SENSITRON
SEMICONDUCTOR
• 221 West Industr y Court 3 Deer Par k, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web Si te - http:// www.se nsitron.com • E-Mail Address - sales@sensit r on.com •
SPxxxxSA/B/C
Technical Data
Data Sheet 1253, Rev. A
TWO TERMINAL THYRISTOR SERIES
SURFACE MO UNT SMB AND AXIAL LEAD DO-15
TWO TERMINAL THYRISTOR SURGE SUPPRESSOR
FEATURES:
·UL94V-0 Flammability Classification ·Peak Off-State Voltage from 90 to 360 volts
·ESD Protection >40 kilovolts ·Meet IEC61000-4-4 & -5 Industry Requirement
·Low Capacitance for T1/E1 Trunk and Line ·Provides Protection in Accordance with FCC
Card Application Part 68,UL1459,Bellcore 1089,ITU-TK. 20 & K. 21
·High Surge Current Capability
(See Electrical Characteristics)
DO-204AC (DO-15) DO-214AA (SMB J-Bend)
MECHANICAL DATA MECHANICAL DATA
Case: JEDEC DO-15 Molded plastic over Case: JEDEC DO-214AA Molded plastic over
passivated Junction passivated junction
Terminals: Tin Plated Axial leads, solderable per Terminal: Solder plated, solderable per
MIL-STD-750, Method 2026 MIL-STD-750, Method 2026
Mounting Position: Any Standard Packaging: 12mm tape
(EIA STD RS-481)
Weight: 0.015 ounce, 0.4 gram Weight: 0.003 ounce, 0.093 gram
1.0 (25.4)
MIN.
0.140 (3.6)
0.104 (2.6)
DIA.
0.034 (0.86)
0.028 (0.71)
DIA.
Dimensions in inches and(millimeters)
0.300 (7.6)
0.230 (5.8)
1.0 (25.4)
MIN.
0.155 (3.94)
0.130 (3.30)
0.086 (2.20)
0.077 (1.95)
0.180 (4.57)
0.160 (4.06)
0.096 (2.44)
0.084 (2.13)
0.220 (5.59)
0.205 (5.21)
0.060 (1.52)
0.030 (0.76)
Dimensions in inches and(millimeters)
0.012 (0.305)
0.006 (0.152)
0.008 (0.203) MAX.
SENSITRON
SEMICONDUCTOR
• 221 West Industr y Court 3 Deer Park, NY 11729-4681 3 (631) 586- 7600 FAX (631) 242-9798 •
• World Wid e We b Site - http: //www.sensitron.com • E- Mail Address - sales@sensitron.com •
SPxxxxSA/B/C
Data Sheet 1253, Rev. A
MARKING CODE
PART
NUMBER
FOR AXIAL
DO-15
PACKAGE
FOR SMB
PACKAGE
REPETITEVE
PEAK
OFF-STAGE
VOLTAGE
VDRM
(VOLTS)
SWITCHING
VOLTAGE
@100V/us
Vs
(VOLTS)
MINIMUM
HOLDING
CURRENT
dl/dt=1A/ms
IH
(mA)
SWITCHING
CURRENT
Is
(mA)
SURGE
RATINGS
IPP
10*1000µS
(Amps)
ON-STAGE
CURRENT
IT
(A)
TYPICAL
CAPACITANCE
@50V,1MHz
(pF)
SP1100SA SP1100SAL GF 90 130 150 800 50 1 60
SP1300SA
SP1500SA
SP1800SA
SP2300SA
SP1300SAL
SP1500SAL
SP1800SAL
SP2300SAL
GG
GH
GI
GJ
120
140
160
190
160
180
220
260
150
150
150
150
800
800
800
800
50
50
50
50
1
1
1
1
40
40
40
30
SP2600SA
SP3100SA
SP3500SA
SP4000SA
SP2600SAL
SP3100SAL
SP3500SAL
SP4000SAL
GK
GL
GM
GO
220
275
300
360
300
350
400
450
150
150
150
150
800
800
800
800
50
50
50
50
1
1
1
1
30
30
30
30
SP1100SB SP1100SBL GS 90 130 150 800 80 1 100
SP1300SB
SP1500SB
SP1800SB
SP2300SB
SP1300SBL
SP1500SBL
SP1800SBL
SP2300SBL
GT
GU
GV
GW
120
140
160
190
160
180
220
260
150
150
150
150
800
800
800
800
80
80
80
80
1
1
1
1
70
70
70
50
SP2600SB
SP3100SB
SP3500SB
SP4000SB
SP2600SBL
SP3100SBL
SP3500SBL
SP4000SBL
GX
GY
GZ
GN
220
275
300
360
300
350
400
450
150
150
150
150
800
800
800
800
80
80
80
80
1
1
1
1
50
40
40
40
SP1100SC SP1100SCL HF 90 130 150 800 100 1 100
SP1300SC
SP1500SC
SP1800SC
SP2300SC
SP1300SCL
SP1500SCL
SP1800SCL
SP2300SCL
HG
HH
HI
HJ
120
140
160
190
160
180
220
260
150
150
150
150
800
800
800
800
100
100
100
100
1
1
1
1
70
70
70
50
SP2600SC
SP3100SC
SP3500SC
SP4000SC
SP2600SCL
SP3100SCL
SP3500SCL
SP4000SCL
HK
HL
HM
HS
220
275
300
360
300
350
400
450
150
150
150
150
800
800
800
800
100
100
100
100
1
1
1
1
50
40
40
40
Maximum Off–State Current @ VDRM : 5 µA
Maximum On-State Voltage @ I T : 5 Volts
For AXIAL devices, use suffix L (e.g. P3100S AL). Electrical characteristi cs apply in both AXIAL and Surface Mounted Devices.
Fig.1 Pul se Wa v e For m Example
0
50
100
0 1000 2000 3000
t - Time - µs
I
PP
– Peak Pulse Current - %I
PP
Test
Waveform
Example
tr 10 µs
td = 1000 µs
Half V a lue: IPP / 2 = td
Peak Value
e
-1
tr
Fig.2 Typical Peak Off-State Current vs Junction
Temperature
0.01
0.1
1
10
-40 0 40 80 120
tj - Temperature - C
IDRM - Peak Off-State Current - µA
SENSITRON
SEMICONDUCTOR
• 221 West Industr y Court 3 Deer Par k, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web Si te - http:// www.se nsitron.com • E-Mail Address - sales@sensit r on.com •
SPxxxxSA/B/C
Data Sheet 1253, Rev. A
Fig.3 Typical On-State Current vs On-State Voltage
1
10
100
01234567
VT - On-State Voltage - V
IT - On-State Current - A
SPxxxxSA
SPxxxxSC
SPxxxxSB
Fig.4 Typical Holding Current Vs Junction Temperat ur e
0
0.5
1
1.5
2
2.5
-40 0 40 80 120
tj- Temperature - C
IH / IH (tj 25 )
Fig.5 Typical normalized VS vs Junction Temperature
0.8
0.85
0.9
0.95
1
1.05
1.1
1.15
-40 0 40 80 120
tj - Temperature -C
Normalized Vs
Fig.6 O n- S t a t e C urre nt v s S urge C urre nt
1
10
100
1 10 100 1000
Surge Current Duration - Full Cycles
Non-Repetitive On-State Current (I
TSM
)
(Amps)
Supply Frequency: 60Hz Sinusoidal
Load: Res istive
Rms On-State Current(I
T(RMS)
):
Maximum
SPxxxxS
SPxxxxS
SPxxxxS
IPP
ITSM
IT
IS
IH
IRM
VTVRM
VS
Fig.7 V - I Characteristics Curve
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that ma y result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
