GBA.2S.250.FN - LEMO - Datasheet.Directory

UNIPOLE & MULTIPOLE

CONNECTORS

No reproduction or use without express permission of editorial or pictorial content, in any manner. Printed in Switzerland, 2010 © LEMO SA

LEMO reserve the right at all times to modify and improve specifications without any notification. Pdf updated, June 2016

1www.lemo.com
®®
LEMO unipole and multipole connectors
Table of Contents
This catalogue gives the complete description of LEMO unipole and multipole type connectors. The LEMO manufacturing 
programme has been extended to almost 40 series divided into 7 product families with specific mating and environmental
characteristics. Each series includes a wide variety of plug, socket, coupler and bridge plug models, available in contact
configurations adapted to all round cables, including up to 106 conductors, and a maximum diameter of 30 mm. 
Watertight and vacuumtight models are also available. Since LEMO connectors are perfectly screened and designed to
guarantee very low resistance to shell electrical continuity, they are particularly adapted to applications where electro-
magnetic compatibility (EMC) is important.
3 steps to select the right connector ................................................................................................................................................................................3
B Series (indoor, keyed)
Part Numbering system .........................................................................................................................................................................................11
Metal Housing models............................................................................................................................................................................................12
Elbow socket models..............................................................................................................................................................................................22
Plastic housing models...........................................................................................................................................................................................24
Watertight and vacuumtight models .......................................................................................................................................................................26
Bridge models ........................................................................................................................................................................................................29
Threaded-latching models......................................................................................................................................................................................30
Alignment Key and Polarized Keying System ........................................................................................................................................................31
K Series (outdoor, keyed)
Part Numbering system..........................................................................................................................................................................................33
Metal Housing models............................................................................................................................................................................................34
Watertight and vacuumtight models .......................................................................................................................................................................41
Alignment Key and Polarized Keying System ........................................................................................................................................................43
B and K Series
Insert configuration, Housings, Insulators, Contacts .................................................................................................................................45
S Series (indoor, stepped insert)
Part Numbering system .........................................................................................................................................................................................57
Metal Housing models............................................................................................................................................................................................58
Elbow socket models..............................................................................................................................................................................................68
Plastic housing models...........................................................................................................................................................................................70
E Series (outdoor, stepped insert)
Part Numbering system..........................................................................................................................................................................................75
Metal Housing models............................................................................................................................................................................................76
Watertight and vacuumtight models .......................................................................................................................................................................82
L Series (outdoor, stepped insert)
Part Numbering system..........................................................................................................................................................................................85
Metal Housing models............................................................................................................................................................................................86
Vacuumtight models...............................................................................................................................................................................................89
Alignment Key and Polarized Keying System ........................................................................................................................................................90
S, E and L Series
Insert configuration, Housings, Insulators, Contacts .................................................................................................................................91
2G Series (indoor, keyed)...............................................................................................................................................................................................110
2C Series (indoor, stepped insert).................................................................................................................................................................................116
1D Series (indoor, 4 concentric contacts) ....................................................................................................................................................................124
Spare parts ......................................................................................................................................................................................................................130
Accessories .....................................................................................................................................................................................................................136
Tooling .............................................................................................................................................................................................................................146
Panel cut-outs .................................................................................................................................................................................................................152
PCB drilling pattern ........................................................................................................................................................................................................154
Cable assembly (B, K, S and E series) ...........................................................................................................................................................................161
Technical characteristics ...............................................................................................................................................................................................171

www.lemo.com

Precision modular connectors to suit your application

Since it’s creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull

connectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in

more than 80 countries with the help of over 40 subsidiaries and distributors.

Over 75’000 connectors

The modular design of the LEMO range provides over 75’000 connectors from miniature ø 3 mm to ø 50 mm, capable of

handling cable diameters up to 30 mm and for up to 106 contacts.

This vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in most

markets, including medical devices, test and measurement instruments, machinery, audio video broadcast, telecommuni-

cations and military.

LEMO’s Push-Pull Self-Latching Connection System

The LEMO self-latching system allows the connector

to be mated by simply pushing the plug axially into the

socket.

This self-latching system is renowned worldwide for its easy and quick mating and unmating features. It provides absolute

security against vibration, shock or pull on the cable, and facilitates operation in a very limited space.

UL Recognition

LEMO connectors are recognized by the Underwriters Laboratories (UL). The approval of the complete system (LEMO

connector, cable and your equipment) will be easier because LEMO connectors are recognized.

CE marking

CE marking means that the appliance or equipment bearing it complies with the protection requirements of one or

several European safety directives. CE marking applies to complete products or equipment, but not to electrome-

chanical components, such as connectors.

RoHS

LEMO connector specifications conforms the requirements of the RoHS directive (2011/65/EU) of the European Parlia-

ment and the latest amendments. This directive specifies the restrictions of the use of hazardous substances in electrical

and electronic equipment marketed in Europe.

Once firmly latched, connection cannot be broken by

pulling on the cable or any other component part other

than the outer release sleeve.

When required, the connector is disengaged by a

single axial pull on the outer release sleeve. This first

disengages the latches and then withdraws the plug

from the socket.

.. .

3www.lemo.com

®®

●Step 1: Select connector series

Select the appropriate LEMO connector series according to the environmental parameters that will affect your device

or cable such as indoor, outdoor, temperature range, ingress protection of the mated connector and of your device.

Use the table shown on page 4.

Part number coding

B, K, S, E, L, G, C or D

●Step 2: Select connector size

Use the section (mm2) or the AWG of your cable wire to select the optimal contact diameter (values vary between

solder, crimp or print contact), see page 7.

Use this optimal contact diameter to determine the right connector size as well as the insert configuration, see page 6.

0, 1, 2, 3, 4, 5 or 6

●Step 3: Complete the part number

Now that you know the series, as well as the insulator configuration, complete the part numbering system with the help

of the following table.

Model Series Contact Collet Variant

Housing

material

Insert

configuration Insulator

material

12 12 45 50 50 50 52 54

34 34 45 50 50 50 53 54

58 58 91 99 99 99 102 107

76 76 91 99 99 99 105 107

86 86 92 99 99 99 106 107

111 111 112 112 110 113 113 113

117 117 120 120 116 120 121 121

125 125 127 127 124 127 127 128

B Series (indoor, keyed)

K Series (outdoor, keyed)

S Series (indoor, stepped insert)

E Series (outdoor, stepped insert)

L Series (outdoor, keyed, stepped insert)

G Series (indoor, keyed)

C Series (indoor, stepped insert)

D Series (indoor, 4 concentric contacts)

3 steps to select the right connector

Note: Figures in the above table refer to the catalogue pages.

Part number coding

®®

www.lemo.com

Series

Environment

Ingress 1)

protection

Ingress 2)

protection

Temperature

range

Latching

Shell sizes

Insulator type

Contact type

Features

Page

00 multipole

BK00 unipole

SE C D

Solder, crimp or print Solder, crimp

or print

Solder, crimp or print Solder

Push-Pull self-latching

7 metal

and 4 plastic 6 metal 7 metal

and 5 plastic 6 metal 4 metal 1 metal

Multipole Multipole

9 to 31 32 to 44 55 to 73 74 to 83 116 to 122

Solder or print

3 metal

109 to 115 123 to 12884 to 90

Multipole

hermaphroditic Quadrax

Unipole or multipole

hermaphroditic

indoor indoor outdoor or harsh environment

IP50 IP66 to IP68 IP50 IP66 to IP68

- 55 to 250°C - 55 to 200°C - 55 to 250°C - 55 to 200°C - 40 to 120°C

indoor

IP50

IP50 to IP68

vacuumtight IP66 to IP68

vacuumtight IP50 to IP68

vacuumtight IP66 to IP68

vacuumtight IP50 IP50

IP50 to IP68

vacuumtight

- 55 to 250°C

13 keyways 9 keyways Stepped insert Stepped

insert 4 concentric

contacts

Stepped

insert 1 keyway

Multipole

hermaphroditic

LEMO unipole and multipole connectors

The standard keyed Series (B, 00, G)

The characteristic feature of these connector series is a keying system which allows higher contact density and prevents

all errors in alignment. The various keying alternatives prevent unwanted cross mating of otherwise similar connectors. It

is also possible to use crimp contacts to reduce cable assembly time. These connector series, include the 0B to 5B range

as well as the 00 multipole and 2G (shortened version of the 2B series), some vacuumtight models are also available.

The watertight keyed Series (K, L)

These series are watertight when mated and assembled to an appropriate cable. They include the 0K to 5K series, avail-

able in the same types as the 0B to 5B series, and the 0L to 2L series with keying and hermaphroditic insulator.

The standard Series (S, 00, C, D)

The characteristic feature of these connector series is the hermaphroditic insulator in the multipole version. They include

principally the 0S to 6S series, as well as the 00 unipole series, the 2C (shortened version) and the 1D quadrax type

(with 4 concentric contacts).

The watertight Series (E)

These series are watertight when mated and assembled to an appropriate cable. They include the 0E to 6E series and

are available in the same types as the S series.

outdoor or

harsh env.

Note:

1) Mated connector. See ingress protection code page 5.

2) Your device. For selection of connectors for watertight and vacuumtight devices, see page 5.

Step 1: Select Connector Series

5www.lemo.com

®®

Selection of connectors for watertight or vacuumtight devices

LEMO B and S series are rated IP50 only when mated. LEMO E, K and L series are rated IP66 (and over) only when

mated. If a device must be watertight or vacuumtight when the connectors are unmated, it is important to select a watertight

or vacuumtight socket. You can consider the following two situations:

Fig. 1 Fig. 2

FGG plug K series

EGG socket K series

FGG plug B series

HGG socket B series

epoxy

resin seal

your device

Definition of Ingress Protection (IP code)

IEC 60529 outlines an international classification system

for the sealing effectiveness of enclosures of electrical

equipment against the intrusion into the equipment of for-

eign bodies (i.e. tools, dust, fingers) and moisture. This

classification system utilizes the letters «IP» (Ingress Pro-

tection) followed by two digits.

Example: IP 50 = IP 50

IP letter code

1st digit

2nd digit

Degrees of protection - First digit

The first digit of the IP code indicates the degree to which

persons are protected against contact with moving parts

and the degree that equipment is protected against solid

foreign bodies intruding into an enclosure.

Degrees of protection - Second digit

The second digit indicates the degree of protection of the

equipment inside the enclosure against the harmful entry

of various forms of moisture (e.g. dripping, spraying, sub-

mersion, etc.)

First digit description

Code

No special protection

Protection from a large part of the body such as hand

or from solid objects greater than 50 mm in diameter

Protection against objects not greater than 80 mm in length

and 12 mm in diameter

Protection from entry by tools, wires, etc.,

with a diameter or thickness greater than 2.5 mm

Protection from entry by solid objects

with a diameter or thickness greater than 1.0 mm

Protection from the amount of dust that would interfere

with the operation of the equipment

Dust-tight

–

Second digit description

Code

No special protection

Protection from vertically dripping water

Protection from dripping water when tilted up to 15°

Protection from sprayed water

Protection from splashed water

Protection from water projected from a nozzle

Protection against heavy seas, or powerful jets of water

Protection against temporary immersion

Protection against complete continuous submersion in water

your device

A) Figure 1 shows a typical outdoor device. To ensure this

device retains IP66 or above when connectors are

unmated, it is important to choose a watertight socket

from B, S, E, K or L series.

B) Figure 2 shows a device which is subjected to pressure

difference such as a near vacuum or pressurized gas

and must exhibit no leakage. To ensure the device

maintains its sealing, the socket is additionally tested for

helium leakage (according MIL 1344A).

Check temperature range (see section on pages 26, 41, 72, 82 and 89).

0.5 0.9 1.3 2.0 3.0 6.0 0.9 1.3 1.6 2.0 4.0 6.0 1.6

0.5 0.9 1.3 1.6 2.0 0.7 0.9 1.3 2.0 3.0 6.0/4.0 6.0 1.3

0.5 0.7 0.9 1.3 2.0 3.0 4.0 0.7 0.9 1.3 2.0 3.0 4.0 8.0 1.3 0.6

0.35 0.7 0.9 1.3 1.6 0.9/0.7 1.3 2.0/1.3 3.0/2.0 4.0/3.0

0.5 0.7 1.3 1.6 2.0 0.7 1.3 1.3 2.0 3.0 1.3

0.5 0.7 1.3 1.6 2.0 1.3/0.9 1.3 2.0/1.3

0.7 0.9 1.3 0.9 1.3 1.3 3.0 0.7

0.5 1.3/2.0 1.3

0.5 0.9 1.3 1.6 3.0 0.9 1.3 1.3 2.0 0.7

0.35 0.7 0.9 1.3 0.9 1.3 2.0 4.0/5.0 0.7

0.9 1.3

0.5 0.7 0.9 2.0 0.9 1.3 3.0/2.0 0.7

0.5 0.7 0.9 0.9 2.0 0.9 0.9 2.0 3.0

0.7 0.9 0.9 0.9 3.0/1.6 4.0 0.7

0.7

0.7 0.9 1.6 0.9 1.6 3.0

0.7 0.9 3.0/1.6

0.7 0.9 0.9 1.6 3.0

0.5 0.7

0.7 0.9 1.3 1.3 2.0

0.5 2.0

1.3 2.0 2)

0.7 1.3 1.3 2.0

1.3

0.7 1.3 1.3 2.0

0.9

1.6

0.9 1.3

1.3

0.9

®®

www.lemo.com

Number of contacts

0B-0K

1B-1K

2B-2K

3B-3K

4B-4K

5B-5K

0S-0E-0L1)

1S-1E-1L1)

2S-2E-2L1)

3S-3E

4S-4E

5S-5E

6S-6E

1D (ø C)

1.3

1.6

2.0

3.0 3.0

4.0 4.0 4.0

6.0 6.0

12.0

Series

Insert configuration

113

116

120

130

140

160

112

302

303

304

305

306

307

308

309

310

312

313

314

316

318

319

320

322

324

326

330

332

336

340

344

348

350

354

360

362

364

372

106

Select the right connector size and insert configuration

To be able to select the right connector size (0 to 6), it is important to define the contact diameter (ø A).

Find out the available contact diameter (ø A) of the LEMO connector depending on the number of contacts required and

depending on the rating required (see pages 45 to 49 and 91 to 98).

The following table shows the contact diameter (ø A), or the solder pot diameter (ø C) for the 1D series.

Note: 1) L series not available in unipole version. 2) 2.0 is for 6S series, for 6E the values are 1.3 and 5.0.

Step 2: Select Connector Size

106

Unipole

Multipole

7www.lemo.com

Verify if the selected contact diameter (ø A) of the LEMO connector fits to your cable wire diameter (AWG number or

max. available section).

Conductor

Solid Stranded

AWG Section (mm2)

min. max. min. max.

Fr1)

(N)

AWG

max.

Section

max.

(mm2)

Contact

ø A ø C Form

(mm) (mm) per fig.

0.55) 0.45 1

0.80 1

0.7

0.45 2

1.10 1

0.9 0.80 2

0.45 2

1.40 1

1.3 1.10 2

0.80 2

1.90 1

1.6

1.40 2

2.40 1

2.0

1.90 2

3.0 3.20 1

4.0 4.00 1

Note

●

ø A

ø C

ø A

ø C

Contact type

– – 32 28 0.035 0.09 12

– – 26 224) 0.140 0.34

– – 32 28 0.035 0.09

– – 24 20 0.250 0.50

– – 26 224) 0.140 0.34 30

– – 32 28 0.035 0.09

– – 20 18 0.500 1.00

– – 24 20 0.250 0.50 40

– – 26 224) 0.140 0.34

– – 18 144) 1.000 1.50

– – 22 18 0.340 1.00

– – 16 124) 1.500 2.50

– – 18 14 1.000 1.50

– – 14 104) 2.500 4.00 75

– – 12 10 4.000 6.00 90

L dimensions and C are detailed in the section on PCB drilling pattern.

See page 156 and 159.

L dimensions and C are detailed in the section on PCB drilling pattern.

See page 157 and 160.

ø A

ø C

ø A ø C

ø C

ø A

ø C

ø A

Note: 1) contact retention force in the insulator (according to IEC 60512-8 test 15 a).

2) for 00 multipole series.

3) for S, E, 2C, 2G and 1D series.

4) for a given AWG, the diameter of some stranded conductor designs is larger than the solder cup diameter. Make sure that the maximum conductor

diameter is smaller than ø C.

5) for 00 multipole series or for 0B and 1B series with male contacts.

6) for 0B.302/0B.303 and 0K.302/0K.303 ø C = 1.0 mm, AWG max 20, section max (mm2) 0.50.

7) for 00 and 1B/1K series, according to manufacturing and plating tolerance ø C min = 0.43 mm.

fig. 1

fig. 2

Solder 28 0.09 – 30 – 0.05 –

28 0.09 – 30 – 0.05 –

28 0.09 – 28 – 0.09 –

24 0.25 – 26 – 0.14 –

22 0.34 – 224) – 0.34 –

226) 0.346) – 224)6) – 0.346) –

20 0.50 – 204) – 0.50 –

16 1.00 – 18 – 1.00 –

14 1.50 – 16 – 1.50 –

10 4.00 – 12 – 4.00 –

10 6.00 – 10 – 6.00 –

– – – 8 – 10.00 –

– – – 4 – 21.00 –

– – – 0 – 50.00 –

●

0.35 0.40 –

0.52) 0.402) –

0.5 0.457) –

0.73) 0.603) –

0.7 0.80 –

0.9 0.806) –

1.3 1.00 –

1.6 1.40 –

2.0 1.80 –

3.0 2.70 –

4.0 3.70 –

5.0 5.20 –

6.0 5.20 –

8.0 7.00 –

12.0 11.50 –

Verify the fitting to your wire

Crimp

Print (elbow)

1.1 4.1 1.1 4.1

1.3 6.7 1.3 6.1

1.3 8.5 1.3 8.0

1.3 10.5 1.3 10.0

2.5 13.0 2.5 13.0

4.1 22.0 4.1 13.0

6.1 30.0 – –

11.1 30.0 – –

1.0 5.0 1.0 5.0

1.3 8.53) 1.3 8.5

1.3 10.53) 1.3 10.5

2.6 15.03) 2.6 15.0

4.6 23.53) 4.6 15.0

9.6 23.5 – –

13.0 30.0 – –

®®

www.lemo.com

Cable diameter range (mm)

Collet for fitting

Collet a bend relief

min. max. min. max.

Series

001)

Note:

1) for multipole only.

2) for unipole only.

3) for these series the maximum cable diameter require models with oversized cable collet (type K).

1.1 3.4 1.1 3.4

1.5 5.5 1.5 5.0

2.2 7.5 2.2 7.0

1.5 9.7 1.5 9.0

4.1 11.7 4.1 11.0

5.1 16.0 5.1 15.0

9.6 25.0 9.6 15.5

1.0 5.0 1.0 5.0

1.3 8.53) 1.3 8.5

1.3 10.53) 1.3 10.5

2.6 15.03) 2.6 15.0

4.6 23.53) 4.6 15.0

9.6 23.5 – –

Cable diameter range (mm)

Collet for fitting

Collet a bend relief

min. max. min. max.

Series

002)

1.0 5.0 1.0 5.0

1.3 8.53) 1.3 8.5

1.3 10.53) 1.3 10.5

2.2 8.1 2.2 8.1

4.5 7.9 4.5 7.9

3.1 7.5 3.1 7.0

Cable diameter range (mm)

Collet for fitting

Collet a bend relief

min. max. min. max.

Series

Verify if the selected connector size fits to your cable diameter.

Verify the fitting to your cable

K SERIES (watertight)

B SERIES

FIG

FGG

FFG

FGG

FEG

FNG

JGG

FDG

EJG



EPG

EZG

CFF, CRG

PHG

PNG

FGGFGG

FGY

FTG

ENG

ENY

FAG

FWG EGG

EHG

EKG

ENG

ESG

EEG

ECG

EFG

ECG

EYG

XPF

XBG, EXG

PEG

PKG

PFG



YHG

HCG

HGG HHG

HNG HMG

HEG FVG

FVB

ESG

XRB

FHG

FKG

FPG

FMG

B Series

B series connectors provide the following main features:

– security of the Push-Pull self-latching system – multipole types 2 to 64 contacts

– solder, crimp or print contacts (straight or elbow) – high packing density for space savings

– multiple key options to avoid cross mating – keying system («G» key standard)

of similar connectors for connector alignment

– 360° screening for full EMC shielding.

Fixed plugs Straight plugs Fixed sockets Free sockets

Elbow plugs

Fixed sockets

Fixed coupler

Fixed socketsStraight plugs

Elbow sockets

Bridge plugsPlug with two

parallel sockets

Plastic housing models (page 24)

Metal housing models (page 12)

Bridge models (page 29)

Elbow socket models (page 22)

Fixed

plug

Fixed sockets Fixed

coupler

Watertight or vacuumtight models (page 26)

Straight plugs Fixed socket

Elbow socket

Threaded-latching models (page 30)

10 www.lemo.com

345

1654273

11www.lemo.com

FG G 1B

Insert configuration: (page 45)

Cable ø: (page 52)

Collet type: (page 52)

Variant: (page 54)

306

Series: (page 12)

Model: (page 12)

Alignment key: (page 31)

CLAD62

Fixed socket EG G 1B 306 CYM

Housing: (page 50)

Insulator: (page 50)

Contact: (page 50)

Variant: (page 54)

Coupler RJ G 1B 306 CLA

Part Numbering System

Plug

PH G 1B 306 CLLD62

Free socket

.. .

Fixed socket:

EGG.1B.306.CYM = fixed socket, nut fixing, with key (G), 1B series, multipole type with 6 contacts, outer shell in chrome-

plated brass, PEEK extended insulator, female crimp contacts.

Part Section Showing Internal Components

Fixed socket

outer shell

earthing crown

retaining ring

hexagonal nut

locking washer

insulator

female contact

Straight plug

outer shell

latch sleeve

collet nut

split insert carrier

insulator

male contact

collet

Fixed coupler:

RJG.1B.306.CLA = straight fixed coupler with keys (J) at the flange end and key (G) at the other end, 1B series, multipole

type with 6 contacts, outer shell in chrome-plated brass, PEEK insulator, male-female contacts.

Part Number Example

Free socket:

PHG.1B.306.CLLD62Z = free socket with key (G) and cable collet, 1B series, multipole type with 6 contacts, outer shell

in chrome-plated brass, PEEK insulator, female solder contacts, D type collet for 6.0 mm diameter cable and nut for fitting

a bend relief.

Straight plug with cable collet:

FGG.1B.306.CLAD62 = straight plug with key (G) and cable collet, 1B series, multipole type with 6 contacts, outer shell in

chrome-plated brass, PEEK insulator, male solder contacts, D type collet for 6.0 mm diameter cable.

12 www.lemo.com

®®

ø A

S 1

S 2

JGG Straight plug, short version, key (G),

cable collet

9.5 32.0 22.0 8.0 7

Reference

Model Series

Dimensions (mm)

ALMS1 S2

JGG 0B

ø A

S 1

S 2

FGG Straight plug, key (G) or keys

(A…M and R), cable collet

Reference

Model Series

S 2

S 1

ø A

FGG 001)

FGG 0B

FGG 1B

FGG 2B

FGG 3B

FGG 4B

FGG 5B

6.4 28.5 20.5 5.5 5

9.5 36.0 26.0 8.0 7

12.0 43.0 32.0 10.0 9

15.0 50.0 38.0 13.0 12

18.0 58.0 43.0 15.0 14

25.0 75.0 57.0 21.0 20

35.0 103.0 78.0 31.0 30

Dimensions (mm)

ALMS1 S2

FGG Straight plug, key (G) or keys (A…M),

cable collet and nut for fitting a bend relief 2)

Reference

Model Series

FGG 001)

FGG 0B

FGG 1B

FGG 2B

FGG 3B

FGG 4B

6.4 28.7 20.7 5.5 6

9.5 35.0 25.0 8.0 7

12.0 42.0 31.0 10.0 9

15.0 49.0 37.0 13.0 12

18.0 56.5 41.5 15.0 15

25.0 71.0 53.0 21.0 20

Dimensions (mm)

ALMS1 S2

Note: 1) the surface design of the 00 series is different.

2) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 141).

Note: 1) the surface design of the 00 series is different.

M4 Cable assembly (page 161)

Cable assembly

(page 161)

Cable assembly

(page 161)

Technical Characteristics

Electrical

at 10 MHz

at 1 GHz

Characteristics

> 75 dB IEC 60169-1-3

> 40 dB IEC 60169-1-3

Value Standard

Shielding

efficiency

Note:

the various tests have been carried out with FGG and EGG connector

pairs, with chrome-plated brass shell and PEEK insulator.

Detailed electrical characteristics, as well as materials and treatment are

presented in the chapter Technical Characteristics on page 171.

> 5000 cycles IEC 60512-5 test 9a

up to 95% at 60° C

- 55° C, +250° C

10-2000 Hz, 15 g IEC 60512-4 test 6d

100 g, 6 ms IEC 60512-4 test 6c

> 1000h IEC 60512-6 test 11f

IP50 IEC 60529

5</