leaded resISTORS Precision Type Metal Film Resistors Normal & Miniature Style [ MFP Series ] FEATURES Power Rating 1/6W, 1/4W, 0.4W, 1/2W, 0.6W, 1W, 2W, 3W Resistance Tolerance 0.1%, 0.25%, (0.02%, 0.05% on request) T.C.R. 15ppm/C, 25ppm/C, (5ppm/C, 10ppm/C on request) DERATING CURVE For resistors operated in ambient temperatures above 70C, power rating must be derated in accordance with the curve below. INTRODUCTION The MFP Series Metal Film Precision Resistors are manufactured using a vacuum sputtering system to deposit multiple layers of mixed metal alloys and passivative materials onto a carefully treated high grade ceramic substrate. After a helical groove has been cut in the resistive layer, tinned connecting leads of electrolytic copper are welded to the end-caps. The resistors are coated with layers of blue color lacquer. Ultra high precision resistors, ultra high stability, ultra low temperature coefficient. 70 Rated Load (%) 155 C 100 80 60 40 20 20 40 60 80 Ambient Temperature (C) 100 120 140 160 DIMENSIONS Unit: mm STYLE od H L oD DIMENSION Normal Miniature L oD H od MFP-12 MFP25S 3.40.3 1.90.2 282.0 0.450.05 MFP204 - 3.40.3 1.90.2 282.0 0.450.05 MFP-25 MFP50S 6.30.5 2.40.2 282.0 0.550.05 MFP207 - 6.30.5 2.40.2 282.0 0.550.05 MFP-50 MFP1WS 9.00.5 3.30.3 262.0 0.550.05 MFP100 MFP2WS 11.51.0 4.50.5 352.0 0.80.05 MFP200 MFP3WS 15.51.0 5.00.5 332.0 0.80.05 7 Note: ELECTRICAL CHARACTERISTICS STYLE MFP-12 MFP25S MFP204 MFP-25 MFP50S MFP207 MFP-50 MFP1WS MFP100 MFP2WS MFP200 MFP3WS Power Rating at 70C 1/6W 1/4W Maximum Working Voltage 150V 200V 250V Maximum Overload Voltage 300V 400V 500V Voltage Proof 300V Resistance Range 10 - 1 M for E192 series value Operating Temp. Range -55C to +155C Temperature Coefficient 15ppm/C, 25ppm/C 0.4W 1/4W 1/2W 0.6W 600V 1/2W 1W 350V 400V 500V 700V 800V 1,000V 700V 1,000V 500V 2W 3W Note: Special value is available on request ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD Short Time Overload IEC 60115-1 4.13 2.5 times RCWV for 5 Sec. 0.25%+0.05 Voltage Proof IEC 60115-1 4.7 in V-block for 60 Sec., test voltage by type By type Temperature Coefficient IEC 60115-1 4.8 -55C to +155C By type Insulation Resistance IEC 60115-1 4.6 in V-block for 60 Sec. >10,000M Solderability IEC 60115-1 4.17 2355C for 30.5 Sec. 95% Min. coverage Solvent Resistance of Marking IEC 60115-1 4.30 IPA for 50.5 Min. with ultrasonic No deterioration of coatings and markings Robustness of Terminations IEC 60115-1 4.16 Direct load for 10 Sec. in the direction of the terminal leads 2.5kg (24.5N) Periodic-pulse Overload IEC 60115-1 4.39 4 times RCWV 10,000 cycles (1 Sec. on, 25 Sec. off) 1.0%+0.05 Damp Heat Steady State IEC 60115-1 4.24 402C, 90-95% RH for 56 days, loaded with 0.1 times RCWV 1.5%+0.05 Endurance at 70C IEC 60115-1 4.25 702C at RCWV for 1,000 Hr. (1.5 Hr. on, 0.5 Hr. off) 1.5%+0.05 Temperature Cycling IEC 60115-1 4.19 -55C Room Temp. +155C Room Temp. (5 cycles) 0.75%+0.05 Resistance to Soldering Heat IEC 60115-1 4.18 2603C for 101 Sec., immersed to a point 30.5mm from the body 0.25%+0.05 Note: Rated Continuous Working Voltage (RCWV) = APPRAISE Power Rating x Resistance Value