ALUMINUM ELECTROLYTIC CAPACITORS AK Snap-in Terminal Type, 105C Permissible Abnormal Voltage series Withstanding 2000 hours application of rated ripple current at 105C. Extended voltage range at 200V, 400V and 420V. Improved safety features for abnormally excessive voltage. Ideally suited for the equipment used at voltage fluctuating area. Compliant the RoHS directive (2002/95/EC). AK Smaller AQ Specifications Performance Characteristics Item Category Temperature Range - 25 to +105C Rated Voltage Range 200 Rated Capacitance Range 33 to 1200F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current I Tangent of loss angle (tan ) 0.20MAX. 120Hz 20C 400 420V 3 CV (A) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (F) V : Voltage (V)] Rated voltage(V) Impedance ratio (MAX) Z - 25C/Z+20C Stability at Low Temperature 200 8 400 420 Measurement frequency : 120Hz 8 Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after D.C. bias plus rated ripple current is applied for 2000 hours at 105C, the peak voltage shall not exceed the rated voltage. Capacitance change tan Leakage current Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the requirements listed at right. Capacitance change tan Leakage current Within 15% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value Safety Performance The pressure relief vent will operate in normal conditions, with no dangerous conditions such as flames, ignitions or dispersion of pieces of the capacitor and/or case. rating test conditions Capacitance (F) Limited DC current Test voltage Voltage (V) 330 C < 330 4A 200 300VDC and 375VDC 330 C < 470 5A 470 C < 470 7A 330 C < 100 2A 400 500VDC and 600VDC 100 C < 220 4A 220 C < 470 7A 330 C < 100 2A 420 520VDC and 630VDC 100 C < 220 4A 220 C < 470 7A Marking Printed with white color letter on black sleeve Drawing Type numbering system (Example : 200V 680F) Bottom plate (code ZB only) Polarity bar Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 D +1MAX. L A K 2 D 6 8 1 ME L A 5 0 Bottom Plate Case length code Case dia. code 10 L2 Configuration Capacitance tolerance (20%) 4.00.5 Pressure relief vent Rated capacitance (680F) 0.8 +0.2 -0.1 0.8 10 Rated voltage (200V) Code Z A B C With Bottom Plate Without code less Bottom Plate Series name Type 2.5 4.00.5 0.1 .2 +0 .1 -0 D 22 25 30 35 ZB Please contact to us if other configurations are required. 2-20.1 (PC board hole dimensions) 1.5 +0.2 -0.1 (Terminal dimensions) Minimum order quantity : 50pcs. Dimension table in next page. CAT.8100Y ALUMINUM ELECTROLYTIC CAPACITORS AK series Dimensions V(Code) Cap.(F) D Code 33 330 39 390 47 470 56 560 68 680 82 820 100 101 120 121 150 151 180 181 220 221 270 271 330 331 390 391 470 471 560 561 680 681 820 821 1000 102 1200 122 22 25 200V (2D) 30 35 22 x 20 0.35 22 x 20 0.50 25 x 20 0.65 22 x 25 0.70 22 x 25 0.74 22 x 30 0.90 22 x 30 1.05 22 x 35 1.20 22 x 40 1.30 22 x 45 1.50 30 x 20 0.70 25 x 25 0.85 25 x 30 1.05 25 x 30 1.20 25 x 35 1.30 25 x 40 1.50 25 x 50 1.70 35 x 20 1.10 30 x 25 1.05 30 x 25 1.20 30 x 25 1.35 30 x 35 1.55 30 x 40 1.70 30 x 45 1.99 30 x 50 2.10 35 x 25 1.55 35 x 30 1.70 35 x 35 1.99 35 x 40 2.10 35 x 50 2.30 22 22 x 20 0.22 22 x 20 0.30 22 x 25 0.35 22 x 25 0.38 22 x 25 0.40 22 x 30 0.50 22 x 35 0.55 22 x 40 0.60 22 x 45 0.70 22 x 50 0.80 25 25 x 20 0.35 25 x 20 0.38 25 x 25 0.45 25 x 25 0.50 25 x 30 0.53 25 x 30 0.60 25 x 35 0.70 25 x 40 0.80 25 x 45 0.90 400V (2G) 30 35 30 x 20 0.40 30 x 20 0.50 30 x 20 0.50 30 x 25 0.53 30 x 25 0.60 30 x 30 0.70 30 x 30 0.80 30 x 35 0.90 30 x 40 0.98 30 x 50 1.21 35 x 20 0.55 35 x 25 0.70 35 x 25 0.80 35 x 30 0.90 35 x 35 0.96 35 x 40 1.21 35 x 45 1.32 35 x 50 1.45 22 22 x 25 0.25 22 x 25 0.35 22 x 25 0.38 22 x 30 0.45 22 x 35 0.64 22 x 40 0.69 22 x 45 0.75 25 25 x 25 0.45 25 x 30 0.64 25 x 30 0.69 25 x 35 0.75 25 x 40 0.82 25 x 45 0.90 420V (W6) 30 30 x 25 0.69 30 x 30 0.75 30 x 30 0.82 30 x 35 0.90 30 x 40 1.00 30 x 45 1.10 35 35 x 25 0.75 35 x 25 0.82 35 x 30 0.90 35 x 35 1.00 35 x 40 1.10 35 x 45 1.20 Case size D xRated L (mm) ripple Rated ripple Rated ripple current (Arms) at 105C 120Hz Frequency coefficient of rated ripple current Frequency (Hz) 200V Coefficient 400 * 420V 50 0.85 0.88 60 0.88 0.90 120 1.00 1.00 1k 1.15 1.10 10k or more 1.20 1.15 CAT.8100Y