
Hex
.030 MAX.
[0.76 MAX.]
Catalog 4000R7
Part 2
Revised 4/10/07
7741 North Business Park Drive
Tucson, Arizona 85743
Ph: 520-744-0400 Fax: 520-744-6155
Web site: www.tusonix.com E-mail: sales@tusonix.com
#4-40 UNC-2A C & L Filters
TUSONIX 4400 Series Miniature EMI Filters
These filters are ideal for applications where small size
and high performance are critical and a threaded mount-
ing technique is desired.
These C and L configured filters are available in two physi-
cal configurations and can be supplied with either unified
or metric thread (see page 18 for metric). The small pack-
age and large range of electrical characteristics of the 4400
Series make it an effective solution for a variety of micro-
wave applications.
TUSONIX
Part
Number
Style
Circuit
Working
Voltage
(dc)
85°C 125°C
4400-009
4400-039
4403-009
4403-039
4400-000
4400-030
4403-000
4403-030
4400-001
4400-031
4403-001
4403-031
4400-007
4400-037
4403-007
4403-037
4400-002
4400-032
4403-002
4403-032
4400-055
4400-056
4400-060
4400-057
4400-053
4400-054
4400-050
4400-051
4400-052
1
1
2
2
1
1
2
2
1
1
2
2
1
1
2
2
1
1
2
2
1
1
1
1
1
1
1
1
1
Capacitance
(pF)
Capacitance
Tolerance
Current
(A)
Minimum No-Load Insertion Loss
(dB) at 25°C per MIL-Std-220
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
L
L
L
L
L
L
L
L
L
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
70
70
70
50
150
150
300
300
300
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
50
50
50
50
100
100
200
200
200
25
25
25
25
100
100
100
100
500
500
500
500
1000
1000
1000
1000
1200
1200
1200
1200
10,000
15,000
27,000
50,000
2700
5000
100
500
1200
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
100MHz10MHz 1GHz 10GHz
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
4
7
10
15
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
5
5
5
5
5
5
5
5
21
25
28
35
10
15
--
--
5
--
--
--
--
3
3
3
3
15
15
15
15
20
20
20
20
20
20
20
20
35
40
45
52
25
30
3
15
20
10
10
10
10
20
20
20
20
35
35
35
35
35
35
35
35
35
35
35
35
55
60
65
70
40
45
20
35
35
.020 [.51]
.030 [.76]
.020 [.51]
.030 [.76]
.020 [.51]
.030 [.76]
.020 [.51]
.030 [.76]
.020 [.51]
.030 [.76]
.020 [.51]
.030 [.76]
.020 [.51]
.030 [.76]
.020 [.51]
.030 [.76]
.020 [.51]
.030 [.76]
.020 [.51]
.030 [.76]
.020 [.51]
.020 [.51]
.020 [.51]
.020 [.51]
.020 [.51]
.020 [.51]
.020 [.51]
.020 [.51]
.020 [.51]
1MHz
25
25
25
25
28
28
28
28
40
40
40
40
45
45
45
45
45
45
45
45
70
60
70
--
55
60
33
45
50
Lead
Dia.
Drawings not to scale. Please Note: All bushing style filters include hex nut and lock washer unless otherwise noted.
14
L Configuration
C Configuration (Continued from page 13)
The products listed in this catalog are only a few of the thou-
sands of variations that TUSONIX produces. For custom
component design, please contact the factory direct.
#6-40 UNF-2A EMI Pi Filters
TUSONIX
Part
Number
Style
Circuit
Working
Voltage
(dc)
85°C 125°C
4200-000
4200-002
4200-005
1
2
1
Capacitance
(pF)
Capacitance
Tolerance
Current
(A)
Minimum No-Load Insertion Loss
(dB) at 25°C per MIL-Std-220
Pi
Pi
Pi
300
300
300
200
200
200
1500
1500
3000
GMV
GMV
GMV
10
10
10
100MHz10MHz 1GHz 10GHz
5
5
8
40
40
50
60
60
70
60
60
70
inches
[mm]
Drawings not to scale. Please Note: All bushing style filters include hex nut and lock washer unless otherwise noted.
15
Pi Configuration
MIL-PRF-15733 TUSONIX No. Page No. ❖
/28-0001 4201-501 18
/28-0002 4201-503 18
/28-0003 4251-503 NS
/33-0001 4101-502 12
/33-0002 4101-503 12
/38-0004 4601-503 NS
/38-0005 4601-504 NS
/43-0001 4204-501 19
/43-0002 4201-506 NS
/44-0001 4251-500 NS
/44-0002 4205-500 NS
/44-0003 4205-501 NS
/46-0001 4207-500 NS
/49-0001 4601-502 NS
/49-0006 4601-501 NS
/49-0007 4601-500 NS
/51-0001 4101-504 12
/51-0002 4151-501 12
❖ NS indicates a part that is not shown in this catalog.
MIL-PRF-15733 TUSONIX No. Page No. ❖
/61-0001 4204-500 19
/61-0002 4202-501 20
/61-0003 4206-502 21
/61-0004 4206-501 21
/61-0005 4203-502 NS
/61-0006 4203-501 20
/61-0007 4203-552 20
/61-0008 4201-502 18
/61-0009 4253-500 NS
/61-0010 4203-553 20
/61-0011 4203-551 20
/61-0012 4253-501 NS
/61-0013 4251-502 NS
/61-0014 4251-501 NS
/62-0001 4101-501 12
/62-0002 4100-500 12
/62-0003 4101-505 12
/62-0004 4151-500 12
/66-0001 4101-500 12
MIL PARTS CROSS REFERENCE
STYLE 1
# 20 AWG.
(.032) [0.81]
# 6- 40 UNF - 2A
.130 ±.015
[3.30 ±0.38]
.220 ±.015
[5.59 ±0.38]
.156 ±.015
[3.96 ±0.38]
.950 ±.031
[24.13 ±0.79]
.290 ±.031
[7.37 ±0.79]
STYLE 2
.125 ±.015
[3.17 ±0.38]
# 6- 40 UNF - 2A
.130 ±.015
[3.30 ±0.38]
.220 ±.015
[5.59 ±0.38]
.156 ±.015
[3.96 ±0.38]
.950 ±.031
[24.13 ±0.79]
.290 ±.031
[7.37 ±0.79]
.125 ±.015
[3.17 ±0.38]
# 20 AWG.
(.032) [0.81]
7741 North Business Park Drive
Tucson, Arizona 85743
Ph: 520-744-0400 Fax: 520-744-6155
Web site: www.tusonix.com E-mail: sales@tusonix.com
S T Y L E 1
# 22 AWG.
(.025) [0.63]
# 6 - 32 UNC - 2A
.125 ±.015
[3.18 ±0.38]
.225 ±.015
[5.72 ±0.38]
.156 ±.015
[3.96 ±0.38]
.450 ±.031
[11.43 ±0.79]
.375 ±.031
[9.53 ±0.79]
.070 MAX.
[1.78 MAX.]
.070 MAX.
[1.78 MAX.]
S T Y L E 2
# 6- 32 UNC - 2A
.125 ±.015
[3.18 ±0.38]
.225 ±.015
[5.72 ±0.38]
.156 ±.015
[3.96 ±0.38]
.500 ±.031
[12.7 ±0.79]
.320 ±.031
[8.13 ±0.79]
S T Y L E 3
# 25 AWG.
(.018) [0.46]
# 6 - 32 UNC - 2A
.125 ±.015
[3.18 ±0.38]
.225 ±.015
[5.72 ±0.38]
.156 ±.015
[3.96 ± 0.38]
.500 ±.031
[12.7 ±0.79]
.320 ±.031
[8.13 ±0.79]
.050 ±.005
[1.27 ±0.13]
S T Y L E 4
# 20 AWG.
(.032) [0.81]
# 6- 32 UNC - 2A
.125 ±.015
[3.18 ±0.38]
.225 ±.015
[5.72 ±0.38]
.156 ±.015
[3.96 ±0.38]
.500 ±.031
[12.7 ±0.79]
.320 ±.031
[8.13 ±0.79]
.032 ±.005
[0.81 ±0.13]
S T Y L E 5
# 6- 32 UNC - 2A
.180 ±.010
[4.60 ±0.25]
.225 ±.015
[5.72 ±0.38]
.173 ±.010
[4.40 ±0.25]
.358 ±.020
[9.09 ±0.50]
.593 MAX.
[15.10 MAX.]
.787 ±.031
[20.00 ±0.50]
.043 MAX.
[1.10 MAX.]
.020 ±.005
[0.50 ±0.13]
# 20 AWG.
(.032) [0.81]
# 20 AWG.
(.032) [0.81]
.039
[1.00]
.039
[1.00]
#6-32 UNC-2A Pi, C & L Filters and Feed-thru Capacitors
10GHz
TUSONIX
Part
Number
Style
Circuit
Working
Voltage
(dc)
85°C 125°C
4260-001
4260-002
4260-000
4402-016
4402-005
4402-018
4402-680
2430-003-X5F0-101M
2430-003-X5F0-102Z
4402-063
4402-060
3
3
3
2
2
2
5
1
1
5
4
Capacitance
(pF)
Capacitance
Tolerance
Current
(A)
Minimum No-Load Insertion Loss
(dB) at 25°C per MIL-Std-220
Pi
Pi
Pi
C
C
C
C
C
C
L
L
--
--
400
50
100
50
300
200
200
200
100
50
50
200
50
100
50
200
100
100
100
100
5500
7500
2000
50,000
10,000
100,000
5
100
1000
4700
27,000
GMV
GMV
GMV
GMV
GMV
GMV
MAX
±20%
+80-20%
+80-20
GMV
3
3
3
10
10
10
10
5
5
10
10
100MHz10MHz 1GHz
--
--
--
15
4
22
--
--
--
--
10
14
18
5
35
21
40
--
--
3
15
28
55
65
42
45
35
47
--
3
20
30
45
70
70
70
70
50
65
--
20
35
45
65
--
--
--
--
--
--
∇
••
••
∇
--
1MHz
--
--
--
--
--
65
--
28
40
55
--
Notes
•• Typical Insertion Loss
∇
No Hex Nut or Lock Washer
inches
[mm]
Drawings not to scale. Please Note: All bushing style filters include hex nut and lock washer unless otherwise noted.
16
10GHz
2430 Z5, Y5, X5
X7
200
100
TUSONIX
Part Number
Temperature
Range
MAX. CAP.
(Nominal)
(pF)
WVDC
1500
1500
Pi Configuration
C Configuration
L Configuration
Please see Temperature Characteristics and EIA Codes on page 25.
Notes:
The products listed in this catalog are only a few of the thou-
sands of variations that TUSONIX produces. For custom
component design, please contact the factory direct.
#8-32 UNC-2A Pi, C & L Filters and Feed-Thru Capacitors
inches
[mm]
Drawings not to scale. Please Note: All bushing style filters include hex nut and lock washer unless otherwise noted.
17
STYLE 1
# 8- 32 UNC - 2A
.093 ±.015
[2.36 ±0.38]
.266 ±.015
[6.76 ±0.38]
.187 ±.015
[4.75 ±0.38]
.890 ±.031
[22.61 ±0.79]
.312 ±.031
[7.92 ±0.79]
STYLE 2
# 18 AWG.
(.040) [1.02]
# 8- 32 UNC - 2A
.093 ±.015
[2.36 ±0.38]
.266 ±.015
[6.76 ±0.38]
.187 ±.015
[4.75 ±0.38]
.575 ±.031
[14.61 ±0.79]
.425 ±.031
[10.80 ±0.79]
STYLE 3
# 8- 32 UNC - 2A
.062 ±.005
[1.57 ±0.13]
.138 ±.010
[3.50 ±0.25]
.187 ±.010
[4.75 ±0.25]
.562 ±.031
[14.27 ±0.79]
.425 ±.031
[10.80 ±0.79]
STYLE 4
# 8- 32 UNC - 2A
.312 ±.031
[7.92 ±0.79]
.475 ±.040
[12.07 ±1.02]
.187 ±.015
[4.75 ±0.38]
.906 ±.031
[23.01 ±0.79]
.093 ±.015
[2.36 ±0.38]
.050 ±.015
[1.27 ±0.38]
.216 ±.015
[5.49 ±0.38]
STYLE 5
# 8- 32 UNC - 2A
.093 ±.010
[2.36 ±0.25]
.187 ±.010
[4.75 ±0.25]
.456 ±.093
[11.58 ±2.36]
.312 ±.031
[7.92 ±0.79]
.276 MAX.
[7.01 MAX.]
.216 ±.010
[5.49 ±0.25]
STYLE 6
# 8- 32 UNC - 2A
.062 ±.005
[1.57 ±0.13]
.138 ±.010
[3.50 ±0.25]
.187 ±.010
[4.75 ±0.25]
.538 ±.031
[13.67 ±0.79]
.462 ±.031
[11.73 ±0.79]
STYLE 7
# 8- 32 UNC - 2A
.093 ±.015
[2.36 ±0.38]
.266 ±.015
[6.76 ±0.38]
.187 ±.015
[4.75 ±0.38]
.450 ±.031
[11.43 ±0.79]
.225 ±.031
[5.72 ±0.79]
STYLE 8
# 8- 32 UNC - 2A
.093 ±.015
[2.36 ±0.38]
.266 ±.015
[6.76 ±0.38]
.187 ±.015
[4.75 ±0.38]
.450 ±.031
[11.43 ±0.79]
.265 ±.031
[6.73 ±0.79]
STYLE 9
# 8- 32 UNC - 2A
.150 ±.015
[3.81 ±0.38]
.320 ±.015
[8.13 ±0.38]
.187 ±.015
[4.75 ±0.38]
.500 ±.031
[12.70 ±0.79]
.320 ±.031
[8.13 ±0.79]
STYLE 10
# 8- 32 UNC - 2A
.123 ±.015
[3.12 ±0.38]
.266 ±.015
[6.76 ±0.38]
.187 ±.015
[4.75 ±0.38]
.421 ±.031
[10.69 ±0.79]
.328 ±.031
[8.33 ±0.79]
# 20 AWG.
(.032) [0.81]
# 18 AWG.
(.040)1.02]
# 20 AWG.
(.032) [0.81]
# 18 AWG.
(.040) [1.02]
# 20 AWG.
(.032) [0.81]
# 18 AWG.
(.040) [1.02]
# 20 AWG.
(.032) [0.81]
# 18 AWG.
(.040) [1.02]
# 20 AWG.
(.032) [0.81]
STYLE 11
# 16 AWG.
(.051) [1.30]
# 8- 32 UNC - 2A
.093 ±.015
[2.36 ±0.38]
.266 ±.015
[6.76 ±0.38]
.187 ±.015
[4.75 ±0.38]
.631 ±.031
[16.03 ±0.79]
.267 ±.031
[6.78 ±0.79]
STYLE 12
# 8- 32 UNC - 2A
.093 ±.015
[2.36 ±0.38]
.266 ±.015
[6.76 ±0.38]
.187 ±.015
[4.75 ±0.38]
.421 ±.031
[10.69 ±0.79]
.328 ±.031
[8.33 ±0.79]
# 18 AWG.
(.040) [1.02]
7741 North Business Park Drive
Tucson, Arizona 85743
Ph: 520-744-0400 Fax: 520-744-6155
Web site: www.tusonix.com E-mail: sales@tusonix.com
#8-32 UNC-2A Pi, C & L Filters and Feed-Thru Capacitors
TUSONIX
Part
Number
Style
Circuit
Working
Voltage
(dc)
85°C 125°C
4251-001
4201-048
4201-047
4201-502
4201-000
4201-001
4201-004
4201-006
4201-501
4201-503
4201-003
4201-050
4201-051
4201-053
4201-083
4251-004
4205-002
4205-018
4205-017
4205-001
4251-000
4251-002
2425-018-X5U0-101M
2425-544-X7R0-101M
2425-018-X5U0-102M
2425-544-X7R0-102P
2425-018-X5W0-502M
2425-601-X5W0-103Z
4404-001
4404-002
4404-003
4404-050
8
15
15
5
1
1
1
1
1
4
2
1
1
1
9
9
3
6
6
3
7
9
11
11
11
11
11
14
1
12
10
13
Capacitance
(pF)
Capacitance
Tolerance
Current
(A)
Minimum No-Load Insertion Loss
(dB) at 25°C per MIL-Std-220
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
C
C
C
C
C
C
C
C
C
L
--
200
200
--
200
200
200
200
--
--
200
200
200
200
200
100
250
250
250
250
185
200
200
200
200
200
200
200
100
140
--
--
50
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
125
125
125
125
125
125
100
100
100
100
100
100
100
100
100
100
15,000
100
1000
1000
1500
1500
1500
1500
1500
1500
2000
5500
5500
5500
10,000
28,000
65
65
1500
1500
3000
12,000
100
100
1000
1000
5000
10,000
27,000
50,000
100,000
22,000
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
+80-20%
GMV
+100 -0%
+100 -0%
GMV
GMV
+100 -0%
GMV
±20%
±20%
±20%
+100 -0%
±20%
+80-20%
GMV
GMV
GMV
GMV
10
15
15
10
10
10
15
15
10
10
15
10
10
15
10
10
15
15
15
15
15
10
20
20
20
20
20
20
10
10
10
10
100MHz10MHz 1GHz 10GHz
5
--
--
--
--
--
--
--
--
--
--
--
--
--
--
10
--
--
--
--
--
5
--
--
--
--
--
--
10
15
20
7
18
--
4
--
5
5
5
5
--
--
5
14
14
14
18
38
--
--
5
5
10
28
--
--
3
3
15
20
30
34
38
27
65
5
37
65
45
45
38
38
45
45
38
55
55
55
65
75
3
3
35
35
30
65
3
3
20
20
30
35
45
45
47
43
70
32
60
70
65
65
63
63
60
60
63
70
70
65
70
75
16
16
60
60
65
70
20
20
35
35
45
50
55
60
65
60
Notes
--
❒❒
❒❒
❒
❒❒
❒❒
❒
--
--
♦
∇
♦∇
♦
--
--
--
♦
♦∇
--
--
--
--
--
--
--
--
••♦
••
••♦
••
••♦
••
♦
--
--
--
MIL-PRF-
15733
Number
--
--
--
/61-0008
--
--
--
--
/28-0001
/28-0002
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
70
70
70
70
70
60
60
70
70
70
65
70
75
45
45
60
60
65
70
28
28
40
40
50
55
--
--
--
--
1MHz
♦ Turret Lead
∇ ∇
∇ ∇
∇ #18 AWG Lead 0.040 Dia.
•• ••
•• ••
•• Typical Insertion Loss
❒❒
❒❒
❒ No hex nut or Lockwasher
inches
[mm]
Drawings not to scale. Please Note: All bushing style filters include hex nut and lock washer unless otherwise noted. 18
Series
Number
Temperature
Range
MAX. Cap.
(Nominal)
(pF)
2425
WVdc
Z5, Y5, X5
X7
200
100
10,000
10,000
Pi Configuration
C Configuration
L Configuration
Please see Temperature Characteristics and EIA Codes on page 25.
Notes:
STYLE 13
# 8- 32 UNC - 2A
.093 ±.015
[2.36 ±0.38]
.266 ±.015
[6.76 ±0.38]
.187 ±.015
[4.75 ±0.38]
.850 ±.031
[21.59 ±0.79]
.280 ±.031
[7.11 ±0.79]
# 18 AWG.
(.040) [1.02]
STYLE 14
# 8- 32 UNC - 2A
.150 ±.015
[3.81 ±0.38]
.320 ±.015
[8.13 ±0.38]
.187 ±.015
[4.75 ±0.38]
.563 ±.031
[14.30 ±0.79]
.390 ±.031
[9.91 ±0.79]
# 16 AWG.
(.051) [1.30]
.050
[1.27]
.150
[3.81]
.238
[6.05]
.497 [12.62]
REF.
.616 ±.015
[
15.65 ±0.38
]
.347 [8.81]
REF.
.378 [9.60]
REF.
.185
[4.70]
.045 [1.14]
SQUARE
.030
[0.76]
.040
[1.02]
.040 + .000
-.002
[2.02 +.000
-0.05]
DIA.
45˚ X.005
[0.13]
RADIUS
# 8- 32 UNC - 2A
STYLE 15
The products listed in this catalog are only a few of the thou-
sands of variations that TUSONIX produces. For custom
component design, please contact the factory direct.
STYLE 1
# 20 AWG.
(.032) [0.81] # 12- 28 UNF - 2A
.187 ±.015
[4.75 ±0.38]
.281 ±.015
[7.14 ±0.38]
.453 ±.031
[11.51 ±0.79]
.359 ±.031
[9.12 ±0.79]
STYLE 2
.030 [0.76]
DIA.
# 8 - 36
UNF - 2A
.090 ±.010
[2.29 ±0.25]
.015 ±.005
[0.38 ±0.13]
.360 ±.020
[9.14 ±0.51]
.240 ±.020
[6.10 ±0.51]
COLOR CODE
.040 ±.005
[1.02 ±0.13]
STYLE 3
# 12- 28 UNF - 2A
.156 ±.015
[3.96 ±0.38] .312 ±.015
[7.92 ±0.38]
.250 ±.015
[6.35 ±0.38]
.484 ±.031
[12.29 ±0.79]
.328 ±.031
[8.33 ±0.79]
STYLE 4
# 16 AWG.
(.051) [1.29] # 12- 28 UNF - 2A
.156 ±.015
[3.96 ±0.38]
.312 ±.015
[7.92 ±0.38]
.250 ±.015
[6.35 ±0.38]
1.000 ±.031
[25.40 ±0.79]
.250 ±.031
[6.35 ±0.79]
STYLE 5
# 16 AWG.
(.051) [1.29]
.269 ±.015
[6.83 ±0.38]
.312 ±.015
[7.92 ±0.38]
1.131 ±.031
[28.73 ±0.79]
.156 REF.
[3.96 REF.]
.156 REF.
[3.96 REF.]
.625 ±.015
[15.88 ±0.38]
.344
[8.74]
.063
[1.60] .125 ±.015
[3.18 ±0.38]
# 20 AWG.
(.032) [0.81]
.250 ±.015
[6.35 ±0.38]
# 12-28 UNF - 2A
.187 ±.005
[4.75 ±0.13]
#8-36 UNF-2A and #12-28 UNF-2A Pi & C Filters and Feed-Thru Capacitors
inches
[mm]
Drawings not to scale. Please note: All bushing style filters include hex nut and lock washer unless otherwise specified.
19
TUSONIX
Part
Number
Style
Circuit
Working
Voltage
(dc)
85°C 125°C
4401-005
4401-006
4401-010
4401-011
4401-003
4401-004
4401-680
4401-008
4401-009
4401-000
4401-001
4401-007
4401-002
4202-053
4202-054
4204-050
4204-051
4202-020
4202-021
4204-000
4204-001
4204-500
4204-501
2499-003-X5U0-102P
2499-003-X5W0-502P
2499-003-X5W0-103Z
357-001-X5W0-103Z
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
1
1
3
3
1
1
1
1
4
4
4
5
Capacitance
(pF)
Capacitance
Tolerance
Current
(A)
Minimum No-Load Insertion Loss
(dB) at 25°C per MIL-Std-220
C
C
C
C
C
C
C
C
C
C
C
C
C
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
C
C
C
C
50
50
50
50
100
100
200
200
200
200
200
200
200
100
100
100
100
200
200
200
200
200dc
140ac
200dc
140ac
250
250
250
250
10,000
15,000
27,000
50,000
2700
5000
5
10
25
100
500
1000
1200
5000
5000
5000
5000
1500
1500
1500
1500
1500
1500
1000
5000
10,000
10,000
GMV
GMV
GMV
GMV
GMV
GMV
MAX
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
+100-0%
+100-0%
+80-20%
+80-20%
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10ac
10ac
20
20
20
20
100MHz10MHz 1GHz 10GHz
4
7
10
15
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
21
20
28
35
10
15
--
--
--
--
--
5
5
20
20
20
20
5
5
5
5
--
--
3
15
20
20
35
35
42
45
25
30
--
--
--
3
15
20
20
65
65
65
65
45
45
45
45
45
--
20
30
35
35
50
55
65
70
40
45
--
5
10
20
35
35
35
70
70
70
70
70
70
70
70
70
45
35
45
50
50
Notes
∇
∇
∇
∇
∇
∇
∇
∇
∇
∇
∇
∇
∇
--
♦
--
♦
--
♦
--
♦
--
♦
••
••
••
••
MIL-PRF-
15733
Number
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
/61-0001
/43-0001
--
--
--
--
60
60
65
--
50
55
--
20
25
28
40
45
45
70
70
70
70
70
70
70
70
70
45
40
50
55
55
1MHz
70
70
70
50
150
150
300
300
300
300
300
300
300
200
200
200
200
350
350
350
350
--
--
500
500
500
500
C Configuration
Pi Configuration
C Configuration
Please see Temperature Characteristics and EIA Codes on Page 25.
Z5, Y5, X5
X7
Z5, Y5, X5
X7
500
250
500
250
10,000
10,000
10,000
10,000
2499
357
MAX. CAP.
Nominal
(pF)
WVDC
Temperature
Range
Series
Number Notes:
♦ Turret Lead
•• ••
•• ••
•• Typical Insertion Loss
∇ No Hex Nut Included
7741 North Business Park Drive
Tucson, Arizona 85743
Ph: 520-744-0400 Fax: 520-744-6155
Web site: www.tusonix.com E-mail: sales@tusonix.com
STYLE 2
# 20 AWG.
(.032) [0.81] # 12- 32 UNEF - 2A
.240 ±.015
[6.10 ±0.38]
.921 ±.031
[23.40 ±0.79]
.343 ±.031
[8.71 ±0.79]
.187 ±.015
[4.75 ±0.38]
STYLE 1
# 20 AWG.
(.032) [0.81]
# 12- 32 UNEF - 2A
.187 ±.015
[4.75 ±0.38]
.281 ±.015
[7.14 ±0.38]
.250 ±.015
[6.35 ±0.38]
.453 ±.031
[11.51 ±0.79]
.359 ±.031
[9.12 ±0.79]
.311 ±.015
[7.90 ±0.38]
.157 ±.015
[3.99 ±0.38]
STYLE 3
# 12- 32 UNEF - 2A
.156 ±.015
[3.96 ±0.38]
.405 ±.010
[10.29 ±0.25]
.250 ±.015
[6.35 ±0.38]
.680 ±.031
[17.27 ±0.79]
.468 ±.031
[11.89 ±0.79]
.187 ±.015
[4.75 ±0.38]
.125 ±.015
[3.17 ±0.38]
STYLE 4
.062
[1.57] # 12- 32 UNEF - 2A
.140 ±.015
[3.56 ±0.38]
.208 ±.015
[5.28 ±0.38]
.312 ±.015
[7.92 ±0.38]
.468 ±.031
[11.89 ±0.79]
.406 ±.031
[10.31 ±0.79]
STYLE 5
# 12- 32 UNEF - 2A
.156 ±.015
[3.96 ±0.38]
.405 ±.010
[10.29 ±0.25]
.250 ±.015
[6.35 ±0.38]
.712 ±.050
[18.08 ±1.27]
.437 ±.031
[11.10 ±0.79]
.187 ±.015
[4.75 ±0.38]
.125 ±.015
[3.18 ±0.38]
# 20 AWG.
(.032) [0.81]
# 20 AWG.
(.032) [0.81]
"A"/ "B"
#12-32 UNEF-2A Pi, & C Filters
Drawings not to scale. Please note: All bushing style filters include hex nut and lock washer unless otherwise specified. 20
Please see Temperature Characteristics and EIA Codes on page 25.
Notes:
♦ Turret Lead
∇ ∇
∇ ∇
∇ #18 AWG Lead 0.040 [1.02] Dia.
“A” Dim. A in #2= .250 ± .015 [6.35 ± 0.38]
“B” Dim. A in #2= .235 ± .015 [5.97 ± 0.38]
•• Typical Insertion Loss
2452 Z5, Y5, X5
X7
500
250
TUSONIX
Part Number
Temperature
Range
MAX. CAP.
(Nominal)
(pF)
WVdc
1800
1800
TUSONIX
Part
Number
Style
Circuit
Working
Voltage
(dc)
85°C 125°C
4207-003
4253-002
4202-050
4202-051
4203-050
4203-051
4203-053
4203-551
4203-553
4253-001
4253-000
4202-000
4203-000
4202-001
4202-501
4203-003
4203-501
4203-552
4207-000
4207-001
4202-004
2452-000-X7R0-101M
2452-000-X7R0-471M
2452-000-X5U0-102P
3
3
1
1
2
2
2
2
2
2
3
1
2
1
1
2
2
2
5
5
1
4
4
4
Capacitance
(pF)
Capacitance
Tolerance
Current
(A)
Minimum No-Load Insertion Loss
(dB) at 25°C per MIL-Std-220
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
Pi
C
C
C
100
100
200
200
200
200
200
--
--
--
--
350
350
350
--
350
--
--
500
500
500
500
500
500
70
70
100
100
100
100
100
100dc
70ac
100dc
70ac
100
140
200
200
200
200dc
140ac
200
200dc
140ac
100dc
70ac
300
300
350
250
250
250
12,000
50,000
5000
5000
5000
5000
5000
5000
5000
25,000
22,000
1500
1500
1500
1500
1500
1500
5000
1200
4000
2500
100
470
1000
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
GMV
±20%
±20%
+100-0%
10
10
10
10
10
10
10
10ac
10ac
10
10
10
10
10
10ac
10
10ac
10ac
10
10
15
20
20
20
100MHz10MHz 1GHz 10GHz
45
60
20
20
20
20
20
--
--
30
45
5
5
5
--
5
--
--
5
15
5
--
--
3
70
75
65
65
65
65
65
65
65
65
75
45
45
45
45
45
45
65
43
55
50
3
12
20
70
75
70
70
70
70
70
70
70
70
75
70
70
70
70
70
70
70
55
60
70
20
27
35
70
75
70
70
70
70
70
70
70
70
75
70
70
70
70
70
70
70
55
60
70
28
27
40
Notes
--
--
--
♦
--
♦
♦A
♦B
♦A
♦
--
--
--
♦
♦
♦A
♦B
♦A
--
--
∇
••
••
••
MIL-PRF-
15733
Number
--
--
--
--
--
--
--
/61-0011
/61-0010
--
--
--
--
--
/61-0002
--
/61-0006
/61-0007
--
--
--
--
--
--
Pi Configuration
C Configuration
inches
[mm]
The products listed in this catalog are only a few of the thou-
sands of variations that TUSONIX produces. For custom
component design, please contact the factory direct.
1/4-28 and 5/16-24 UNF-2A and 5/16-32 UNEF-2A Pi Filters and Feed-Thru Capacitors
inches
[mm]
Drawings not to scale. Please note: All bushing style filters include hex nut and lock washer unless otherwise specified.
21
TUSONIX
Part
Number
Style
Circuit
Working
Voltage
(dc)
85°C 125°C
327-010-X5U0-102M
327-010-X5U0-152M
327-010-X5U0-502P
327-010-X7W0-103Z
2432-002-X5R0-101M
2432-002-X5S0-471M
2432-002-X5U0-502M
2432-002-X5W0-752Z
2432-002-X7R0-102M
4206-016
4206-501
4206-502
4206-006
2
2
2
2
3
3
3
3
3
1
4
4
1
Capacitance
(pF)
Capacitance
Tolerance
Current
(A)
Minimum No-Load Insertion Loss
(dB) at 25°C per MIL-Std-220
C
C
C
C
C
C
C
C
C
Pi
Pi
Pi
Pi
500
500
500
500
2000
2000
2000
2000
2000
1000
--
--
1000
250
250
250
250
1000
1000
1000
1000
1000
--
500dc
350ac
500dc
350ac
500
1000
1500
5000
10,000
100
470
5000
7500
1000
1000
2000
2000
3000
±20%
±20%
+100-0%
+80-20%
±20%
±20%
±20%
+80-20%
±20%
GMV
GMV
GMV
GMV
20
20
20
20
20
20
20
20
20
25
25ac
25ac
25
100MHz10MHz 1GHz 10GHz
3
5
15
20
--
--
15
15
3
3
--
--
10
20
22
30
35
3
12
30
30
20
35
55
55
55
35
35
45
50
20
27
45
45
35
65
70
70
70
40
40
50
55
27
27
50
50
40
65
70
70
70
Notes
••
••
••
••
••
••
••
••
••
--
--
∇
--
MIL-PRF-
15733
Number
--
--
--
--
--
--
--
--
--
--
/61-0004
/61-0003
--
Notes:
∇ 5/16-24 UNF-2A Thread
•• Typical Insertion Loss
327
2432
Z5, Y5, X5
X7
Z5, Y5, X5
X7
500
250
2000
1000
TUSONIX
Part Number
Temperature
Range
MAX. CAP.
(Nominal)
(pF)
WVDC
10,000
10,000
7,000
7,000
C Configuration
C Configuration
Pi Configuration
Please see Temperature Characteristics and EIA Codes on page 25.
STYLE 1
5/16 - 32 UNEF - 2A
.250 ±.010
[6.35 ±0.25]
.437 ±.010
[11.10 ±0.25]
.375 ±.010
[9.53 ±0.25]
.750 ±.031
[19.05 ±0.79]
.562 ±.031
[14.27 ±0.79]
.050 ±.010
[1.27 ±0.25]
(2) PLCS.
# 15 AWG.
(.057) [1.45]
STYLE 2
1/4 - 28 UNF - 2A
.313 ±.015
[7.95 ±0.38]
.219 ±.015
[5.56 ±0.38]
.312 ±.015
[7.92 ±0.38]
1.250 ±.031
[31.75 ±0.79]
.750 ±.031
[19.05 ±0.79]
.125 ±.031
[3.18 ±0.79]
# 16 AWG.
(.051) [1.30]
.250 ±.031
[6.35 ±0.79]
STYLE 3
5/16 - 24 UNF - 2A
.062 ±.015
[1.57 ±0.38]
.562 ±.031
[14.27 ±0.79]
.375 ±.015
[9.53 ±0.38]
.300 ±.015
[7.62 ±0.38]
1.750 ±.031
[44.45 ±0.79]
.438 ±.031
[11.13 ±0.79]
# 16 AWG.
(.051) [1.30]
.250 ±.003
[6.35 ±0.08]
.875 ±.031
[22.23 ±0.79]
.060 ±.010
[1.52 ±0.25]
STYLE 4
5/16 - 32 UNEF - 2A
.250 ±.010
[6.35 ±0.25]
.437 ±.010
[11.10 ±0.25]
.375 ±.010
[9.53 ±0.25]
.750 ±.031
[19.05 ±0.79]
.562 ±.031
[14.27 ±0.79]
.050 ±.010
[1.27 ±0.25]
(2) PLCS.
# 15 AWG.
(.057) [1.45]
.220 ±.010
[5.59 ±0.25]
7741 North Business Park Drive
Tucson, Arizona 85743
Ph: 520-744-0400 Fax: 520-744-6155
Web site: www.tusonix.com E-mail: sales@tusonix.com
Metric Bushing Filters
TUSONIX
Part
Number
Style
Circuit
Working
Voltage
(dc)
85°C 125°C
4400-093
4400-098
4400-099
4400-094
4400-095
4400-683
4400-076
4400-096
4400-097
4209-053
4209-003
2499-523-Y5R0-102P
1
1
1
1
1
1
1
1
1
2
2
3
Capacitance
(pF)
Capacitance
Tolerance
Current
(A)
Minimum No-Load Insertion Loss
(dB) at 25°C per MIL-Std-220
C
C
C
C
C
C
C
C
C
Pi
Pi
C
70
70
50
150
300
300
300
300
150
350
350
500
50
50
50
100
200
200
200
200
100
100
200
250
10,000
27,000
50,000
4700
1000
5
100
470
2700
5500
1500
1000
+80-20%
GMV
GMV
GMV
GMV
MAX
GMV
GMV
GMV
GMV
GMV
+100-0%
10
10
10
10
10
10
10
10
10
10
10
20
100MHz10MHz 1GHz 10GHz
20
28
35
15
5
--
--
--
10
20
5
3
35
42
45
30
20
--
3
15
25
65
45
20
50
55
70
45
35
--
20
35
40
70
70
35
50
60
--
55
45
--
28
40
50
70
70
40
1MHz
4
10
15
--
--
--
--
--
--
--
--
--
Drawings not to scale. Please note: All bushing style filters include hex nut and lock washer unless otherwise specified.
22
inches
[mm]
•• Typical Insertion Loss
Notes
--
--
--
--
--
--
--
--
--
--
--
••
Series
Number
Temperature
Range
MAX. CAP.
Nominal
(pF)
2499
WVdc
Z5, Y5, X5
X7
500
250
5000
5000
M3 Thread
M5 Thread
Please see Temperature Characteristics and EIA Codes on page 25.
Notes:
.433 ±.039
[11.0 ±1.00]
M3 X 0.5 - 6g
.118 ±.006
[3.00 ±0.15]
.472 ±.039
[12.0 ±1.00]
.031 ±.002
[ 0.79 ±0.05]
.157±.008
[4.00 ±0.20]
.905 ±.079
[23.00 ±2.00]
.038 MAX.
[0.97 MAX.]
.157 ±.020
[4.00 ±0.50]
STYLE 1
.030 MAX.
[0.76 MAX.]
.343 ±.031
[8.71 ±0.79]
M5 X 0.8 - 6g
.060 MAX.
[1.52 MAX.]
.921 ±.031
[23.39 ±0.79]
.187±.015
[4.75 ±0.38]
.157 ±.015
[4.00 ±0.38]
.240 ±.015
[6.10 ±0.38]
STYLE 2
.060 MAX.
[1.52 MAX.]
.250±.015
[6.35 ±0.38]
# 20 AWG.
(.032) [0.81]
.453 ±.039
[7.01 ±0.51]
M5 X 0.8 - 6g
.098 MAX.
[2.48 MAX.]
.649 ±.039
[16.48 ±1.00]
.138 ±.020
[3.51 ±0.51]
.394 ±.008
[10.01 ±0.20]
STYLE 3
.100 MAX.
[2.54 MAX.]
.276±.020
[7.01 ±0.51]
# 16 AWG.
(.051) [1.29]
The products listed in this catalog are only a few of the thou-
sands of variations that TUSONIX produces. For custom
component design, please contact the factory direct.
Coaxial Broadband Filter 1/4-28 UNF-2A
inches
[mm]
Drawings not to scale. All bushing style filters include hex nut and lock washer unless otherwise noted.
23
TUSONIX
Part
Number
Style
Circuit
Working
Voltage
(dc)
85°C 125°C
Capacitance
(pF)
Minimum No-Load Insertion Loss
(dB) at 25°C per MIL-Std-220
C
C
C
C
C
C
C
C
C
L
L
L
L
L
L
L
L
C
C
C
C
C
C
C
C
C
C
L
L
L
L
L
L
L
L
L
L
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
280
280
100
100
100
100
100
100
100
100
280
280
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
50
70
50
50
70
70
70
70
50
50
50
50
10pF Max
0.7 μF
0.7 μF
0.7 μF
0.7 μF
1.4 μF
1.4 μF
1.4 μF
1.4 μF
0.7 μF
0.7 μF
0.7 μF
0.7 μF
1.4 μF
1.4 μF
1.4 μF
1.4 μF
0.7 μF
0.7 μF
0.7 μF
0.7 μF
1.4 μF
1.4 μF
1.4 μF
1.4 μF
.15 μF
.15 μF
0.7 μF
0.7 μF
0.7 μF
0.7 μF
1.4 μF
1.4 μF
1.4 μF
1.4 μF
.15 μF
.15 μF
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
1MHz300KHz 10MHz 1GHz
--
29
29
29
29
34
34
34
34
29
29
29
29
34
34
34
34
29
29
29
29
34
34
34
34
15
15
29
29
29
29
34
34
34
34
15
15
--
39
39
39
39
44
44
44
44
39
39
39
39
44
44
44
44
39
39
39
39
44
44
44
44
25
25
39
39
39
39
44
44
44
44
25
25
--
52
52
52
52
60
60
60
60
52
52
52
52
60
60
60
60
52
52
52
52
60
60
60
60
40
40
52
52
52
52
60
60
60
60
40
40
--
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
60
60
70
70
70
70
70
70
70
70
60
60
30KHz 100KHz
Dim.
A
inch
[mm]
Dim.
B
inch
[mm]
.187 [4.75]
.187 [4.75]
.312 [7.93]
.187 [4.75]
.312 [7.93]
.187 [4.75]
.312 [7.93]
.187 [4.75]
.312 [7.93]
.187 [4.75]
.312 [7.93]
.187 [4.75]
.312 [7.93]
.187 [4.75]
.312 [7.93]
.187 [4.75]
.312 [7.93]
.187 [4.75]
.312 [7.93]
.187 [4.75]
.312 [7.93]
.187 [4.75]
.312 [7.93]
.187 [4.75]
.312 [7.93]
.187 [4.75]
.187 [4.75]
.187 [4.75]
.312 [7.93]
.187 [4.75]
.312 [7.93]
.187 [4.75]
.312 [7.93]
.187 [4.75]
.312 [7.93]
.187 [4.75]
.187 [4.75]
.350 [8.89]
.367 [9.32]
.492 [12.50]
.350 [8.89]
.475 [12.07]
.367 [9.32]
.492 [12.50]
.350 [8.89]
.475 [12.07]
.367 [9.32]
.492 [12.50]
.350 [8.89]
.475 [12.07]
.367 [9.32]
.492 [12.50]
.350 [8.89]
.475 [12.07]
.367 [9.32]
.492 [12.50]
.350 [8.89]
.475 [12.07]
.367 [9.32]
.492 [12.50]
.350 [8.89]
.475 [12.07]
.367 [9.32]
.350 [8.89]
.367 [9.32]
.492 [12.50]
.350 [8.89]
.475 [12.07]
.367 [9.32]
.492 [12.50]
.350 [8.89]
.475 [12.07]
.367 [9.32]
.350 [8.89]
4601-009
4600-005
4600-006
4601-005
4601-006
4600-000
4600-002
4601-000
4601-002
4600-055
4600-056
4601-055
4601-056
4600-050
4600-052
4601-050
4601-052
4600-007
4600-008
4601-007
4601-008
4600-003
4600-004
4601-003
4601-004
4600-009
4601-010
4600-057
4600-058
4601-057
4601-058
4600-053
4600-054
4601-053
4601-054
4600-059
4601-059
2
1
1
2
2
1
1
2
2
1
1
2
2
1
1
2
2
1
1
2
2
1
1
2
2
1
2
1
1
2
2
1
1
2
2
1
2
--
9
9
9
9
15
15
15
15
9
9
9
9
15
15
15
15
9
9
9
9
15
15
15
15
--
--
9
9
9
9
15
15
15
15
--
--
--
20
20
20
20
25
25
25
25
20
20
20
20
25
25
25
25
20
20
20
20
25
25
25
25
7
7
20
20
20
20
25
25
25
25
7
7
X7R Temperature Characteristic
Current
(A)
X7W Temperature Characteristic
200dc
125ac
200dc
125ac
200dc
125ac
200dc
125ac
1/4 - 28
UNF - 2A THD.
.200 ±.010
[5.08 ±0.25]
.385 MAX.
[ 9.78 MAX.]
STYLE 1
.325 MAX.
[ 8.26 MAX.]
B
MAX.
# 18 (.040) AWG.
[1.02]
.175 REF.
[ 4.45 REF.]
A ±.010
[ 0.25]
STYLE 2
1/4 - 28
UNF - 2A THD.
.200 ±.010
[5.08 ±0.25]
.385 MAX.
[ 9.78 MAX.]
.335 MAX.
[ 8.51 MAX.]
B
MAX.
.050 X .070 SLOT
[1.27] [1.78] REF.
BOTH ENDS.
.175 REF.
[ 4.45 REF.]
A ±.010
[ 0.25]
Hermetic Seal
.385 MAX.
[9.78 MAX.]
STYLE 3
1.175 MAX.
[ 29.85 MAX.
]
.624 ±.025
[15.85 ±0.64]
.175 REF.
[ 4.45 REF.]
.312 REF.
[ 7.92 REF.]
.200 ±.010
[5.08 ±0.25]
1/4 - 28
UNF - 2A THD.
QUICK DISCONNECT
TERMINAL - CRIMPED
& SOLDERED.
# 15 (.057) AWG.
[1.45]
7741 North Business Park Drive
Tucson, Arizona 85743
Ph: 520-744-0400 Fax: 520-744-6155
Web site: www.tusonix.com E-mail: sales@tusonix.com
Coaxial Broadband Filter 1/4-28 UNF-2A and Standard Hardware Dimensions
24
STANDARD HARDWARE DIMENSIONS
1. Dimensions: Inches [metric]
Dimensional Tolerance:
± .005 [0.13], thread tolerance class 2.
2. Standard finish: Silver
3. Nut material: Brass
Washer material: Phosphor Bronze
4. When mounting filter without hardware,
into tapped hole, the mounting torque
applied to the filter body must be no
more than 1/2 the torque limits listed on
the chart to the left.
3
3
3
3
3
3
3
Characteristics
HEX NUT
A
LOCK WASHER
.187 [4.75]
.187 [4.75]
.187 [4.75]
.250 [6.35]
--
.250 [6.35]
I
I
I
I
I
I
I
I
I
I
I
I
S
S
S
E
CD
NUT
THREAD
SIZE
MOUNTING
TORQUE
LIMITS
4-40 UNC
6-32 UNC
6-40 UNF
8-32 UNC
8-36 UNF
12-28 UNF
12-32 UNEF
1/4-28 UNF
5/16-24 UNF
5/16-32 UNEF
3/8-32 UNEF
M3 X 0.5
M5 X 0.8 6g
2 lb.in.
[.226 N-m]
2 lb.in.
[.226 N-m]
3 lb.in.
[.339 N-m]
5 lb.in.
[.565 N-m]
1lb.in.
[.113 N-m]
8 lb.in.
[.904 N-m]
8 lb.in.
[.904 N-m]
8 lb.in.
[.904 N-m]
9 lb.in.
[1.02 N-m]
9 lb.in.
[1.02 N-m]
9 lb.in.
[1.02 N-m]
2 lb.in.
[.226 N-m]
7 lb.in.
[.790 N-m]
.220 [5.59]
.283 [7.19]
.283 [7.19]
.283 [7.19]
.283 [7.19]
.387 [9.83]
.387 [9.83]
.387 [9.83]
.420 [10.6]
.430[10.92]
.430 [10.92]
.500 [12.70]
.192 [4.88]
.277 [7.04]
.361 [9.17]
TYPE
.250 [6.35]
.250 [6.35]
.313 ± .015
[7.95 ± 0.38]
.375 ± .010
[9.53 ± 0.25]
.375 ± .010
[9.53 ± 0.25]
.500 ± .010
[12.7 ± 0.25]
.187 ± .010
[4.75 ± 0.25]
.062 [1.57]
.062 [1.57]
.062 [1.57]
.075 [1.91]
--
.075 [1.91]
.090 [2.29]
.090 [2.29]
.090 [2.29]
.062 [1.57]
.075 [1.91]
.100 [2.54]
.125 ± .015
[3.18 ± 0.38]
.120 [3.05]
.146 [3.71]
.146 [3.71]
.167 [4.24]
.167 [4.24]
.220 [5.59]
.220 [5.59]
.220 [5.59]
.262 [6.65]
.318 [8.08]
.318 [8.08]
.384 [9.75]
.118 [2.99]
.172 [4.37]
.225 [5.72]
.015 [0.38]
.017 [0.43]
.017 [0.43]
.018 [0.46]
.015 [0.38]
.022 [0.56]
.022 [0.56]
.022 [0.56]
.025 [0.63]
.022 [0.56]
.022 [0.56]
.022 [0.56]
.025 [0.63]
.034 [0.86]
.050 [1.27]
.250 [6.35] .075 [1.91]
TUSONIX
Part
Number
Style
Circuit
Working
Voltage
(dc)
85°C 125°C
Capacitance
(pF)
Current
(A)
Minimum No-Load Insertion Loss
(dB) at 25°C per MIL-Std-220
C
C
C
L
L
L
L
100
100
280
100
100
100
280
70
50
70
70
50
0.7 μF
1.4 μF
.15 μF
0.7 μF
1.2 μF
1.4 μF
.15 μF
20
20
20
20
30
20
20
1MHz300KHz 10MHz 1GHz
29
34
15
29
34
34
15
39
44
25
39
44
44
25
52
60
40
40
52
60
60
70
70
60
70
70
70
60
30KHz 100KHz
Dim.
A
inch
[mm]
Dim.
B
inch
[mm]
--
--
--
--
--
--
--
--
--
--
--
--
--
--
4600-014
4600-015
4600-016
4600-070
4600-067
4600-071
4600-072
9
15
--
9
15
15
--
20
25
7
20
25
25
7
200dc
125ac
200dc
125ac
Notes
--
--
--
--
▲
--
--
Notes:
▲ 12 AWG .081[2.06] Lead and
X7W Temp. Characteristic
X7R Temperature Characteristic
B
TYPE I
HEX NUT
TYPE S
AB
C
D (CLEAR)
EEC
D
The products listed in this catalog are only a few of the thou-
sands of variations that TUSONIX produces. For custom
component design, please contact the factory direct.
Product Installation Recommendations and EIA codes
PRODUCT INSTALLATION RECOMMENDATIONS
The components in this catalog are manufactured with ceramic dielectrics. To minimize possible damage to the components
during installation, the recommendations below should be followed. For information concerning other installation require-
ments and/or component modifications, consult TUSONIX Customer Engineering at (520) 744-0400.
General Recommendations
Handling: Excessive force or direct impact to the component may result in breakage. Lead bending or cutting,
if necessary, should be done with a support for the lead to prevent mechanical stress to the
component. Components with required lead modifications are available from TUSONIX.
Lead Soldering: Use a temperature controlled soldering iron with SN60 or SN63 RMA Flux core wire. Maximum
soldering temperature to be 500°F(260°C) with a dwell time of 3 seconds maximum. The use of a
heat sink between the component body and the solder joint is highly recommended.
Flux Removal: Optimum flux removal can be achieved by vapor degreasing the components immediately after the
soldering operation. Total immersion of the components is not recommended.
Solder Mount Recommendations
Mounting: Use a convection or infrared oven and SN60 or SN63 solder paste, or solder preforms, with RMA
Flux. The oven profile should slowly heat the entire assembly to a reflow temperature of 430°F
(221°C), with a rate of change not to exceed 5°F,3°C/Sec. and a dwell time as short as possible.
Internal Use a temperature controlled soldering iron with SN62 silver bearing (2%) RMA Flux core solder
Electrode wire. The components should be preheated to 300°F (150°C), then soldered with a maximum
Soldering: temperature of 500°F (260°C) and a dwell of 3 seconds maximum.
Bushing Mount Recommendations
For Mounting Torque, please see standard hardware dimensions table on page 24.
EIA/Tusonix Tolerance Codes
TEMPERATURE
CHARACTERISTICS
CAPACITANCE
TOLERANCE
EIA Code Temperature Range
+10°C to +85°C
-30°C to +85°C
-55°C to +85°C
-55°C to +125°C
± 3.3%
± 4.7%
± 7.5%
± 10%
± 15%
± 22%
+ 22% -33%
+ 22% -56%
+ 22% -82%
+ 22% -90%
Z5
Y5
X5
X7
D
E
F
P
R
S
T
U
V
W
EIA Code Maximum Cap. Change
Nominal
Capacitnce
10 pF or
Less
Code
Nominal
Capacitnce
over 10 pF
GMV◆
± 0.1 pF
± 0.25 pF
± 0.5 pF
± 0.3 pF
± 1 pF
± 2 pF
± 3%
± 5%
± 10%
± 2%
AA
A
B
C
D
E
F
G
H
I
J
K
L
GMV◆
+50% -20%
± 0.10%
± 0.25%
± 0.50%
+70% -30%
± 1%
± 2%
± 3%
+60% -40%
± 5%
± 10%
+100% -40%
CAPACITANCE
TOLERANCE (Cont.)
Nominal
Capacitnce
10 pF or
Less
Code
Nominal
Capacitnce
over 10 pF
± 20%
± 0.4 pF
± 0.2 pF
MAX.
M
N
P
Q
R
S
T
U
V
W
X
Y
Z
± 20%
± 30%
+100% -0%
± 15%
± 2.5%
+50% -15%
+30% -20%
+80% -0%
± 7%
+50% -30%
+40% -10%
+50% -0%
+80% -20%
25
◆GMV: TUSONIX Code: Guarantied Minimum Value Please note: Maximum Capacitance for each part
number is determined by the required operating
temperature range and maximum capacitance
change.
7741 North Business Park Drive
Tucson, Arizona 85743
Ph: 520-744-0400 Fax: 520-744-6155
Web site: www.tusonix.com E-mail: sales@tusonix.com
General Test Specifications
The Components shown in this catalog have been designed and subjected to the following test
plan, as is applicable for the individual components. The information shown can be used as a
basis for component specifications. For additional information, please consult Customer Engi-
neering at (520) 744-0400.
Filters governed by MIL-PRF-15733 shall be inspected and tested to the requirements of the
specification and the applicable specification (slash) sheet.
PERIODIC QUALITY CONFORMANCE INSPECTION:
A periodic quality conformance inspection program consisting of environmental and reliability
testing is in place to ensure that product integrity is consistently maintained.
TUSONIX on-line www.tusonix.com
The TUSONIX Web site provides visitors with a wide range of product and ordering information.
At www.tusonix.com, customers can view product information and download catalogs in Adobe
Acrobat® .pdf format. Customers can also view or link to Sales Offices, International Agents and
Distributors. An on-line request form allows customers to immediately specify product require-
ments and request product information.
26
LOT ACCEPTANCE INSPECTION:
INSPECTION OR TEST TEST METHOD PER MIL-STD-202
EXCEPT AS NOTED POST TEST REQUIREMENTS
Visual and Mechanical
Materials, Design, Construction
and Workmanship
Physical Dimensions & Marking
Seal (4601 Style Only)
Capacitance
Dissipation Factor (1/Q)
Dielectric Withstanding Voltage
Insulation Resistance
Insertion Loss
DC Resistance (4601 Style Only)
Solderability (5pcs)
In accordance with applicable
requirements
Method 301, 2 seconds, 50 mA max. surge
current, 2 times WVDC.
Method 112, condition A
Method 305, 1KHz, 1±0.2 VRMS max. +25°C
Method 306, 1KHz, 1±0.2 VRMS max. +25°C
Method 302, 50 mA max. charging current,
100VDC, 2 minutes or as specified by
individual variation
MIL-STD-220, 50 Ohms, +25°C, no load
MIL-PRF-15733
Method 208
No leaks
Within specified tolerance
4.0% max
Greater than 10,000 Megohms
or 100 Ohm-Farads, whichever
is less.
Per application requirements.
0.01 Ohms max.
Per applicable requirements.
No evidence of damage or
break down.
