OBSOLETE/EOL DATE June/30/2018 PCN/ECN# LFPCN41246 REPLACED BY SMBJ Series 1SMB5.0AT3G Series, SZ1SMB5.0AT3G Series 600 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional The SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. The SMB series is supplied in the Littelfuse exclusive, cost-effective, highly reliable package and is ideally suited for use in communication systems, automotive, numerical controls, process controls, medical equipment, business machines, power supplies and many other industrial/consumer applications. Littelfuse.com PLASTIC SURFACE MOUNT ZENER OVERVOLTAGE TRANSIENT SUPPRESSORS 5.0 V - 170 V, 600 W PEAK POWER SMB CASE 403A PLASTIC Features Working Peak Reverse Voltage Range - 5.0 V to 170 V Standard Zener Breakdown Voltage Range - 6.7 V to 199 V Peak Power - 600 W @ 1.0 ms ESD Rating of Class 3 (> 16 kV) per Human Body Model Maximum Clamp Voltage @ Peak Pulse Current Low Leakage < 5.0 mA Above 10 V UL 497B for Isolated Loop Circuit Protection Response Time is Typically < 1.0 ns SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable Pb-Free Packages are Available Mechanical Characteristics CASE: Void-free, transfer-molded, thermosetting plastic FINISH: All external surfaces are corrosion resistant and leads are readily solderable MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 260C for 10 Seconds LEADS: Modified L-Bend providing more contact area to bond pads POLARITY: Cathode indicated by polarity band MOUNTING POSITION: Any Cathode Anode MARKING DIAGRAM AYWW xx G G A Y WW xx G = Assembly Location = Year = Work Week = Device Code (Refer to page 3) = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Device Package Shipping 1SMBxxxAT3G SMB (Pb-Free) 2,500 / Tape & Reel SZ1SMBxxxAT3G SMB (Pb-Free) 2,500 / Tape & Reel DEVICE MARKING INFORMATION See specific marking information in the device marking column of the Electrical Characteristics table on page 3 of this data sheet. Specifications subject to change without notice. (c) 2016 Littelfuse, Inc. September 19, 2016 - Rev. 13 1 Publication Order Number: 1SMB5.0AT3/D 1SMB5.0AT3G Series, SZ1SMB5.0AT3G Series MAXIMUM RATINGS Rating Symbol Value Unit Peak Power Dissipation (Note 1) @ TL = 25C, Pulse Width = 1 ms PPK 600 W DC Power Dissipation @ TL = 75C Measured Zero Lead Length (Note 2) Derate Above 75C Thermal Resistance from Junction-to-Lead PD 3.0 40 25 W mW/C C/W W mW/C C/W RqJL DC Power Dissipation (Note 3) @ TA = 25C Derate Above 25C Thermal Resistance from Junction-to-Ambient PD RqJA 0.55 4.4 226 Forward Surge Current (Note 4) @ TA = 25C IFSM 100 A TJ, Tstg -65 to +150 C Operating and Storage Temperature Range Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. 10 X 1000 ms, non-repetitive. 2. 1 in square copper pad, FR-4 board. 3. FR-4 board, using minimum recommended footprint, as shown in 403A case outline dimensions spec. 4. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, VF = 3.5 V Max. @ IF (Note 5) = 30 A) Symbol Parameter IPP Maximum Reverse Peak Pulse Current VC Clamping Voltage @ IPP VRWM IR VBR I IF VC VBR VRWM Working Peak Reverse Voltage Maximum Reverse Leakage Current @ VRWM IR VF IT V Breakdown Voltage @ IT IT Test Current IF Forward Current VF Forward Voltage @ IF IPP Uni-Directional TVS 5. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, non-repetitive duty cycle. Specifications subject to change without notice. (c) 2016 Littelfuse, Inc. September 19, 2016 - Rev. 13 2 Publication Order Number: 1SMB5.0AT3/D 1SMB5.0AT3G Series, SZ1SMB5.0AT3G Series ELECTRICAL CHARACTERISTICS Device* Device Marking VC @ IPP (Note 8) Breakdown Voltage VRWM (Note 6) IR @ VRWM V mA Min Nom @ IT VC IPP Ctyp (Note 9) Max mA V A pF VBR (Note 7) Volts 1SMB5.0AT3G 1SMB6.0AT3G 1SMB6.5AT3G 1SMB7.0AT3G KE KG KK KM 5.0 6.0 6.5 7.0 800 800 500 500 6.40 6.67 7.22 7.78 6.7 7.02 7.6 8.19 7.0 7.37 7.98 8.6 10 10 10 10 9.2 10.3 11.2 12.0 65.2 58.3 53.6 50.0 2700 2300 2140 2005 1SMB7.5AT3G 1SMB8.0AT3G 1SMB8.5AT3G 1SMB9.0AT3G KP KR KT KV 7.5 8.0 8.5 9.0 100 50 10 5.0 8.33 8.89 9.44 10.0 8.77 9.36 9.92 10.55 9.21 9.83 10.4 11.1 1.0 1.0 1.0 1.0 12.9 13.6 14.4 15.4 46.5 44.1 41.7 39.0 1890 1780 1690 1605 1SMB10AT3G 1SMB11AT3G 1SMB12AT3G 1SMB13AT3G KX KZ LE LG 10 11 12 13 5.0 5.0 5.0 5.0 11.1 12.2 13.3 14.4 11.7 12.85 14 15.15 12.3 13.5 14.7 15.9 1.0 1.0 1.0 1.0 17.0 18.2 19.9 21.5 35.3 33.0 30.2 27.9 1460 1345 1245 1160 1SMB14AT3G 1SMB15AT3G 1SMB16AT3G 1SMB17AT3G LK LM LP LR 14 15 16 17 5.0 5.0 5.0 5.0 15.6 16.7 17.8 18.9 16.4 17.6 18.75 19.9 17.2 18.5 19.7 20.9 1.0 1.0 1.0 1.0 23.2 24.4 26.0 27.6 25.8 24.0 23.1 21.7 1085 1020 965 915 1SMB18AT3G 1SMB20AT3G 1SMB22AT3G 1SMB24AT3G LT LV LX LZ 18 20 22 24 5.0 5.0 5.0 5.0 20.0 22.2 24.4 26.7 21.05 23.35 25.65 28.1 22.1 24.5 26.9 29.5 1.0 1.0 1.0 1.0 29.2 32.4 35.5 38.9 20.5 18.5 16.9 15.4 870 790 730 675 1SMB26AT3G 1SMB28AT3G 1SMB30AT3G 1SMB33AT3G ME MG MK MM 26 28 30 33 5.0 5.0 5.0 5.0 28.9 31.1 33.3 36.7 30.4 32.75 35.05 38.65 31.9 34.4 36.8 40.6 1.0 1.0 1.0 1.0 42.1 45.4 48.4 53.3 14.2 13.2 12.4 11.3 630 590 555 510 1SMB36AT3G 1SMB40AT3G 1SMB43AT3G 1SMB45AT3G MP MR MT MV 36 40 43 45 5.0 5.0 5.0 5.0 40.0 44.4 47.8 50.0 42.1 46.75 50.3 52.65 44.2 49.1 52.8 55.3 1.0 1.0 1.0 1.0 58.1 64.5 69.4 72.7 10.3 9.3 8.6 8.3 470 430 400 385 1SMB48AT3G 1SMB51AT3G 1SMB54AT3G 1SMB58AT3G MX MZ NE NG 48 51 54 58 5.0 5.0 5.0 5.0 53.3 56.7 60.0 64.4 56.1 59.7 63.15 67.8 58.9 62.7 66.3 71.2 1.0 1.0 1.0 1.0 77.4 82.4 87.1 93.6 7.7 7.3 6.9 6.4 365 345 330 310 1SMB60AT3G 1SMB64AT3G 1SMB70AT3G 1SMB75AT3G NK NM NP NR 60 64 70 75 5.0 5.0 5.0 5.0 66.7 71.1 77.8 83.3 70.2 74.85 81.9 87.7 73.7 78.6 86 92.1 1.0 1.0 1.0 1.0 96.8 103 113 121 6.2 5.8 5.3 4.9 300 280 260 245 1SMB85AT3G 1SMB90AT3G 1SMB100AT3G NV NX NZ 85 90 100 55.0 5.0 5.0 94.4 100 111 99.2 105.5 117 104 111 123 1.0 1.0 1.0 137 146 162 4.4 4.1 3.7 220 210 190 1SMB110AT3G 1SMB120AT3G 1SMB130AT3G 1SMB150AT3G PE PG PK PM 110 120 130 150 5.0 5.0 5.0 5.0 122 133 144 167 128.5 140 151.5 176 135 147 159 185 1.0 1.0 1.0 1.0 177 193 209 243 3.4 3.1 2.9 2.5 175 160 150 135 1SMB160AT3G 1SMB170AT3G PP PR 160 170 5.0 5.0 178 189 187.5 199 197 209 1.0 1.0 259 275 2.3 2.2 125 120 6. A transient suppressor is normally selected according to the working peak reverse voltage (VRWM), which should be equal to or greater than the DC or continuous peak operating voltage level. 7. VBR measured at pulse test current IT at an ambient temperature of 25C. 8. Surge current waveform per Figure 2 and derate per Figure 4 of the General Data - 600 W at the beginning of this group. 9. Bias Voltage = 0 V, F = 1 MHz, TJ = 25C Please see 1SMB10CAT3 to 1SMB78CAT3 for Bidirectional devices. * Include SZ-prefix devices where applicable. Specifications subject to change without notice. (c) 2016 Littelfuse, Inc. September 19, 2016 - Rev. 13 3 Publication Order Number: 1SMB5.0AT3/D 1SMB5.0AT3G Series, SZ1SMB5.0AT3G Series NONREPETITIVE PULSE WAVEFORM SHOWN IN FIGURE 2 PULSE WIDTH (tP) IS DEFINED AS THAT POINT WHERE THE PEAK CURRENT DECAYS TO 50% OF IPP. tr 10 ms 100 10 PEAK VALUE - IPP VALUE (%) PPK, PEAK POWER (kW) 100 I HALF VALUE - PP 2 50 1 tP 0.1 0.1 ms 1 ms 10 ms 100 ms 1 ms 0 10 ms 0 1 2 tP, PULSE WIDTH 4 5 t, TIME (ms) Figure 1. Pulse Rating Curve Figure 2. Pulse Waveform 10,000 160 TJ = 25C f = 1 MHz 140 1SMB5.0AT3G 1000 120 C, CAPACITANCE (pF) PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT @ TA = 25 C 3 100 80 60 40 20 0 0 25 50 75 100 125 150 1SMB10AT3G 100 1SMB48AT3G 1SMB170AT3G 10 1 1 10 TA, AMBIENT TEMPERATURE (C) 100 1000 BIAS VOLTAGE (VOLTS) Figure 4. Typical Junction Capacitance vs. Bias Voltage Figure 3. Pulse Derating Curve Zin LOAD Vin VL Figure 5. Typical Protection Circuit Specifications subject to change without notice. (c) 2016 Littelfuse, Inc. September 19, 2016 - Rev. 13 4 Publication Order Number: 1SMB5.0AT3/D 1SMB5.0AT3G Series, SZ1SMB5.0AT3G Series APPLICATION NOTES Response Time minimum lead lengths and placing the suppressor device as close as possible to the equipment or components to be protected will minimize this overshoot. Some input impedance represented by Zin is essential to prevent overstress of the protection device. This impedance should be as high as possible, without restricting the circuit operation. In most applications, the transient suppressor device is placed in parallel with the equipment or component to be protected. In this situation, there is a time delay associated with the capacitance of the device and an overshoot condition associated with the inductance of the device and the inductance of the connection method. The capacitive effect is of minor importance in the parallel protection scheme because it only produces a time delay in the transition from the operating voltage to the clamp voltage as shown in Figure 6. The inductive effects in the device are due to actual turn-on time (time required for the device to go from zero current to full current) and lead inductance. This inductive effect produces an overshoot in the voltage across the equipment or component being protected as shown in Figure 7. Minimizing this overshoot is very important in the application, since the main purpose for adding a transient suppressor is to clamp voltage spikes. The SMB series have a very good response time, typically < 1.0 ns and negligible inductance. However, external inductive effects could produce unacceptable overshoot. Proper circuit layout, V Duty Cycle Derating The data of Figure 1 applies for non-repetitive conditions and at a lead temperature of 25C. If the duty cycle increases, the peak power must be reduced as indicated by the curves of Figure 8. Average power must be derated as the lead or ambient temperature rises above 25C. The average power derating curve normally given on data sheets may be normalized and used for this purpose. At first glance the derating curves of Figure 8 appear to be in error as the 10 ms pulse has a higher derating factor than the 10 ms pulse. However, when the derating factor for a given pulse of Figure 8 is multiplied by the peak power value of Figure 1 for the same pulse, the results follow the expected trend. V Vin (TRANSIENT) OVERSHOOT DUE TO INDUCTIVE EFFECTS Vin (TRANSIENT) VL VL Vin td tD = TIME DELAY DUE TO CAPACITIVE EFFECT t t Figure 6. Figure 7. 1 0.7 DERATING FACTOR 0.5 0.3 0.2 PULSE WIDTH 10 ms 0.1 0.07 0.05 1 ms 0.03 100 ms 0.02 0.01 10 ms 0.1 0.2 0.5 1 2 5 10 D, DUTY CYCLE (%) 20 50 100 Figure 8. Typical Derating Factor for Duty Cycle Specifications subject to change without notice. (c) 2016 Littelfuse, Inc. September 19, 2016 - Rev. 13 5 Publication Order Number: 1SMB5.0AT3/D 1SMB5.0AT3G Series, SZ1SMB5.0AT3G Series UL RECOGNITION including Strike Voltage Breakdown test, Endurance Conditioning, Temperature test, Dielectric Voltage-Withstand test, Discharge test and several more. Whereas, some competitors have only passed a flammability test for the package material, we have been recognized for much more to be included in their Protector category. The entire series has Underwriters Laboratory Recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and File #E128662 . Many competitors only have one or two devices recognized or have recognition in a non-protective category. Some competitors have no recognition at all. With the UL497B recognition, our parts successfully passed several tests Specifications subject to change without notice. (c) 2016 Littelfuse, Inc. September 19, 2016 - Rev. 13 6 Publication Order Number: 1SMB5.0AT3/D 1SMB5.0AT3G Series, SZ1SMB5.0AT3G Series PACKAGE DIMENSIONS SMB CASE 403A-03 ISSUE H HE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P. E b DIM A A1 b c D E HE L L1 D POLARITY INDICATOR OPTIONAL AS NEEDED MIN 1.90 0.05 1.96 0.15 3.30 4.06 5.21 0.76 MILLIMETERS NOM MAX 2.20 2.28 0.10 0.19 2.03 2.20 0.23 0.31 3.56 3.95 4.32 4.60 5.44 5.60 1.02 1.60 0.51 REF MIN 0.075 0.002 0.077 0.006 0.130 0.160 0.205 0.030 INCHES NOM 0.087 0.004 0.080 0.009 0.140 0.170 0.214 0.040 0.020 REF MAX 0.090 0.007 0.087 0.012 0.156 0.181 0.220 0.063 A L L1 c A1 SOLDERING FOOTPRINT 2.261 0.089 2.743 0.108 2.159 0.085 SCALE 8:1 mm inches Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. Littelfuse.com Specifications subject to change without notice. (c) 2016 Littelfuse, Inc. September 19, 2016 - Rev. 13 7 Publication Order Number: 1SMB5.0AT3/D