MBR20H200CT, MBRF20H200CT, SB20H200CT-1
www.vishay.com Vishay General Semiconductor
Revision: 21-Nov-12 1Document Number: 88786
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Dual Common-Cathode High-Voltage Schottky Rectifier
Low Leakage Current 5.0 μA
FEATURES
• Guardring for overvoltage protection
• Low power loss, high efficiency
• Low forward voltage drop
• High frequency operation
• Solder dip 275 °C max., 10 s per JESD 22-B106
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in high frequency inverters, freewheeling, and
polarity protection application.
MECHANICAL DATA
Case: TO-220AB, ITO-220AB, and TO-262AA
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant and commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
PRIMARY CHARACTERISTICS
IF(AV) 2 x 10 A
VRRM 200 V
IFSM 290 A
VF 0.75 V
TJ max. 175 °C
TO-262AA
MBR20H200CT MBRF20H200CT
SB20H200CT-1
CASE
PIN 2
PIN 1
PIN 3
1
12
2 3
3
TO-220AB
123
ITO-220AB
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER SYMBOL MBR20H200CT UNIT
Maximum repetitive peak reverse voltage VRRM 200 V
Working peak reverse voltage VRWM 200 V
Maximum DC blocking voltage VDC 200 V
Maximum average forward rectified current total device IF(AV)
20 A
per diode 10
Peak forward surge current 8.3 ms single half sine-wave superimposed
on rated load per diode IFSM 290 A
Peak repetitive reverse current per diode at tp = 2 μs, 1 kHz IRRM 1.0 A
Peak non-repetitive reverse surge energy per diode (8/20 μs waveform) ERSM 20 mJ
Non-repetitive avalanche energy per diode at 25 °C, IAS = 2.0 A, L = 10 mH EAS 20 mJ
Electrostatic discharge capacitor voltage
human body model air discharge: C = 100 pF, R = 1.5 kVC25 kV
Voltage rate of change (rated VR) dV/dt 10 000 V/μs
Operating junction and storage temperature range TJ, TSTG - 65 to + 175 °C
Isolation voltage (ITO-220AB only) from terminals to heatsink t = 1 min VAC 1500 V
MBR20H200CT, MBRF20H200CT, SB20H200CT-1
www.vishay.com Vishay General Semiconductor
Revision: 21-Nov-12 2Document Number: 88786
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
Note
(1) AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
Fig. 1 - Forward Derating Curve (Total) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Per Diode
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER TEST CONDITIONS SYMBOL TYP. MAX. UNIT
Maximum instantaneous forward voltage
per diode
IF = 10 A TC = 25 °C
VF (1)
0.81 0.88
V
IF = 10 A TC = 125 °C 0.65 0.75
IF = 20 A TC = 25 °C 0.87 0.97
IF = 20 A TC = 125 °C 0.74 0.85
Maximum reverse current per diode
at working peak reverse voltage
TJ = 25 °C IR (1) 5.0 μA
TJ = 125 °C 1.0 mA
Typical junction capacitance 4.0 V, 1 MHz CJ250 pF
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER SYMBOL MBR MBRF SB UNIT
Typical thermal resistance per diode RJC 2.0 4.0 2.0 °C/W
ORDERING INFORMATION (Example)
PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE
TO-220AB MBR20H200CT-E3/45 2.06 45 50/tube Tube
ITO-220AB MBRF20H200CT-E3/45 2.20 45 50/tube Tube
TO-262AA SB20H200CT-1E3/45 1.58 45 50/tube Tube
0
5
10
15
20
25
MBRF
MBR, MBRB
25 50 75 100 125 150 175
Case Temperature (°C)
Average Forward Current (A)
0
25
50
75
100
125
150
175
200
225
250
275
300
325
350
1 10 100
Number of Cycles at 60 Hz
Average Forward Current (A)
MBR20H200CT, MBRF20H200CT, SB20H200CT-1
www.vishay.com Vishay General Semiconductor
Revision: 21-Nov-12 3Document Number: 88786
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode
Fig. 4 - Typical Reverse Characteristics Per Diode
Fig. 5 - Typical Junction Capacitance Per Diode
Fig. 6 - Typical Transient Thermal Impedance Per Diode
100
10
0.1
1
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
T
J
= 125 °C
T
J
= 175 °C
T
J
= 25 °C
T
J
= 75 °C
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1
0.1
0.01
1
10
100
1000
Percent of Rated Peak Reverse Voltage (%)
10 000
T
J
= 125 °C
T
J
= 175 °C
T
J
= 25 °C
T
J
= 75 °C
10 20 30 40 50 60 70 80 90 100
Instantaneous Reverse Current (µA)
100
1000
10 000
0.1 1 10 100
10
Reverse Voltage (V)
Junction Capacitance (pF)
0.01 101 100
10
100
0.1
0.1
1
MBRF
MBR, MBRB
t - Pulse Duration (s)
Transient Thermal Impedance (°C/W)
MBR20H200CT, MBRF20H200CT, SB20H200CT-1
www.vishay.com Vishay General Semiconductor
Revision: 21-Nov-12 4Document Number: 88786
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AB
0.398 (10.10)
0.382 (9.70)
0.055 (1.40)
0.047 (1.20) 0.343 (8.70)
TYP.
0.067 (1.70)
TYP.
0.331(8.40)
TYP.
0.150 (3.80)
0.139 (3.54)
DIA.
0.114 (2.90)
0.106 (2.70)
0.634 (16.10)
0.618 (15.70)
PIN
2
3
1
0.118 (3.00)
TYP.
0.035 (0.90)
0.028 (0.70)
0.064 (1.62)
0.056 (1.42)
0.200 (5.08) TYP.
0.100 (2.54)
TYP.
0.638 (16.20)
0.598 (15.20)
0.055 (1.40)
0.049 (1.25)
0.185 (4.70)
0.169 (4.30)
0.154 (3.90)
0.138 (3.50)
0.370 (9.40)
0.354 (9.00)
0.523 (13.28)
0.507 (12.88)
0.102 (2.60)
0.087 (2.20)
1.161 (29.48)
1.106 (28.08)
0.024 (0.60)
0.018 (0.45)
0.024 (0.60)
0.018 (0.45)
0.138 (3.50)
0.122 (3.10)
1.29 (3.28)
1.21 (3.08)
0.100
(2.54) TYP. 0.200 (5.08)
TYP.
0.058 (1.47)
MAX.
0.024 (0.60)
0.039 (1.00)
0.108 (2.74)
0.092 (2.34)
0.117 (2.96)
0.101 (2.56)
0.633 (16.07)
0.601 (15.67)
0.630 (16.00)
0.614 (15.60)
DIA.
0.320 (8.12)
0.304 (7.72)
0.396 (10.05)
0.372 (9.45)
PIN
0.408 (10.36)
0.392 (9.96)
ITO-220AB
0.270 (6.88)
0.255 (6.48)
0.264 (6.70)
0.248 (6.50)
0.193 (4.90)
0.177 (4.50)
123
0.370 (9.40)
0.354 (9.00)
0.523 (13.28)
0.507 (12.88)
0.425 (10.80)
0.393 (10.00)
0.102 (2.60)
0.087 (2.20)
0.185 (4.70)
0.169 (4.30)
0.055 (1.40)
0.049 (1.25)
0.024 (0.60)
0.018 (0.45)
0.405 (10.28)
0.389 (9.88)
0.062 (1.57)
0.054 (1.37)
0.055 (1.40)
0.039 (1.00)
0.488 (12.4)
0.472 (12.00)
K
0.100
(2.54) TYP. 0.200 (5.08) TYP.
0.028 (0.70)
0.035 (0.90)
0.398 (10.10)
0.382 (9.70)
TO-262AA
PIN
123
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
